Crystal structure,thermal properties and detonation characterization of bis(5‐amino‐1,2,4‐triazol‐4‐ium‐3‐yl)methane dichloride

Bis(5‐amino‐1,2,4‐triazol‐4‐ium‐3‐yl)methane dichloride (BATZM·Cl₂ or C₅H₁₀N₈²⁺·2Cl^?) was synthesized and crystallized, and the crystal structure was characterized by single‐crystal X‐ray diffraction; it belongs to the space group C2/c (monoclinic) with Z = 4. The structure of BATZM·Cl₂ can be described as a V‐shaped molecule with reasonable chemical geometry and no disorder, and its one‐dimensional structure can be described as a rhombic helix. The specific molar heat capacity (C_p,m) of BATZM·Cl₂ was determined using the continuous C_p mode of a microcalorimeter and theoretical calculations, and the C_p,m value is 276.18 J K^?1 mol^?1 at 298.15 K. The relative deviations between the theoretical and experimental values of C_p,m, H_T – H_298.15K and S_T – S_298.15K of BATZM·Cl₂ are almost equivalent at each temperature. The detonation velocity (D) and detonation pressure (P) of BATZM·Cl₂ were estimated using the nitrogen equivalent equation according to the experimental density; BATZM·Cl₂ has a higher detonation velocity (7143.60 ± 3.66 m s^?1) and detonation pressure (21.49 ± 0.03 GPa) than TNT. The above results for BATZM·Cl₂ are compared with those of bis(5‐amino‐1,2,4‐triazol‐3‐yl)methane (BATZM) and the effect of salt formation on them is discussed.     

Crystal structure,thermal behaviour and detonation characterization of bis(4,5‐diamino‐1,2,4‐triazol‐3‐yl)methane monohydrate

Bis(4,5‐diamino‐1,2,4‐triazol‐3‐yl)methane monohydrate (BDATZM·H₂O or C₅H₁₀N₁₀·H₂O) was synthesized and its crystal structure characterized by single‐crystal X‐ray diffraction; it belongs to the space group P (triclinic) with Z = 2. The structure of BDATZM·H₂O can be described as a two‐dimensional ladder plane with extensive hydrogen bonding and no disorder. The thermal behaviour was studied under non‐isothermal conditions by differential scanning calorimetry (DSC) and thermogravimetric/differential thermogravimetric (TG/DTG) methods. The detonation velocity (D) and detonation pressure (P) of BDATZM were estimated using the nitrogen equivalent equation according to the experimental density. A comparison between BDATZM·H₂O and bis(5‐amino‐1,2,4‐triazol‐3‐yl)methane (BATZM) was made to determine the effect of the amino group; the results suggest that the amino group increases the hydrophilicity, space utilization and energy, and decreases the thermal stability and symmetry of the resulting compound.     

A simple hydrated salt with a complex hydrogen‐bonding network: tetrakis(5‐amino‐3‐carboxy‐4H‐1,2,4‐triazol‐1‐ium) hexachloridocadmate(II) tetrahydrate

In the title cadmium chloride salt, (C₃H₅N₄O₂)₄[CdCl₆]·4H₂O, the asymmetric unit comprises two N‐protonated 5‐amino‐3‐carboxy‐4H‐1,2,4‐triazol‐1‐ium cations, half a [CdCl₆]⁴⁻ anion and two molecules of water. The Cd²⁺ cation is located on a centre of inversion and is coordinated by six chloride anions, forming a distorted octahedron. In the crystal structure, alternating layers of cations and anions are arranged along the [101] direction, forming a three‐dimensional supramolecular network via a combination of hydrogen‐bonding and aromatic stacking interactions.     

The effect of the coordination orientation of N atoms on polymeric structures: synthesis and characterization of one‐ and two‐dimensional CuII coordination polymers based on 4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐3‐ylmethyl)sulfanyl]‐1,2,4‐triazole

Three new one‐ (1D) and two‐dimensional (2D) Cu^II coordination polymers, namely poly[[bis{μ₂‐4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐3‐ylmethyl)sulfanyl]‐1,2,4‐triazole}copper(II)] bis(methanesulfonate) tetrahydrate], {[Cu(C₁₃H₁₂N₅S)₂](CH₃SO₃)₂·4H₂O}_n ( 1 ), catena‐poly[[copper(II)‐bis{μ₂‐4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐4‐ylmethyl)sulfanyl]‐1,2,4‐triazole}] dinitrate methanol disolvate], {[Cu(C₁₃H₁₂N₅S)₂](NO₃)₂·2CH₃OH}_n ( 2 ), and catena‐poly[[copper(II)‐bis{μ₂‐4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐4‐ylmethyl)sulfanyl]‐1,2,4‐triazole}] bis(perchlorate) monohydrate], {[Cu(C₁₃H₁₂N₅S)₂](ClO₄)₂·H₂O}_n ( 3 ), were obtained from 4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐3‐ylmethyl)sulfanyl]‐1,2,4‐triazole with pyridin‐3‐yl terminal groups and from 4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐4‐ylmethyl)sulfanyl]‐1,2,4‐triazole with pyridin‐4‐yl terminal groups. Compound 1 displays a 2D net‐like structure. The 2D layers are further linked through hydrogen bonds between methanesulfonate anions and amino groups on the framework and guest H₂O molecules in the lattice to form a three‐dimensional (3D) structure. Compound 2 and 3 exhibit 1D chain structures, in which the complicated hydrogen‐bonding interactions play an important role in the formation of the 3D network. These experimental results indicate that the coordination orientation of the heteroatoms on the ligands has a great influence on the polymeric structures. Moreover, the selection of different counter‐anions, together with the inclusion of different guest solvent molecules, would also have a great effect on the hydrogen‐bonding systems in the crystal structures.     

Synthesis,Characterization and Crystal Structure of the Dimeric Silver(I) Complex containing 4‐Amino‐5‐methyl‐2H‐1,2,4‐triazole‐3(4H)‐thione

The reaction of 4‐amino‐5‐methyl‐2H‐1,2,4‐triazole‐3(4H)‐thione (AMTT, 1 ) with AgNO₃ and triphenylphosphane in a molar ratio 1:1:2 in ethanol led to the dimeric complex {[Ag(AMTT)(PPh₃)₂]NO₃}₂·4EtOH ( 2 ). 2 was characterized by elemental analyses, IR, ³¹P NMR spectroscopy as well as single crystal X‐ray diffraction. Crystal data for 2 at ?80 °C: space group with a = 1265.5(2), b = 1300.9(2), c = 1509.5(2) pm, α = 83.77(2)°, β = 79.22(2)°, γ = 62.89(2)°, Z = 2, R₁ = 0.0330.     

Catalyst‐ and solvent‐free synthesis of 2‐fluoro‐N‐(3‐methylsulfanyl‐1H‐1,2,4‐triazol‐5‐yl)benzamide through a microwave‐assisted Fries rearrangement: X‐ray structural and theoretical studies

An efficient approach for the regioselective synthesis of (5‐amino‐3‐methylsulfanyl‐1H‐1,2,4‐triazol‐1‐yl)(2‐fluorophenyl)methanone, C₁₀H₉FN₄OS, (3), from the N‐acylation of 3‐amino‐5‐methylsulfanyl‐1H‐1,2,4‐triazole, (1), with 2‐fluorobenzoyl chloride has been developed. Heterocyclic amide (3) was used successfully as a strategic intermediate for the preparation of 2‐fluoro‐N‐(3‐methylsulfanyl‐1H‐1,2,4‐triazol‐5‐yl)benzamide, C₁₀H₉FN₄OS, (4), through a microwave‐assisted Fries rearrangement under catalyst‐ and solvent‐free conditions. Theoretical studies of the prototropy process of (1) and the Fries rearrangement of (3) to provide (4), involving the formation of an intimate ion pair as the key step, were carried out by density functional theory (DFT) calculations. The crystallographic analysis of the intermolecular interactions and the energy frameworks based on the effects of the different molecular conformations of (3) and (4) are described.     

Grid‐like Cobalt(II) Layered Complex with an Unprecedented Double 1,2‐Bis(1,2,4‐triazole‐1‐yl)methane Bridges

A novel two‐dimensional cobalt complex, [Co(btrm)₂(dca)]ClO₄ ( 1 , btrm = 1,2‐bis(1,2,4‐triazole‐1‐yl)methane, dca = dicyanamide), was synthesized and characterized. X‐ray diffraction analyses reveal that the title complex crystallizes in the monoclinic space group C2/m with a = 29.507(13)Å, b = 17.804(8) Å, c = 14.709(7) Å, β = 119.916(7)°, Z = 12, and R₁ = 0.0784, wR₂ = 0.2041. The cobalt atom involves a six‐coordinated CoN₆ environment, with a distorted octahedral coordination. Two btrm ligands connect the Co^II atoms with the exodentate nitrogen atoms on the 4‐position of triazole rings to form a sixteen‐membered rhombic grid. The unprecedented double btrm bridges and μ_1,5‐dca bridge connect the cobalt atoms to form a two‐dimensional grid‐like layered structure. The spectroscopic and magnetic properties have also been investigated.     

Two new cadmium(II) coordination polymers based on bis(1,2,4‐triazol‐1‐yl)alkane ligands and pyrazine‐2,3‐dicarboxylic acid

Assemblies of pyrazine‐2,3‐dicarboxylic acid and Cd^II in the presence of bis(1,2,4‐triazol‐1‐yl)butane or bis(1,2,4‐triazol‐1‐yl)ethane under ambient conditions yielded two new coordination polymers, namely poly[[tetraaqua[μ₂‐1,4‐bis(1,2,4‐triazol‐1‐yl)butane‐κ²N⁴:N^4′]bis(μ₂‐pyrazine‐2,3‐dicarboxylato‐κ³N¹,O²:O³)dicadmium(II)] dihydrate], {[Cd₂(C₆H₂N₂O₄)₂(C₈H₁₂N₆)(H₂O)₄]·2H₂O}_n, (I), and poly[[diaqua[μ₂‐1,2‐bis(1,2,4‐triazol‐1‐yl)ethane‐κ²N⁴:N^4′]bis(μ₃‐pyrazine‐2,3‐dicarboxylato‐κ⁴N¹,O²:O³:O^3′)dicadmium(II)] dihydrate], {[Cd₂(C₆H₂N₂O₄)₂(C₆H₈N₆)(H₂O)₂]·2H₂O}_n, (II). Complex (I) displays an interesting two‐dimensional wave‐like structure and forms a distinct extended three‐dimensional supramolecular structure with the help of O—H...N and O—H...O hydrogen bonds. Complex (II) has a three‐dimensional framework structure in which hydrogen bonds of the O—H...N and O—H...O types are found.     

Synthesis,structure and biological activity studies of 2‐[(1H‐1,2,4‐triazol‐1‐yl)methyl]‐1‐aryl)‐3‐ferrocenyl prop‐2‐en‐1‐one derivatives

Fifteen new ferrocene derivatives containing 1H‐1,2,4‐triazole moiety were synthesized in various yields by the condensation of ferrocenecarboxaldehyde with 1‐aryl‐3‐(1H‐1,2,4‐triazo‐1‐yl)‐propen‐1‐ones in toluene. Their structures have been confirmed by ¹H NMR, IR, MS and elemental analysis. In addition, the crystal structure of 4l was determined. The antifungal and plant growth regulatory activities of the title compounds are discussed. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and crystal structure of a two‐dimensional sodium coordination polymer of 4,4′‐(diazenediyl)bis(1H‐1,2,4‐triazol‐5‐one)

The crystal engineering of coordination polymers has aroused interest due to their structural versatility, unique properties and applications in different areas of science. The selection of appropriate ligands as building blocks is critical in order to afford a range of topologies. Alkali metal cations are known for their mainly ionic chemistry in aqueous media. Their coordination number varies depending on the size of the binding partners, and on the electrostatic interaction between the ligands and the metal ions. The two‐dimensional coordination polymer poly[tetra‐μ‐aqua‐[μ₄‐4,4′‐(diazenediyl)bis(5‐oxo‐1H‐1,2,4‐triazolido)]disodium(I)], [Na₂(C₄H₂N₈O₂)(H₂O)₄]_n, (I), was synthesized from 4‐amino‐1H‐1,2,4‐triazol‐5(4H)‐one (ATO) and its single‐crystal structure determined. The mid‐point of the imino N=N bond of the 4,4′‐(diazenediyl)bis(5‐oxo‐1H‐1,2,4‐triazolide) (ZTO²⁻) ligand is located on an inversion centre. The asymmetric unit consists of one Na⁺ cation, half a bridging ZTO²⁻ ligand and two bridging water ligands. Each Na⁺ cation is coordinated in a trigonal antiprismatic fashion by six O atoms, i.e. two from two ZTO²⁻ ligands and the remaining four from bridging water ligands. The Na⁺ cation is located near a glide plane, thus the two bridging O atoms from the two coordinating ZTO²⁻ ligands are on adjacent apices of the trigonal antiprism, rather than being in an anti configuration. All water and ZTO²⁻ ligands act as bridging ligands between metal centres. Each Na⁺ metal centre is bridged to a neigbouring Na⁺ cation by two water molecules to give a one‐dimensional [Na(H₂O)₂]_n chain. The organic ZTO²⁻ ligand, an O atom of which also bridges the same pair of Na⁺ cations, then crosslinks these [Na(H₂O)₂]_n chains to form two‐dimensional sheets. The two‐dimensional sheets are further connected by intermolecular hydrogen bonds, giving rise to a stabile hydrogen‐bonded network.     

Syntheses of 4‐(5‐oxo‐1,2,4‐triazol‐3‐yl)‐sydnones and 4‐(4‐arylamino‐5‐oxo‐1,2,4‐triazol‐3‐yl)‐sydnones from Sydnone Derivatives and Their Fragments

4‐(5‐oxo‐1,2,4‐triazol‐3‐yl)‐sydnones 11 and 4‐(4‐arylamino‐5‐oxo‐1,2,4‐triazol‐3‐yl)‐sydnones 13 have been obtained from a‐chloroformylarylhydrazine hydrochloride 2 . Moreover, the intermediates, including 3, 4 , 9 and 10 , in this study are synthetically informative and valuable. It is also noteworthy that three reactants, 1, 2 and sydnonecarbaldehydes, were prepared from sydnone derivatives and their fragments. The oxidative cyclizations of sydnonecarbaldehyde semicarbazones 9 and carbazones 10 with two different oxidizing agents (Cu(ClO₄)₂ and Fe(ClO₄)₃) have been extensively examined. The reaction time and the yields of cyclizations were affected by the substituents of semicarbazones 9 and carbazones 10.     

Synthesis,crystal structure and characterization of a three‐dimensional CdII coordination polymer constructed from 2,5‐bis(1H‐1,2,4‐triazol‐1‐yl)terephthalate

Bifunctional organic ligands are very popular for the design of coordination polymers because they allow the formation of a great diversity of structures. In the title coordination polymer, the new bifunctional inversion‐symmetric ligand 2,5‐bis(1H‐1,2,4‐triazol‐1‐yl)terephthalic acid (abbreviated as H₂bttpa) links Cd^II cations, giving rise to the three‐dimensional Cd^II coordination polymer catena‐poly[diaqua[μ₄‐2,5‐bis(1H‐1,2,4‐triazol‐1‐yl)terephthalato‐κ⁴O¹:O⁴:N⁴:N^4′]cadmium(II)], [Cd(C₁₂H₆N₆O₄)(H₂O)₂]_n or [Cd(bttpa)(H₂O)₂]_n. The asymmetric unit consists of half a Cd^II cation, half a bttpa²⁻ ligand and one coordinated water molecule. The Cd^II cation is located on a twofold axis and is hexacoordinated in a distorted octahedral environment of four O and two N atoms. Four different bttpa²⁻ ligands contribute to this coordination, with two carboxylate O atoms in trans positions and two triazole N atoms in cis positions. Two aqua ligands in cis positions complete the coordination sphere. The fully deprotonated bttpa²⁻ ligand sits about a crystallographic centre of inversion and links two Cd^II cations to form a chain in a μ₂‐terephthalato‐κ²O¹:O⁴ bridge. This chain extends in the other two directions via the triazole heterocycles, producing a three‐dimensional framework. O—H…O hydrogen bonds and weak C—H…N interactions stabilize the three‐dimensional crystal structure. The FT–IR spectrum, X‐ray powder pattern, thermogravimetric behaviour and solid‐state photoluminescence of the title polymer have been investigated. The photoluminescence is enhanced and red‐shifted with respect to the uncoordinated ligand.     

Synthesis,structure and DNA cleavage of mononuclear Fe(III) complexes with 1,2,4‐triazole‐base ligand

Two new mononuclear iron(III) complexes, [Fe(HL)₂](ClO₄) · (H₂O)_1.75· CH₃CN (1) and [Fe(HL)Cl₂] · DMF (2) [H₂L = 3‐(2‐phenol)‐5‐(pyridin‐2‐yl)‐1,2,4‐triazole] have been synthesized and characterized by X‐ray single‐crystal structure analysis. The single crystal X‐ray crystallographic studies reveal that the central iron atom has a distorted octahedral environment for 1 and a distorted square pyramidal geometry for 2. The DNA cleavage activity of the iron(III) complexes was measured, indicating that the six‐coordinated iron(III) (complex 1) was cleavage inactive and only five‐coordinated complex 2 effectively promoted the cleavage of plasmid DNA in the presence and/or absence of activating agents (peroxide oxygen) at physiological pH and temperature. The mechanism of plasmid DNA cleavage was also studied by adding standard radical scavengers. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and Antifungal Activities of ω‐[4‐Aryl‐5‐(1‐phenyl‐5‐methyl‐1,2,3‐triazol‐4‐yl)‐1,2,4‐triazol‐3‐thio]‐ω‐(1H‐1,2,4‐triazol‐1‐yl)acetophenones

New 4‐aryl‐5‐(1‐phenyl‐5‐methyl‐1,2,3‐triazol‐4‐yl)‐1,2,4‐triazol‐3‐thiones 3 have been synthesized by the intramolecular cyclization of 4‐aryl‐1‐(1‐phenyl‐5‐methyl‐1,2,4‐triazol‐4‐formyl)thiosemicarbazides 2 with an 8% NaOH solution, and then 3 reacted with ω‐bromo‐ω‐(1H‐1,2,4‐triazol‐1‐yl)acetophenone to afford ω‐[4‐aryl‐5‐(1‐phenyl‐5‐methyl‐1,2,3‐triazol‐4‐yl)‐1,2,4‐triazol‐3‐thio]‐ω‐(1H‐1,2,4‐triazol‐1‐yl)‐acetophenones 4 . The preliminary biological test showed that the representative compounds possess some anti fungal activities.     

A three‐dimensional cadmium coordination polymer based on 1,4‐bis(1,2,4‐triazol‐1‐yl)but‐2‐ene and benzene‐1,3,5‐tricarboxylic acid

The Cd^II three‐dimensional coordination poly[[[μ₄‐1,4‐bis(1,2,4‐triazol‐1‐yl)but‐2‐ene]bis(μ₃‐5‐carboxybenzene‐1,3‐dicarboxylato)dicadmium(II)] dihydrate], {[Cd₂(C₉H₄O₆)₂(C₈H₁₀N₆)]·2H₂O}_n , (I), has been synthesized by the hydrothermal reaction of Cd(NO₃)₂·4H₂O, benzene‐1,3,5‐tricarboxylic acid (1,3,5‐H₃BTC) and 1,4‐bis(1,2,4‐triazol‐1‐yl)but‐2‐ene (1,4‐btbe). The IR spectrum suggests the presence of protonated carboxylic acid, deprotonated carboxylate and triazolyl groups. The purity of the bulk sample was confirmed by elemental analysis and X‐ray powder diffraction. Single‐crystal X‐ray diffraction analysis reveals that the Cd^II ions adopt a five‐coordinated distorted trigonal–bipyramidal geometry, coordinated by three O atoms from three different 1,3,5‐HBTC²⁻ ligands and two N atoms from two different 1,4‐btbe ligands; the latter are situated on centres of inversion. The Cd^II centres are bridged by 1,3,5‐HBTC²⁻ and 1,4‐btbe ligands into an overall three‐dimensional framework. When the Cd^II centres and the tetradentate 1,4‐btbe ligands are regarded as nodes, the three‐dimensional topology can be simplified as a binodal 4,6‐connected network. Thermogravimetric analysis confirms the presence of lattice water in (I). Photoluminescence studies imply that the emission of (I) may be ascribed to intraligand fluorescence.     

Concomitant polymorphic forms of 3‐cyclopropyl‐5‐(2‐hydrazinylpyridin‐3‐yl)‐1,2,4‐oxadiazole

The dipharmacophore compound 3‐cyclopropyl‐5‐(2‐hydrazinylpyridin‐3‐yl)‐1,2,4‐oxadiazole, C₁₀H₁₁N₅O, was studied on the assumption of its potential biological activity. Two concomitant polymorphs were obtained on crystallization from isopropanol solution and these were thoroughly studied. Identical conformations of the molecules are found in both structures despite the low difference in energy between the four possible conformers. The two polymorphs differ crucially with respect to their crystal structures. A centrosymmetric dimer formed due to both stacking interactions of the `head‐to‐tail' type and N—H…N(π) hydrogen bonds is the building unit in the triclinic structure. The dimeric building units form an isotropic packing. In the orthorhombic polymorphic structure, the molecules form stacking interactions of the `head‐to‐head' type, which results in their organization in a column as the primary basic structural motif. The formation of N—H…N(lone pair) hydrogen bonds between two neighbouring columns allows the formation of a double column as the main structural motif. The correct packing motifs in the two polymorphs could not be identified without calculations of the pairwise interaction energies. The triclinic structure has a higher density and a lower (by 0.60 kcal mol^?1) lattice energy according to periodic calculations compared to the orthorhombic structure. This allows us to presume that the triclinic form of 3‐cyclopropyl‐5‐(2‐hydrazinylpyridin‐3‐yl)‐1,2,4‐oxadiazole is the more stable.     

Crystal structure of 5,6‐bis(9H‐carbazol‐9‐yl)benzo[c][1,2,5]thiadiazole: distortion from a hypothetical higher‐symmetry structure

Nucleophilic substitution of F atoms in 5,6‐difluorobenzo[c ][1,2,5]thiadiazole (DFBT) for carbazole could be potentially interesting as a novel way of synthesizing building blocks for new conjugated materials for applications in organic chemistry. The crystal structures of 5,6‐bis(9H‐carbazol‐9‐yl)benzo[c ][1,2,5]thiadiazole (DCBT), C₃₀H₁₈N₄S, and its hydrate, C₃₀H₁₈N₄S·0.125H₂O, were investigated using single‐crystal X‐ray analysis. The hydrate contains two symmetry‐independent DCBT molecules. The dihedral angles between the plane of the central benzothiadiazole fragment and that of the carbazole units vary between 50.8 and 69.9°, indicating conformational flexibility of the DCBT molecule in the crystals, which is consistent with quantum chemical calculations. The analysis of the crystal packing of DCBT revealed that the experimental triclinic structure could be described as a distortion from a hypothetical higher‐symmetry monoclinic structure. The quantum chemical calculations of two possible monoclinic structures, which are related to the experimental structure by a shifting of molecular layers, showed that the proposed structures are higher in energy by 5.4 and 10.1 kcal mol⁻¹. This energy increase is caused by less dense crystal packings of the symmetric structures, which results in a decrease of the number of intermolecular interactions.     

Design and synthesis of methyl 2‐{[4‐phenyl‐5‐(pyridin‐2‐yl)‐4H‐1,2,4‐triazol‐3‐yl]sulfanyl}acetate (phpy2NS) as a ligand for complexes of Group 12 elements: structural assessment and hydrogen‐bonded supramolecular assembly analysis

The reaction of 2‐cyanopyridine with N‐phenylthiosemicarbazide afforded 2‐[amino(pyridin‐2‐yl)methylidene]‐N‐phenylhydrazine‐1‐carbothioamide (Ham4ph) and crystals of 4‐phenyl‐5‐(pyridin‐2‐yl)‐2,4‐dihydro‐3H‐1,2,4‐triazole‐3‐thione (pyph3NS, 1 , C₁₃H₁₀N₄S). Crystals of methyl 2‐{[4‐phenyl‐5‐(pyridin‐2‐yl)‐4H‐1,2,4‐triazol‐3‐yl]sulfanyl}acetate (phpy2NS, 2 , C₁₆H₁₄N₄O₂S), derived from 1 , were obtained by the reaction of Ham4ph with chloroacetic acid, followed by the acid‐catalyzed esterification of the carboxylic acid with methyl alcohol. Crystals of bis(methanol‐κO)bis(methyl 2‐{[4‐phenyl‐5‐(pyridin‐2‐yl)‐4H‐1,2,4‐triazol‐3‐yl‐κ²N¹,N⁵]sulfanyl}acetato)zinc(II)/cadmium(II) hexabromidocadmate(II), [Zn_0.76Cd_0.24(C₁₆H₁₄N₄O₂S)₂(CH₃OH)₂][Cd₂Br₆] or [Zn_0.76Cd_0.24(phpy2NS)₂(MeOH)₂][Cd₂Br₆], 3 , and dichlorido(methyl 2‐{[4‐phenyl‐5‐(pyridin‐2‐yl)‐4H‐1,2,4‐triazol‐3‐yl‐κ²N¹,N⁵]sulfanyl}acetato)mercury(II), [HgCl₂(C₁₆H₁₄N₄O₂S)] or [Hg(phpy2NS)Cl₂], 4 , were synthesized using ligand 2 and CdBr₂ or HgCl₂, respectively. The molecular and supramolecular structures of the compounds were studied by X‐ray diffractometry. The asymmetric unit of 3 is formed from CdBr₃ and M(phpy2NS)(MeOH) units, where the metal centre M has a 76% occupancy of Zn^II and 24% of Cd^II. The M²⁺ centre of the cation, located on a crystallographic inversion centre, is hexacoordinated and appears as a slightly distorted octahedral [MN₄O₂]²⁺ cation. The Cd centre of the anion is coordinated by two terminal bromide ligands and two bridging bromide ligands that generate [Cd₂Br₆]^2? cadmium–bromide clusters. These clusters display crystallographic inversion symmetry forming two edge‐shared tetrahedra and serve as agents that direct the structure in the formation of supramolecular assemblies. In mononuclear complex 4 , the coordination geometry around the Hg²⁺ ion is distorted tetrahedral and comprises two chloride ligands and two N‐atom donors from the phpy2NS ligand, viz. one pyridine N atom and the other from triazole. In the crystal packing, all four compounds exhibit weak intermolecular interactions, which facilitate the formation of three‐dimensional architectures. Along with the noncovalent interactions, the structural diversity in the complexes can be attributed to the metal centre and to the coordination geometry, as well as to its ionic or neutral character.     

Syntheses,Molecular Structure and Thermodynamic Properties of 3‐Nitro‐1,2,4‐triazol‐5‐one Europium Complex [Eu(NTO)3(H2O)5]·5H2O

3‐Nitro‐1,2,4‐triazol‐5‐one (NTO) europium complex of [Eu(NTO)₃(H₂O)₅]·5H₂O was synthesized by mixing the aqueous solution of lithium 3‐nitro‐1,2,4‐triazol‐5‐onate and the dilute nitric acid solution of europium oxide. The title complex was characterized by elemental analysis and IR spectra. The single crystal structure was determined by a four‐circle x‐ray diffractometer. The title complex is monoclinic with space group P2₁/n and unit cell parameters of a = 1.8720(2) nm, b = 0.6548(3) nm, c = 1.9323(3) nm and β = 95.33(1)°. The coordination geometry around the europium ion is a distorted dodecahedron and there are five crystalline water molecules to form the stable structure of the crystal. From measurements of the enthalpy of solution in water at 298.15 K, the standard enthalpy of formation, lattice enthalpy and lattice energy have been determined as ‐(3798.6 ± 3.7), ?4488.4 and ?4452.4 kJ·mol^?;1, respectively.     

Anion Effects on the Formation of Silver(I) Complexes with the Flexible Ligand 4,4′‐Bis(1,2,4‐triazol‐1‐ylmethyl)biphenyl

The reaction of 4,4′‐bis(1,2,4‐triazol‐1‐ylmethyl)biphenyl (btmb) with silver(I) salts of BF₄^–, NO₃^– and N₃^– led to the formation of four new silver(I) coordination polymers {[Ag(btmb)]BF₄}_n ( 1 ), {[Ag₂(btmb)₃](NO₃)₂(H₂O)₅}_n ( 2 ), [Ag₂(btmb)(N₃)₂]_n ( 3 ), and [Ag(btmb)(N₃)]_n ( 4 ). Their coordination number varies from 2 (in 1 ) to 3 (in 2 ), 4 (in 3 ), and 5 (in 4 ). Different from the single chain structure of 1 , complex 2 displays a 1D ladder‐like double chain framework, whereas complex 3 exhibits a 2D layered architecture. Complex 4 has the same anion as complex 3 but shows a different metal‐to‐ligand ratio and a 1D double‐zigzag chain structure. Both 3 and 4 have Ag ··· Ag argentophilic interactions. The ligand btmb adopts both cis or trans configuration in the studied complexes. A trans‐ or cis‐btmb ligand link silver ions with Ag ··· Ag distances of ≈?18 and 13 Å, respectively. BF₄^– and NO₃^– are non‐coordinating anions in 1 and 2 . N₃^– is the bridging anion in 3 (1,3‐bridging fashion) and 4 (1,1‐bridging fashion). These findings suggest that the coordination numbers around the Ag^I ion correlate to the coordination abilities of anions and the btmb to silver ratio. In addition, the influence of anions on thermal stability were also investigated. This work is a good example that nicely supports the less explored field of anion‐dependent structures of complexes with non‐pyridyl ligands.