Synthetic, Mechanistic, and Structural Studies Related to 1,2,4-Dithiazolidine-3,5-dione

Reaction of O-ethyl thiocarbamate (4) with (chlorocarbonyl)sulfenyl chloride (5) gives 3-ethoxy-1,2,4-dithiazolin-5-one (2) and 3,5-diethoxy-1,2,4-thiadiazole (3), with the relative amounts of 2 and 3 formed depending very much on the solvent (e.g., diethyl ether favors 2; chloroform favors 3). The effects of added base, order of addition, concentration, and temperature were also studied. Mechanisms for the observed transformations have been proposed and are supported by the characterization of relatively unstable acyclic intermediates, e.g., formimidoyl(chlorocarbonyl)disulfane 8, symmetrical bis(formimidoyl)disulfane 10, and ethoxythiocarbonyl imidate 11, which are obtained under alternative conditions. Compound 2 is converted with concentrated aqueous hydrochloric acid upon short reflux to 1,2,4-dithiazolidine-3,5-dione (1), rearranges upon prolonged melting to give principally N-ethyl-1,2,4-dithiazolidine-3,5-dione (13), and is desulfurized with various trivalent phosphorus compounds to yield O-ethyl cyanate (15) plus carbonyl sulfide. X-ray crystallographic structures of 1 and 2 have been solved; the planarity and aromatic character of these molecules help to explain some of their reactions.     

Synthesis of new organophosphorus‐substituted mono‐ and bis(trimethylsilyl)amines with PCH2N fragments and their derivatives

Convenient procedures for the synthesis of new organophosphorus‐substituted mono‐ and bis(trimethylsilyl)amines with PCH₂N moiety are proposed, starting from trimethylsilyl esters of organophosphorus acids, as well as 1,3,5‐trialkylhexahydro‐1,3,5‐triazines and N‐alkoxymethyl bis(trimethylsilyl)amines as aminomethylating reagents. Certain properties of the resulting compounds are presented. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:71–77, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20580     

High trans selectivity in the copper bis(oxazoline)-catalyzed asymmetric cyclopropanation of olefins by (trimethylsilyl)diazomethane

Copper(I) bis(oxazoline) species are among the most enantioselective cyclopropanation catalysts that have been reported, although these catalysts generally give low diastereoselectivities. We have observed greatly improved diastereoselectivities using (trimethylsilyl)diazomethane as the carbon source. We have also identified several bis(oxazoline) species that also give comparable or higher enantioselectivities with (trimethylsilyl)diazomethane compared to the more readily available ethyl diazoacetate. The application of this methodology to several olefins has been explored.     

Synthese,Eigenschaften und Struktur von Amin-Addukten der Lithium-tris[bis(trimethylsilyl)methyl]zinkate

Synthesis, Properties, and Structure of the Amine Adducts of Lithium Tris[bis(trimethylsilyl)methyl]zincates . Bis[bis(trimethylsilyl)methyl]zinc and the aliphatic amine 1,3,5-trimethyl-1,3,5-triazinane (tmta) yield in n-pentane the 1:1 adduct, the tmta molecule bonds as an unidentate ligand to the zinc atom. Bis[bis(trimethylsilyl)methyl]zinc · tmta crystallizes in the triclinic space group P1 with {a = 897.7(3); b = 1 114.4(4); c = 1 627.6(6) pm; α = 90.52(1); β = 103.26(1); γ = 102.09(1)°; Z = 2}. The central C₂ZnN moiety displays a nearly T-shaped configuration with a CZnC angle of 157° and Zn? C bond lengths of 199 pm. The Zn? N distances of 239 pm are remarkably long and resemble the loose coordination of this amine; a nearly complete dissociation of this complex is also observed in benzene. The addition of aliphatic amines such as tmta or tmeda to an equimolar etheral solution of lithium bis(trimethylsilyl)methanide and bis[bis(trimethylsilyl)methyl]zinc leads to the formation of the amine adducts of lithium tris[bis(trimethylsilyl)methyl]zincate. Lithium tris[bis(trimethylsilyl)methyl]zincate · tmeda · 2 Et₂O crystallizes in the orthorhombic space group Pbca with {a = 1 920.2(4); b = 2 243.7(5); c = 2 390.9(5) pm; Z = 8}. In the solid state solvent separated ions are observed; the lithium cation is distorted tetrahedrally surrounded by the two nitrogen atoms of the tmeda ligand and the oxygen atoms of both the diethylether molecules. The zinc atom is trigonal planar coordinated; the long Zn? C bonds with a value of 209 pm can be attributed to the steric and electrostatic repulsion of the three carbanionic bis(trimethylsilyl)methyl substituents.     

Synthesis and characterization of sodium bis(trimethylstannyl) amide and bis(trimethylsilyl) bis(trimethylstannyl) -phospha-tetrazene

Sodium bis(trimethylstannyl)amide NaN(SnMe₃)₂, isolated by the reaction of trimethylstannyldiethylamine with sodium amide, reacts with tris(trimethylsilyl)hydrazino—dichloro-phosphine to form bis(trimethylsilyl)bis(trimethylstannyl)-2-phospha-2-tetrazene, (Me₃Si)₂N-N=P-N(SnMe₃)₂. Both the molecules have been isolated and characterized.     

The double base impact in the dehydrochlorination of 1,2‐bis[bis(trimethylsilyl)methylchlorophosphino]ethane

1,2‐Bis[bis(trimethylsilyl)methylchlorophosphino]ethane was prepared by the reaction of 1,2‐bis(dichlorophosphino)ethane and the Grignard reagent of bis(trimethylsilyl)chloromethane. It adds DBN (1,5‐diazabicyclo[4.3.0]non‐5‐ene) in a 1:2 ratio. Subsequent treatment with t‐BuLi converts the adduct to a condensation product, which in its enamine form reacts with MgCl₂ (still present from the preparation of 1 ) to give the cyclic magnesium diamide 2 . By additional coordination of the two phosphine sites of the condensation product, 2 attains a tricyclic structure. An unchanged DBN molecule completes the pentacoordination of the magnesium atom. The structure of product 2 has been determined by single crystal X‐ray diffraction. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:197–199, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10122     

‘One-flask’ transformation of isocyanates and isothiocyanates to guanidines hydrochloride by using sodium bis(trimethylsilyl)amide

A ‘one-flask’ synthesis of guanidines was developed by reacting isocyanates and isothiocyanates with sodium bis(trimethylsilyl)amide followed by addition of primary or secondary amines with a catalytic amount of AlCl₃. The desired guanidines were obtained in good yields and the reaction was applicable to aliphatic and aromatic substrates. A plausible mechanism was proposed through the generation of cyanamide anion from isocyanates or isothiocyanates with sodium bis(trimethylsilyl)amide. Addition of amines and catalytic amount of AlCl₃ smoothly converted the cyanamides to the desired guanidines.     

Silica Chloride (SiO2-Cl) and Trimethylsilyl Chloride (TMSCl) Promote Facile and Efficient Dehydration of Tertiary Alcohols

Abstract

Silica chloride (SiO₂-Cl), as a heterogeneous reagent, has been used for the efficient dehydration of tertiary alcohols under mild reaction conditions. For comparison, we have also used trimethylsilyl chloride (TMSCl) as a homogeneous reagent for this purpose. We have found that silica chloride is a more efficient reagnet than trimethylsilyl chloride for this purpose. Handling of SiO₂-Cl is much safer and easier than TMSCl, especially for large-scale operation. The selectivity of the method is also demonstrated by several competitive reactions. Ether formation, rearranged products, and polymerization have not been observed in the reactions.     

A general method for the synthesis of alkylenedithio- and bis(alkylenedithio)tetraselenafulvalenes

A general synthetic method toward a series of alkylenedithio- and bis(alkylenedithio)tetraselenafulvalenes, i.e., methylenedithio- (MDT-TSF, 1a), ethylenedithio- (EDT-TSF, 1b), propylenedithio- (PDT-TSF, 1c), bis(methylenedithio)- (BMDT-TSF, 2a), bis(ethylenedithio)- (BETS, 2b), and bis(propylenedithio)tetraselenafulvalene (BPDT-TSF, 2c), as superior electron donors for organic conductors has been developed. This method is advantageous to ready access to a series of compounds from common synthetic intermediates, 2-methylthio-3-(2-methoxycarbonylethylthio)-tetraselenafulvalene (6) and 2,6(7')-bis(methylthio)-3,7(6')-bis(2-methoxycarbonylethylthio)tetraselenafulvalene (7), for the asymmetrical alkylenedithio- and symmetrical bis(alkylenedithio)-TSFs, respectively. These key intermediates are readily prepared by phosphite-promoted coupling reactions of 4-methylthio-5-(2-methoxycarbonylethylthio)-1,3-selenole-2-selone (5) or by a reaction of TSF with LDA and methyl 3-thiocyanatopropionate. The latter method provides not only the successful conversion of TSF to these heterocycle derivatives but also a generally acceptable route to them, since TSF is accessible without the toxic and less easily available CSe(2).     

Synthesis of volatile bis[bis(trimethylsilyl)amide]-substituted boron derivatives

Russian Journal of General Chemistry - General strategy for the synthesis of organoboron compounds containing bis(trimethylsilyl)amide substituents has been suggested.     

Structure and reactivity of bis(iodozincio)methane solution

Bis(iodozincio)methane, which has been shown to be an efficient reagent for organic synthesis, is obtained as THF solution. The structural information about the reagent as THF solution was corrected by small angle neutron scattering and by anomalous X-ray scattering. Those scattering experiments implied that the prepared bis(iodozincio)methane exists without forming any oligomer or aggregate. A coordination of tetrahydrothiophene to bis(iodozincio)methane enhances the nucleophilicity of the reagent and stabilizes its monomeric structure in the solution.     

Über einige nebenprodukte der thermolyse von bis(trimethylsilyl)-diimin

In the course of decomposition of bis(trimethylsilyl)diimine (BSD), which leads mainly to five products, the tris(trimethylsilyl)hydrazyl radical is formed among other intermediates. This radical reacts with hydrogen donors HR (e.g. HR = solvent) to tris(trimethylsilyl)hydrazine and radicals ·R, which on the other hand react further with BSD to by-products of BSD thermolysis. The types of these by-products and mechanisms of their formation are discussed. The thermolysis of BSD in toluene, for example, produces tris- and bis(trimethylsilyl)benzylhydrazine and bis(trimethylsilyl)benzalhydrazone.     

Preliminary evaluation of biacetyl bis(2-pyridyl)hydrazone as an analytical reagent

With the purpose of introducing biacetyl bis(2-pyridyl)hydrazone as an analytical reagent, the pyridylhydrazone literature has been reviewed. BBPH acts as a general chromogenic reagent. The fundamental solution chemistry of the complexes formed by BBPH with the metal ions has been studied. BBPH appears to be a promising reagent for the colorimetric estimation of cobalt and palladium. It may be advantageously compared with benzil bis(2-pyridyl) hydrazone which has the same basic chelate structure.     

Difunctional heterocycles: A convenient one pot synthesis of novel bis(benzoxazoles) from bis(o-aminophenols)

New bis(benzoxazoles) 14 and 17 have been synthesized in excellent yields from the corresponding bis(o-aminophenols) by refluxing with triethyl orthoformate. 6,6′-Bis(benzoxazole) ( 14 ) has also been prepared utilizing Gold's reagent. Compound 14 is inert to Reissert reaction conditions. However, the Reissert reaction on 5,5′-bis(benzoxazole) (17) led to ring opened product 20 .     

Reaction of bis(trimethylsiloxy)phosphine with trimethylsilane

Bis(trimethylsilyl) [3-(trimethylsilyl)propyl]phosphonate and trimethylsilyl [3-(trimethylsilyl)propyl]-phosphinate are obtained by the reaction of bis(trimethylsiloxy)phosphine with trimethylallylsilane and converted into [3-(trimethylsilyl)propyl]phosphinic and [3-(trimethylsilyl)propyl]phosphonic acid, respectively, by the reaction with methanol.     

Kinetic study of the phenolysis of bis(4-nitrophenyl) carbonate, bis(4-nitrophenyl) thionocarbonate, and methyl 4-nitrophenyl thionocarbonate

The reactions of a homogeneous series of phenols with bis(4-nitrophenyl) carbonate (BNPC), bis(4-nitrophenyl) thionocarbonate (BNPTOC), and methyl 4-nitrophenyl thionocarbonate (MNPTOC) are subjected to a kinetic investigation in water, at 25.0 degrees C and ionic strength of 0.2 M (KCl). Under excess of phenol over the substrate, all the reactions obey pseudo-first-order kinetics and are first order in phenoxide anion. The reactions of BNPC show a linear Br?nsted-type plot with slope beta = 0.66, consistent with a concerted mechanism (one step). In contrast, those of BNPTOC and MNPTOC show biphasic Br?nsted-type plots with slopes beta = 0.30 and 0.44, respectively, at high pK(a), and beta = 1.25 and 1.60, respectively, at low pK(a), consistent with stepwise mechanisms. For the reactions of both thionocarbonates, the pK(a) value at the center of the Br?nsted plot (pK(a)(0)) is 7.1, which corresponds to the pK(a) of 4-nitrophenol. This confirms that the phenolyses of the thionocarbonates are stepwise processes, with the formation of an anionic tetrahedral intermediate. By the comparison of the kinetics and mechanisms of the title reactions with similar reactions, the following conclusions can be drawn: (i) Substitution of S(-) by O(-) in an anionic tetrahedral intermediate (T(-)) destabilizes it. (ii) The change of MeO by 4-nitrophenoxy in T(-) results in an increase of both the rate constant and equilibrium constant, for the formation of T(-), and also in an enlargement of the rate coefficient for the expulsion of 4-nitrophenoxide from T(-). (iii) Substitution of an amino group in a tetrahedral intermediate by ArO destabilizes it. (iv) Secondary alicyclic amines and other amines show greater reactivity toward MNPTOC than isobasic phenoxide anions.     

Tris[bis(trimethysilyl)amido]zinkate von Lithium und Calcium

Tris[bis(trimethylsilyl)amido]zincates of Lithium and Calcium Calcium-bis[bis(trimethylsilyl)amide] and Bis[bis(trimethylsilyl)amido]zinc yield in 1,2-dimethoxyethane quantitatively Calcium-bis{tris[bis(trimethylsilyl)- amido]zincate} · 3DME. When THF is chosen as a solvent, the two reactants and the zincate form a temperature-independent equilibrium, whereas in benzene no reaction occurs. The tris[bis(trimethylsilyl)amido]zincate anion displays characteristic ¹³C{¹H) and ²⁹Si{¹H] chemical shifts of 7 and ?8 ppm, respectively; the nature of the solvent, the cation and the complexating ligands don't influence the IR nor NMR data of the zincate anion and thus verify that [Ca(DME)₃]²⁺ and {Zn[N(SiMe_{3 2}]₃}^? appear as solvent separated ions, which is also confirmed by their insolubility in hydrocarbons.     

Trimethylsilyl bis(Fluorosulfonyl)imide : An Efficient Catalyst for the Addition of Trimethylsilyl Cyanide to Carbonyl Compounds

In the presence of 1 mol% of trimethylsilyl bis(fluorosulfonyl)imide, trimethylsilyl cyanide adds efficiently to carbonyl compounds. The catalyst has been found to be more active than trimethylsilyl triflate for the above reaction.     

Sulfonation of aromatic and heterocyglic compounds with bis(trimethylsilyl) sulfate

Conclusions A new sulfonating agent, namely bis(trimethylsilyl) sulfate, was found, which easily sulfonates benzene derivatives that contain substituents of the first type, and also thiophene. Benzene and nitrobenzene do not react with bis (trimethylsilyl) sulfate.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 10, pp. 2340–2341, October, 1977.     

Synthese von substituierten Calcium-bis(disilylamiden) mittels der Transmetallierung von Zinn(II)- und Zinn(IV)-amiden

Synthesis of Substituted Calcium-bis(disilylamides) by Transmetalation of Tin(II) and Tin(IV) Amides Stannylenes as well as stannanes with substituted disilylamino groups are valuable synthons for the synthesis of alkaline earth metal bis(disilylamides) via the transmetallation reaction. Whereas bis[2,2,5,5-tetramethyl-2,5-disilaaza-cyclo-pentyl]stannylene 1 is a suitable reagent for this type of reaction, bis[trimethylsilyl-tris(trimethylsilyl)silylamino]stannylene 2 (monoclinic, P2₁/c, a = 1492.6(2), b = 1705.2(2), c = 1865.3(3) pm, β = 109.03(2)º, Z = 4) is not only attacked at the Sn? N-bond but also the N? Si-bond is cleaved by calcium metal. Similar light sensitivity as for 2 is observed for the mercury bis[trimethylsilyl-tris(trimethylsilyl)silylamide] 3 , the homolytic M? N-bond cleavage leads to the formation of the trimethylsilyl-tris(trimethylsilyl)silylamino radical (g = 2.00485; a(N) = 16.2 G). The calcium tin exchange reaction of 1 in THF yields tris(tetrahydrofuran-O)calcium-bis[2,2,5,5-tetramethyl-2,5-disilaaza-cyclo-pentanide] 4 (monoclinic, P2₁/n, a = 1060.9(2), b = 1919.3(5), c = 1686.0(3) pm, β = 90.30(2)º, Z = 4). The stannanes Me_n-4Sn[N(SiMe₃)₂]_n with n = 1 or 2 are also valuable materials for the synthesis of bis(tetrahydrofuran-O)calcium-bis[bis(trimethylsilyl)amide].