Sub-micro level monitoring of beryllium ions with a novel beryllium sensor based on 2,6-diphenyl-4-benzo-9-crown-3-pyridine

The 2,6-diphenyl-4-benzo-9-crown-3-pyridine (DPCP) was used as an excellent ionophore in construction of a coated graphite poly(vinyl chloride) (PVC)-based membrane sensor. The best performance was obtained with a membrane composition of 30% poly(vinyl chloride), 60% o-nitrophenyloctyl ether (NPOE), 5% 2,6-diphenyl-4-benzo-9-crown-3-pyridine and 5% sodium tetraphenyl borate (TBP). This sensor shows very good selectivity and sensitivity towards beryllium ion over a wide variety of cations, including alkali, alkaline earth, transition and heavy metal ions. The sensor revealed a great enhancement in selectivity coefficients and sensitivity for beryllium, in comparison with the previously reported beryllium electrodes. The electrode exhibits a Nernstian behavior (with slope of 29.6 mV per decade) over a very wide concentration range (1.0×10⁻⁷ to 1.0×10⁻¹) with a detection limit of 4.0×10⁻⁸ M (360 pg ml⁻¹). It shows relatively fast response time, in whole concentration range (<10 s), and can be used for at least 12 weeks in the pH range of 4.5-8.0. The proposed sensor was successfully used to determination of beryllium in mineral ore.     

Bifunctional potentiometric sensor based on MoO3 nanorods

A solid-phase film electrode with an ion-sensitive membrane based on MoO₃ nanorods was developed. Depending on the pH of test solution, the proposed electrode can be used as a sensor for measuring the concentration of hydrogen or alkali metal ions. In the range of 1 ≤ pH ≤ 5, the electrode reacts to changes in the concentration of hydrogen ions with an electrode response slope of 54 ± 2 mV/pH. The electrode is selec- tive to alkali metal cations in the concentration ranges of $0 \leqslant pc_{M^ + } \leqslant 4$ for M = Na, K, and Li and $1 \leqslant pc_{M^ + } \leqslant 5$ for M = Rb and Cs and the solution acidity 5 ≤ pH ≤ 13.5 with a nearly theoretical slope. The selectivity coefficients of the electrode to the ions of Na(I), Rb(I), Cs(I), Mg(II), Ca(II), Sr(II), and Ba(II) were determined.     

Novel potentiometric sensor for the determination of Cd2+ based on a new nano-composite

A novel ion selective carbon paste electrode for Cd²⁺ ions based on 2,2′-thio-bis[4-methyl(2-amino phenoxy) phenyl ether] (TBMAPPE) as an ionophore was prepared. The carbon paste was made based on a new nano-composite including multi-walled carbon nanotubes (MWCNTs), nanosilica and room-temperature ionic liquid, 1-Butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF₆). The constructed nano-composite electrode showed better sensitivity, selectivity, response time, response stability and lifetime in comparison with typical Cd²⁺ carbon paste sensor for the successful determination of Cd²⁺ ions in water and in waste water samples. The best performance for nano-composite sensor was obtained with an electrode composition of 18% TBMAPPE, 20% BMIM-PF₆, 48% graphite powder, 10% MWCNT and 4% nanosilica. The new electrode exhibited a Nernstian response (29.95?±?0.10?mV?decade^?1) toward Cd²⁺ ions in the range of 3.0?×?10^?8 to 1.0?×?10^?1?mol?L^?1 with a detection limit of 7.5?×?10^?9?mol?L^?1. The potentiometric response of prepared sensor was independent of the pH of test solution in the pH range 3.0 to 5.5. It had a quick response with a response time of about 6?s. The proposed electrode showed fairly good selectivity over some alkali, alkaline earth, transition and heavy metal ions.     

A PVC-based pentathia-15-crown-5 membrane potentiometric sensor for mercury(II)

Poly(vinyl chloride) (PVC)-based membrane of pentathia-15-crown-5 exhibits good potentiometric response for Hg²⁺ over a wide concentration range (2.51 × 10⁻⁵ to 1.00 × 10⁻¹ mol dm⁻³) with a slope of 32.1 mV per decade of Hg²⁺ concentration. The response time of the sensor is as fast as 20 s. The electrode has been used for a period of six weeks and exhibits fairly good discriminating ability towards Hg²⁺ in comparison to alkali, alkaline and some heavy metal ions. The electrode can be used in the pH range from 2.7 to 5.0.     

Novel membrane potentiometric sulfate ion sensor based on zinc-phthalocyanine for the quick determination of trace amounts of sulfate.

Poly(vinyl chloride) (PVC) based membranes of zinc-phthalocyanine (ZPC) with hexadecyltrimethylammonium bromide (HTAB) as a cation excluder, and dibutyl phthalate (DBP) and benzyl acetate (BA) as plasticizing solvent mediators were prepared and investigated as a SO4(2-) selective electrode. The best performance was observed with a membrane having a composition of ZPC-PVC-HTAB-BA in a ratio of 5%:32%:3%:60%, which works well over a wide concentration range (1.0 x 10(-2) - 1.0 x 10(-6) M) with a Nemstian slope of -29.2 mV per decade of activity, between the pH values of 2.0 to 7.0. This sensor shows a very fast response time of 10 s, and can be used over a period of 2 months with good reproducibility. The proposed sensor displays excellent selectivity for SO4(2-) over a large number of common inorganic anions. The sensor has been successfully applied for the direct and indirect determination of sulfate and zinc in zinc sulfate tablets, respectively. It was also used as an indicator electrode in the potentiometric titration of sulfate ions with barium ions.     

Subnanomolar determination of a beryllium ion by a novel Be(II) microsensor based on 4-nitrobenzo-9-crown-3-ether

In this work, for the first time, we introduce a highly selective and sensitive Be(II) microsensor. 4-nitrobenzo-9-crown-3-ether (NBCE) was used as a membrane-active component to prepare a Be(II)-selective polymeric membrane microelectrode. The electrode exhibits a Nernstian response toward Be(II) ions over a very wide concentration range (1.0 × 10⁻⁴–1.0 × 10⁻¹⁰ M), with a detection limit of 3.5 × 10⁻¹¹ M (∼350 pg/L). In fact, the electrode presents a fast response time in the whole concentration range (6 s). The proposed microelectrode can be used for at least six weeks without any considerable divergence in the potentials. The proposed membrane sensor revealed a selectivity toward Be(II) ions over a wide variety of other metal ions including common alkali, alkaline-earth, and rare-earth ions. It could be used in the pH range of 3.0–11.5. The microelectrode was successfully used as an indicator electrode for the titration of 20 mL of 1.0 × 10⁻⁶ M Be²⁺ solution with 1.0 × 10⁻⁴ M of EDTA. It was also applied to the direct determination of beryllium ions in beryl and binary mixtures. The text was submitted by the authors in English.     

Lead-selective membrane potentiometric sensor based on an 18-membered thiacrown derivative.

A PVC-based membrane electrode for lead ions based on hexathia-18-crown-6-tetraone as membrane carrier was prepared. The influence of membrane composition, pH of test solution and foreign ions on the electrode performance were investigated. The electrode showed a Nernstian response over a lead concentration range from 1.0 x 10(-6) to 8.0 x 10(-3) M at 25 degrees C, and was found to be very selective, precise and usable within the pH range 3.0-6.0. The electrode was successfully used as an indicator electrode in potentiometric titration of lead ions and in direct determination of lead in water samples.     

Novel membrane-based sensor for online membrane integrity monitoring

A novel membrane-based sensor device for upstream membrane integrity monitoring has been developed and evaluated in this study. The sensor is based on relative trans-membrane pressures created by two membranes in series inside the sensor device that detects deposition from the sample stream onto the first of the sensor membranes. The sensor pressure signals can distinguish between intact or damaged membranes in the upstream membrane filtration process. Studies were conducted to evaluate both stabilities and sensitivities of the relative trans-membrane pressure monitoring technique. Sensitivity, based on the response times of the membrane sensor for particle detection, was determined for a range of operating conditions, membrane sandwich configurations, and particle concentrations in both simulated membrane failures and for actual pin-hole defects on a submerged MF membrane. The results showed that both sensitivities and stability strongly depended on membrane sandwich configurations (membrane characteristics) in the sensor, and mode of operation (pressurized or vacuum). The membrane sensor detected bentonite particles with a concentration of 0.3 mg/L (turbidity ∼0.3 NTU) in approximately 35 min in the vacuum mode. The sensor is reliable, sensitive and low cost. It has potential applications in decentralized systems or in multichannel monitoring of local conditions in a large plant. Possible applications of the membrane sensor for fouling monitoring are also discussed.     

Screen-printed sensor for batch and flow injection potentiometric chromium(VI) monitoring

A disposable screen-printed electrode was designed and evaluated for direct detection of chromium(VI) in batch and flow analysis. The carbon screen-printed electrode was modified with a graphite–epoxy composite. The optimal graphite–epoxy matrix contains 37.5% graphite powder, 12.5% diphenylcarbohydrazide, a selective compound for chromium(VI), and 50% epoxy resin. The principal analytical parameters of the potentiometric response in batch and flow analysis were optimized and calculated. The screen-printed sensor exhibits a response time of 20 ± 1 s. In flow analysis, the analytical frequency of sampling is 70 injections per hour using 0.1 M NaNO₃ solution at pH 3 as the carrier, a flow rate of 2.5 mL·min⁻¹, and an injection sample volume of 0.50 mL. The sensor shows potentiometric responses that are very selective for chromium(VI) ions and optimal detection limits in both static mode (2.1 × 10⁻⁷ M) and online analysis (9.4 × 10⁻⁷ M). The disposable potentiometric sensor was employed to determine toxicity levels of chromium(VI) in mineral, tap, and river waters by flow-injection potentiometry and batch potentiometry. Chromium(VI) determination was also carried out with successful results in leachates from municipal solid waste landfills.     

Highly sensitive and selective detection of beryllium ions using a microcantilever modified with benzo-9-crown-3 doped hydrogel

A microcantilever sensor modified by chitosan/gelatin hydrogels that are doped with benzo-9-crown-3 has been developed for the sensitive and selective detection of beryllium ions in an aqueous solution. The microcantilever undergoes bending deflection upon exposure to Be(2+) due to selective absorption of Be(2+) in the hydrogel. The detection limit is 10(-11) M. Other metal ions, such as Li(+), Na(+), K(+), Mg(2+), and Ca(2+), have a marginal effect on the deflection of the microcantilever. The mechanism of the bending is discussed and the results showed that the microcantilever may be used for in situ detection of beryllium.     

Octaethylporphyrin as an ionophore for aluminum potentiometric sensor based on carbon paste electrode

A new sensor to quantitatively sense aluminum in real sample conditions is presented that uses the potentiometric ion selective electrodes. Aluminum is a cation that plays an important role in the environmental process. This approach is proposed to determine aluminum levels in real samples in the required range (10^?6–10^?2 M). Carbon paste electrode (CPE) is introduced here as a potentiometric sensor to measure free concentration of aluminum ion. Octaethylporphyrin (OEP) acts as a selective aluminum recognition agent in the CPE. The suitable selectivity coefficient is obtained for the CPEs compare to interfering cation. The Nernstian slope and detection limit are achieved 18.4 mV/decade and 2.5 × 10^?6 M Al³⁺, respectively. Finally, the proposed method is applied to determine aluminum concentration in real water samples and the result of this method is in agreement with the result of atomic absorption spectroscopy (AAS).     

Solid-contact potentiometric sensor for ascorbic acid based on cobalt phthalocyanine nanoparticles as ionophore

A novel solid-contact potentiometric sensor for ascorbic acid based on cobalt phthalocyanine nanoparticles (NanoCoPc) as ionophore was fabricated without any need of auxiliary materials (such as membrane matrix, plasticizer, and other additives). The electrode was prepared by simple drop-coating NanoCoPc colloid on the surface of a glassy carbon electrode. A smooth, bright and blue thin film was strongly attached on the surface of the glassy carbon electrode. The electrode showed high selectivity for ascorbic acid, as compared with many common anions. The influences of the amount of NanoCoPc at the electrode surface and pH on the response characteristics of the electrode were investigated. To overcome the instability of the formal potential of the coated wire electrode, a novel electrochemical pretreatment method was proposed for the potentiometric sensor based on redox mechanism. This resulting sensor demonstrates potentiometric response over a wide linear range of ascorbic acid concentration (5.5 × 10⁻⁷ to 5.5 × 10⁻² M) with a fast response (<15 s), lower detection limit (ca. 1.0 × 10⁻⁷ M), and a long-term stability. Furthermore, microsensors based on different conductors (carbon fiber and Cu wire) were also successfully fabricated for the determination of practical samples.     

A highly selective potentiometric sensor of molybdate based on a mu-oxo-bridged manganeseporphyrin dimer.

A novel high-selective potentiometric sensor for molybdate was prepared with a PVC membrane combining mu-oxo-bis[5,10,15,20-tetra(p-methylphenyl)porphinatomanganese(III)] [[Mn(p-Me)TPP](2)O] as an electroactive material and 2-nitrophenyl octyl ether (o-NPOE) as a plasticizer in the percentage ratio of 3:65:32, [Mn(p-Me)TPP](2)O:o-NPOE:PVC (w:w). The sensor exhibited a linear response with a Nernstian slope of 30.5 mV per decade within a concentration range of 2.1 x 10(-6) to 1.0 x 10(-1) M MoO4(2-), with a working pH range from 5.0 to 12.5, and a fast response time of less than 15 s. The electrode showed improved selectivity toward molybdate with respect to common coexisting anions compared to monometalloporphyrin counterparts. Several electroactive materials and solvent mediators were compared and the experimental conditions were optimized. The sensor is preliminary applied to the assay of MoO4(2-) in corrosion inhibitor samples with satisfactory results.     

Novel potentiometric membrane sensor for the determination of trace amounts of chromium(III) ions.

A plasticized Cr3+ ion sensor by incorporating 2,3,8,9-tetraphenyl-1,4,7,10-tetraazacyclododeca-1,3,7,9-tetraene (TTCT) ionophore exhibits a good potentiometric response for Cr3+ over a wide concentration range (1.0 x 10(-6)-1.0 x 10(-1) M) with a slope of 19.5 mV per decade. The sensor response is stable for at least three months. Good selectivity for Cr3+ in comparison with alkali, alkaline earth, transition and heavy metal ions, and minimal interference are caused by Li+, Na+, K+, Co2+, Hg2+, Ca2+, Pb2+ and Zn2+ ions, which are known to interfere with other chromium membrane sensors. The TTCT-based electrode shows a fast response time (15 s), and can be used in aqueous solutions of pH 3-5.5. The proposed sensor was used for the potentiometric titration of Cr3+ with EDTA and for a direct potentiometric determination of Cr3+ content in environmental samples.     

Novel potentiometric sensor for the trace-level determination of Zn2+ based on a new nanographene/ion imprinted polymer composite

In this research, a new strategy for construction of a development potentiometric carbon paste Zn²⁺-ion selective electrode based on a novel nano-sensing layer is suggested. The proposed nano-sensing layer was prepared with the addition of a synthesised Zn²⁺-ion imprinted polymer nanoparticles ‘as an efficient sensing agent’ into the carbon paste matrix consisting of graphite powder, nanographene-composite ‘graphene nanosheets decorated with silver nanoparticles’ and 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ‘ an ionic liquid ’, as the conducting binder. Under the optimised experimental conditions, the suggested nanographene-composite potentiometric sensor presented a low detection limit of 1.93 × 10^?1 μg L^?1 and a linear analytical range from 2.62 × 10^?1 to 6.54 × 10⁵ μg L^?1 with an excellent Nernstian slope of 29.80 mV decade^?1. The proposed zinc selective sensor was successfully applied for the highly sensitive determination of trace amounts of Zn²⁺ in environmental and biological samples with satisfactory results.     

Liquid membrane potentiometric sensor for determination of Fe3+ ion

Solution studies showed a selective interaction between the new synthesized ionophore, 2-[(thiophen-2-yl)methyleneamino]isoindoline-1,3-dione (TMID) and Fe(III) ion. Therefore, TMID was used as an iron selective ion-carrier in a plasticized liquid membrane sensor. The linear response range of the proposed electrode was 1.0 × 10^?6–1.0 × 10^?2 M. The Nernstian slope of 20.1 ± 0.3 mV/decade, and a detection limit of 5 × 10^?7 M was obtained. The sensor could be used in the pH range of 2.3–4.8, and the response time was about 10 s. The lifetime of the electrode was at least 7 weeks. The sensor accuracy was investigated in two ways: (i) with the potentiometric titration of a Fe³⁺ solution with EDTA and (ii) with Fe(III) monitoring in some cationic mixtures. Finally, the newly fabricated electrode was effectively applied as an indicator electrode for the direct Fe³⁺ determination in real samples.     

Novel potentiometric sensors based on polysulfone immobilized metallothioneins as metal-ionophores

We show here the use of immobilized metal-binding biomolecules for metal analysis by using novel potentiometric sensors. To this end and as a model, Ag⁺-ISEs were developed using polysulfone matrix embedding metallothioneins as ionophores (mouse MT1 (P1) or sea urchin SpMTA (P2)). Polysulfone, a porous polymer that was not used until the present in potentiometric biosensors, has the advantage of being compatible with biological materials. Also, the phase inversion procedure allows protein incorporation into the membrane with minima alterations, since it always remains in the aqueous phase. Construction of these biosensors required small amounts of protein; they can be dry-stored and have long lifetimes. They exhibited linear responses with slopes of ca. 61 mV per decade within the 10⁻⁵ to 10⁻² M Ag⁺ concentration range, detection limits of about 10⁻⁵ M, and worked in the 2-to-8 pH range. Except for Hg²⁺, the Pb²⁺, Zn²⁺, Cd²⁺, Cu²⁺ cations do not interfere with Ag⁺ determination. Significantly, different affinities of Pb²⁺ and Zn²⁺ towards P1- and P2-ISE were found, in good correlation with the higher affinity of these cations towards SpMTA than to MT1. Consequently, the distinct metal-binding features of each MT are conserved and determine the differential properties of their biosensors. These results open a broad range of possibilities for the use of proteins as ionophores in what could be considered a new type of potentiometric biosensor if their response mechanism is taken into account.     

基于分子印迹技术的牛血清白蛋白电位式传感器的研究

以牛血清白蛋白(BSA)为模板,合成了分子印迹聚合物凝胶(MIP),进而制得了以聚氯乙烯(PVC)为支撑膜的BSA电位式传感器。采用直接电位法测得BSA在浓度0.1～1.0 mg/mL范围内与电位呈线性关系。此电极制作简单,可用于BSA的测定。     

A potentiometric microbial sensor based on immobilized escherichia coli for glutamic acid

The sensor consists of immobilized E. coli (which contains glutamate decarboxylase) and a carbon dioxide gas-sensor. Continuous introduction of sample solution into a flow system incorporating the sensor gives a potential which increases until a steady state is reached after 5 min. Measurements can also be made with only a 1- or 3-min introduction period with little loss of sensitivity. Calibration plots of mV measurements vs. logarithmic glutamic acid concentration are linear in the range 100–800 mg l^-1. The sensor is highly selective, stable and reproducible. It has been applied to the determination of glutamic acid in fermentation broths.     

A polymer membrane potentiometric sensor for silver

Four new sulfur-containing compounds based on pyridine, benzene, 1,8-naphthyridine and 1,10-phenanthroline have been synthesized. These molecules have been incorporated into a polymeric matrix as neutral carriers and evaluated as silver sensors. Two of the compounds (pyridine and benzene) show high selectivity for Ag(+). The sensor with the pyridine-based compound, in particular, shows near-Nernstian response and good sensitivity towards Ag(+) with a short response time (<10s), making it ideal for use in flow analysis.