Intercalation of Coordinatively Unsaturated FeIII Ion within Interpenetrated Metal–Organic Framework MOF‐5

Coordinatively unsaturated Fe^III metal sites were successfully incorporated into the iconic MOF‐5 framework. This new structure, Fe^III‐iMOF‐5, is the first example of an interpenetrated MOF linked through intercalated metal ions. Structural characterization was performed with single‐crystal and powder XRD, followed by extensive analysis by spectroscopic methods and solid‐state NMR, which reveals the paramagnetic ion through its interaction with the framework. EPR and Mössbauer spectroscopy confirmed that the intercalated ions were indeed Fe^III, whereas DFT calculations were employed to ascertain the unique pentacoordinate architecture around the Fe^III ion. Interestingly, this is also the first crystallographic evidence of pentacoordinate Zn^II within the MOF‐5 SBU. This new MOF structure displays the potential for metal‐site addition as a framework connector, thus creating further opportunity for the innovative development of new MOF materials.     

A three‐dimensional twofold interpenetrated cobalt(II) MOF containing a flexible carboxylate‐based ligand: synthesis,structure and magnetic properties

The design and synthesis of coordination polymers (CPs) have attracted much interest due to the intriguing diversity of their architectures and topologies. The functional solid catena‐poly[μ₂‐aqua‐triaqua{μ₄‐5‐[4‐carboxyphenoxy)methyl]benzene‐1,3‐dicarboxylato}{μ₃‐5‐[4‐carboxyphenoxy)methyl]benzene‐1,3‐dicarboxylato}dicobalt(II)], [Co₂(C₁₆H₁₀O₇)₂(H₂O)₄]_n or [Co₂(HL)₂(μ₂‐H₂O)(H₂O)₃]_n, was synthesized successfully by self‐assembly of Co^II ions with 5‐[(4‐carboxyphenoxy)methyl]isophthalic acid (H₃L). The title compound was obtained under hydrothermal conditions and exhibits a twofold interpenetrated three‐dimensional skeleton with hms 3,5‐conn topology according to the cluster representation for valence‐bonded metal–organic frameworks (MOFs). It has been characterized by single‐crystal X‐ray diffraction, IR spectroscopy, powder X‐ray diffraction (PXRD), thermogravimetric analysis and susceptibility measurements. The antiferromagnetic coupling between adjacent Co^II centres occurs via superexchange through the ligands.     

Characterization and gas adsorption of a novel three‐dimensional metal–organic framework (MOF) generated from a new polydentate fluorene‐bridged ligand

A polydentate ligand bridged by a fluorene group, namely 9,9‐bis(2‐hydroxyethyl)‐2,7‐bis(pyridin‐4‐yl)fluorene (L), has been prepared under solvothermal conditions in acetonitrile. Crystals of the three‐dimensional metal–organic framework (MOF) poly[[[μ₃‐9,9‐bis(2‐hydroxyethyl)‐2,7‐bis(pyridin‐4‐yl)fluorene‐κ³N:N′:O]bis(methanol‐κO)(μ‐sulfato‐κ²O:O′)nickel(II)] methanol disolvate], {[Ni(SO₄)(C₂₇H₂₄N₂O₂)(CH₃OH)]·2CH₃OH}_n, (I), were obtained by the solvothermal reaction of L and NiSO₄ in methanol. The ligand L forms a two‐dimensional network in the crystallographic bc plane via two groups of O—H…N hydrogen bonds and neighbouring two‐dimensional planes are completely parallel and stack to form a three‐dimensional structure. In (I), the Ni^II ions are linked by sulfate ions through Ni—O bonds to form inorganic chains and these Ni‐containing chains are linked into a three‐dimensional framework via Ni—O and Ni—N bonds involving the polydentate ligand L. With one of the hydroxy groups of L coordinating to the Ni^II atom, the torsion angle of the hydroxyethyl group changes from that of the uncoordinated molecule. In addition, the adsorption properties of (I) with carbon dioxide were investigated.     

Synthesis,structure and properties of a new three‐dimensional interpenetrated metal–organic framework with 3,3′‐azodibenzoic acid (H2azdc) and 1,4‐bis(1H‐imidazol‐1‐yl)butane (bimb): {[Cd(azdc)(bimb)2]·H2O}n

A new three‐dimensional interpenetrated Cd^II–organic framework based on 3,3′‐azodibenzoic acid [3,3′‐(diazenediyl)dibenzoic acid, H₂azdc] and the auxiliary flexible ligand 1,4‐bis(1H‐imidazol‐1‐yl)butane (bimb), namely poly[[bis[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)butane‐κ²N³:N^3′][μ₂‐3,3′‐(diazenediyl)dibenzoato‐κ²O:O′]cadmium(II)] monohydrate], {[Cd(C₁₄H₈N₂O₄)(C₁₀H₁₄N₂)₂]·H₂O}_n, (1), was obtained by a typical solution reaction in mixed solvents (water and N,N′‐dimethylformamide). Each Cd^II centre is six‐coordinated by two O atoms of bis‐monodentate bridging carboxylate groups from two azdc²⁻ ligands and by four N atoms from four bimb ligands, forming an octahedral coordination environment. The Cd^II ions are connected by the bimb ligands, resulting in two‐dimensional (4,4) layers, which are further pillared by the azdc²⁻ ligands, affording a threefold interpenetrated three‐dimensional α‐Po topological framework with the Schläfli symbol 4¹²6³. The thermal stability and solid‐state fluorescence properties of (1) have been investigated.     

Two new isomeric zinc(II) metal–organic frameworks based on 1,5‐bis(2‐methyl‐1H‐imidazol‐1‐yl)pentane and 5‐methylisophthalate ligands

Many factors, such as temperature, solvent, the central metal atom and the type of coligands, may affect the nature of metal–organic frameworks (MOFs) and the framework formation in the self‐assembly process, which results in the complexity of these compounds and the uncertainty of their structures. Two new isomeric Zn^II metal–organic frameworks (MOFs) based on mixed ligands, namely, poly[[μ‐1,5‐bis(2‐methyl‐1H‐imidazol‐1‐yl)pentane‐κ²N ³:N ^3′](μ‐5‐methylisophthalato‐κ²O ¹:O ³)zinc(II)], [Zn(C₉H₆O₄)(C₁₃H₂₀N₄)]_n , (I), and poly[[μ‐1,5‐bis(2‐methyl‐1H‐imidazol‐1‐yl)pentane‐κ²N ³:N ^3′](μ₃‐5‐methylisophthalato‐κ³O ¹:O ^1′:O ³)(μ₃‐5‐methylisophthalato‐κ⁴O ¹:O ^1′:O ³,O ^3′)dizinc(II)], [Zn₂(C₉H₆O₄)₂(C₁₃H₂₀N₄)]_n , (II), have been synthesized under hydrothermal conditions and characterized by single‐crystal X‐ray diffraction, IR spectroscopy, elemental analysis and thermogravimetric analysis. Complex (I) displays a two‐dimensional layer net, while complex (II) exhibits a twofold interpenetrating three‐dimensional framework. Both complexes show high stability and good fluorescence in the solid state at room temperature.     

3D semiconducting Co–MOFs based on 5‐(hydroxymethyl)isophthalic acid and imidazole derivatives: syntheses and crystal structures

Two three‐dimensional cobalt‐based metal–organic frameworks with 5‐(hydroxymethyl)isophthalic acid (H₂HIPA), namely poly[[μ₂‐1,4‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene‐κ²N³:N^3′][μ₂‐5‐(hydroxymethyl)isophthalato‐κ²O¹:O³]cobalt(II)], [Co(C₉H₆O₅)(C₁₄H₁₄N₄)]_n ( 1 ), and poly[tris[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)benzene‐κ²N³:N^3′]bis[μ₃‐5‐(hydroxymethyl)isophthalato‐κ²O¹:O³:O⁵]dicobalt(II)], [Co₂(C₉H₆O₅)₂(C₁₂H₁₀N₄)₃]_n ( 2 ), were synthesized under similar hydrothermal conditions. Single‐crystal X‐ray diffraction analyses revealed that 5‐(hydroxymethyl)isophthalate (HIPA^2?) and 1,4‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene (1,4‐BMIB) are simple linkers connecting cobalt centres to build a fourfold interpenetration dia framework in complex 1 . However, complex 2 is a pillared‐layer framework with a (3,6)‐connected network constructed by 1,4‐bis(1H‐imidazol‐1‐yl)benzene (1,4‐DIB) linkers, 3‐connected HIPA^2? ligands and 6‐connected Co^II centres. The above significant structural differences can be ascribed to the introduction of the different auxiliary N‐donor ligands. Moreover, UV–Vis spectroscopy and Mott–Schottky measurements confirmed that complexes 1 and 2 are typical n‐type semiconductors.     

A hydrostable and twofold interpenetrating three‐dimensional zinc–organic framework with rob topology based on 4,4′‐oxydibenzoate and 3,3′‐dimethyl‐4,4′‐bipyridine ligands

Metal–organic frameworks (MOFs) are a new class of porous materials that have received widespread attention due to their potential applications in gas storage and/or separation, catalysis, luminescence, and so on. The title compound, poly[[(μ₂‐3,3′‐dimethyl‐4,4′‐bipyridine‐κ²N:N′)bis(μ₄‐4,4′‐oxydibenzoato‐κ⁴O:O′:O′′:O′′′)dizinc] tetrahydrate], {[Zn₂(C₁₄H₈O₅)₂(C₁₂H₁₂N₂)]·4H₂O}_n, has been prepared by the solvothermal assembly of Zn(NO₃)₂·6H₂O, 4,4′‐oxydi(benzoic acid) and 3,3′‐dimethyl‐4,4′‐bipyridine. The two Zn^II atoms adopt the same five‐coordinated distorted square‐pyramidal geometry (i.e. ZnO₄N), bonding to four O atoms from four different 4,4′‐oxydibenzoate (oba) ligands and one N atom from a 3,3′‐dimethyl‐4,4′‐bipyridine (dmbpy) ligand. The supramolecular secondary building unit (SBU) is a paddle‐wheel [Zn₂(COO)₄] unit and these units are linked by oba ligands within the layer to form a two‐dimensional net parallel to the b axis, with the dmbpy ligands pointing alternately up and down, which is further extended by dmbpy ligands to form a three‐dimensional framework with rob topology. The single net leaves voids that are filled by mutual interpenetration of an independent equivalent framework in a twofold interpenetrating architecture. The title compound shows thermal stability up to 673 K and is stable in aqueous solutions in the pH range 5–9. Excitation and luminescence data observed at room temperature show that it emits a bright‐blue fluorescence.     

Post‐Synthetic Reversible Incorporation of Organic Linkers into Porous Metal–Organic Frameworks through Single‐Crystal‐to‐Single‐Crystal Transformations and Modification of Gas‐Sorption Properties

The porous metal–organic framework (MOF) {[Zn₂(TCPBDA)(H₂O)₂]?30 DMF?6 H₂O}_n ( SNU‐30 ; DMF=N,N‐dimethylformamide) has been prepared by the solvothermal reaction of N,N,N′,N′‐tetrakis(4‐carboxyphenyl)biphenyl‐4,4′‐diamine (H₄TCPBDA) and Zn(NO₃)₂?6 H₂O in DMF/tBuOH. The post‐synthetic modification of SNU‐30 by the insertion of 3,6‐di(4‐pyridyl)‐1,2,4,5‐tetrazine (bpta) affords single‐crystalline {[Zn₂(TCPBDA)(bpta)]?23 DMF?4 H₂O}_n ( SNU‐31 SC ), in which channels are divided by the bpta linkers. Interestingly, unlike its pristine form, the bridging bpta ligand in the MOF is bent due to steric constraints. SNU‐31 can be also prepared through a one‐pot solvothermal synthesis from Zn^II, TCPBDA^4?, and bpta. The bpta linker can be liberated from this MOF by immersion in N,N‐diethylformamide (DEF) to afford the single‐crystalline SNU‐30 SC , which is structurally similar to SNU‐30 . This phenomenon of reversible insertion and removal of the bridging ligand while preserving the single crystallinity is unprecedented in MOFs. Desolvated solid SNU‐30′ adsorbs N₂, O₂, H₂, CO₂, and CH₄ gases, whereas desolvated SNU‐31′ exhibits selective adsorption of CO₂ over N₂, O₂, H₂, and CH₄, thus demonstrating that the gas adsorption properties of MOF can be modified by post‐synthetic insertion/removal of a bridging ligand.     

A new luminescent anionic metal–organic framework based on heterometallic zinc(II)–barium(II) for selective detection of Fe3+ and Cu2+ ions in aqueous solution

Over the past two decades, the development of novel inorganic–organic hybrid porous crystalline materials or metal–organic frameworks (MOFs) using crystal engineering has provoked significant interest due to their potential applications as functional materials. In this context, luminescent MOFs as fluorescence sensors have recently received significant attention for the sensing of ionic species and small molecules. In this work, a new luminescent heterometallic zinc(II)–barium(II)‐based anionic metal–organic framework, namely poly[imidazolium [triaqua(μ₆‐benzene‐1,3,5‐tricarboxylato)bariumtrizinc] tetrahydrate], {(C₃H₄N₂)[BaZn₃(C₉H₃O₆)₃(H₂O)₃]·4H₂O}_n ( 1 ), was synthesized under hydrothermal conditions and characterized. Compound 1 presents a three‐dimensional framework with an unprecedented (3,5)‐connected topology of the point symbol (3.9²).(3³.4².5.9³.10), and exhibits `turn‐off' luminescence responses for the Cu²⁺ and Fe³⁺ ions in aqueous solution based on significantly different quenching mechanisms.     

Synthesis,structure and characterization of two new metal–organic coordination polymers based on the ligand 5‐iodobenzene‐1,3‐dicarboxylate

Two new coordination polymers (CPs) formed from 5‐iodobenzene‐1,3‐dicarboxylic acid (H₂iip) in the presence of the flexible 1,4‐bis(1H‐imidazol‐1‐yl)butane (bimb) auxiliary ligand, namely poly[[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)butane‐κ²N³:N^3′](μ₃‐5‐iodobenzene‐1,3‐dicarboxylato‐κ⁴O¹,O^1′:O³:O^3′)cobalt(II)], [Co(C₈H₃IO₄)(C₁₀H₁₄N₄)]_n or [Co(iip)(bimb)]_n, (1), and poly[[[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)butane‐κ²N³:N^3′](μ₂‐5‐iodobenzene‐1,3‐dicarboxylato‐κ²O¹:O³)zinc(II)] trihydrate], {[Zn(C₈H₃IO₄)(C₁₀H₁₄N₄)]·3H₂O}_n or {[Zn(iip)(bimb)]·3H₂O}_n, (2), were synthesized and characterized by FT–IR spectroscopy, thermogravimetric analysis (TGA), solid‐state UV–Vis spectroscopy, single‐crystal X‐ray diffraction analysis and powder X‐ray diffraction analysis (PXRD). The iip²⁻ ligand in (1) adopts the (κ¹,κ¹‐μ₂)(κ¹, κ¹‐μ₁)‐μ₃ coordination mode, linking adjacent secondary building units into a ladder‐like chain. These chains are further connected by the flexible bimb ligand in a trans–trans–trans conformation. As a result, a twofold three‐dimensional interpenetrating α‐Po network is formed. Complex (2) exhibits a two‐dimensional (4,4) topological network architecture in which the iip²⁻ ligand shows the (κ¹)(κ¹)‐μ₂ coordination mode. The solid‐state UV–Vis spectra of (1) and (2) were investigated, together with the fluorescence properties of (2) in the solid state.     

Crystal Growth Mechanisms and Morphological Control of the Prototypical Metal–Organic Framework MOF‐5 Revealed by Atomic Force Microscopy

Crystal growth of the metal–organic framework MOF‐5 was studied by atomic force microscopy (AFM) for the first time. Growth under low supersaturation conditions was found to occur by a two‐dimensional or spiral crystal growth mechanism. Observation of developing nuclei during the former reveals growth occurs through a process of nucleation and spreading of metastable and stable sub‐layers revealing that MOFs may be considered as dense phase structures in terms of crystal growth, even though they contain sub‐layers consisting of ordered framework and disordered non‐framework components. These results also support the notion this may be a general mechanism of surface crystal growth at low supersaturation applicable to crystalline nanoporous materials. The crystal growth mechanism at the atomistic level was also seen to vary as a function of the growth solution Zn/H₂bdc ratio producing square terraces with steps parallel to the <100> direction or rhombus‐shaped terraces with steps parallel to the <110> direction when the Zn/H₂bdc ratio was >1 or about 1, respectively. The change in relative growth rates can be explained in terms of changes in the solution species concentrations and their influence on growth at different terrace growth sites. These results were successfully applied to the growth of as‐synthesized cube‐shaped crystals to increase expression of the {111} faces and to grow octahedral crystals of suitable quality to image using AFM. This modulator‐free route to control the crystal morphology of MOF‐5 crystals should be applicable to a wide variety of MOFs to achieve the desired morphological control for performance enhancement in applications.     

Two Heterometallic–Organic Frameworks Composed of Iron(III)‐Salen‐Based Ligands and d10 Metals: Gas Sorption and Visible‐Light Photocatalytic Degradation of 2‐Chlorophenol

Two examples of heterometallic–organic frameworks (HMOFs) composed of dicarboxyl‐functionalized Fe^III‐salen complexes and d¹⁰ metals (Zn, Cd), [Zn₂(Fe‐L)₂(μ₂‐O)(H₂O)₂] ? 4 DMF ? 4 H₂O ( 1 ) and [Cd₂(Fe‐L)₂(μ₂‐O)(H₂O)₂] ? 2 DMF ? H₂O ( 2 ) (H₄L=1,2‐cyclohexanediamino‐N,N′‐bis(3‐methyl‐5‐carboxysalicylidene), have been synthesized and structurally characterized. In 1 and 2 , each square‐pyramidal Fe^III atom is embedded in the [N₂O₂] pocket of an L^4? anion, and these units are further bridged by a μ₂‐O anion to give an (Fe‐L)₂(μ₂‐O) dimer. The two carboxylate groups of each L^4? anion bridge Zn^II or Cd^II atoms to afford a 3D porous HMOF. The gas sorption and magnetic properties of 1 and 2 have been studied. Remarkably, 1 and 2 show activity for the photocatalytic degradation of 2‐chlorophenol (2‐CP) under visible‐light irradiation, which, to the best of our knowledge, is the first time that this has been observed for Fe^III‐salen‐based HMOFs.     

Synthesis,crystal structure and photoluminescence of a three‐dimensional zinc coordination compound with NBO‐type topology

The assembly of metal–organic frameworks (MOFs) with metal ions and organic ligands is currently attracting considerable attention in crystal engineering and materials science due to their intriguing architectures and potential applications. A new three‐dimensional MOF, namely poly[[diaqua(μ₈‐para‐terphenyl‐3,3′,5,5′‐tetracarboxylato)dizinc(II)] dimethylformamide disolvate monohydrate], {[Zn₂(C₂₂H₁₀O₈)(H₂O)₂]·2C₃H₇NO·H₂O}_n, was synthesized by the self‐assembly of Zn(NO₃)₂·6H₂O and para‐terphenyl‐3,3′,5,5′‐tetracarboxylic acid (H₄TPTC) under solvothermal conditions. The compound was structurally characterized by FT–IR spectroscopy, elemental analysis and single‐crystal X‐ray diffraction analysis. Each Zn^II ion is located in a square‐pyramidal geometry and is coordinated by four carboxylate O atoms from four different TPTC^4? ligands. Pairs of adjacent equivalent Zn^II ions are bridged by four carboxylate groups, forming [Zn₂(O₂CR)₄] (R = terphenyl) paddle‐wheel units. One aqua ligand binds to each Zn^II centre along the paddle‐wheel axis. Each [Zn₂(O₂CR)₄] paddle wheel is further linked to four terphenyl connectors to give a three‐dimensional framework with NBO‐type topology. The thermal stability and solid‐state photoluminescence properties of the title compound have also been investigated.     

Band gap,sorption properties and fluorescence sensing behaviour of a novel 1D→2D cathenane‐like cobalt(II)–organic framework

A novel hydrolytic stable Co^II–organic framework, namely poly[[bis(2‐amino‐4‐sulfonatobenzoato‐κO¹)tetraaquatris{μ‐1,4‐bis[(imidazol‐1‐yl)methyl]benzene‐κ²N³:N^3′}dicobalt(II)] tetrahydrate], {[Co(C₇H₅NO₅S)(C₁₄H₁₄N₄)_1.5(H₂O)₂]·2H₂O}_n, ( 1 ), based on multifunctional 2‐amino‐5‐sulfobenzoic acid (H₂asba) and the auxiliary flexible ligand 1,4‐bis[(imidazol‐1‐yl)methyl]benzene (bix), was prepared using the solution evaporation method. The purity of ( 1 ) was confirmed by elemental analysis and powder X‐ray diffraction (PXRD) analysis. Complex ( 1 ) shows a novel 1D→2D interpenetrating network, which is further extended into a 3D supramolecular framework with channels occupied by the lattice water molecules. The 2‐amino‐4‐sulfonatobenzoate (asba^2?) ligand adopts a monodentate coordination mode. The bix ligands exhibit gauche–gauche (GG) and trans–trans (TT) conformations. A detailed analysis of the solid‐state diffuse‐reflectance UV–Vis spectrum reveals that an indirect band gap exists in the complex. The band structure, the total density of states (TDOS) and the partial density of states (PDOS) were calculated using the CASTEP program. The calculated band gap (E_g) matches well with the experimental one. The complex exhibits a reversible dehydration–rehydration behaviour. Interestingly, gas sorption experiments demonstrate that the new fully anhydrous compound obtained by activating complex ( 1 ) at 400 K shows selective adsorption of CO₂ over N₂. Complex ( 1 ) retains excellent framework stability in a variety of solvents and manifests distinct solvent‐dependent fluorescence properties. Moreover, the complex shows multiresponsive fluorescence sensing for some nitroaromatics in aqueous medium.     

A fourfold interpenetrating cadmium(II) metal–organic framework based on 2,4,6‐tris(pyridin‐4‐yl)‐1,3,5‐triazine with reversible photochromic properties

2,4,6‐Tris(pyridin‐4‐yl)‐1,3,5‐triazine (tpt), as an organic molecule with an electron‐deficient nature, has attracted considerable interest because of its photoinduced electron transfer from neutral organic molecules to form stable anionic radicals. This makes it an excellent candidate as an organic linker in the construction of photochromic complexes. Such a photochromic three‐dimensional (3D) metal–organic framework (MOF) has been prepared using this ligand. Crystallization of tpt with Cd(NO₃)₂·4H₂O in an N,N‐dimethylacetamide–methanol mixed‐solvent system under solvothermal conditions afforded the 3D MOF poly[[bis(nitrato‐κ²O,O′)cadmium(II)]‐μ₃‐2,4,6‐tris(pyridin‐4‐yl)‐1,3,5‐triazine‐κ³N²:N⁴:N⁶], [Cd(NO₃)₂(C₁₈H₁₂N₆)]_n, which was characterized by IR spectroscopy, elemental analysis, thermogravimetric analysis and single‐crystal X‐ray diffraction. The X‐ray diffraction crystal structure analysis reveals that the asymmetric unit contains one independent Cd^II cation, one tpt ligand and two coordinated NO₃^? anions. The Cd^II cations are connected by tpt ligands to generate a 3D framework. The single framework leaves voids that are filled by mutual interpenetration of three independent equivalent frameworks in a fourfold interpenetrating architecture. The compound shows a good thermal stability and exhibits a reversible photochromic behaviour, which may originate from the photoinduced electron‐transfer generation of radicals in the tpt ligand.     

Yolk–shell microspheres assembled from Preyssler‐type NaP5W30O11014− polyoxometalate and MIL‐101(Cr) metal–organic framework: A new inorganic–organic nanohybrid for fast and selective removal of cationic organic dyes from aqueous media

Novel inorganic–organic yolk–shell microspheres based on Preyssler‐type NaP₅W₃₀O₁₁₀^14? polyoxometalate and MIL‐101(Cr) metal–organic framework (P₅W₃₀/MIL‐101(Cr)) were synthesized by reaction of K_12.5Na_1.5[NaP₅W₃₀O₁₁₀], Cr(NO₃)₃·9H₂O and terephthalic acid under hydrothermal conditions at 200°C for 24 h. The as‐prepared yolk–shell microspheres were fully characterized using various techniques. All analyses confirmed the incorporation of the Preyssler‐type NaP₅W₃₀O₁₁₀^14? polyoxometalate into the three‐dimensional porous MIL‐101(Cr) metal–organic framework. The results revealed that P₅W₃₀/MIL‐101(Cr) demonstrated rapid adsorption of cationic methylene blue (MB) and rhodamine B (RhB) with ultrahigh efficiency and capacity, as well as achieving rapid and highly selective adsorption of MB from MB/MO (MO = methyl orange), MB/RhB and MB/RhB/MO mixtures. The P₅W₃₀/MIL‐101(Cr) adsorbent not only exhibited a high adsorption capacity of 212 mg g^?1, but also could quickly remove 100% of MB from a dye solution of 50 mg l^?1 within 8 min. The effects of some key parameters such as adsorbent dosage, initial dye concentration and initial pH on dye adsorption were investigated in detail. The equilibrium adsorption data were better fitted by the Langmuir isotherm. The adsorption kinetics was well modelled using a pseudo‐second‐order model. Also, the inorganic–organic hybrid yolk–shell microspheres could be easily separated from the reaction system and reused up to four times without any change in structure or adsorption ability. The stability and robustness of the adsorbent were confirmed using various techniques.     

Tandem magnetization and post‐synthetic metal ion exchange of metal–organic framework: Synthesis,characterization and catalytic study

For the first time, metal‐exchange in a magnetic metal–organic framework (MOF) via tandem magnetization and post‐synthetic modification has been developed. The new magnetic mixed‐metal metal–organic framework nanocomposite, CoFe₂O₄/[Cu_0.63/Zn_0.37‐TMU‐17‐NH₂] (CoFe₂O₄/[Cu/Zn‐MOF]) has been synthesized by immersing the CoFe₂O₄/Zn‐TMU‐17‐NH₂ (CoFe₂O₄/Zn‐MOF) as a template in DMF solution of Cu (II) salts. CoFe₂O₄/[Cu/Zn‐MOF] showed to be a highly reactive and easily recoverable magnetic catalyst for the preparation of tetrazole derivatives via one‐pot three‐component reactions of different aldehydes with hydroxyl amine hydrochloride and sodium azide. Our results (Fourier transform‐infrared, inductively coupled plasma‐optical emission spectroscopy, powder X‐ray diffraction, field emission‐scanning electron microscopy, energy‐dispersive X‐ray spectroscopy‐mapping and vibrating‐sample magnetometer) show successful partial metal‐exchange in which the framework integrity remained intact during the metal‐exchange process.     

MOF‐5‐Polystyrene: Direct Production from Monomer,Improved Hydrolytic Stability,and Unique Guest Adsorption

An unprecedented mode of reactivity of Zn₄O‐based metal–organic frameworks (MOFs) offers a straightforward and powerful approach to polymer‐hybridized porous solids. The concept is illustrated with the production of MOF‐5‐polystyrene wherein polystyrene is grafted and uniformly distributed throughout MOF‐5 crystals after heating in pure styrene for 4–24 h. The surface area and polystyrene content of the material can be fine‐tuned by controlling the duration of heating styrene in the presence of MOF‐5. Polystyrene grafting significantly alters the physical and chemical properties of pristine MOF‐5, which is evident from the unique guest adsorption properties (solvatochromic dye uptake and improved CO₂ capacity) as well as the dramatically improved hydrolytic stability of composite. Based on the fact that MOF‐5 is the best studied member of the structure class, and has been produced at scale by industry, these findings can be directly leveraged for a range of current applications.     

Facile Synthesis of Hydroxy‐Modified MOF‐5 for Improving the Adsorption Capacity of Hydrogen by Lithium Doping

A facile synthesis of partially hydroxy‐modified MOF‐5 and its improved H₂‐adsorption capacity by lithium doping are reported. The reaction of Zn(NO₃)₂ ? 6 H₂O with a mixture of terephthalic acid (H₂BDC) and 2‐hydroxyterephthalic acid (H₂BDC‐OH) in DMF gave hydroxy‐modified MOF‐5 (MOF‐5‐OH‐x), in which the molar fraction (x) of BDC‐OH^2? was up to 0.54 of the whole ligand. The MOF‐5‐OH‐x frameworks had high BET surface areas (about 3300 m² g^?1), which were comparable to that of MOF‐5. We suggest that the MOF‐5‐OH‐x frameworks are formed by the secondary growth of BDC^2?‐rich MOF‐5 seed crystals, which are nucleated during the early stage of the reaction. Subsequent Li doping into MOF‐5‐OH‐x results in increased H₂ uptake at 77 K and 0.1 MPa from 1.23 to 1.39 wt. % and an increased isosteric heat of H₂ adsorption from 5.1–4.2 kJ mol^?1 to 5.5–4.4 kJ mol^?1.