Five-hundred-milliwatts distributed-feedback diode laser emitting at 940 nm

A DFB laser emitting at a wavelength around 940 nm in a single longitudinal mode up to an output power of 500 mW with a side mode suppression ratio greater than 50 dB is presented. More than 4 nm tuning range was reached by varying the current between 100 and 800 mA. Up to a power of about 300 mW, the lateral far field revealed stable fundamental mode operation.     

Lasing of a single crystal Nd fluoride fiber

We present laser action in a single crystal fluoride fiber obtained by the micro-pulling-down technique. The 700 μm diameter and 1 cm long Nd:LiYF₄ fiber was pumped by a beam shaped diode bar emitting at 806 nm. A peak power of 300 mW was achieved with a slope efficiency of 12%. When considering the pump power fraction absorbed by the laser mode, a slope efficiency of 37% was achieved. To the best of our knowledge, this is the first report of a Nd: LiYF₄ fiber laser.     

Self-Frequency-Doubling Ytterbium Lasers

Ytterbium-doped self-frequency-doubling lasers offer high efficiency, tunable, visible and near-infrared, cw and pulsed operation from compact devices. We review the performance of ytterbium-doped yttrium aluminium borate (Yb:YAB) self-frequency-doubling lasers. Because of the detailed dynaMisc of the interaction of the nonlinear pulse shaping process for mode-locking or for Q-switching self-frequency-doubled lasers, we observe pulse lengthening in each process when frequency doubling is optimised, with high average output power. However, for continuous wave operation, the self-frequency doubling process may be optimised to give highly efficient, robust, widely-tunable output in the visible as well as fundamental output in the infrared.     

Suppression of Q-switching instabilities in broadened-waveguide monolithic mode-locked laser diodes

It is predicted theoretically that broadening the optical confinement layer in monolithic mode-locked semiconductor lasers may suppress Q-switching instability, by increasing the carrier transport time, and lead to emission of shorter, more stable optical pulses.     

GaInAsSb/AlGaAsSb lasers in the wavelength range between 2.73 μm and 2.93 μm

Compressively strained multiple quantum well lasers in the GaInAsSb/AlGaAsSb material system are reported. Indium concentrations between 40% and 47.5% were chosen for the GaInAsSb quantum wells. Compressive strains varied between 1.16% and 1.43%. The lasers worked continuous wave at room temperature up to a wavelength of 2.81 μm. For a laser with 2.93 μm wavelength continuous wave operation was found up to a temperature of −23°C. This laser worked in pulsed operation at 15°C.     

Assignment of Fir Laser Lines of Fully Deuterated Dichloromethane

We have recently reported 16 new far-infrared laser emissions of CD₂Cl₂. While the overwhelming majority of the previously known FIR laser emissions of this molecule were polarized parallel to the polarization of the pump CO₂ line, 13 of our 16 new lines are polarized perpendicularly to the exciting CO₂ radiation. In principle, the presence of perpendicular/parallel emission pairs is extremely important for the assignment of laser transitions. In the present work we discuss the possible assignments of 16 far-infrared (FIR) laser emission pairs of CD₂Cl₂.     

Optically pumped potassium laser

We present an optically pumped continuous wave potassium vapor laser operating in a single longitudinal and a single transverse mode at 770 nm. The measured value of the input power to the output power slope efficiency was 20%.     

A small scale, supersonic chemical oxygen-iodine laser

A supersonic chemical oxygen-iodine laser of 5 cm long active medium has been operated utilizing a simple sparger-type O₂(¹Δ) chemical generator and a medium size pumping system. A grid nozzle was used for iodine injection and supersonic expansion. 9 W of cw laser emission at 1315 nm were obtained in the present experiments. The small size and the simple structure of the laser system and its stable operation for long periods make it a convenient tool for studying parameters important for high-power supersonic iodine lasers.     

Highly efficient optically pumped cesium vapor laser

We have demonstrated an optically pumped continuous wave Cs vapor laser with an input power to output power slope efficiency of 81%. The laser power was 0.35 W for an input power of 0.57 W, yielding an overall optical efficiency of 63%.     

Propagation parameters of the beam extracted from a diode pumped Nd:YAG ceramic slab laser with a hybrid stable–unstable resonator

We analyze the propagation properties of the beam extracted from a diode pumped ceramic Nd:YAG slab laser adopting a hybrid stable–unstable resonator. Such a resonator produces a beam characterized by an Hermite–Gauss mixture-like distribution in one transverse direction and a hard-edge diffracted distribution on the other transverse direction. The beam propagation parameters M_x² and M_y² are measured for different values of the diodes driving current. We obtain a beam parameter product smaller than 3 mm mrad in both transverse directions and in the whole range of powers, up to an extraction of 220 W in a QCW regime.     

Random distributed feedback fibre lasers

The concept of random lasers exploiting multiple scattering of photons in an amplifying disordered medium in order to generate coherent light without a traditional laser resonator has attracted a great deal of attention in recent years. This research area lies at the interface of the fundamental theory of disordered systems and laser science. The idea was originally proposed in the context of astrophysics in the 1960s by V.S. Letokhov, who studied scattering with “negative absorption” of the interstellar molecular clouds. Research on random lasers has since developed into a mature experimental and theoretical field. A simple design of such lasers would be promising for potential applications. However, in traditional random lasers the properties of the output radiation are typically characterized by complex features in the spatial, spectral and time domains, making them less attractive than standard laser systems in terms of practical applications. Recently, an interesting and novel type of one-dimensional random laser that operates in a conventional telecommunication fibre without any pre-designed resonator mirrors–random distributed feedback fibre laser–was demonstrated. The positive feedback required for laser generation in random fibre lasers is provided by the Rayleigh scattering from the inhomogeneities of the refractive index that are naturally present in silica glass. In the proposed laser concept, the randomly backscattered light is amplified through the Raman effect, providing distributed gain over distances up to 100 km. Although an effective reflection due to the Rayleigh scattering is extremely small (∼0.1%), the lasing threshold may be exceeded when a sufficiently large distributed Raman gain is provided. Such a random distributed feedback fibre laser has a number of interesting and attractive features. The fibre waveguide geometry provides transverse confinement, and effectively one-dimensional random distributed feedback leads to the generation of a stationary near-Gaussian beam with a narrow spectrum. A random distributed feedback fibre laser has efficiency and performance that are comparable to and even exceed those of similar conventional fibre lasers. The key features of the generated radiation of random distributed feedback fibre lasers include: a stationary narrow-band continuous modeless spectrum that is free of mode competition, nonlinear power broadening, and an output beam with a Gaussian profile in the fundamental transverse mode (generated both in single mode and multi-mode fibres).     

Single-walled carbon nanotubes on side polished fiber as a universal saturable absorber for various laser output states

We demonstrated four different laser operational states in the same passive fiber ring laser cavity by controlling solely the polarization state in a saturable absorber. The demonstrated laser operational states were continuous wave, mode-locking, Q-switching, and Q-switched mode-locking. The saturable absorber was fabricated by spin-coating a single-walled carbon nanotubes (SWCNT)/polymer composite on a side polished fiber providing enhanced nonlinear interaction with the SWCNT. The wide tuning range of the saturable absorber allows the simple means to generate different forms of laser output from a single laser cavity.     

Theory of tunable FIR laser

Tunable properties of optically pumped FIR lasers have been studied on the basis of sixlevel quantum system approach. The signal flow graph method was used to solve the density matrix equations. A set of tuning characteristic curves has been obtained in good agreement with the experimental results for optically pumped HF FIR lasers given by A. de Martino et al.     

二极管泵浦高能激光研究进展和展望

高能激光广泛应用于材料加工、科学研究、空间碎片清除、军事应用等领域。二极管泵浦高能激光具有结构紧凑,系统简单、全电驱无限弹仓的特点,近年来,各类二极管泵浦高能激光围绕着同时实现高功率、高效率、高光束质量这一总目标发展迅速。详细综述了国内外高平均功率块状固体激光、高功率可见光波段激光、高峰值功率激光、高功率光纤激光、碱金属蒸气激光等二极管泵浦高能激光的研究进展,并对其发展趋势进行了展望。     

Low-threshold interband cascade lasers operating above room temperature

Mid-IR type-II interband cascade lasers were demonstrated in pulsed mode at temperatures up to 325 K and in continuous mode up to 200 K. At 80 K, the threshold current density was 8.9 A/cm² and a continuous wave output power of 140 mW/facet was obtained.     

The energy exchange and the optimum length of the sample tube of opfirl

The energy exchange between the pumping laser and FIR signal in the optically pumped FIR laser (OPFIRL) system was studied. The iteration method has been used to calculate the power density of the pumping and FIR signals at any point along the optical axis of the sample tube. It was found that the power density of the FIR signal did not always increase along the length of the laser tube. There was a maximum FIR power density at the appropriate point in the sample tube. If the distance of maximum power point from the entrance of the OPFIRL tube was taken as the length of sample tube Z_opt, the maximum FIR laser output should be obtained. This was the optimum length of OPFIRL tube. The value of Z_opt was closely related to the parameter of OPFIRL such as the pumping power density, the pumping detuning and the frequency of the FIR laser. The energy-exchange and the maximum output of the fir laser were calculated under the ideal condition.     

Simultaneous generation of violet,blue, and green lasers using Nd:YAl3(BO3)4 channel waveguides under pumping at 815 nm

Violet, blue, and green lasers were simultaneously generated by nonlinear processes using ultrafast laser inscribed neodymium‐doped yttrium aluminum borate (Nd:YAl₃(BO₃)₄ or Nd:YAB) channel waveguides under pumping at 815 nm. These visible lasers were generated by the frequency doubling, self‐frequency summing, and self‐frequency doubling processes based on a 1062 nm laser radiation that corresponded to the ⁴F_3/2 → ⁴I_11/2 transition of Nd³⁺ ions. Further, the wavelength tunability for the violet and blue lasers was achieved by simply tuning the pump wavelength within the ⁴I_9/2 → ⁴F_5/2 transition. The results obtained indicate that Nd:YAB waveguides are promising candidates for efficient compact visible laser sources. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

稀土化合物材料上转换发光与激光的研究与进展

多年来凝聚态物质中稀土离子的发光研究一直受到重视。近年来由于半导体激光器的迅速发展与商品化以及高浓度稀土离子激光新材料研究的迅速发展，共振泵浦的紧凑全固化稀土离子固体激光器的研究在国际上已形成一个热潮；带动了固体激光研究的全面复兴。期 中上转换激光器是激光器紧凑全固化潮流的一个最新发展。它是极有的潜力的三种紧凑蓝绿激光器方案之一，弥补了半导体激光向短波长方向发展的不足与困难。它对于发展光盘技术、信     

Broadband Hybridly Polarized Vector Vortex Raman Microchip Laser

Hybridly polarized (HP) vector vortex Raman lasers dramatically extend their applications on optical microscopy, optical communication, and quantum information. Spatial light modulators and waveplates are widely used for generating HP vector vortex lasers, however, the performance and beam quality of HP vector vortex lasers are restricted by diffraction loss and low damage threshold of these optical elements. Here, HP vector vortex Raman microchip lasers constructed with Yb³⁺:Y₃Al₅O₁₂ (Yb:YAG) and vanadate (YVO₄) crystals is demonstrated. The states of polarization (SoP) of HP vector vortex lasers are combination of radial and anti-radial polarizations (RP-ARP), azimuthal and anti-azimuthal polarizations (AP-AAP). The SoP of HP vector vortex lasers can be controlled by adjusting the length of YVO₄ crystal and applying pump power. Maximum output powers are 456 and 586 mW with optical efficiency of 7.1% and 9.2% for HP vector vortex lasers with SoP of RP-ARP and AP-AAP. The HP vector vortex Raman lasers with SoP of RP-ARP and AP-AAP oscillate ≈1076 nm with bandwidths of 11.4 and 10.8 nm. High beam quality is achieved for HP vector vortex lasers with measured M² nearly equal to theoretical value. The broadband HP vector vortex Raman lasers with high beam quality extend applications on optical trapping, and quantum information processing.     

Tm3+:Ho3+共掺石英光纤激光器的实验研究

用铥钬共掺石英光纤,在钛宝石激光泵浦下,获得了波长为1870 nm、最大功率为240 mW的单模激光输出,斜率效率接近31％这是目前用该类光纤获得的最高转换效率研究了输出激光功率、输出光谱随泵浦功率、激活光纤长度的变化关系,并对相应结果进行了分析