High-power continuous-wave cladding-pumped Raman fiber laser

We demonstrate a high-power single-mode cladding-pumped Raman fiber laser. The Raman fiber laser consists of a 1.2 km long germanium-doped double-clad fiber in a linear cavity, which is spliced to a single-mode fiber. The laser is end pumped by a multimode erbium-ytterbium-doped fiber, which is coupled to the inner cladding of the Raman fiber. The embedded core was designed to be single mode at the Raman Stokes wavelength, and up to 10 W of power was obtained at 1660 nm from the single-mode fiber end. The laser has a slope efficiency of 67% and a threshold of 6.5 W.     

50-watt ytterbium-doped double-clad fiber laser

A ytterbium-doped double-clad fiber laser with more than 50-W output, near diffraction-limited is demonstrated in SIOM. The optical-to-optical efficiency is about 44% with respect to incident pump power and the slope efficiency is 69% against launched pump power.     

Side-pumped fiber laser

A neodymium-doped side-pumped double-clad fiber laser operating at 1.06 µm is described. We report here, what is, to our knowledge, the first exclusively repetitive side-pumping scheme with two monomode laser diodes. Side-pumping has been realized by prism-fiber couplers. A pump-light-loss analysis at the pump positions has been performed. An output power of 13.5 mW is obtained with both diode lasers. The highest slope efficiency of 66% with respect to absorbed pump power at 809 nm is achieved when pumping with only one diode.     

Efficient high power Yb3+-silica fibre laser cladding-pumped at 1064 nm

A Yb³⁺-silica fibre laser has been cladding pumped at 1064 nm by a Nd:YAG laser and operated with a slope efficiency of 72±5% with respect to the incident pump power, a total efficiency of 41% and at powers up to 3.7 W in a small scale device. The Yb³⁺-silica double-clad fibre had a quasi-polygonal sinusoidal inner cladding geometry giving high launch efficiency to the fibre and efficient transfer of pump light from the fibre cladding to the core.     

Characterization of an Intra-Cavity Pumped P2O5-Doped Silica Raman Fiber Laser

We examine the characteristics of a P₂O₅-doped Raman fiber laser pumped by a double-clad ytterbium-doped fiber laser in an intra-cavity configuration. The double-clad fiber laser consists of two high reflection fiber Bragg gratings at 1092 nm, with an active length of 17 m, where the output grating is located at the end of the 400m P₂O₅-doped fiber. The Raman cavity is formed by a 1278-nm-high reflection fiber Bragg grating spliced to the double-clad fiber, and a 50% output coupler. The maximum conversion efficiency at 1278 nm with respect to the input pump power at 915 nm was 26.9%.     

High-power Yb-doped multicore ribbon fiber laser

A highly elongated double-clad ribbon fiber that comprises a pure-silica inner cladding with transverse dimensions of approximately 1.4 mm by 0.23 mm with a linear array of ten ytterbium-doped cores has been fabricated and operated in a simple laser configuration pumped by two diode stacks. The fiber laser yielded 320 W of output power at a center wavelength of 1045 nm in a combined beam with beam propagation factors of approximately 2 (perpendicular to the array) and approximately 150 (parallel to the array) for 576 W of launched pump power. The slope efficiency with respect to absorbed pump power was 62%. The prospects for further power scaling and improved beam quality and efficiency are discussed.     

采用国产大模场面积双包层光纤的714W连续光纤激光器

采用两个中心波长约976 nm准直输出的高功率半导体激光模块为抽运源,通过空间滤波和非球面透镜耦合技术,双端抽运长度为21 m的大模场面积国产掺镱双包层光纤,获得了714.5 W的高功率连续激光输出。采用反向抽运,当入纤抽运功率为760 W时,激光输出功率达到501 W;采用双端抽运,当入纤抽运功率为1137 W时,获得了714.5 W的高功率连续输出,光光转换效率为62.8%,斜率效率为67%。     

包层泵浦掺镱光纤激光器的理论和实验研究

从包层泵浦光纤激光器的速率方程理论出发,推导出了稳态下包层泵浦光纤激光器的输出功率,斜率效率和阈值功率的解析表达式,进行了数值模拟,对模拟结果进行了简单分析。并进行了实验研究,实验采用中心波长为975nm的激光二级管单端泵浦内包层形状为D型的包层光纤,利用二相色镜和光纤端面反馈构成谐振腔,采用了两套不同的准直耦合系统,得到的最高输出功率为24W,总的光-光转换效率为53.5%。     

Output Characteristics of High-Power Continuous Wave Raman Fiber Laser at 1484 nm Using Phosphosilicate Fiber

A continuous wave (CW) high-power Raman fiber laser (RFL) with maximum output power of 2.24 W and slope efficiency of 32.8% at 1484 nm is obtained using a CW 8.4 W/ 1064 nm Yb-doped double-clad fiber laser as a pump, 700 m phosphosilicate fiber, and cascaded cavities with two pairs of fiber Bragg grating mirrors for the first and the second Stokes orders. Theoretical simulation of the RFL using a very efficient and rapidly converging collocation method is done to understand and optimize the fiber length to obtain maximum second Stokes power. RFL performance for the 300, 700 and 1150 m phosphosilicate fiber lengths was experimentally investigated by observing maximum output power, slope efficiency, threshold power, and full-width at half maximum at the second Stokes wavelength.     

High-power diode-cladding-pumped Tm-doped silica fiber laser

The operation of a diode-pumped Tm-doped silica fiber laser that uses the cladding-pumping arrangement to produce high-power cw output at wavelengths near 2 microm is reported. We obtained a maximum output power of 5.4 W at a slope efficiency of 31% with respect to the launched pump power at a total optical-to-optical efficiency of 22%. The fiber-laser output wavelength was tuned between 1.880 and 2.033 microm by adjustment of the fiber length, with >4W of power obtainable from 1.94 to 2.01 microm. Self-pulsations detected in the output from the double-clad fiber laser may indicate the presence of ion-clustering effects.     

侧面抽运的掺Yb双包层光纤激光器

利用光纤角度磨抛侧面耦合新技术研究了侧面抽运的掺Yb双包层光纤激光器。实验上采取新的加工工艺获得了端面具有小锐角磨抛斜角的多模光纤,专门设计的高精密机械调整结构有效地将多模光纤的斜面和双包层光纤的侧面精确对准,通过不同的折射率匹配材料进行的研究,发现折射率匹配材料对于注入功率和抽运效率都有较大影响。实验中通过光纤角度侧面耦合器能够注入1．12W抽运光进入双包层光纤,侧面耦合效率最高可达80％。将该侧面耦合技术用于侧面抽运的掺Yb双包层光纤激光器,在单个尾纤输出的半导体激光器侧面抽运下得到光纤激光器的最大连续激光输出功率282mW,斜率效率为55．5％。实验结果表明,光纤角度磨抛耦合技术是掺Yb双包层光纤激光器的一种简单有效的侧面抽运方式。     

High power wavelength-defined all-fiber Yb3+-doped double clad fiber laser

An all-fiber Yb3+-doped double-clad fiber laser using FBGs as cavity mirrors is investigated in this paper. Continuous-wave (CW) output power of 1.18 W with defined wavelength at 1.06 um and narrow line-width of less than 0.1 nm is obtained. The slope efficiency and the maximum optical-to-optical efficiency of laser output are 68% and 51%, respectively, with respect to absorbed pump power.     

Diode-pumped 1018-nm ytterbium-doped double-clad fiber laser

We report a 1 018-nm ytterbium-doped double-clad fiber laser pumped by 970-nm diode. A pair of fiber Bragg gratings with reflectivities of 99.9% and 9% at a center wavelength of 1 018.9 nm are employed as cavity mirrors. The ytterbium-doped double-clad fiber is a 2.6-m-long Liekki fiber. Laser output power of 7.5 W at 1 018 nm is obtained under the pump power of 59.2 W. The overall slope efficiency of the fiber laser is about 16%. This low slope efficiency is mainly due to the incomplete absorption of the pump power.     

All-fiberized Tm-doped fiber MOPA with 30-W output power

We demonstrate a 30-W all-fiberized laser in a master oscillator power amplifier(MOPA) structure with a central wavelength of 1 950 nm.The laser is a continuous-wave(CW) operation with double-clad Tm-doped silica fiber pumped by pigtailed laser diodes with a central wavelength of 793 nm.The optical-to-optical efficiency of the MOPA system is 37.5% with respect to the total 80-W pump power.The maximal slope efficiency of the system is approximately 43%,which belongs to the main amplifier and exceeds the Stoke limit.No obvious amplified spontaneous emitting(ASE) is observed in the experiment,and the power can be scaled straightforwardly by improving the pump power.     

Experimental demonstration of novel end-pumping method for double-clad fiber devices

We present experimental demonstration of an end-pumping scheme based on splicing the multimode pump and single-mode signal fibers directly to a double-clad fiber with a tailored cross section. The method is used to pump a double-clad, erbium- and ytterbium-doped, fiber ring laser. The efficiency of the end-pumping method is tested by determining the slope efficiencies of the fiber ring laser and the fiber laser in a Fabry-Perot configuration. Comparable slope efficiencies are found when both laser configurations have similar output coupler ratios. The developed pumping scheme and double-clad fiber can find applications in cost-effective power fiber amplifiers and lasers.     

Multi-coupler side-pumped Yb-doped double-clad fiber laser

The side-coupler of angle polished method, using angle-polished multimode fiber and optical adhesive, is used to efficiently pump an Yb-doped double-clad fiber laser. The maximum coupling efficiency of 78.6% is achieved by the side-coupler for a multimode fiber with a circular core of 200 μm and a double-clad fiber with a 350/400 μm D-shaped inner cladding. While laser diodes (LDs) with three side-couplers are simultaneously used as pump sources, maximum output power of 1.38 W and slope efficiency of 48.9% are demonstrated in the fiber laser system.     

Fabrication and Lasing Property of YbYb3+-doped Double-Clad Fibers with Novel Inner Cladding

The Yb3+-doped double-clad fibers with novel inner cladding have been made by using MCVD process, solution-doping method and optical machining together. The laser power and slope efficiency of the fiber lasers are higher than 1.8W and 50% respectively.     

Optimization of linear cavity design of Yb-doped double-clad fiber laser

The output characteristics of a linear cavity Yb-doped double-clad fiber (DCF) laser, including the effects of fiber length, fiber loss, and output mirror reflectivity on laser output power and threshold pump power have been studied theoretically and experimentally. In this paper, the linear cavity of double-clad fiber laser (DCFL) was composed of a pair of fiber Bragg gratings, while the facet of fiber was anti-reflection (AR) coated at 1070nm to erase the Fresnel reflection. Analysis showed that the laser output increases as the reflectivity of the fiber Bragg grating used as the output mirror decreases. At last, under the pump power of 14.4 W, single-mode laser output at 1070 nm was up to 10.8 W, with slope efficiency of 75 %.     

强泵浦下掺Yb3+双包层光纤激光器输出特性数值分析和实验研究

对强泵浦下线形腔掺Yb3+双包层光纤激光器输出特性进行了理论和实验研究。通过数值模拟,分析了泵浦光及激光在光纤中的分布、输出功率与泵浦功率的关系、光纤长度及腔镜反射率对激光输出功率的影响。在实验中,利用D型掺Yb3+双包层光纤获得了输出功率10 6W的光纤激光输出,斜率效率达86%。测量了在不同输出耦合条件下的输出功率、阈值泵浦功率和斜率效率,理论分析与实验结果基本一致,为进一步提高光纤激光器功率提供了理论和实验依据。     

Power scaling of a continuous-wave and passively Q-switched Yb:KLu(WO<Subscript>4</Subscript>)<Subscript>2</Subscript> laser end-pumped by a high-power diode

The power scaling capacity of a diode end-pumped Yb:KLu(WO₄)₂ laser, operating in the continuous-wave (cw) and passively Q-switched regimes, has been investigated. A cw output power of 11.5 W was achieved with an optical-to-optical efficiency of 41% with respect to the incident pump power, while the slope efficiency amounts to 60%. The passively Q-switchedoperation yielded an average output power of 4.3 W at the fundamental wavelength of 1031.7 nm, and 1.15 W of Raman radiation at 1139.3 nm. The total slope efficiency for Q-switched operation was 40%. The highest pulse energy, duration, and peak power were 170 μJ, 2.2 ns, and 77.3 kW for the fundamental radiation, and 51 μJ, 2.3 ns, and 22.2 kW for the Raman radiation. PACS 42.55.Rz; 42.55.Xi; 42.55.Ye