Light‐driven and aggregation‐induced emission from side‐chain azoindazole polymers

The well‐defined azoindazole‐containing homopolymer, poly(6‐{6‐[(4‐dimethylamino) phenylazo]‐indazole}‐hexyl methacrylate) (PDHMA), and amphiphilic diblock copolymer, poly({6‐[6‐(4‐dimethylamino)phenylazo]‐indazole}‐hexyl methacrylate)‐b‐poly(2‐(dimethylamino)ethylmethacrylate) (PDHMA_m‐b‐PDMAEMA_n), were successfully prepared via reversible addition‐fragmentation chain transfer polymerization technique. The homopolymer and amphiphilic diblock copolymer in CH₂Cl₂ exhibited intense fluorescence emission accompanied by trans–cis photoisomerization of azoindazole group under UV irradiation. The experiment results indicated that the intense fluorescence emission may be attributed to an inhibition of photoinduced electron transfer of the cis form of azoindazole. On the other hand, the intense fluorescence emission of amphiphilic diblock copolymers in water‐tetrahydrofuran mixture was observed, which increased with the volume ratio of water in the mixed solvent. The self‐aggregation behaviors of three amphiphilic diblock copolymers were examined by transmission electron microscopy, laser light scattering, and UV–vis spectra. The restriction of intramolecular rotation of the azoindazole groups in aggregates was considered as the main cause of aggregation‐induced fluorescence emission. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Photoluminescent and oxygen sensing properties of core–shell nanospheres based on a covalently grafted ruthenium(II) complex

SiO₂ nanospheres coated with silica chemically doped with a ruthenium complex [Ru(Bphen)₂Phen? Si]Cl₂ (denoted as Ru, there Bphen = 4,7‐diphenyl‐1,10‐phenanthrolin, Phen? Si = modified 1,10‐phenathroline) were prepared using a simple solution‐based method. Field‐emission scanning electron microscopy (FE‐SEM) showed that the pure SiO₂ nanospheres with a mean diameter of ～185 nm were successfully coated with Ru complex–chemically doped SiO₂ shell with a thickness of ～45 nm. The obtained core‐shell nanosphere materials exhibited bright red triplet metal‐to‐ligand charge transfer (³MLCT) emission, and their photoluminescent intensity was sensitive to oxygen concentration. These properties make them promising candidates for biomarkers and optical oxygen sensors, which can measure the O₂ concentration in biological fluids. Copyright © 2010 John Wiley & Sons, Ltd.     

微波水热法制备CdS单分散纳米球及其形貌控制

采用微波水热法,以醋酸镉(Cd(CH3COO)2.2H2O)为镉源,硫脲(CS(NH2)2)为硫源,制备出了具有单分散球形形貌的CdS纳米晶。应用X射线衍射仪(XRD)、场发射扫描电子显微镜(FE-SEM)、能量色散谱仪(EDS)、高分辨透射电子显微镜(HR-TEM)、紫外可见吸收光谱(UV-Vis)等测试手段对样品的物相、形貌、元素组分及吸光性能进行了表征,并以罗丹明B溶液的降解脱色反应来考察了其的光催化活性。结果表明:随着S/Cd物质的量比(nS/nCd)逐渐增大,产物会出现由刺球链状向分散球形过渡的规律性变化。在一定的nS/nCd比的条件下可以合成出大小均匀、分散性较好的六方相CdS纳米球。样品对可见光有较强吸收,存在着一定的红移现象。在可见光照射下,硫化镉单分散纳米球具有更高的光催化活性。     

Phosphomolybdic acid supported on Schiff base functionalized graphene oxide nanosheets: Preparation,characterization, and first catalytic application in the multi‐component synthesis of tetrahydrobenzo[a]xanthene‐11‐ones

New Schiff base (SB) functionalized graphene oxide (GO) nanosheets containing phosphomolybdic counter‐anion H₂PMo₁₂O₄₀^¯ (H₂PMo) were successfully prepared by grafting of 3‐aminopropyltriethoxysilane (APTS) on GO nanosheets followed by condensation with benzil and finally reaction with phosphomolybdic acid (H₃PMo₁₂O₄₀, denoted as H₃PMo) and characterized using Fourier transform infrared (FT‐IR) spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), particle size distribution, energy‐dispersive X‐ray (EDX) analysis, EDX elemental mapping, and inductively coupled plasma optical emission spectrometry (ICP‐OES). The prepared new nanomaterial, denoted as GO‐SB‐H₂PMo, was shown to be an efficient heterogeneous catalyst in one‐pot, three‐component reaction of β‐naphthol, aldehydes, and dimedone, giving high yields of tetrahydrobenzo[a]xanthene‐11‐ones within short reaction times. The catalyst is readily recovered by simple filtration and can be recycled and reused several times with no significant loss of catalytic activity.     

High‐Performance Oxygen Sensors Based on EuIII Complex/Polystyrene Composite Nanofibrous Membranes Prepared by Electrospinning

An optical oxygen sensor based on an Eu^III complex/polystyrene (PS) composite nanofibrous membrane is prepared by electrospinning. The emission intensity of [Eu(TTA)₃(phencarz)] (TTA=2‐thenoyltrifluoroacetonate, phencarz=2‐(N‐ethylcarbazolyl‐4)imidazo[4,5‐f]1,10‐phenanthroline) decreases with increasing oxygen concentration, and thus the [Eu(TTA)₃ (phencarz)]/PS composite nanofibrous membranes can be used as an optical oxygen‐sensing material based on emission quenching caused by oxygen. Elemental analysis, UV/Vis absorption spectra, scanning electron microscopy (SEM), fluorescence microscopy, luminescence‐intensity quenching Stern–Volmer plots, and excited‐state decay analysis are used to characterize the obtained oxygen‐sensing materials. A high sensitivity (I_N2/I_O2) of 3.38 and short response and recovery times (t_↓=5.0, t_↑=8.0 s) are obtained. These results are the best values reported for oxygen sensors based on Eu^III complexes. The high surface area‐to‐volume ratio and porous structure of the electrospun nanofibrous membranes are taken to be responsible for the outstanding performance.     

Photovoltaic devices from CdSe nanocrystals and conjugated polymer composites

The preparation of CdSe nanospheres (ns-CdSe) and their application as electron acceptor in conjugated polymer photovoltaic devices are reported. ns-CdSe with diameters of 5 nm were prepared through an organometallic method. The transmission electron microscopy (TEM), ultraviolet-visible (UV-Vis) absorption and photoluminescence (PL) spectra indicate that the CdSe nanocrystals (NCs) are monodispersed nanospheres with the first exciton absorption peak at around 625 nm and the emission peak at around 652 nm. The PL spectra of the ns-CdSe/polymer composite films show that the PL of the conjugated polymers is effectively quenched upon the addition of ns-CdSe. Photovoltaic devices were fabricated from the composites of ns-CdSe and poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) or poly(3-hexylthiophene) (P3HT). Under AM1.5 illumination (100 mW/cm²), the short circuit current (I _SC), open circuit voltage (V _OC), fill factor (FF) and energy conversion efficiency (η) reached 1.56 mA/cm², 0.75 V, 34.5% and 0.40%, respectively for device from the ns-CdSe/MEH-PPV (15: 1 by weight) and 1.93 mA/cm², 0.65 V, 38.4% and 0.48%, respectively for device from the ns-CdSe/P3HT (10: 1 by weight). __________ Translated from Chemical Journal of Chinese Universities, 2007, 28(3): 596–599 [译自: 高等学校化学学报]     

Solvatochromism,Reversible Chromism and Self‐Assembly Effects of Heteroatom‐Assisted Aggregation‐Induced Enhanced Emission (AIEE) Compounds

Two compounds, 9,10‐bis[2‐(quinolyl)vinyl]anthracene (BQVA) and 9,10‐bis[2‐(naphthalen‐2‐yl)vinyl]anthracene (BNVA), have been synthesised and investigated. Both of them have aggregation‐induced enhanced emission (AIEE) properties. Heteroatom‐assisted BQVA shows solvatochromism, reversible chromism properties and self‐assembly effects. When increasing the solvent polarities, the green solution of BQVA turns to orange with a redshift of the fluorescence emission wavelengths from λ=527 to 565 nm. Notably, BQVA exhibits reversible chromism properties, including mechano‐ and thermochromism. The as‐prepared BQVA powders show green fluorescence (λ_em=525 nm) and the colour can turn into orange (λ_em=573 nm) after grinding. Interestingly, the orange colour can return at high temperature. Based on these reversible chromism properties, a simple and convenient erasable board has been designed. Different from BQVA, non‐heteroatom‐assisted BNVA has no clear chromic processes. The results obtained from XRD, differential scanning calorimetry, single‐crystal analysis and theoretical calculations indicate that the chromic processes depend on the heteroatoms in BQVA. Additionally, BQVA also exhibits excellent self‐assembly effects in different solvents. Homogeneous nanospheres are formed in mixtures of tetrahydrofuran and water, which are then doped into silica nanoparticles and treated with 3‐aminopropyltriethoxysilane to give amino‐functionalised nanoparticles (BQVA?AFNPs). The BQVA?AFNPs could be used to stain protein markers in polyacrylamide gel electrophoresis.     

Graft copolymers having hydrophobic backbone and hydrophilic branches. XXIII. Particle size control of poly(ethylene glycol)-coated polystyrene nanoparticles prepared by macromonomer method

Monodisperse polymeric nanospheres, which consist of polystyrene cores and poly(ethylene glycol) (PEG) branches on their surfaces, were prepared by the dispersion copolymerization of styrene (St) with PEG macromonomers that had a methacryloyl (MMA-PEG) or p-vinylbenzyl (St-PEG) end group in various organic solvent/water media. Electron spectroscopy for chemical analysis (ESCA) of the nanosphere surfaces indicated that PEG macromonomer chains were favorably located on their surfaces. The morphologies of the nanospheres were observed via a scanning electron micrograph (SEM), and particle sizes were estimated by a submicron particle analyzer. When both the concentration of macromonomers and molecular weight were higher, small nanospheres in diameter were obtained. Larger nanospheres in diameter were obtained using macromonomers with low molecular weight at lower concentration. The functions that correlate the diameter (D_n) on different concentration units were D_n = K[St]^0.64[MMA-PEG]^{−0.53±0.01}[I]^−0.49 and D_n = K[St]^0.80[St-PEG]^{−0.69±0.01}[I]^−0.22, where [I], [St], [MMA-PEG], and [St-PEG] are initiator, styrene, MMA-PEG, and St-PEG macromonomer concentration in feed, respectively. When the reaction parameters such as the molecular weight of the macromonomers were properly chosen, the particle size could be controlled in a range from ca. 80 to 3100 nm. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2155–2166, 1999     

Self‐Assembly of Anionic Porphyrins and Alkaline or Alkaline Earth Metal Ions Mediated by Cucurbit[7,8]uril

Nanoscaled coordination polymers based on biologically prevalent ions have potential applications in drug delivery and biomedical imaging. Herein, coordination polymer nanoparticles of anionic porphyrins, including meso‐tetra(4‐carboxyphenyl)‐porphyrin (H₂TCPP^4?) and meso‐tetra(4‐sulfonatophenyl)‐porphyrin (H₂TPPS^4?), and alkaline or alkaline earth metal cations, such as K⁺ and Ca²⁺, were constructed in aqueous solution in the presence of cucurbit[7]uril (CB7) or cucurbit[8]uril (CB8). UV/Vis absorption and fluorescence spectroscopy, dynamic light scattering (DLS), scanning electron spectroscopy (SEM), and atomic force microscopy (AFM) were applied to explore the assembly and particle formation of porphyrin anions and metal cations mediated by CBn. The particle size depends on the kinds of CBn and metal cations and their concentrations. The uptake of H₂TPPS^4? particles by tumor cells (A549 cells) was found to be more efficient than H₂TPPS^4? at 37 °C, showing the application potential of such assembled particles in biology and medicine.     

A New Fluorescent Probe for Selective Cd2+ Detection and Cell Imaging

A new highly selective fluorescent probe, (E)‐4‐(4‐([2,2′:6′,2′′‐terpyridin]‐4′‐yl)styryl)‐1‐octadecylpyridin‐1‐ium bromide (ZC‐F8), was designed and synthesized for cadmium detection and cell imaging. The fluorescence spectra of ZC‐F8 exhibited its excellent response towards Cd²⁺ via intramolecular charge transfer effect and aggregation induced emission effect. The cell‐imaging experiment was carried out to estimate the actual biological application of ZC‐F8. The probe displayed ideal membrane permeable and labeled property for cadmium, indicating its promising application for metal ions detection and tracing in living cells.     

Solid‐phase extraction based on a molecularly imprinted polymer nanoshell at the surface of silica nanospheres for the specific enrichment and identification of alkaloids from Crinum asiaticum L. var. sinicum

A molecularly imprinted nanoshell on the surface of silica nanospheres was prepared for specific enrichment and identification of alkaloids from Crinum asiaticum L. var. sinicum . The nanoshell was synthesized by surface polymerization using lycorine as the template, acrylamide as the functional monomer, ethylene glycol dimethacrylate as the cross‐linker, 2′,2‐azobisisobutyronitrile as the initiator and acetonitrile as the pore‐forming agent. The core–shell nanospheres were characterized by transmission electron microscopy and infrared spectroscopy, and the results show that the nanoshell layer was homogeneously attached to the surface of vinyl‐modified SiO₂ nanospheres. The adsorption capacity of the nanospheres was estimated by binding equilibrium and adsorption kinetics experiments. The maximum adsorption amount of lycorine on the nanospheres was 6.68 μmol/g and the imprinting factor was nearly 2.5, indicating a good imprinting effect. The nanospheres were successfully applied in solid‐phase extraction for lycorine from Crinum asaticum L. var. sinicum and detection of target molecule in rat metabolites. The average recoveries of lycorine in Crinum asaticum L. var. sinicum extraction and rat metabolites were 93.5 ± 0.6% (n = 3) and 91.6 ± 1.9% (n = 3), respectively. This work provides a simple approach for the fabrication of a molecularly imprinted nanoshell at the surface of silica nanospheres‐based solid‐phase extraction for drug analysis.     

Salicylaldehyde azine cluster formation observed by cold‐spray ionization mass spectrometry

We installed a cold‐spray ionization (CSI) source on a mass spectrometer to investigate the self‐assembly behavior of an aggregation‐induced emission enhancement system. Using a CSI source and the three‐dimensional platform, a self‐assembly system of a salicylaldehyde azine (SAA) was studied in mixture solution. This method permitted the determination of the structural information of the solution state, which cannot be detected by conventional mass spectrometry. In addition to the [M+H]⁺ ion (M is the SAA molecule), many major ion clusters such as [2M+Na]⁺ at m/z 503, [3M+Na]⁺ at m/z 743, [4M+Na]⁺ at m/z 983 and higher order aggregates were observed in the CSI mass spectra. However, many fragment ions, with the exception of cluster ions, appeared with high abundance when the ESI ion source was used due to the desolvation chamber temperature, suggesting that some aggregation can be detected at low temperatures. To investigate the effect of solvent on the aggregation, the CSI‐mass spectrometry (MS) experiments of SAA in absolute ethanol solution and ethanol/water (good/poor solvent) mixture solution were conducted. The most abundant ion peak was protonated SAA (m/z 241) in absolute ethanol, but many cluster ions and some multiple charged ion peaks were observed after adding a small amount of water into the ethanol solution. The results showed good agreement with that inferred by the combinational analysis of scanning electron microscope and fluorescence microscopy, indicating that CSI‐MS is capable of providing self‐assembly information of labile molecules in the solution state. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and characterization of novel brush copolymers with biodegradable polyphosphoester side chains for gene delivery

A novel kind of pH‐sensitive brush copolymer [poly(2‐hydroxyethyl methacrylate)‐graft‐poly(ethylethylene phosphate)]‐block‐poly[2‐(dimethylamino)ethyl methacrylate] [(PHEMA‐g‐PEEP)‐b‐PDMAEMA] with biodegradable polyphosphoester as the side chains, and its self‐assembled aggregates were developed for nonviral gene delivery. The brush copolymers were synthesized via a combination of single‐electron transfer living radical polymerization and ring‐opening polymerization. The chemical structures of these brush copolymers were characterized by FTIR, ¹H NMR, and ³¹P NMR measurements. The critical aggregation concentration values of (PHEMA‐g‐PEEP)‐b‐PDMAEMA in pH 7.4 buffer solution were determined by the fluorescence probe technique. The interaction of (PHEMA‐g‐PEEP)‐b‐PDMAEMA and DNA was studied by agarose gel retardation assay, and the formed complexes were further investigated by means of zeta potential, dynamic light scattering, and transmission electron microscopy measurements. In addition, the in vitro cytotoxicity and transfection tests indicated that these brush copolymers showed low toxicity and favorable transfection efficiency to HeLa cells. All these results demonstrated that these biocompatible brush copolymers may be a promising candidate as nonviral polymeric gene vector. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Cucurbituril‐Modulated Supramolecular Assemblies: From Cyclic Oligomers to Linear Polymers

Employing bis(p‐sulfonatocalix[4]arenes) (bisSC4A) and N′,N′′hexamethylenebis(1‐methyl‐4,4′‐bipyridinium) (HBV⁴⁺) as monomer building blocks, the assembly morphologies can be modulated by cucurbit[n]uril (CB[n]) (n=7, 8), achieving the interesting topological conversion from cyclic oligomers to linear polymers. The binary supramolecular assembly fabricated by HBV⁴⁺ and bisSC4A units, forms an oligomeric structure, which was characterized by NMR spectroscopy, atomic force microscopy (AFM), transmission electron microscopy (TEM), dynamic light scattering (DLS), isothermal titration calorimetry (ITC), and gel permeation chromatography (GPC) experiments. The ternary supramolecular polymer participated by CB[8] is constructed on the basis of host–guest interactions by bisSC4A and the [2]pseudorotaxane HBV⁴⁺@CB[8], which is characterized by means of AFM, DLS, NMR spectroscopy, thermogravimetric analysis (TGA), UV/Vis spectroscopy, and elemental analysis. CB[n] plays vital roles in rigidifying the conformation of HBV⁴⁺, and reinforcing the host–guest inclusion of bisSC4A with HBV⁴⁺, which prompts the formation of a linear polymer. Moreover, the CB[8]‐participated ternary assembly could disassemble into the molecular loop HBV²⁺@CB[8] and free bisSC4A after reduction of HBV⁴⁺ to HBV²⁺, whereas the CB[7]‐based assembly remained unchanged after the reduction. CB[8] not only controlled the topological conversion of the supramolecular assemblies, but also improved the redox‐responsive assembly/disassembly property practically.     

Syntheses and self‐assembly of poly(benzyl ether)‐b‐poly(N‐isopropylacrylamide) dendritic–linear diblock copolymers

This article describes the syntheses and solution behavior of model amphiphilic dendritic–linear diblock copolymers that self‐assemble in aqueous solutions into micelles with thermoresponsive shells. The investigated materials are constructed of poly(benzyl ether) monodendrons of the second generation ([G‐2]) or third generation ([G‐3]) and linear poly(N‐isopropylacrylamide) (PNIPAM). [G‐2]‐PNIPAM and [G‐3]‐PNIPAM dendritic–linear diblock copolymers have been prepared by reversible addition–fragmentation transfer (RAFT) polymerizations of N‐isopropylacrylamide with a [G‐2]‐ or [G‐3]‐based RAFT agent, respectively. The critical micelle concentration (cmc) of [G‐3]‐PNIPAM₂₂₀, determined by surface tensiometry, is 6.3 × 10^?6 g/mL, whereas [G‐2]‐PNIPAM₂₃₅ has a cmc of 1.0 × 10^?5 g/mL. Transmission electron microscopy results indicate the presence of spherical micelles in aqueous solutions. The thermoresponsive conformational changes of PNIPAM chains located at the shell of the dendritic–linear diblock copolymer micelles have been thoroughly investigated with a combination of dynamic and static laser light scattering and excimer fluorescence. The thermoresponsive collapse of the PNIPAM shell is a two‐stage process; the first one occurs gradually in the temperature range of 20–29 °C, which is much lower than the lower critical solution temperature of linear PNIPAM homopolymer, followed by the second process, in which the main collapse of PNIPAM chains takes place in the narrow temperature range of 29–31 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1357–1371, 2006     

Mitochondria‐Targeting Oxidovanadium(IV) Complex as a Near‐IR Light Photocytotoxic Agent

Oxidovanadium(IV) complexes [VO(L¹)(phen)] ? Cl ( 1 ) and [VO(L²)(L³)] ? Cl ( 2 ), in which HL¹ is 2‐{[(benzimidazol‐2‐yl)methylimino]‐methyl}phenol (sal‐ambmz), HL² is 2‐[({1‐[(anthracen‐9‐yl)methyl]‐benzimidazol‐2‐yl}methylimino)‐methyl]phenol (sal‐an‐ambmz), phen is 1,10‐phenanthroline and L³ is dipyrido[3,2‐a:2′,3′‐c]phenazine (dppz) conjugated to a Gly‐Gly‐OMe dipeptide moiety, were prepared, characterized, and their DNA binding, photoinduced DNA‐cleavage, and photocytotoxic properties were studied. Fluorescence microscopy studies were performed by using complex 2 in HeLa and HaCaT cells. Complex 1 , structurally characterized by X‐ray crystallography, has a vanadyl group in VO₂N₄ core with the VO²⁺ moiety bonded to N,N‐donor phen and a N,N,O‐donor Schiff base. Complex 2 , having an anthracenyl fluorophore, showed fluorescence emission bands at 397, 419, and 443 nm. The complexes are redox‐active exhibiting the V(IV)/V(III) redox couple near ?0.85 V versus SCE in DMF 0.1 M tetrabutylammonium perchlorate (TBAP). Complex 2 , having a dipeptide moiety, showed specific binding towards poly(dAdT)₂ sequence. The dppz‐Gly‐Gly‐OMe complex showed significant DNA photocleavage activity in red light of 705 nm through a hydroxyl radical (^.OH) pathway. Complex 2 showed photocytotoxicity in HaCaT and HeLa cells in visible light (400–700 nm) and red light (620–700 nm), however, the complex was less toxic in the dark. Fluorescence microscopy revealed the localization of complex 2 primarily in mitochondria. Apoptosis was found to occur inside mitochondria (intrinsic pathway) caused by ROS generation.     

An Ideal Detector Composed of Two‐Dimensional Cd(II)–Triazole Frameworks for Nitro‐Compound Explosives and Potassium Dichromate

The two‐dimensional (2D) metal–organic framework (MOF) [Cd(TPTZ)(H₂O)₂(HCOOH)(IPA)₂]_n ( 1 ; TPTZ={4‐[4‐(1H‐1,2,4‐triazol‐1‐yl)phenyl]phenyl}‐1H‐1,2,4‐triazole, IPA=isophthalic acid) has been constructed with the π‐electron‐rich aromatic ligand TPTZ, auxiliary ligand IPA, and the metal Cd²⁺ ion with a d¹⁰ configuration under solvothermal conditions. Complex 1 exhibits a strong ligand‐originated photoluminescence emission, which is selectively sensitive toward electron‐deficient nitroaromatic compounds, such as nitrobenzene (NB), 1,3‐dinitrobenzene (m‐DNB), and 1,4‐dinitrobenzene (p‐DNB), and nitro‐aliphatic compounds, such as nitromethane (NM) and tris(hydroxymethyl)nitromethane. This property makes complex 1 a potential fluorescence sensor for these chemicals. Single‐crystal X‐ray diffraction studies revealed that dinuclear cadmium building units were further bridged by TPTZ ligands to give a four‐connected uninodal net with the Schläfli symbol of [4.6₃.4.6₃.6₂.6₄].     

Synthesis,characterization and application of 3‐methyl‐1‐sulfonic acid imidazolium tetrachloroferrate as nanostructured catalyst for the tandem reaction of β‐naphthol with aromatic aldehydes and amide derivatives

3‐methyl‐1‐sulfonic acid imidazolium tetrachloroferrate {[Msim]FeCl₄} was prepared and fully characterized by fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), thermal gravimetric analysis (TGA), differential thermal gravimetric (DTG), field emission scanning electron microscopy (FESEM), energy dispersive X‐ray analysis (EDX) and vibrating sample magnetometer (VSM) and used, as an efficient catalyst, for the tandem reaction of β‐naphthol with aromatic aldehydes and benzamide at 110 °C under solvent‐free conditions to give 1‐amidoalkyl‐2‐naphthols in high yields and very short reaction times.     

Synthesis and structural characterizations of [chromophore]+‐saponite/polyurethane nanocomposites

In this study, three chromophores—p‐nitroaniline, 4‐(4‐nitrophenylazo)aniline, and 4‐[(E)‐2‐{4‐[(E)‐2‐(4‐nitrophenyl)‐1‐diazenyl]phenyl}‐1‐diazenyl]aniline—were intercalated into layered aluminosilicate saponite and then dispersed into the polyurethanes matrix. The intercalated chromophore/saponite complexes were examined by inductively coupled plasma emission and element analysis technologies. The molecular orbital package computation simulation and X‐ray diffraction (XRD) analysis showed that possible configurations of chromophore ions on the gallery surfaces of saponite suggest that the chromophore molecules lie parallel to the basal planes of silicate as an inclined paraffin structure or as pseudo‐multilayers. The XRD and transmission electron microscopy analysis indicated that the delamination of organoclay in the polyurethanes matrix exhibited nanolayers, exfoliated structure, or both. In particular, even at high doping levels up to 15 wt % of organoclay, the [chromophore]⁺‐saponite/polyurethanes film did not display a macroscopic aggregation of layered silicates and showed high transparency. The thermal stability of chromophore was significantly enhanced as intercalated into the layered aluminosilicate saponite, and the glass‐transition temperature of [chromophore]⁺‐saponite/polyurethanes nanocomposites proportionally increased with increased clay content. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1690–1703, 2002     

Consequences of the One‐Electron Reduction and Photoexcitation of Unsymmetric Bis‐imidazolium Salts

Coupling of uronium salts with in situ generated N‐heterocyclic carbenes provides straightforward access to symmetrical [ 4 ]²⁺ and unsymmetrical bis‐imidazolium salts [ 6 ]²⁺ and [ 9 ]²⁺. As indicated by cyclic and square‐wave voltammetry, [ 6 ]²⁺ and [ 9 ]²⁺ can be (irreversibly) reduced by one electron. The initially formed radicals [ 6 ]^.+ and [ 9 ]^.+ undergo further reactions, which were probed by EPR spectroscopy and density functional calculations. The final products of the two‐electron reduction are the two carbenes. Upon irradiation with UV light both [ 6 ]²⁺ and [ 9 ]²⁺ emit at room temperature in solution but with dramatically different characteristics. The different fluorescence behavior is analyzed by emission spectroscopy and interpreted by using time‐dependent density functional calculations as largely due to different excited‐state dynamics of [ 6 ]²⁺ and [ 9 ]²⁺. The geometries of both radicals [ 6 ]^.+ and [ 9 ]^.+ and excited states {[ 6 ]²⁺} * and {[ 9 ]²⁺}* are substantially different from those of the parent ground‐state molecules.