Viability of all-solid-state lithium metal battery coupled with oxide solid-state electrolyte and high-capacity cathode

Owing to the utilization of lithium metal as anode with the ultrahigh theoretical capacity density of3860 mA h g^-1 and oxide-based ceramic solid-state electrolytes(SE),e.g.,garnet-type Li₇La₃Zr₂O₁₂(LLZO),all-state-state lithium metal batteries(ASLMBs) have been widely accepted as the promising alternatives for providing the satisfactory energy density and safety.However,its applications are still challenged by plenty of technical and scienti...     

Enhancing the stability and performance of a battery cathode using a non-aqueous electrolyte

For conductive polymers to be considered materials for energy storage, both their electroactivity and stability must be optimized. In this study, a non-aqueous electrolyte (0.2 M LiClO₄ in acetonitrile) was studied for its effect on the charge storage capacity and stability of two materials used in batteries developed in our laboratory, polypyrrole (pPy) and poly(3,4-ethylenedioxythiophene) (PEDOT) doped with 2,2′-azino-bis(3-ethylbenzothiaxoline-6-sulfonic acid (ABTS). The results are compared to the performance of these materials in an aqueous electrolyte (0.2 M HCl/aq). Loss of ABTS dopant was eliminated principally due to the low solubility of ABTS in acetonitrile, resulting in cathode materials with improved stability in terms of load cycling and performance.     

Composite solid electrolyte of Na_3PS_4-PEO for all-solid-state SnS_2/Na batteries with excellent interfacial compatibility between electrolyte and Na metal

High ionic conductivity and superior interfacial stability of solid electrolytes at the electrodes are crucial factors for high-performance all-solid-state sodium batteries. Herein, a composite solid electrolyte Na_3PS_4-polyethylene oxide is synthesized by the solution-phase reaction method with an improved ionic conductivity up to 9.4 × 10~(-5) S/cm at room temperature. Moreover, polyethylene oxide polymer layer is wrapped homogeneously on the surface of Na_3PS_4 particles, which could effectively avoid the direct contact between Na_3PS_4 electrolyte and sodium metal, thus alleviate their side reactions. We demonstrate that all-solid-state battery SnS_2/Na with the composite solid electrolyte Na_3PS_4-polyethylene oxide delivers an enhanced electrochemical performance with 230 m Ah/g after 40 cycles.     

The potential for long-term operation of a lithium-oxygen battery using a non-carbonate-based electrolyte

Herein we demonstrate the feasibility of extended cycle operation of a Li-O(2) battery by simple control of the discharge/charge protocol. By avoiding electrolyte decomposition and the deep discharge state of the air electrode, we were able to construct a Li-O(2) cell capable of efficiently cycling over 50 times with high energy density.     

Enhancing interfacial stability in solid-state lithium batteries with polymer/garnet solid electrolyte and composite cathode framework

The solid-state lithium battery is considered as an ideal next-generation energy storage device owing to its high safety,high energy density and low cost.However,the poor ionic conductivity of solid electrolyte and low interfacial stability has hindered the application of solid-state lithium battery.Here,a flexible polymer/garnet solid electrolyte is prepared with poly(ethylene oxide),poly(vinylidene fluoride),Li6.75La3 Zr1.75Ta0.25O12,lithium bis(trifluoromethanesulfonyl)imide and oxalate,which exhibits an ionic conductivity of 2.0 ×10^-4 S cm^-1 at 55℃,improved mechanical property,wide electrochemical window(4.8 V vs.Li/Li+),enhanced thermal stabilities.Tiny acidic OX was introduced to inhibit the alkalinity reactions between Li6.75La3 Zr1.75Ta0.25O12 and poly(vinylidene fluoride).In order to improve the interfacial stability between cathode and electrolyte,an Al2 O3@LiNi0.5Co0.2Mn0.3O2 based composite cathode framework is also fabricated with poly(ethylene oxide) polymer and lithium salt as additives.The solid-state lithium battery assembled with polymer/garnet solid electrolyte and composite cathode framework demonstrates a high initial discharge capacity of 150.6 mAh g^-1 and good capacity retention of 86.7% after 80 cycles at 0.2 C and 55℃,which provides a promising choice for achieving the stable electrode/electrolyte interfacial contact in solid-state lithium batteries.     

Rechargeable battery using a novel iron oxide nanorods anode and a nickel hydroxide cathode in an aqueous electrolyte

A rechargeable battery using novel α-Fe(2)O(3)/CNFs composite as the anode, β-Ni(OH)(2) as the cathode and LiOH/KOH solution as the electrolyte in an aqueous rechargeable battery has been proposed. The Fe(2)O(3)/Ni(OH)(2) prototype cell exhibits a high average operational voltage of 1.5 V, high rate capability and good cycling performance.     

Addition of SiO2 to the operation of a polyimide cathode in a sodium battery

The effect of the addition of SiO₂ nanoparticles on the properties of a polyimide cathode was explored by CV, XPS, and galvanostatic cycling methods. The capacity and average cycling potential of the cell increased in the presence of SiO₂. By quantum chemical modeling, it was shown that SiO₂ nanoparticles served as a framework for polyimide, which retained its fixed structure upon metalation with sodium.     

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

Lithium metal is one of the most promising anodes for next-generation batteries due to its high capacity and low reduction potential.However,the notorious Li de...     

LiCoO_2 electrode/electrolyte interface of Li-ion batteries investigated by electrochemical impedance spectroscopy

The storage behavior and the first delithiation of LiCoO2 electrode in 1 mol/L LiPF6-EC:DMC:DEC elec- trolyte were investigated by electrochemical impedance spectroscopy (EIS). It has found that, along with the increase of storage time, the thickness of SEI film increases, and some organic carbonate lithium compounds are formed due to spontaneous reactions occurring between the LiCoO2 electrode and the electrolyte. When electrode potential is changed from 3.8 to 3.95 V, the reversible breakdown of the resistive SEI film occurs, which is attributed to the reversible dissolution of the SEI film component. With the increase of electrode potential, the thickness of SEI film increases rapidly above 4.2 V, due to overcharge reactions. The inductive loop observed in impedance spectra of the LiCoO2 electrode in Li/LiCoO2 cells is attributed to the formation of a Li1-xCoO2/LiCoO2 concentration cell. Moreover, it has been demonstrated that the lithium-ion insertion-deinsertion in LiCoO2 hosts can be well described by both Langmuir and Frumkin insertion isotherms, and the symmetry factor of charge transfer has been evaluated at 0.5.     

Bio-degradable zinc-ion battery based on a prussian blue analogue cathode and a bio-ionic liquid-based electrolyte

Rechargeable zinc-ion batteries are of high interest for electrical energy storage due to their low cost, high safety, and good energy density. The development of stable and high-performance cathode materials and environmentally friendly electrolytes is of interest for practical applications. Despite many efforts in pursuing batteries with high energy density and long cycle life, relatively little attention has been paid on the environmental aspects. Thus, bio-batteries that contain nontoxic materials and which are bio-degradable are an interesting alternative to conventional batteries. In the present paper, we present our first results on a highly reversible zinc/prussian blue analogue (PBA) bio-battery, where nanostructured PBA is used as a cathode material, a bio-degradable ionic liquid-water mixture as electrolyte, and zinc as anode. Both the PBA cathode and the zinc anode exhibit good compatibility with the bio-degradable electrolyte. The Zn/PBA battery shows good electrochemical performance including an open circuit voltage of 1.6 V, a specific capacity of ～54 mAh g^?1 (PBA), and a low self-discharge rate. The zinc anode also shows a good stability since no dendritic growth and shape change are observed after 50 charge-discharge cycles.     

Manipulating interfacial stability of LiNi_(0.5)Co_(0.3)Mn_(0.2)O_2 cathode with sulfide electrolyte by nanosized LLTO coating to achieve high-performance all-solid-state lithium batteries

All-solid-state lithium batteries(ASSLBs) based on sulfide solid-state electrolytes and high voltage layered oxide cathode are regarded as one of the most promising candidates for energy storage systems with high energy density and high safety.However,they usually suffer poor cathode/electrolyte interfacial stability,severely limiting their practical applications.In this work,a core-shell cathode with uniformly nanosized Li0.5La0.5TiO3(LLTO) electrolyte coating on LiNi0.5Co0.3Mn0.2O2(NCM532) is designed to improve the cathode/electrolyte interface stability.Nanosized LLTO coating layer not only significantly boosts interfacial migration of lithium ions,but also efficiently alleviates space-charge layer and inhibits the electrochemical decomposition of electrolyte.As a result,the assembled ASSLBs with high mass loading(9 mg cm-2)LLTO coated NCM532(LLTO@NCM532) cathode exhibit high initial capacity(135 mAh g^-1) and excellent cycling performance with high capacity retention(80% after 200 cycles) at 0.1 C and 25℃.This nanosized LLTO coating layer design provides a facile and effective strategy for constructing high performance ASSLBs with superior interfacial stability.     

In situ X-ray photoelectron spectroscopy investigation of the solid electrolyte interphase in a Li/Li6.4Ga0.2La3Zr2O12/LiFePO4 all-solid-state battery

Journal of Solid State Electrochemistry - The fundamental understanding of the solid electrolyte/electrode interphase during charge and discharge is promising for the development of all-solid-state...     

Room temperature luminescence of a retinal complex of cyclodextrin

Retinal, which is normally insoluble in an aqueous medium and not fluorescent in solution at room temperature, emits a luminescence in the region of 450 nm, even in air-saturated aqueous solutions, when complexed to β or γ-cyclodextrin. The intensity decreases in the order β> γ and the quantum yields of luminescence are in the range 10^?3–10^?4. Further, retinal molecules in the inclusion complexes are subject to a bleaching process. Solubilization in micellar sodium dodecyl sulphate solutions also allows emission, albeit in smaller yield.     

Electrochemical investigations of Na0.7CoO2 cathode with PEO-NaTFSI-BMIMTFSI electrolyte as promising material for Na-rechargeable battery

Journal of Solid State Electrochemistry - We report herein the development of a sodium polymer battery consisting of solid polymer electrolyte (SPE) system (polymer + ionic liquid and salt) as an...     

Highly reversible lithium metal secondary battery using a room temperature ionic liquid/lithium salt mixture and a surface-coated cathode active material

For the purpose of realizing high-voltage, high-capacity, long-life and safe rechargeable batteries, a lithium secondary battery that uses high-voltage stable ZrO2-coated LiCoO2 cathode powder and a nonvolatile high-safety room temperature ionic liquid was fabricated.     

Room temperature synthesis of protonated layered titanate sheets using peroxo titanium carbonate complex solution

We report the synthesis of peroxo titanium carbonate complex solution as a novel water-soluble precursor for the direct synthesis of layered protonated titanate at room temperature. The synthesized titanates showed excellent removal capacity for Pb(2+) and methylene blue. Based on experimental observations, a probable mechanism for the formation of protonated layered dititanate sheets is also discussed.     

Room temperature hydroamination of N-alkenyl ureas catalyzed by a gold(i) N-heterocyclic carbene complex

[Structure: see text] Treatment of an N-4-pentenyl or N-5-hexenyl urea with a catalytic 1:1 mixture of a gold(I) N,N-diaryl imidazol-2-ylidine complex and AgOTf at or near room temperature leads to intramolecular exo-hydroamination to form the corresponding nitrogen heterocycle in excellent yield.     

On a thermodynamic limitation of the water-gas potentiometry using solid electrolyte cells

Possibilities of the water-gas potentiometry using oxide ion-conducting solid electrolytes may be restricted by side reactions in the gas being analyzed. Changes in electrode potentials caused by simultaneous interfering equilibria in the water gas were investigated over a temperature range 1200 to 400°C for different initial gas compositions. Formation reactions of carbon and methane proved to be the side reactions which can be responsible for potential changes. Limits for the use of the analytical method are shown by graphs with deviations from the ideal values.77th report on oxide ion-conducting solid electrolytes and their possibilities of application; 76. see cfi/Ber. DKG (in press)     

Stable performance of an all-solid-state Li metal cell coupled with a high-voltage NCA cathode and ultra-high lithium content poly(ionic liquid)s-based polymer electrolyte

Journal of Solid State Electrochemistry - A poly(ionic liquid)s binder can provide stable performance of high-voltage composite cathodes based on lithium nickel cobalt aluminium oxide...