茂金属化合物对苯乙烯丁二烯嵌段共聚物SBS催化加氢的研究

合成了一系列茂金属催化剂（C5H4R)2TiCl2[R=H(1),Me(2),C6H11(3)]和（C5H4R)2TiAr2[R=H,Ar=C6H5(4),p-MeC6H4(5),m-MeC6H4(6);R=Me,Ar=C6H5(7),p-MeC6H4(8);R=C6H11,Ar=C6H5(9),p-MeC6H4(10)],研究了这些催化剂对苯乙烯丁二烯嵌段共聚物SBS的催化加氢,考察了催化剂种类、用量及催化剂各组分之间的比例对加氢效果的影响,得到了较佳的条件,可使聚合物加氢度达到98%以上,钛催化剂用量为0.001-0.003mmol/g聚合物。     

柄型金属有机化合物(Ⅴ)——锗桥连茚基及取代茚基锆化合物的合成及催化烯烃聚合

锗桥连茚及取代茚配体相继与丁基锂及ZrCl4作用, 生成锗桥连茚基及取代茚基锆化合物Me2Ge(2-R1-4-R2-Ind)2ZrCl2[R1= R2= H(1); R1= Me, R2= H(2); R1= Me, R2= Ph(3)]. 化合物 1-3均为内消旋和外消旋异构体的混合物, 通过多次重结晶得到化合物1和2的纯外消旋异构体及化合物3的内消旋异构体. 由元素分析和 1H NMR 谱表征了化合物的分子结构. 研究了在甲基铝氧烷(MAO)的助催化下, 化合物1-3对乙烯和丙烯聚合的催化性能. 由锗桥连茚基化合物1-3得到的聚乙烯的分子量分布比一般茂金属催化剂略宽. 内消旋和外消旋异构体的混合物(3)由于两个催化活性中心不等同而使得到的聚乙烯的分子量分布相当宽. 外消旋异构体1和2催化丙烯聚合得到高等规聚丙烯.     

二(β-二亚胺基)二价稀土配合物催化醛/酮与亚磷酸二乙酯的氢磷化反应

研究了一系列二(β-二亚胺基)二价稀土配合物[Eu(L~(2,6-ipr2))_2·CH_3C_6H_5,L~(2,6-ipr2)=[N(2,6-~(i)Pr_2C_6H_3)C(Me)]_2CH~-(1);Eu(L~(2,6-Me2))_2(THF),L~(2,6-Me2)=[N(2,6-Me_2C_6H_3)C(Me)]_2CH~-(2);Eu(L~(2,4,6-Me3))_2(THF),L~(2,4,6-Me3)=[N(2,4,6-Me_3C_6H_2)-C(Me)]_2CH~-(3);Eu(L~(2,6-ipr2)Ph)2,L~(2,6-ipr2)Ph=[(2,6-iPr_2C_6H3_)NC(Me)CHC(Me)N(C_6H_5)]–(4);Sm(L~(2,6-ipr2))_2·CH_3C_6H_5(5);Yb(L~(2,6-ipr2)Ph)2(6);Yb(L~(2-Me))2(THF),L~(2-Me)=[N(2-Me C6H4)C(Me)]2CH–(7)]对醛/酮与亚磷酸二乙酯的氢磷化反应的催化行为.发现所有配合物都可以在温和条件下,高效地催化芳醛以及杂环芳醛与亚磷酸二乙酯的氢磷化反应,在催化剂用量为0.08 mol%,25℃,无溶剂条件下反应5 min,α-羟基膦酸酯的收率可以达到90%~99%.催化活性有赖于β-二亚胺基的结构,其活性顺序为L~(2,6-Me2)L~(2,4,6-Me3)L~(2,6-ipr2)≈L~(2,6-ipr2)Ph.该催化体系具有优秀的醛底物适应能力.这类二价稀土配合物也可以有效地催化未活化的酮与亚磷酸二乙酯的反应,并显示良好的底物适应能力.     

[O(S),O=P]型配体修饰的单氯单茂锆催化剂的高温乙烯聚合

以Ph3CB(C6F5)4/iBu3Al作为助催化体系,研究了单氯半茂型催化剂,ClCp′Zr[X-2-R1-4-R2-6-(Ph2P=O)C6H2]2(Cp′=C5H5,a:X=O,R1=Ph,R2=H;b:X=O,R1=F,R2=H;c:X=O,R1=tBu,R2=H;d:X=O,R1=R2=tBu;e:X=O,R1=SiMe3,R2=H;f:X=S,R1=SiMe3,R2=H;Cp′=C5Me5;g:X=O,R1=SiMe3,R2=H)的乙烯高温（50~125 ℃）聚合行为。 结果表明,催化剂a~d可在高温(50~100 ℃)下高效引发乙烯聚合,最佳反应温度为75 ℃。 适当增大R1取代基的位阻或引入吸电子取代基均有利于提高催化活性。 三甲基硅烷基取代的催化剂[WTHZ]e[WTBZ]耐高温性能较催化剂a~d大大提升,在100 ℃时,乙烯聚合活性可达5628 kg/(mol Zr·h)。 金属中心的配位原子及茂环上取代基团的改变对催化活性和聚合物的相对分子质量分布有一定的影响。     

2-苯亚胺官能化吲哚基铕胺基配合物与芳基取代甲脒的反应性（英文）

2-(苯亚胺基次甲基)吲哚铕胺基配合物[η1∶η1-2-(C6H5NH=CH)C8H5N]2Eu[N(Si Me3)2](1)与二芳基取代甲脒(2,6-R2C6H3N=CHNH(C6H3R2-2,6)(R=iPr(2),Me(3))经过配体交换反应,分别得到了含吲哚基脒基铕配合物[η1∶η1-2-(C6H5NH=CH)C8H5N]Eu[(η3-2,6-iPr2C6H3)N=CHN(C6H3iPr2-2,6)][N(Si Me3)2](4)和含脒基的稀土铕配合物[(η3-2,6-Me2C6H3)N=CHN(C6H3Me2-2,6)]2Eu[N(Si Me3)2](5)。结果表明,脒基的位阻显著影响了吲哚基稀土金属胺基配合物与二芳基取代甲脒的配体交换反应。配合物4和5通过IR、元素分析和X射线单晶衍射分析进行了表征。     

柄型金属有机化合物（Ⅴ）——锗桥连茚基及取代茚基锆合物的合成及催化烯烃聚合

锗桥连茚及取代茚配体相继与丁基锂及ZrCl4作用，生成锗桥连茚基及取代茚基锆化合物Me2Ge(2-R^1-4-R^2-Ind)2ZrCl2[R^1=R^2=H(1);R^1=Me,R^2=H(2);R^1=Me,R^2=Ph(3)]。化合物1－3均为内消旋和外消旋异异构体的混合物，通过多次重结晶得到化合物1和2的纯外消旋异构体及化合物3的内消旋异构体。由元素分析和^1H NMR谱表征了化合物的分子结构。研究了在甲基铝氧烷（MAO）的助催化下，化合物1－3对乙烯和丙烯聚合的催化性能。由锗桥连茚基化合物1－3得到的聚乙烯的分子量分布比一般茂金属催化剂略宽，内消旋和外消旋异构体的混合物（3）由于两个催化活性中心不等同而使得到的聚乙烯的分子量分布相当宽。外消旋异构体1和2催化丙烯聚合得到高等规聚丙烯。     

基于两个取代四甲基环戊二烯基配体的金属羰基化合物的合成及晶体结构(英文)

配体[C5Me4HR][R=4-Br Ph(1),(Me C5H3N)CH2(2)]分别与Mo(CO)6,Ru3(CO)12和Fe(CO)5在二甲苯中加热回流,得到了6个双核配合物trans-[η5-C5Me4R]2Mo2(CO)6(3,4),trans-[(η5-C5Me4R)Ru(CO)(μ-CO)]2(5,6)和trans-[η5-(C5Me4R)Fe(CO)(μ-CO)]2(7,8)。通过元素分析、红外光谱、核磁共振氢谱对配合物的结构进行了表征,并用X-射线单晶衍射法测定了配合物3,5,6和8的结构。     

茂金属催化剂催化1-癸烯齐聚研究

考察了1-癸烯和不同结构的茂金属催化剂((η5矿-C5 H5)2ZrCl2,A;[μ,μ-(Me2Si)2(η5-C5H3)2][(η5-C5H5)ZrCl2)]2,B;[(C6H5)C(Me)2(η5-C5H4)]2ZrCl2,C;tBuNC (Me)2(η5-C5H4)ZrCl2,D;(5-C5H4)C(C5H10)(η5-C13H8) ZrCl2,E;(η5-C5 H4)C(Me)2(η5-C13H8)ZrCl2,F;(η5-C5H4)C(C6H5)2(η5-C13 H8)ZrCl2,G)/MAO的齐聚反应,并探讨了茂金属F的用量,聚合温度和Al/Zr比对聚合反应和齐聚物性能的影响.实验结果表明,由于其不同的位阻效应和电子效应,不同结构的茂金属对1-癸烯的催化活性和齐聚物组分分布影响显著.其中,Cp2 ZrCl2,双核硅桥联的茂金属B和大位阻的茂金属C主要合成低粘度的齐聚物(100℃Kv:2～3 cSt,二聚体含量约为60％);限制构型的茂金属D因为有更加开放的配位结构呈现出高的催化活性,齐聚物的粘度也略高(100℃Kv:3 ～4 cSt);Cs-对称型茂金属E,F,G都有较高的催化活性,合成的齐聚物粘度也较高(100℃Kv＞20 cSt),主要归因于茂金属的特殊结构和聚合机理.GC-MS结果表明茂金属催化1-癸烯合成的齐聚物异构化较少,主要由二聚体到五聚体的混合物组成.茂金属F催化1-癸烯较优的齐聚条件是催化剂用量10 μmol,聚合温度80℃,Al/Zr比300∶1.     

含吡咯基亚胺配体稀土铕配合物催化合成胍

以2-(2,4,6-Me3C6H2N=CH)C4H3NH为配体与铕配合物[(Me3Si)2N]3Eu(μ-Cl)Li(THF)3反应,合成了三价铕金属配合物[2-(2,4,6-Me3C6H2N=CH)C4H3N]3Eu(THF),以此配合物为催化剂催化芳胺与N,N’-二异丙基碳二亚胺反应,得到一系列胍产物,研究了反应时间、温度、催化剂用量和溶剂对催化反应的影响。结果表明:铕配合物具有良好的催化活性,以2%mol的催化剂用量、在THF中加热60℃反应8 h,得到高于80%产率的相应胍产物。     

二茚基稀土胺化物催化甲基丙烯酸甲酯聚合

传统甲基丙烯酸甲酯(MMA)立体规整性聚合,通常采用阴离子引发剂(如RMgX)在低温下进行,具有引发剂浓度高,分子量低等缺点.近年,Yasuda[1]报道了单组分茂稀土催化剂(如[(C5Me5)2SmH]2,(C5Me5)2Ln(μ-Me)2AlMe2(Ln=Yb,Y,Lu))催化MMA聚合,获得高分子量间同含量达90%以上的PMMA-(s-PMMA).而Marks[2]则报道用单组分茂稀土催化剂Me2Si(Me4C5)(RC5H3)LaN(TMS)2(R=neomenthyl)获得全同含量达90%以上的PMMA(i-PMMA).最近,我们[3]报道用单组分茂稀土催化剂(C9H7)2Y(μ-Et)2AlEt2获得高全同含量及超高分子量的PMMA.本文研究了…     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.