Formation of an in situ nanosilica nanomatrix via graft copolymerization of vinyltriethoxysilane onto natural rubber

Natural rubber (NR) with an in situ nanosilica nanomatrix was characterized in present work. The in situ nanosilica nanomatrix was prepared via graft copolymerization of a silane monomer, vinyltriethoxysilane (VTES), onto deproteinized NR (DPNR) in latex stage using tetrapentamine (TEPA)/tert‐butylhydroperoxide (TBHPO) as initiators. VTES conversion of more than 80% was obtained, and it depended on VTES concentration. The graft copolymer structure was characterized by Fourier transform infrared (FT‐IR), solution‐state proton nuclear magnetic resonance (¹H‐NMR), and solid‐state ²⁹Si‐NMR spectroscopy. FT‐IR analysis of the graft copolymer confirmed the formation of in situ silica particles, while solution‐state ¹H‐NMR and solid‐state ²⁹Si‐NMR revealed the partial hydrolysis of the ethoxy groups and polycondensation of the silanol groups. The formation of nanosilica particles enhanced thermal and mechanical properties of the graft copolymer. Morphology observations of the in situ nanosilica nanomatrix through scanning electron microscopy (SEM) and transmission electron microscopy (TEM) indicated that the spherical nanosilica particles form a nanomatrix surrounding NR particle. The formation of the nanomatrix was proved to enhance mechanical properties for NR materials.     

Mechanism of graft copolymerization of styrene onto deproteinized natural rubber

High conversion and high grafting efficiency attained by graft copolymerization of styrene onto deproteinized natural rubber (DPNR) was investigated with respect to the molecular weight of grafted polystyrene. The graft copolymerization was performed with tert-butyl hydroperoxide/tetraethylenepentamine as an initiator after deproteinization of natural rubber with urea. Grafted polystyrene was isolated from the resulting graft copolymer by ozonolysis reaction. After the ozonolysis of the graft copolymer of DPNR and polystyrene (DPNR-g-PS), the molecular weight of grafted polystyrene was determined by size exclusion chromatography. Effects of initiator and monomer concentrations were investigated with respect to the molecular weight of the grafted polystyrene, which was found to depend on not only the number of active site generated on the rubber particle but also the feed of styrene. Deactivation and chain transfer of the active sites were attributed to effective amount of styrene used for the graft copolymerization.     

Morphology and properties of natural rubber with nanomatrix of non‐rubber components

The morphology of natural rubber was observed by transmission electron microscopy. Nanomatrix of non‐rubber components such as proteins and phospholipids was found to be inherently formed in natural rubber, in which natural rubber particles of about 0.5 µm in average diameter were dispersed. The nanomatrix of non‐rubber components disappeared after deproteinization of natural rubber with urea. Stress at break of serum rubber was higher than that of deproteinized natural rubber, while strain at break did not change. When the amount of the non‐rubber components increased, the stress at break became significantly dependent upon the amount of non‐rubber components. Viscoelastic properties of natural rubber were also dependent upon the nanomatrix of non‐rubber components. Storage modulus of natural rubber increased significantly, when the amount of the non‐rubber components increased. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of non‐rubber components on the mechanical properties of natural rubber

Effect of the nanomatrix structure on mechanical properties of natural rubber was investigated in relation to the strain‐induced crystallization. Structure of natural rubber was analyzed through Fourier transform infrared spectroscopy, wide‐angle X‐ray diffraction measurement and transmission electron microscopy. The nanomatrix of the non‐rubber components was found to be inevitably formed in natural rubber, in which natural rubber particles linking to fatty acids were dispersed in the nanomatrix of the proteins and phospholipids. The nanomatrix disappeared after deproteinization of natural rubber with urea. Tensile strength and modulus of natural rubber were reduced by removal of the fatty acids and the proteins, which resulted in disappearance of the nanomatrix structure. The effect of fatty acids on the crystallization of natural rubber in small particles as a dispersoid was proved by tensile test of blend of natural rubber and styrene butadiene rubber. Copyright © 2016 John Wiley & Sons, Ltd.     

Photoreactive nanomatrix structure formed by graft‐copolymerization of 1,9‐nonandiol dimethacrylate onto natural rubber

Formation of photoreactive nanomatrix structure was investigated by graft‐copolymerization of an inclusion complex of 1,9‐nonandiol dimethacrylate (NDMA) with β‐cyclodextrin (β‐CD) onto natural rubber particle using potassium persulfate (KPS), tert‐butyl hydroperoxide/tetraethylenepentamine (TBHPO/TEPA), cumene hydroperoxide/tetraethylenepentamine (CHPO/TEPA), and benzoyl peroxide (BPO) as an initiator. The graft copolymer was characterized by ¹H NMR and FTIR after coagulation. The conversion of NDMA and the amount of residual methacryloyl group were found to be 58.5 w/w % and 1.81 w/w %, respectively, under the suitable condition of the graft‐copolymerization. The morphology of the film specimen, prepared from the graft copolymer, was observed by transmission electron microscopy (TEM) after staining the film with OsO₄. Natural rubber particle of about 1.0 μm in diameter was dispersed in poly(NDMA) matrix of about 10 nm in thickness. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2418–2424, 2010     

Upper critical solution temperature type phase behavior of poly(styrene‐co‐acrylonitrile) blends with poly(styrene‐co‐n‐phenyl maleimide) and their interaction energies

To enhance the heat resistance of poly(styrene‐co‐acrylonitrile‐co‐butadiene), ABS, miscibility of poly(styrene‐co‐acrylonitrile), SAN, with poly(styrene‐co‐n‐phenyl maleimide), SNPMI, having a higher glass transition temperature than SAN was explored. SAN/SNPMI blends casted from solvent were immiscible regardless of copolymer compositions. However, SNPMI copolymer forms homogeneous mixtures with SAN copolymer within specific ranges of copolymer composition upon heating caused by upper critical solution temperature, UCST, type phase behavior. Since immiscibility of solvent casting samples can be driven by solvent effects even though SAN/SNPMI blends are miscible, UCST‐type phase behavior was confirmed by exploring phase reversibility. When copolymer composition of SNPMI was fixed, the phase homogenization temperature of SAN/SNPMI blends was increased as AN content in SAN copolymer increased. To understand the observed phase behavior of SAN/SNPMI blend, interaction energies of blends were calculated from the UCST‐type phase boundaries by using the lattice‐fluid theory combined with a binary interaction model. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1131–1139, 2008     

Preparation and characterization of natural rubber with soft nanomatrix structure

Preparation of natural rubber (NR) with a soft nanomatrix structure was made by graft-copolymerization of butyl acrylate (BA) onto deproteinized natural rubber with tert-butyl hydroperoxide/tetraetylenepentamine in latex stage. The resulting graft-copolymer of deproteinized natural rubber and poly (butyl acrylate) (DPNR-graft-PBA) was characterized by Fourier-transform infrared spectroscopy. Conversion and grafting efficiency of BA were dependent upon BA concentration, which were more than 90?mol% under a suitable condition of the graft-copolymerization. Morphology of DPNR-graft-PBA was observed by transmission electron microscopy after staining film specimens with I₂ vapor for 5?min. The NR particles of about 0.5?μm in diameter were dispersed in PBA matrix of about 15?nm in thickness. Storage modulus and loss tangent of DPNR-graft-PBA were measured, and they were related with the soft nanomatrix structure. The tensile strength and elongation at break decreased as monomer concentration increased.     

Photoreactive particle prepared from natural rubber and 1,9‐nonandioldimethacrylate

Photoreactive particle was prepared by graft copolymerization of 1,9‐nonandioldimethacrylate (NDMA) onto deproteinized natural rubber (DPNR) particles in latex stage. First, NDMA was mixed with α‐cyclodextrin (α‐CD) as a coupling agent to form an inclusion complex to stabilize a carbon–carbon double bond of NDMA as a bifunctional monomer. Second, the inclusion complex was graft‐copolymerized onto natural rubber (NR) in latex stage with potassium persulfate (KPS) as an initiator, after deproteinization with urea in the presence of surfactant. A terminal vinyl group of NDMA was used for the graft copolymerization, while the other remained in the resulting polymer, due to the coupling effect of the α‐CD. The products, after washing α‐CD out, were characterized by FTIR, X‐ray diffraction (XRD), ¹H NMR and solid‐state ¹³C NMR measurements. The amount of residual carbon–carbon double bond after graft copolymerization was investigated in relation to the amount of rubber and reaction temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4111–4118, 2009     

Bimodal molecular weight distribution of poly(styrene‐co‐acrylonitrile) formed by conventional free‐radical copolymerization of acrylonitrile and styrene in room temperature ionic liquids

Conventional free‐radical copolymerization of acrylonitrile (AN) and styrene (St) was realized in room temperature ionic liquids (RTILs), 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([Bmim][BF₄]) and 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([Bmim][PF₆]), under mild conditions. The copolymerization in RTILs was more rapid than that in traditional solvent DMF. Poly(styrene‐co‐acrylonitrile) (SAN) prepared in RTILs had higher molecular weight than that prepared in DMF or by bulk copolymerization. SAN with bimodal molecular weight distribution (MWD) were obtained in most of the reaction conditions in [Bmim][BF₄] and some conditions in [Bmim][PF₆]. By the analysis of reaction phenomena and fluorescence behavior, the reason of the difference in MWD could be attributed to the difference of reaction system compatibility mainly caused by the immiscibility of macromolecule with RTIL. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4420–4427, 2006     

Co‐continuous Polyamide 6 (PA6)/Acrylonitrile‐Butadiene‐Styrene (ABS) Nanocomposites

Summary: Polyamide 6 (PA6)/acrylonitrile‐butadiene‐styrene (ABS) (40/60 w/w) nanocomposites with a novel morphology were prepared by the melt mixing of PA6, ABS and organoclay. The blend nanocomposites had a co‐continuous structure, in which both PA6 and styrene‐acrylonitrile (SAN) were continuous phases. It was found that the toughening rubber particles were only located in the SAN phase and the strengthening clay platelets were selectively dispersed in the PA6 phase. The co‐continuous nanocomposites showed greatly improved mechanical properties over the whole temperature range when compared with the same blend sample without clay.

Schematic diagram for the co‐continuous ABS/PA6 blend nanocomposite.     

Synthesis of styrene‐g‐polyisoprene nanoparticles by emulsion polymerization and its effect on properties of polyisoprene composites

The graft copolymerization of styrene onto nanosized polyisoprene (PIP) was carried out by using cumene hydroperoxide and tetraethylene pentamine as redox initiators. The high conversion and high degree of grafting could be achieved when a small particle was used as the core polymer. The grafting efficiency and monomer conversion increased with increasing reaction temperature and monomer concentration. Transmission electron microscopy indicated that the small PIP nanoparticles were completely coated with polystyrene (PS) by grafting resulting in a core shell morphology of nanosized graft PIP. Nanosized PIP and nanosized PS‐g‐PIP could be used as compatibilizers for vulcanized rubber latex. The addition of nanosized PIP and PS‐g‐PIP strongly influenced the mechanical properties of the natural rubber (NR)‐based compound. Incorporation of nanosized PIP and PS‐g‐PIP resulted in an improvement of the resistance of the compounds to heat aging. Copyright © 2011 John Wiley & Sons, Ltd.     

Microphase separation in poly(acrylonitrile–butadiene–styrene) (ABS) studied with paramagnetic spin probes. I. Electron spin resonance spectra

Microphase separation in poly(acrylonitrile–butadiene–styrene) (ABS) was studied as a function of the butadiene content and method of preparation with electron spin resonance (ESR) spectra of nitroxide spin probes. Results for the ABS polymers were evaluated by comparison with similar studies of the homopolymers polybutadiene (PB), polystyrene (PS), and polyacrylonitrile (PAN) and the copolymers poly(styrene‐co‐acrylonitrile) (SAN) and poly(styrene‐co‐butadiene) (SB). Two spin probes were selected for this study: 10‐doxylnonadecane (10DND) and 5‐doxyldecane (5DD). The probes varied in size and were selected because their hydrocarbon backbone made them compatible with the polymers studied. The ESR spectra were measured in the temperature range 120–420 K and were analyzed in terms of line shapes, line widths, and hyperfine splitting from the ¹⁴N nucleus; the appearance of more than one spectral component was taken as an indication of microphase separation. Only one spectral component was detected for 10DND in PB, PS, and PAN and in the copolymers SAN and SB. In contrast, two spectral components differing in their dynamic properties were detected for both probes in the three types of ABS samples studied and were assigned to spin probes located in butadiene‐rich domains (the fast component) and SAN‐rich domains (the slow component). The behavior of the fast component in ABS prepared by mass polymerization suggested that the low‐T_g (glass‐transition‐temperature) phase was almost pure PB. The corresponding phase in ABS prepared by emulsion grafting also contained styrene and acrylonitrile monomers. A redistribution of the spin probes on heating occurred with heating near the T_g of the SAN phase, suggesting that the ABS polymers as prepared were not in thermodynamic equilibrium. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 415–423, 2002; DOI 10.1002/polb.10109     

Reactivity of functional SAN toward coreactive EPR‐g‐MA at planar interface

The grafting kinetics of reactive poly(styrene‐co‐acrylonitrile) (SAN) onto EPR‐g‐MA was studied under isothermal conditions, at the planar interface of an SAN/ethylene‐propylene rubber (EPR) bilayer film in relation to the type of reactive groups, NH₂ versus carbamate (which is an amine precursor), attached to SAN. The amount of SAN chemically bound to EPR chains at the interface was estimated by selectively washing off the unreacted SAN chains before X‐ray photon spectroscopic analysis of the released surface. It is clear that the mutual reactivity of the reactive groups, i.e., the NH₂–MA pair versus the carbamate–MA pair, has a decisive effect on the amount of SAN that reacts with EPR‐g‐MA at the interface. In case of SAN‐carb, the grafting reaction is controlled by the thermolysis of the carbamate groups into primary amines. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3682–3689, 2000     

Evaluation of the interaction parameter for poly(ε‐caprolactone)/poly(styrene‐co‐acrylonitrile) blends

In this article, the miscibility of poly(ε‐caprolactone) (PCL) with poly(styrene‐co‐acrylonitrile) (SAN) containing 25 wt % of acrylonitrile is studied from both a qualitative and a quantitative point of view. The evidences coming from thermal analysis (differential scanning calorimetry) demonstrate that PCL and SAN are miscible in the whole range of composition. The Flory interaction parameter χ_1,2 was calculated by the Patterson approximation and the melting point depression of the crystalline phase in the blends; in both cases, negative values of χ_1,2 were found, confirming that the system is miscible. The interaction parameter evaluated within the framework of the mean field theory demonstrates that the miscibility of PCL/SAN blends is due to the repulsive interaction between the styrene and acrylonitrile segments in SAN. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Nanoindentation of biodegradable cellulose diacetate‐graft‐poly(L‐lactide) copolymers: Effect of molecular composition and thermal aging on mechanical properties

Nanoindentation of cellulose diacetate‐graft‐poly(lactide)s (CDA‐g‐PLLAs) synthesized by ring opening graft copolymerization of L ‐lactide in bulk onto the residual hydroxyl positions on CDA were conducted to investigate the effect of the molecular composition and thermal aging on mechanical properties and creep behavior. Continuous stiffness measurement (CSM) technique was used to obtained hardness and elastic modulus. These material properties were expressed as a mean value from 100 to 300 nm depths and an unloading value at final indentation depth. The hardness and elastic modulus in all CDA‐g‐PLLAs were higher than those in pure CDA, indicating that the introduction of PLLA increases the hardness and elastic modulus. With an increase of crystallinity by thermal aging, the hardness and elastic modulus were increased in both CDA‐g‐PLLA and PLLA. The creep test performed by CSM showed that the creep strain of CDA was decreased by the grafting of PLLA. Thermal aging decreased the creep strain of CDA‐g‐PLLA and PLLA. With an increase of holding time, hardness was decreased, whereas elastic modulus was kept almost constant. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1114–1121, 2007     

Preparation of phenyl‐modified natural rubber in latex stage

Phenyl‐modified natural rubber was prepared in latex stage by bromination of deproteinized natural rubber followed by Suzuki‐Miyaura cross‐coupling reaction. First, the bromination of natural rubber was carried out using N‐bromosuccinimide in latex stage. The bromine atom content increased as amount of N‐bromosuccinimide increased. Second, the allylic bromine atom was replaced with a phenyl group using phenyl boronic acid in the presence of a palladium catalyst, according to the Suzuki‐Miyaura cross‐coupling reaction in latex stage. The resulting products were characterized by nuclear magnetic resonance (NMR) spectroscopy. Signal at 7.13 ppm was assigned to the phenyl group of the product, while signals at 3.98, 4.14, and 4.44 ppm were assigned to the remaining allylic brominated cis‐1,4‐isoprene units. The estimated phenyl group content and the conversion of the Suzuki‐Miyaura cross‐coupling reaction were 1.32 and 23.7 mol%, respectively. Glass transition temperature (T_g) of deproteinized natural rubber increased from ?62°C to ?46.7°C, when the phenyl group was introduced into the rubber.     

Kinetics and mechanism of grafting of undecylenic acid onto acrylonitrile–butadiene–styrene terpolymer

The graft copolymerization of undecylenic acid onto acrylonitrile–butadiene–styrene terpolymer (ABS) was initiated with benzoyl peroxide (BPO) in a 1,2‐dichloroethane solution. IR spectra confirmed that undecylenic acid was successfully grafted onto the ABS backbone. The influence of the concentrations of undecylenic acid, BPO, and ABS on the graft copolymerization was studied. A reaction mechanism was proposed: the grafting most likely took place through the addition of poly(undecylenic acid) radicals to the double bond of the butadiene region of ABS. A monomer cage effect on the graft reaction was observed to depend on the 1.5 power of the monomer concentration from the experimental results of the initial rate of graft copolymerization. The initial rate of graft copolymerization was written as R_p = 1.77 × 10⁻³[P][I₂][M]^2.5/([P]+2.75[M]^2.5)². © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 486–494, 2001     

XPS studies of Ni deposition on polymethyl methacrylate and poly(styrene‐co‐acrylonitrile)

Thin Ni layers were deposited onto clean polymethyl methacrylate (PMMA) and poly(styrene‐co‐acrylonitrile) (SAN) surfaces by a high vacuum thermal evaporation process. The resulting interfaces were studied by X‐ray photoelectron spectroscopy. The Ni deposition on PMMA changes the relative intensity of the C1s spectra associated with the O CO and C O carbon species, and modifies the shape of the O1s peak, while the Ni evaporation on SAN alters the C1s band intensity assigned to the CN moiety and gives a second N1s band at low binding energies. These observations suggest the formation of new chemical species at the interface between Ni and the PMMA ester group, and between Ni and the SAN nitrile group, which are the most reactive sites on these two polymers. Copyright © 2000 John Wiley & Sons, Ltd.     

Synthesis of poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyl groups and its further initiation of the grafting polymerization of styrene

A new stratagem for the synthesis of amphiphilic graft copolymers of hydrophilic poly(ethylene oxide) as the main chain and hydrophobic polystyrene as the side chains is suggested. A poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyls [poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide)] was first prepared by the anionic ring‐opening copolymerization of ethylene oxide and 4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl, and then the graft copolymerization of styrene was completed with benzoyl peroxide as the initiator in the presence of poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide). The polymerization of styrene was under control, and comblike, amphiphilic poly(ethylene oxide)‐g‐polystyrene was obtained. The copolymer and its intermediates were characterized with size exclusion chromatography, ¹H NMR, and electron spin resonance in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3836–3842, 2006     

Highly branched polyethylene graft copolymers prepared by means of migratory insertion polymerization combined with TEMPO‐mediated controlled radical polymerization

New families of highly branched polyethylenes containing alkyl short chain branches as well as polar and non‐polar long‐chain branches were prepared by combining migratory insertion copolymerization with controlled radical graft copolymerization. Key intermediate was a novel alkoxyamine‐functionalized 1‐alkene which was copolymerized with ethylene using a palladium catalyst. The resulting highly branched polyethylene with alkoxyamine‐functionalized short chain branches was used as macroinitiator to initiate controlled radical graft copolymerization of styrene and styrene/acrylonitrile. Novel polyethylene graft copolymers with molecular masses of M_w >100 000 g/mol and narrow polydispersities were obtained. Transmission electron microscopic studies (TEM) and the presence of two glass transition temperatures at –67 and +100°C indicated microphase separation.