Producing bimodal molecular weight distribution polymers through facile one‐pot/one‐step RAFT polymerization

Well‐defined bimodal molecular weight distribution (MWD) polystyrene and polystyrene‐b‐poly(acrylonitrile) were successfully synthesized using a pair of mono/difunctional trithiocarbonate RAFT agents 1 and 2 via one‐pot RAFT polymerization. The kinetics of RAFT polymerization for styrene in bulk with a molar ratio of [St]₀:[AIBN]₀:[ 1 ]₀:[ 2 ]₀ = 1200:1:2.5:2.5 was studied at 75°C. The results indicated that the system showed excellent controllability and “living” characteristics to both higher and lower molecular weight fractions, providing an efficient and facile way to producing bimodal MWD (co)polymers with both controlled molecular weight (MW) and MWD in molecular level, and the plausible mechanism was discussed in this work. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Dendrimer‐star polymer and block copolymer prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization with dendritic chain transfer agent

A new reversible addition‐fragmentation chain transfer (RAFT) agent, dendritic polyester with 16 dithiobenzoate terminal groups, was prepared and used in the RAFT polymerization of styrene (St) to produce star polystyrene (PSt) with a dendrimer core. It was found that this polymerization was of living characters, the molecular weight of the dendrimer‐star polymers could be controlled and the polydispersities were narrow. The dendrimer‐star block copolymers of St and methyl acrylate (MA) were also prepared by the successive RAFT polymerization using the dendrimer‐star PSt as macro chain transfer agent. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6379–6393, 2005     

One‐step synthesis of block copolymers using a hydroxyl‐functionalized trithiocarbonate RAFT agent as a dual initiator for RAFT polymerization and ROP

A range of well‐defined block copolymers were synthesized using 4‐cyano‐4‐(dodecylsulfanylthiocarbonyl)sulfanylpentanol (CDP) as a dual initiator for reversible addition‐fragmentation chain transfer (RAFT) polymerization and ring‐opening polymerization (ROP) in a one‐step process. Styrene, (meth)acrylate, and acrylamide monomers were polymerized in a controlled manner for one block composed of vinyl monomers, and δ‐valerolactone (VL), ε‐caprolactone (CL), trimethylene carbonate (TMC), and L ‐lactide (LA) were used for the other block composed of cyclic monomers. Diphenyl phosphate was used as a catalyst for the ROP of VL, CL, and TMC, and 4‐dimethyamino pyridine for the ROP of LA. These catalysts did not interfere with RAFT polymerization and the synthesis of various block copolymers proceeded in a controlled manner. CDP was found to be a very useful dual initiator for a one‐step synthesis of various block copolymers by a combination of RAFT polymerization and ROP. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Pore size in one‐step swelling and polymerization of monodisperse polymer beads

Crosslinked polystyrene beads were prepared at low swelling ratios by one‐step swelling and polymerization method. Pore size of the beads was observed based on the GPC calibration curves. It is found that: (1) the pore size increases as the swelling ratio decreases; (2) when a good solvent is used as the porogen the pore size increases with the crosslinking monomer content; and (3) at high crosslinking monomer content the pore size does not depend on the porogen solubility. The effects are discussed in terms of polymer miscibility, including phase separation between the seed and bead polymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3270–3277, 2000     

One‐step synthesis of block‐graft copolymers via simultaneous reversible‐addition fragmentation chain transfer and ring‐opening polymerization using a novel macroinitiator

One‐step synthesis of block‐graft copolymers by reversible addition‐fragmentation chain transfer (RAFT) and ring‐opening polymerization (ROP) by using a novel initiator was reported. Block‐graft copolymers were synthesized in one‐step by simultaneous RAFT polymerization of n‐butylmethacrylate (nBMA) and ROP of ε‐caprolacton (CL) in the presence of a novel macroinitiator (RAFT‐ROP agent). For this purpose, first epichlorohydrin (EPCH) was polymerized by using H₂SO₄ via cationic ring‐opening mechanism. And then a novel RAFT‐ROP agent was synthesized by the reaction of potassium ethyl xanthogenate and polyepichlorohydrin (poly‐EPCH). By using the RAFT‐ROP agent, poly[CL‐b‐EPCH‐b‐CL‐(g‐nBMA)] block‐graft copolymers were synthesized. The principal parameters such as monomer concentration, initiator concentration, and polymerization time that affect the one‐step polymerization reaction were evaluated. The block lengths of the block‐graft copolymers were calculated by using ¹H‐nuclear magnetic resonance (¹H NMR) spectrum. The block length could be adjusted by varying the monomer and initiator concentrations. The characterization of the products was achieved using ¹H NMR, Fourier‐transform infrared spectroscopy, gel‐permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, elemental analysis, and fractional precipitation (γ) techniques. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2651–2659     

Influence of n‐dodecyl mercaptan as chain transfer agent in dispersion polymerization of styrene

Dispersion polymerization of styrene with n‐dodecyl mercaptans (DDM) as the chain transfer agent was investigated. PS particles with various molecular weight, molecular weight distribution (MWD), and particle diameter were prepared by varying the concentration of DDM and also the addition time of DDM before and after the particle nucleation. The average particle diameter was increased, whereas polymerization rate, molecular weight, and MWD were decreased with increasing DDM concentrations from 0 to 10 wt %. The effect of addition of DDM before and after particle nucleation was studied at 0.4, 0.8, and 1.0 wt % DDM. The addition of DDM before particle nucleation produced PS particles of relatively large particle diameter and low molecular weight when compared with the addition of DDM after particle nucleation. This study shows that particle nucleation occurs in about 5–6 min, which corresponds to the 15–16% conversion, 372–378 nm in D_n , and provides a facile way to control the particle size and interesting information about the particle formation using the delayed addition of DDM. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6612–6620, 2008     

Simultaneous reversible addition fragmentation chain transfer and ring‐opening polymerization

The simultaneous ring‐opening polymerization (ROP) of ε‐caprolactone (ε‐CL) and 2‐hydroxyethyl methacrylate (HEMA) polymerization via reversible addition fragmentation chain transfer (RAFT) chemistry and the possible access to graft copolymers with degradable and nondegradable segments is investigated. HEMA and ε‐CL are reacted in the presence of cyanoisopropyl dithiobenzoate (CPDB) and tin(II) 2‐ethylhexanoate (Sn(Oct)₂) under typical ROP conditions (T > 100 °C) using toluene as the solvent in order to lead to the graft copolymer PHEMA‐g‐PCL. Graft copolymer formation is evidenced by a combination of size‐exclusion chromatography (SEC) and NMR analyses as well as confirmed by the hydrolysis of the PCL segments of the copolymer. With targeted copolymers containing at least 10% weight of PHEMA and relatively small PHEMA backbones (ca. 5,000–10,000 g mol^?1) the copolymer grafting density is higher than 90%. The ratio of free HEMA‐PCL homopolymer produced during the “one‐step” process was found to depend on the HEMA concentration, as well as the half‐life time of the radical initiator used. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3058–3067, 2008     

Chemical cross‐linking with a diazirine photoactivatable cross‐linker investigated by MALDI‐ and ESI‐MS/MS

Crystallography and nuclear magnetic resonance are well‐established methods to study protein tertiary structure and interactions. Despite their usefulness, such methods are not applicable to many protein systems. Chemical cross‐linking of proteins coupled with mass spectrometry allows low‐resolution characterization of proteins and protein complexes based on measuring distance constraints from cross‐links. In this work, we have investigated cross‐linking by means of a heterobifunctional cross‐linker containing a traditional N‐hydroxysuccinimide (NHS) ester and a UV photoactivatable diazirine group. Activation of the diazirine group yields a highly reactive carbene species, with potential to increase the number of cross‐links compared with homobifunctional, NHS‐based cross‐linkers. Cross‐linking reactions were performed on model systems such as synthetic peptides and equine myoglobin. After reduction of the disulfide bond, the formation of intra‐ and intermolecular cross‐links was identified and the peptides modified with both NHS and diazirine moieties characterized. Fragmentation of these modified peptides reveals the presence of a marker ion for intramolecular cross‐links, which facilitates identification. Copyright © 2010 John Wiley & Sons, Ltd.     

Nanofiltration membrane cross‐linked by m‐phenylenediamine for dye removal from textile wastewater

In this work, m‐phenylenediamine (MPD) is used to prepare cross‐linked polyetherimide (PEI)‐based nanofiltration (NF) membrane for treatment of dye containing wastewater. The effects of dope solution composition, cross‐linking time, and dye concentration on membrane performance are investigated. Results indicate that the rejection of dye is increased with the increase of acetone concentration in the dope solution, cross‐linking time, and dye concentration. Meanwhile, membrane flux showed the opposite trend. With the aid of SEM and FTIR analysis, the cross‐linking between MPD and PEI is confirmed. The cross‐linked membrane has thicker and dense selective layer compared to the unmodified membrane. The cross‐linked NF membrane (PEI: 15 wt%; acetone: 20 wt%; cross‐linking time: 10 minutes) showed good performance in filtration of synthetic dye wastewater (Reactive Red 120, 1500 ppm) with 98% dye rejection and 0.013 L m^?2 hour^?1 of flux at relatively low operating pressure (60 psi).     

Molecular modification of slightly cross‐linked HDPE: comparison of electron beam irradiation and peroxide treatments

The aim of this study is to investigate the changes in molecular structure of high density polyethylene after slightly cross‐linking with either electron beam irradiation or chemically with the peroxide method, by examining both the gel and sol parts of the polymer. Melt flow index and dynamic mechanical thermal analysis tests verify the cross‐linking process after each treatment method. Differential scanning calorimetry and Fourier transformed infrared tests, together with rheology and viscometry tests, show that the cross‐linking process has resulted in not only cross‐linking long chains but also chain scission of short chains, thus broadening the molecular weight distribution. Because these created short chains act like lubricants, cross‐linked chains flow easier. Therefore, the polymer remains processable according to the melt flow index test, and this will make the usage of slightly cross‐linked high density polyethylene in injection molding processes possible. Copyright © 2016 John Wiley & Sons, Ltd.     

Design,synthesis, and characterization of a combined main‐chain/side‐chain liquid crystalline polymer based on mesogen‐jacketed liquid crystal polymer via atom transfer radical polymerization

A novel combined main‐chain/side‐chain liquid crystalline polymer based on mesogen‐jacketed liquid crystal polymers (MJLCPs) containing two biphenyls per mesogenic core of MJLCPs main chain, poly(2,5‐bis{[6‐(4‐butoxy‐4′‐oxy‐biphenyl)hexyl]oxycarbonyl}styrene) (P1–P8) was successfully synthesized via atom transfer radical polymerization (ATRP). The chemical structure of the monomer was confirmed by elemental analysis, ¹H NMR, and ¹³C NMR. The molecular characterizations of the polymer with different molecular weights (P1–P8) were performed with ¹H NMR, gel permeation chromatography (GPC), and thermogravimetric analysis (TGA). Their phase transitions and liquid‐crystalline behaviors of the polymers were investigated by differential scanning calorimetry (DSC) and polarized optical microscope (POM). We found that the polymers P1–P8 exhibited similar behavior with three different liquid crystalline phases upon heating to or cooling in addition to isotropic state, which should be related to the complex liquid crystal property of the side‐chain and the main‐chain. Moreover, the transition temperatures of liquid crystalline phases of P1–P8 are found to be dependent on the molecular weight. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7310–7320, 2008     

Preparation of a novel polymer monolith with functional polymer brushes by two‐step atom‐transfer radical polymerization for trypsin immobilization

Novel porous polymer monoliths grafted with poly{oligo[(ethylene glycol) methacrylate]‐co‐glycidyl methacrylate} brushes were fabricated via two‐step atom‐transfer radical polymerization and used as a trypsin‐based reactor in a continuous flow system. This is the first time that atom‐transfer radical polymerization technique was utilized to design and construct polymer monolith bioreactor. The prepared monoliths possessed excellent permeability, providing fast mass transfer for enzymatic reaction. More importantly, surface properties, which were modulated via surface‐initiated atom‐transfer radical polymerization, were found to have a great effect on bioreactor activities based on Michaelis–Menten studies. Furthermore, three model proteins were digested by the monolith bioreactor to a larger degree within dramatically reduced time (50 s), about 900 times faster than that by free trypsin (12 h). The proposed method provided a platform to prepare porous monoliths with desired surface properties for immobilizing various enzymes.     

Wet 3‐D printing of epoxy cross‐linked chitosan/carbon microtube composite

Over the last decays, the use of conductive biopolymer composites has been growing in areas such as biosensors, soft robotics, and wound dressing applications. They are generally soft hydrophilic materials with good elastic recovery and compatible with biological environments. However, their application and removal from the host are still challenging mainly due to poor mechanical strength. This work displays a technique for the fabrication of complex‐shaped conductive structures with improved mechanical strength by wet three‐dimensional (3‐D) printing, which uses a coagulation bath to quickly solidify an epoxy cross‐linked chitosan/carbon microtube composite ink. The fabricated conductive structure demonstrated higher elongation strength and improved elastic stability upon the introducing of polypropylene glycol diglycidyl ether (PPGDGE) as the epoxy cross‐linker, which can be due to the formation of networks between oxiran groups of PPGDGE and chitosan amino groups.     

Size and morphology controllable core cross‐linked self‐aggregates from poly(ethylene glycol‐b‐succinimide) copolymers

We developed a simple route to prepare stabilized micelles and nanovesicles in aqueous solutions. A hydrophobic poly(succinimide) (PSI) was conjugated with the hydrophilic poly(ethylene glycol) (PEG) as a new type of cross‐linkable unit. Spherical aggregates were formed when dissolving the amphiphilic PEG₆₈₂‐b‐PSI₁₃₀ copolymer in aqueous solutions directly, and polymer nanovesicles were prepared by a precipitation‐dialysis method using PEG₄₅₅‐b‐PSI₁₃₀ copolymer. Bifunctional primary amine was added to the micelle or nanovesicle solutions to prepare cross‐linked structures via aminolysis reaction of the succinimide units. The degree of cross‐linking was controlled by adjusting the molar ratio of the cross‐linker to the succinimide units. Increasing the degree of cross‐linking leads to the compaction of the micelle core thus reduced diameter. The cross‐linked polymer micelles or nanovesicles maintained their morphology in extremely diluted solutions because of their structural stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Azide telechelics chain extended by click reaction: Synthesis,characterization, and cross‐linking

Azide telechelics of poly(dimethylsiloxane) (PDMS), polypropylene oxide (PPO), and polyethylene oxide (PEO) were synthesized from the corresponding epoxy telechelics and characterized. These oligomeric azides were chain extended by reaction with bispropargyl ether of bisphenol A (BPEBA) through a copper‐catalyzed azide‐alkyne cycloaddition (CuAAC) reaction. PDMS manifested a faster reaction in contrast to PPO or PEO. The chain‐extended polymers underwent cross‐linking above 170°C through thermal cleavage of residual (terminal) azide groups. This was manifested in their rheograms and was further substantiated by FTIR and NMR spectroscopic analyses. Dynamic mechanical analyses of the cross‐linked polymers exhibited characteristic transitions of hard and soft segments, implying microphase separation in the system. Microscopic evaluation of the thermally cross‐linked sample revealed a porous morphology with microsized to nanosized pores.     

Facile one‐pot/one‐step technique for preparation of side‐chain functionalized polymers: Combination of SET‐RAFT polymerization of azide vinyl monomer and click chemistry

An azido‐containing functional monomer, 11‐azido‐undecanoyl methacrylate, was successfully polymerized via ambient temperature single electron transfer initiation and propagation through the reversible addition–fragmentation chain transfer (SET‐RAFT) method. The polymerization behavior possessed the characteristics of “living”/controlled radical polymerization. The kinetic plot was first order, and the molecular weight of the polymer increased linearly with the monomer conversion while keeping the relatively narrow molecular weight distribution (M_w/M_n ≤ 1.22). The complete retention of azido group of the resulting polymer was confirmed by ¹H NMR and FTIR analysis. Retention of chain functionality was confirmed by chain extension with methyl methacrylate to yield a diblock copolymer. Furthermore, the side‐chain functionalized polymer could be prepared by one‐pot/one‐step technique, which is combination of SET‐RAFT and “click chemistry” methods. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Using glycidyl methacrylate as cross‐linking agent to prepare thermosensitive hydrogels by a novel one‐step method

A novel one‐step approach is reported to prepare thermosensitive hydrogels simply by using hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD)/glycidyl methacrylate (GMA)/N‐isopropylacrylamide (NIPAM) system. From GMA and HP‐β‐CD, HP‐β‐CD/GMA inclusion complex was prepared and identified with NMR, FTIR, and UV‐vis spectroscopies. GMA in the form of HP‐β‐CD/GMA complex was copolymerized with NIPAM in water with K₂S₂O₈ as initiator, yielding hydrogels designated as poly(NIPAM‐CD‐GMA). The inclusion of CD in the hydrogels was confirmed by FTIR spectroscopy. The contents of CD and GMA placed considerable influence on the swelling ratio and temperature‐sensitivity of the produced hydrogels. The hydrogels bearing CD moieties showed higher swelling ratio and temperature‐sensitivity when compared with that without CD. The porous structure of the hydrogels containing CD was observed in the SEM images. Relevant mechanism of the ring‐opening reaction of epoxide groups in GMA, the subsequent crosslinking reactions and the formation of hydrogels containing CD moieties were proposed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2193–2201, 2008     

Influence of variation of a side chain on the folding equilibrium of a β‐peptide: Limitations of one‐step perturbation

In a recent study (Lin et al., Helv. Chim. Acta 2011, 94 , 597), the one‐step perturbation method was applied to tackle a challenging computational problem, that is, the calculation of the folding free enthalpies ΔG_F,U of six hepta‐β‐peptides with different, Ala, Val, Leu, Ile, Ser, or Thr, side chains in the fifth residue. The ΔG_F,U values obtained using one‐step perturbation based on a single molecular dynamics simulation of a judiciously chosen reference state with soft‐core atoms in the side chain of the fifth residue showed an overall accuracy of about k_BT for the four peptides with nonpolar side chains, but twice as large deviations were observed for the peptides with polar side chains. Here, alternative reference‐state Hamiltonians that better cover the conformational space relevant to these peptides are investigated, and post simulation rotational sampling of the χ₁ and χ₂ torsional angles of the fifth residue is carried out to sample different orientations of the side chain. A reference state with rather soft atoms yields accurate ΔG_F,U values for the peptides with the Ser and Thr side chains, but it failed to correctly predict the folding free enthalpy for one peptide with a nonpolar side chain, that is, Leu. Based on the results and those of earlier studies, possible ways to improve the accuracy of the efficient one‐step perturbation technique to compute free enthalpies of folding are discussed. © 2013 Wiley Periodicals, Inc.     

Synthesis of tetracycline‐imprinted polymer microspheres by reversible addition–fragmentation chain‐transfer precipitation polymerization using polyethylene glycol as a coporogen

Tetracycline (TC)‐imprinted microspheres have been synthesized by reversible addition–fragmentation chain‐transfer precipitation polymerization using PEG as a coporogen. In the synthesis, methacrylic acid and ethylene dimethacrylate were used as the functional monomer and cross‐linker, respectively. 2,2′‐Azobisisobutyronitrile was the initiator, and cumyl dithiobenzoate was the chain‐transfer reagent. Although monodispersed microspheres were obtained using acetonitrile as porogen, the particles cannot be used in the column extraction because of the high backpressure. To increase the porosity of the material, PEG was introduced as a coporogen. The influence of the molecular weight and concentration of PEG on the morphology, binding affinity, and porosity of the molecularly imprinted polymers (MIPs) have been studied. The results demonstrated that PEG as a macroporogen increased the porosity of the polymers. Meanwhile, the column backpressure was reduced using the MIPs with higher porosity. The binding affinity of the MIPs was increased when a low concentration of PEG was employed, while it was decreased when the ratio of PEG 12 000/monomers was >0.8%. Under the optimized conditions, TC‐imprinted microspheres with good selectivity and size uniformity have been obtained, which facilitates its application in the column extraction for TC determinations.     

Influence of a reversible addition–fragmentation chain transfer agent in the dispersion polymerization of styrene

Dispersion polymerization was applied to the controlled/living free‐radical polymerization of styrene with a reversible addition–fragmentation chain transfer (RAFT) polymerization agent in the presence of poly(N‐vinylpyrrolidone) and 2,2′‐azobisisobutyronitrile in an ethanol medium. The effects of the polymerization temperature and the postaddition of RAFT on the polymerization kinetics, molecular weight, polydispersity index (PDI), particle size, and particle size distribution were investigated. The polymerization was strongly dependent on both the temperature and postaddition of RAFT, and typical living behavior was observed when a low PDI was obtained with a linearly increased molecular weight. The rate of polymerization, molecular weight, and PDI, as well as the final particle size, decreased with an increased amount of the RAFT agent in comparison with those of traditional dispersion polymerization. Thus, the results suggest that the RAFT agent plays an important role in the dispersion polymerization of styrene, not only reducing the PDI from 3.34 to 1.28 but also producing monodisperse polystyrene microspheres. This appears to be the first instance in which a living character has been demonstrated in a RAFT‐mediated dispersion polymerization of styrene while the colloidal stability is maintained in comparison with conventional dispersion polymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 348–360, 2007