Conformational analysis of N‐phenyl‐ and N‐trifyl‐4,4‐dimethyl‐4‐silathiane 1‐sulfimides

N‐Substituted 4,4‐dimethyl‐4‐silathiane 1‐sulfimides [R = Ph ( 1 ), CF₃ ( 2 )] were studied experimentally by variable temperature dynamic NMR spectroscopy. Low temperature ¹³C NMR spectra of the two compounds revealed the frozen ring inversion process and approximately equal content of the axial and equatorial conformers. Calculations of the 4‐silathiane derivatives 1 , 2 and the model compound [R = Me ( 3 )] as well as their carbon analogs, the similarly N‐substituted thiane 1‐sulfimides [R = Ph ( 4 ), CF₃ ( 5 ), Me ( 6 )] at the DFT/B3LYP/6–311G(d,p) level in the gas phase and in chloroform solution using the PCM model at the same level of theory showed a strong dependence of the relative stability of the conformer on the solvent. The electronegative trifluoromethyl group increases the relative stability of the axial conformer. Copyright © 2010 John Wiley & Sons, Ltd.     

Use of N‐chloro‐N‐methyl‐p‐toluenesulfonamide in N‐chlorination reactions

Second‐order rate constants (k₂) were determined for the addition of ten nitrogenous organic compounds (benzylamine, 2,2,2‐trifluoethylamine chlorhidrate, methylamine chlorhidrate, glycine ethyl ester chlorhidrate, glycine, glycylglycine chlorhidrate, morpholine, pyperidine, pyperazine and dimethylamine) to the N‐chloro‐N‐methyl‐p‐toluenesulfonamide (NCNMPT) in the formation reaction of N‐chloramines in aqueous solution at 25 °C and ionic strength 0.5 M. The series of nucleophiles considered is structurally very varied and covers five pK_a units. The kinetic behaviour is similar for all compounds, being the elementary step the transfer of chlorine from the NCNMPT molecule to the nitrogen of the free amino group. These reactions were found first order in both reagents. The values of the rate constants indicate that the more basic amines produce N‐chloramines more readily. Rate constants for the nucleophilic attack are shown to correlate with literature data for some of these nitrogenous organic compounds in their reaction with N‐methyl‐N‐nitroso‐p‐toluenesulfonamide. Both reactions involve that the rate determining step is the attack of nitrogenous compounds upon electrophilic centre (Cl or else NO group). NCNMPT is a particularly interesting substrate, for which has not hitherto been published kinetic information, that allows us to assess the efficiency and the competitiveness of this reaction and compare it with other agents with a Cl⁺ atom. Copyright © 2013 John Wiley & Sons, Ltd.     

Conformational analysis of 3‐methyl‐3‐silathiane and 3‐fluoro‐3‐methyl‐3‐silathiane

The conformational equilibria of 3‐methyl‐3‐silathiane 5 , 3‐fluoro‐3‐methyl‐3‐silathiane 6 and 1‐fluoro‐1‐methyl‐1‐silacyclohexane 7 have been studied using low temperature ¹³C NMR spectroscopy and theoretical calculations. The conformer ratio at 103 K was measured to be about 5 _ax: 5 _eq = 15:85, 6 _ax: 6 _eq = 50:50 and 7 _ax: 7 _eq = 25:75. The equatorial preference of the methyl group in 5 (0.35 kcal mol^?1) is much less than in 3‐methylthiane 9 (1.40 kcal mol^?1) but somewhat greater than in 1‐methyl‐1‐silacyclohexane 1 (0.23 kcal mol^?1). Compounds 5–7 have low barriers to ring inversion: 5.65 (ax → eq) and 6.0 (eq → ax) kcal mol^?1 ( 5 ), 4.6 ( 6 ), 5.1 (Me_ax → Me_eq) and 5.4 (Me_eq → Me_ax) kcal mol^?1 ( 7 ). Steric effects cannot explain the observed conformational preferences, like equal population of the two conformers of 6 , or different conformer ratio for 5 and 7 . Actually, by employing the NBO analysis, in particular, considering the second order perturbation energies, vicinal stereoelectronic interactions between the Si–X and adjacent C–H, C–S, and C–C bonds proved responsible. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and X‐ray structures of unexpected 2‐O‐(5‐deoxy‐1,2‐O‐isopropylidene‐α‐D‐glucofuranos‐5‐yloxy)quinoxalines

Reaction of 3‐methyl‐2(1H)‐quinoxalinone ( 4) and 2(1H)‐quinoxalinone ( 5) with 5,6‐anhydro‐1,2‐O‐isopropylidene‐ α‐D ‐glucofuranose 6 gives the unexpected O‐glucoquinoxalines derivatives by the intermediary novel intramolecular rearrangement of 5,6‐anhydro‐1,2‐O‐isopropylidene‐α‐D ‐glucofuranose to the corresponding 3,6‐anhydro form. The obtained O‐glucoquinoxalines 7,8 were identified by NMR spectroscopy. The X‐ray crystal structures have been determined at room temperature. Moreover, a solid–solid phase transition has been detected at 198.9 K for O‐glucoquinoxalines 7 and the structure of the low‐temperature phase has been solved at 188 K. Copyright © 2009 John Wiley & Sons, Ltd.     

UV‐induced transformations of matrix‐isolated 1,3,4‐thiadiazole‐2‐thiones

Monomers of 5‐mercapto‐1,3,4‐thiadiazole‐2‐thione (bismuthiol) were studied using an experimental matrix‐isolation technique as well as by carrying out theoretical quantum chemical calculations. The calculations, performed using the quadratic configuration interaction method with single and double excitations (QCISD)/6‐31++G(d,p)//DFT(B3LYP)/6‐311++G(2d,p), predict that the thione–thiol tautomer of bismuthiol should be significantly (by more than 19 kJ mol^?1) more stable than other tautomeric forms. Accordingly, only the signatures of the thione–thiol tautomer were observed in the FT‐IR spectrum of bismuthiol, recorded directly after deposition of an Ar matrix. UV (λ > 320 nm) irradiation induced the conversion of the thione–thiol tautomer into the dithiol form. Analogous investigations were carried out for two related compounds: 5‐methyl‐1,3,4‐thiadiazole‐2‐thione and 5‐methylthio‐1,3,4‐thiadiazole‐2‐thione. For these two species, only the thione tautomeric forms were observed after deposition of Ar matrices. These tautomers were predicted (by QCISD calculations) to be more stable (by at least 19 kJ mol^?1) than other tautomeric forms. Upon UV irradiation, the most stable thione forms of these compounds were transformed into the corresponding thiol tautomers. Direct observation of the thione → thiol phototautomeric processes provides a clear proof that intramolecular proton transfer reaction can occur in molecules, such as bismuthiol, in spite of the increased NH···S distance, in comparison to other phototautomerizing species studied so far. All the isomers of the studied compounds (substrates and products of the photoreactions) were identified by comparison of their IR spectra with the spectra calculated at the DFT(B3LYP)/6‐311++G(2d,p) level of theory for possible isomeric structures. Copyright © 2009 John Wiley & Sons, Ltd.     

Next‐to‐next‐to‐leading order post‐Newtonian linear‐in‐spin binary Hamiltonians

The next‐to‐next‐to‐leading order post‐Newtonian spin‐orbit and spin(1)‐spin(2) Hamiltonians for binary compact objects in general relativity are derived. The Arnowitt‐Deser‐Misner canonical formalism and its generalization to spinning compact objects in general relativity are presented and a fully reduced matter‐only Hamiltonian is obtained. Several simplifications using integrations by parts are discussed. Approximate solutions to the constraints and evolution equations of motion are provided. Technical details of the integration procedures are given including an analysis of the short‐range behavior of the integrands around the sources. The Hamiltonian of a test‐spin moving in a stationary Kerr spacetime is obtained by rather simple approach and used to check parts of the mentioned results. Kinematical consistency checks by using the global (post‐Newtonian approximate) Poincaré algebra are applied. Along the way a self‐contained overview for the computation of the 3PN ADM point‐mass Hamiltonian is provided, too.     

Next‐to‐next‐to‐leading order post‐Newtonian spin‐orbit Hamiltonian for self‐gravitating binaries

We present the next‐to‐next‐to‐leading order post‐Newtonian (PN) spin‐orbit Hamiltonian for two self‐gravitating spinning compact objects. If at least one of the objects is rapidly rotating, then the corresponding interaction is comparable in strength to a 3.5PN effect. The result in the present paper in fact completes the knowledge of the post‐Newtonian Hamiltonian for binary spinning black holes up to and including 3.5PN. The Hamiltonian is checked via known results for the test‐spin case and via the global Poincaré algebra with the center‐of‐mass vector uniquely determined by an ansatz.     

Unusual conformational preferences of 1,3‐dimethyl‐3‐isopropoxy‐3‐silapiperidine

The conformational analysis of the first representative of the Si‐alkoxy substituted six‐membered Si,N‐heterocycles, 1,3‐dimethyl‐3‐isopropoxy‐3‐silapiperidine, was performed by low‐temperature ¹H and ¹³C NMR spectroscopy and DFT theoretical calculations. In contrast to the expectations from the conformational energies of methyl and alkoxy substituents, the Me_axi‐PrO_eq conformer was found to predominate in the conformational equilibrium in the ratio Me_axi‐PrO_eq : Me_eqi‐PrO_ax of ca. 2 : 1 as from the ¹H and ¹³C NMR study. The thermodynamic parameters obtained by the complete line shape analysis showed that the main contribution to the barrier to ring inversion originates from the entropy term of the free energy of activation. Copyright © 2012 John Wiley & Sons, Ltd.     

Density functional theory calculation and vibrational spectral analysis of 4‐hydroxy‐3‐(3‐oxo‐1‐phenylbutyl)‐2H‐1‐benzopyran‐2‐one

The Fourier transform infrared (4000–400 cm⁻¹) and Fourier transform Raman (3500–500 cm⁻¹) spectra of 4‐hydroxy‐3‐(3‐oxo‐1‐phenylbutyl)‐2H‐1‐benzopyran‐2‐one (Warfarin) have been measured and calculated. The structure optimization has been made using density functional theory (DFT) calculations. Complete vibrational assignments of the observed spectra have been compared with theoretical wavenumbers. The wavenumber increasing in the methyl group shows the electronic hyperconjugation effect. The natural bond orbital (NBO) analysis reveals the hyperconjugation interaction and the intramolecular hydrogen bonding. The first‐order hyperpolarizability has been calculated. Copyright © 2009 John Wiley & Sons, Ltd.     

Conformational analysis of 4,4‐dimethyl‐1‐(trifluoromethylsulfonyl)‐1,4‐azasilinane and 2,2,6,6‐tetramethyl‐4‐(trifluoromethylsulfonyl)‐1,4,2,6‐oxazadisilinane

4,4‐Dimethyl‐1‐(trifluoromethylsulfonyl)‐1,4‐azasilinane 1 and 2,2,6,6‐tetramethyl‐4‐(trifluoromethylsulfonyl)‐1,4,2,6‐oxazadisilinane 2 were studied by variable temperature dynamic ¹H, ¹³C, ¹⁹F NMR spectroscopy and theoretical calculations at the DFT (density functional theory) and MP2 (Møller‐Plesset 2) levels of theory. Both kinetic (barriers to ring inversion) and thermodynamic data (frozen conformational equilibria) could be obtained for the two compounds. The computations revealed two minima on the potential energy surface for molecules 1 and 2 corresponding to the rotamers with the CF₃SO₂ group directed ‘inward’ and ‘outward’ the ring, the latter being 0.2–0.4 kcal/mol (for 1 ) and 1.1 kcal/mol (for 2 ) more stable than the former. The vibrational calculations at the DFT and MP2 levels of theory give the values of the free energy difference ΔG^o for the ‘inward’ ‘outward’ equilibrium consistent with those determined from the experimentally measured ratio of the rotamers. The structure of crystalline compound 2 was ascertained by X‐ray diffraction analysis. Copyright © 2011 John Wiley & Sons, Ltd.     

Nitride‐based hetero‐field‐effect‐transistor‐type photosensors with extremely high photosensitivity

AlGaN/GaN hetero‐field‐effect‐transistor‐type (HFET‐type) photosensors are fabricated with a p‐GaInN optical gate for the detection of visible light. These photosensors employ a two‐dimensional electron gas at the heterointerface between AlGaN and GaN as a highly conductive channel with a high electron mobility. By changing the InN molar fraction in the p‐GaInN optical gate, the wavelength range of the photosensitivity of the HFET‐type photosensors can be controlled. The photosensitivity of the AlGaN/GaN HFET‐type photosensors with a p‐GaInN optical gate greatly surpassed those of commercially available Si pin and Si avalanche photodiodes, and was comparable to those of photomultiplier tubes. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Polycapillary‐optics‐based micro‐XANES and micro‐EXAFS at a third‐generation bending‐magnet beamline

A focusing system based on a polycapillary half‐lens optic has been successfully tested for transmission and fluorescence µ‐X‐ray absorption spectroscopy at a third‐generation bending‐magnet beamline equipped with a non‐fixed‐exit Si(111) monochromator. The vertical positional variations of the X‐ray beam owing to the use of a non‐fixed‐exit monochromator were shown to pose only a limited problem by using the polycapillary optic. The expected height variation for an EXAFS scan around the Fe K‐edge is approximately 200 µm on the lens input side and this was reduced to ～1 µm for the focused beam. Beam sizes (FWHM) of 12–16 µm, transmission efficiencies of 25–45% and intensity gain factors, compared with the non‐focused beam, of about 2000 were obtained in the 7–14 keV energy range for an incoming beam of 0.5 × 2 mm (vertical × horizontal). As a practical application, an As K‐edge µ‐XANES study of cucumber root and hypocotyl was performed to determine the As oxidation state in the different plant parts and to identify a possible metabolic conversion by the plant.     

Design of an ultrahigh‐energy‐resolution and wide‐energy‐range soft X‐ray beamline

A new ultrahigh‐energy‐resolution and wide‐energy‐range soft X‐ray beamline has been designed and is under construction at the Shanghai Synchrotron Radiation Facility. The beamline has two branches: one dedicated to angle‐resolved photoemission spectroscopy (ARPES) and the other to photoelectron emission microscopy (PEEM). The two branches share the same plane‐grating monochromator, which is equipped with four variable‐line‐spacing gratings and covers the 20–2000 eV energy range. Two elliptically polarized undulators are employed to provide photons with variable polarization, linear in every inclination and circular. The expected energy resolution is approximately 10 meV at 1000 eV with a flux of more than 3 × 10¹⁰ photons s^?1 at the ARPES sample positions. The refocusing of both branches is based on Kirkpatrick–Baez pairs. The expected spot sizes when using a 10 µm exit slit are 15 µm × 5 µm (horizontal × vertical FWHM) at the ARPES station and 10 µm × 5 µm (horizontal × vertical FWHM) at the PEEM station. The use of plane optical elements upstream of the exit slit, a variable‐line‐spacing grating and a pre‐mirror in the monochromator that allows the influence of the thermal deformation to be eliminated are essential for achieving the ultrahigh‐energy resolution.     

Catalysis by hydrogen chloride in the gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐buten‐3‐ol

A homogeneous, molecular, gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐ buten‐3‐ol catalyzed by hydrogen chloride in the temperature range 325–386 °C and pressure range 34–149 torr are described. The rate coefficients are given by the following Arrhenius equations: for 2‐phenyl‐2‐propanol log k₁ (s^?1) = (11.01 ± 0.31) ? (109.5 ± 2.8) kJ mol^?1 (2.303 RT)^?1 and for 3‐methyl‐1‐buten‐3‐ol log k₁ (s^?1) = (11.50 ± 0.18) ? (116.5 ± 1.4) kJ mol^?1 (2.303 RT)^?1. Electron delocalization of the CH₂?CH and C₆H₅ appears to be an important effect in the rate enhancement of acid catalyzed tertiary alcohols in the gas phase. A concerted six‐member cyclic transition state type of mechanism appears to be, as described before, a rational interpretation for the dehydration process of these substrates. Copyright © 2007 John Wiley & Sons, Ltd.     

Kinetics and mechanisms of gas‐phase decarbonylation of α‐methyl‐trans‐cinamaldehyde and E‐2‐methyl‐2‐pentenal under homogeneous catalysis of hydrogen chloride

The kinetics of the gas‐phase elimination of α‐methyl‐trans‐cinamaldehyde catalyzed by HCl in the temperature range of 399.0–438.7 °C, and the pressure range of 38–165 Torr is a homogeneous, molecular, pseudo first‐order process and undergoing a parallel reaction to produce via (A) α‐methylstyrene and CO gas and via (B) β‐methylstyrene and CO gas. The decomposition of substrate E‐2‐methyl‐2‐pentenal was performed in the temperature range of 370.0–410.0 °C and the pressure range of 44–150 Torr also undergoing a molecular, pseudo first‐order reaction gives E‐2‐pentene and CO gas. These reactions were carried out in a static system seasoned reactions vessels and in the presence of toluene free radical inhibitor. The rate coefficients are given by the following Arrhenius expressions:

• Products formation from α‐methyl‐trans‐cinamaldehyde
• α‐methylstyrene :
• β‐methylstyrene :
• Products formation from E‐2‐methyl‐2‐pentenal
• E‐2‐pentene :

The kinetic and thermodynamic parameters for the thermal decomposition of α‐methyl‐trans‐cinamaldehyde suggest that via (A) proceeds through a bicyclic transition state type of mechanism to yield α‐methylstyrene and carbon monoxide, whereas via (B) through a five‐membered cyclic transition state to give β‐methylstyrene and carbon monoxide. However, the elimination of E‐2‐methyl‐2‐pentenal occurs by way of a concerted cyclic five‐membered transition state mechanism producing E‐2‐pentene and carbon monoxide. The present results support that uncatalyzed α‐β‐unsaturated aldehydes decarbonylate through a three‐membered cyclic transition state type of mechanism. Copyright © 2014 John Wiley & Sons, Ltd.     

Electrochemical reduction of 2,4‐dimethyl(diethyl)‐9‐oxo‐10‐(4‐heptoxyphenyl)‐9H‐thioxanthenium hexafluorophosphates and 2,4‐dimethyl(diethyl)‐9H‐thioxanthene‐9‐ones

Electrochemical reduction of 2,4‐dimethyl(diethyl)‐9‐oxo‐10‐(4‐heptoxyphenyl)‐9H‐thioxanthenium hexafluorophosphates in acetonitrile (MeCN) and N,N‐dimethylformamide is an irreversible 1‐electron process accompanied by the cleavage of the C(Ph)‐S bond in thioxanthenium cations with the formation of the corresponding 2,4‐dimethyl(diethyl)‐9H‐thioxanthene‐9‐ones. One‐electron reversible electrochemical reduction of the latter compounds occurs at more negative potentials and yields the corresponding radical anions, which have been characterized by electron paramagnetic resonance spectroscopy and density functional theory calculations at the (U)B3LYP/6‐31+G*/polarizable continuum model level of theory.     

Conformational analysis of 3,3‐dimethyl‐3‐silathiane, 2,3,3‐trimethyl‐3‐silathiane and 2‐trimethylsilyl‐3,3‐dimethyl‐3‐silathiane—preferred conformers,barriers to ring inversion and substituent effects

The first conformational analysis of 3‐silathiane and its C‐substituted derivatives, namely, 3,3‐dimethyl‐3‐silathiane 1 , 2,3,3‐trimethyl‐3‐silathiane 2 , and 2‐trimethylsilyl‐3,3‐dimethyl‐3‐silathiane 3 was performed by using dynamic NMR spectroscopy and B3LYP/6‐311G(d,p) quantum chemical calculations. From coalescence temperatures, ring inversion barriers ΔG^≠ for 1 and 2 were estimated to be 6.3 and 6.8 kcal/mol, respectively. These values are considerably lower than that of thiacyclohexane (9.4 kcal/mol) but slightly higher than the one of 1,1‐dimethylsilacyclohexane (5.5 kcal/mol). The conformational free energy for the methyl group in 2 (?ΔG° = 0.35 kcal/mol) derived from low‐temperature ¹³C NMR data is fairly consistent with the calculated value. For compound 2 , theoretical calculations give ΔE value close to zero for the equilibrium between the 2 ‐Me_ax and 2 ‐Me_eq conformers. The calculated equatorial preference of the trimethylsilyl group in 3 is much more pronounced (?ΔG° = 1.8 kcal/mol) and the predominance of the 3 ‐SiMe_{3 eq} conformer at room temperature was confirmed by the simulated ¹H NMR and 2D NOESY spectra. The effect of the 2‐substituent on the structural parameters of 2 and 3 is discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

Review of state‐of‐the‐art and output characteristics of table‐top soft x‐ray lasers

X‐ray lasers (XRLs) belong to the brightest existing short‐wavelength sources. The development trends are discussed from the point of view their suitability for applications. A detailed analysis of the output parameters of the XRL with transient inversion proves that this type of laser has become sufficiently mature to be applied in practice. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis of Blue‐, Green‐, Yellow‐, and Red‐Emitting Graphene‐Quantum‐Dot‐Based Nanomaterials with Excitation‐Independent Emission

A one‐pot method is described for the preparation of graphene quantum dots/graphene oxide (GQDs/GO) hybrid composites with emission in the visible region, through heteroatom doping and hydroxyl‐radical‐induced decomposition of GO. The NH₄OH‐ and thiourea‐mediated dissociation of H₂O₂ produces hydroxyl radicals. Treatment of GO with hydroxyl radicals results in the production of small‐sized GO sheets and GQDs, which self‐assemble to form GQDs/GO through strong π–π interactions. For example, the reaction of GO with a mixture of NH₄OH and H₂O₂ for 40, 120, and 270 min generates yellow‐emitting GQDs/GO (Y‐GQDs/GO), green‐emitting GQDs/GO, and blue‐emitting GQDs, while red‐emitting GQDs/GO (R‐GQDs/GO) are prepared by incubating GO with a mixture of thiourea and H₂O₂. From the analysis of these four GQD‐based nanomaterials by transmission electron microscopy, atomic force microscopy, and fluorescence lifetime spectroscopy, it is found that this tunable fluorescence wavelength results from the differences in particle size. All four GQD‐based nanomaterials exhibit moderate quantum yields (1–10%), nanosecond fluorescence lifetimes, and excitation‐independent emissions. Except for R‐GQDs/GO, the other three GQD‐based nanomaterials are stable in a high‐concentration salt solution (e.g., 1.6 m NaCl) and under high‐power irradiation, enabling the sensitive (high‐temperature resolution and large activation energy) and reversible detection of temperature change. It is further demonstrated that Y‐GQD/GO can be used to image HeLa cells.