Effect of the Bulkiness of the End Functional Amide Groups on the Optical,Gelation, and Morphological Properties of Oligo(p‐phenylenevinylene) π‐Gelators

Herein, we describe the role of end functional groups in the self‐assembly of amide‐functionalized oligo(p‐phenylenevinylene) (OPV) gelators with different end‐groups. The interplay between hydrogen‐bonding and π‐stacking interactions was controlled by the bulkiness of the end functional groups, thereby resulting in aggregates of different types, which led to the gelation of a wide range of solvents. The variable‐temperature UV/Vis absorption and fluorescence spectroscopic features of gelators with small end‐groups revealed the formation of 1D H‐type aggregates in CHCl₃. However, under fast cooling in toluene, 1D H‐type aggregates were formed, whereas slow cooling resulted in 2D H‐type aggregates. OPV amide with bulky dendritic end‐group formed hydrogen‐bonded random aggregates in toluene and a morphology transition from vesicles into fibrous aggregates was observed in THF. Interestingly, the presence of bulky end‐group enhanced fluorescence in the xerogel state and aggregation in polar solvents. The difference between the aggregation properties of OPV amides with small and bulky end‐groups allowed the preparation of self‐assembled structures with distinct morphological and optical features.     

Self-assembled pi-nanotapes as donor scaffolds for selective and thermally gated fluorescence resonance energy transfer (FRET)

Self-assembled nanotapes of a few tailor-made oligo(p-phenylenevinylene)s (OPVs) have been prepared and used as supramolecular donor scaffold to study the fluorescence resonance energy transfer (FRET) to a suitable acceptor. In nonpolar solvents, FRET occurs with nearly 63-81% efficiency, exclusively from the self-assembled OPVs to entrapped Rhodamine B, resulting in the quenching of the donor emission with concomitant formation of the acceptor emission at 625 nm. The efficiency of FRET is considerably influenced by the ability of the OPVs to form the self-assembled aggregates and hence could be controlled by structural variation of the molecules, and polarity of the solvent. Most importantly, FRET could be controlled by temperature as a result of the thermally reversible self-assembly process. The FRET efficiency was significantly enhanced (ca. 90%) in a xerogel film of the OPV1 which is dispersed with relatively less amount of the acceptor (33 mol %), when compared to that of the aggregates in dodecane gel. FRET is not efficient in polar solvents due to weak self-organization of the chromophores. These results indicate that energy transfer occurs exclusively from the self-assembled donor and not directly from the individual donor molecules. The present study illustrates that the self-assembly of chromophores facilitates temperature and solvent controlled FRET within pi-conjugated nanostructures.     

Noise-assisted quantum electron transfer in photosynthetic complexes

Electron transfer (ET) between primary electron donor and acceptor is modeled in the photosynthetic complexes. Our model includes (i) two discrete energy levels associated with donor and acceptor, which are directly interacting and (ii) two continuum manifolds of electron energy levels (“sinks”), each interacting with the donor and acceptor. We also introduce external (classical) noise which acts on both donor and acceptor. We derive a closed system of integro-differential equations which describes the non-Markovian quantum dynamics of the ET. A region of parameters is found in which the ET dynamics can be simplified, and described by coupled ordinary differential equations. Using these simplified equations, both cases of sharp and flat redox potentials are analyzed. We analytically and numerically obtain the characteristic parameters that optimize the ET rates and efficiency in this system. In particular, we demonstrate that even for flat redox potential a simultaneous influence of sink and noise can significantly increase the efficiency of the ET. We discuss a relation between our approach and the Marcus theory of ET.     

稠环电子受体光伏材料

基于非富勒烯受体的有机太阳能电池是化学和材料领域的热点前沿之一,中国领跑这个热点前沿.中国学者在非富勒烯受体材料方面取得了一系列重要的创新成果.我们提出了"稠环电子受体(FREA)"这一新概念,构建了高性能稠环电子受体新体系,发明了明星分子ITIC.我们的原创性工作引起了国内外同行的广泛关注和跟进.目前,基于稠环电子受体的有机太阳能电池效率已达到13%~14%,超过富勒烯体系.ITIC等稠环电子受体的出现颠覆了富勒烯受体在有机太阳能电池领域的统治地位,开创了有机太阳能电池的非富勒烯时代.本文简要评述了我们在高性能稠环电子受体设计与器件应用中的研究进展,并展望稠环电子受体的未来发展.     

Donor–acceptor nonradiative energy transfer mediated by surface plasmons on ultrathin metallic films

Selected properties of donor–acceptor energy transfer in the presence of surface plasmon coupled emission (SPCE) on metallic nanofilms are demonstrated. These properties of surface plasmon mediated energy transfer (SPMET) are for the first time compared to those of traditional energy transfer (ET) based on the same donor–acceptor system. The presence of plasmons significantly accelerates energy transfer as revealed by the results of fluorescence intensity decay. In particular, the rise time of acceptor fluorescence intensity upon donor excitation is 10 times shorter in the presence of SPCE. It is also observed that contrary to ET the sensibilized acceptor emission in SPMET is totally linearly polarized.     

Effect of the Functionalization of the Axial Phthalocyanine Ligands on the Energy Transfer in QD-based Donor–Acceptor Pairs

This study examines the electronic coupling between quantum dots (QDs) and molecules on their surfaces as a function of the modality of their interaction. As a probe, the energy transfer (ET) between CdSe QDs and phthalocyanines (Pcs) was monitored and evaluated with regard to the functionalization of the axial phthalocyanine ligand, bulkiness of the functional group bridging the QD donor and Pc acceptor, and the number of the functionalized axial ligands. New silicon PCs and their conjugates with CdSe QDs were synthesized. The ET efficiency and kinetics were studied by steady state and femtosecond time-resolved absorption spectroscopy. We observed a decrease in ET efficiency with the increase in functional group bulkiness, which could be explained by increasing steric hindrance between the ET pair. In addition, a higher ET efficiency was observed for amino and thiol functionalized Pcs compared to Pcs without functional group on the axial alkyl chain.     

Effect of the functionalization of the axial phthalocyanine ligands on the energy transfer in QD-based donor-acceptor pairs.

This study examines the electronic coupling between quantum dots (QDs) and molecules on their surfaces as a function of the modality of their interaction. As a probe, the energy transfer (ET) between CdSe QDs and phthalocyanines (Pcs) was monitored and evaluated with regard to the functionalization of the axial phthalocyanine ligand, bulkiness of the functional group bridging the QD donor and Pc acceptor, and the number of the functionalized axial ligands. New silicon PCs and their conjugates with CdSe QDs were synthesized. The ET efficiency and kinetics were studied by steady state and femtosecond time-resolved absorption spectroscopy. We observed a decrease in ET efficiency with the increase in functional group bulkiness, which could be explained by increasing steric hindrance between the ET pair. In addition, a higher ET efficiency was observed for amino and thiol functionalized Pcs compared to Pcs without functional group on the axial alkyl chain.     

Efficient Intramolecular Energy Transfer between Two Fluorophores in a Bis‐Branched [3]Rotaxane

A bis‐branched [3]rotaxane, with two [2]rotaxane arms separated by an oligo(para‐phenylenevinylene) (OPV) fluorophore, was designed and investigated. Each [2]rotaxane arm employed a difluoroboradiaza‐s‐indacene (BODIPY) dye‐functionalized dibenzo[24]crown‐8 macrocycle interlocked onto a dibenzylammonium in the rod part. The chemical structure of the [3]rotaxane was confirmed and characterized by ¹H and ¹³C NMR spectroscopy and high‐resolution ESI mass spectrometry. The photophysical properties of [3]rotaxane and its reference systems were investigated through UV/Vis absorption, fluorescence, and time‐resolved fluorescence spectroscopy. An efficient energy‐transfer process in [3]rotaxane occurred from the OPV donor to the BODIPY acceptor because of the large overlap between the absorption spectrum of the BODIPY moiety and the emission spectrum of the OPV fluorophore; this shows the important potential of this system for designing functional molecular systems.     

Hierarchical Corannulene‐Based Materials: Energy Transfer and Solid‐State Photophysics

We report the first example of a donor–acceptor corannulene‐containing hybrid material with rapid ligand‐to‐ligand energy transfer (ET). Additionally, we provide the first time‐resolved photoluminescence (PL) data for any corannulene‐based compounds in the solid state. Comprehensive analysis of PL data in combination with theoretical calculations of donor–acceptor exciton coupling was employed to estimate ET rate and efficiency in the prepared material. The ligand‐to‐ligand ET rate calculated using two models is comparable with that observed in fullerene‐containing materials, which are generally considered for molecular electronics development. Thus, the presented studies not only demonstrate the possibility of merging the intrinsic properties of π‐bowls, specifically corannulene derivatives, with the versatility of crystalline hybrid scaffolds, but could also foreshadow the engineering of a novel class of hierarchical corannulene‐based hybrid materials for optoelectronic devices.     

Photophysical properties of novel fluorescent poly(oxyethylene phosphate) tris(β-diketonate) europium (III) complexes

In the present study, photophysical properties of fluorescent poly(oxyethylene phosphate) tris(β-diketonate) europium (III) complexes have been studied by means of stationary and time-resolved fluorescence spectroscopy (in ethanol at room temperature). The luminescent quantum yields and efficiency for the energy transfer from β-diketonate ligands to Eu(III) ion have been determined for the studied complexes by using diffusion-enhanced fluorescence resonance energy transfer. Obtained results show effect of the polymer ligands upon photophysical properties of the complexes and a relation has been established with length of the oxyethylene spacer between two phosphonate groups. The Förster radiuses of the synthesized compounds with SulfoRhodamine 101 as acceptor have been calculated. Measured distances between molecules of the donors and acceptor at identical acceptor/donor molar ratios have been illustrated the difference in structure of the ternary and polymer complexes in solution even at low concentration.     

Supramolecular control over donor-acceptor photoinduced charge separation

A novel donor-bridge-acceptor system has been synthesized by covalently linking a p-phenylene vinylene oligomer (OPV) and a perylene diimid (PERY) at opposite ends of a m-phenylene ethynylene oligomer (FOLD) of twelve phenyl rings, containing nonpolar (S)-3,7-dimethyl-1-octanoxy side chains. For comparison, model compounds have been prepared in which either the donor or acceptor is absent. In chloroform, the oligomeric bridge is in a random coil conformation. Upon addition of an apolar solvent (heptane) the oligomeric bridge first folds into a helical stack and subsequently intermolecular self-assembly of the stacks into columnar architectures occurs. Photoexcitation in the random coil conformation, where the interaction between the donor and acceptor chromophores is small, results only in long-range intramolecular energy transfer in which the OPV singlet-excited state is transformed into the PERY singlet-excited state. In the folded conformation of the bridge, donor and acceptor are closer and their enhanced interaction favors the formation the OPV(*)(+)-FOLD-PERY(*)(-) charge-separated state upon photoexcitation. As a result, the extent of photoinduced charge separation depends on the degree of folding of the bridge between donor and acceptor and therefore on the apolar nature of the medium. As a consequence, and contrary to conventional photoinduced charge separation processes, the formation of the OPV(*)(+)-FOLD-PERY(*)(-) charge-separated state is more favored in apolar media.     

Investigation of excited state electron-transfer reactions. A search for other associative processes

The present investigations were carried out to reveal the nature of the photoinduced electron-transfer (ET) process within the electron donors 1,2,3,4-tetrahydroquinoline (THQ) and 1-methyl-1,2,3,4-tetrahydroquinoline (THMe), and widely used acceptor tetracyanoquinodimethane (TCNQ) in the highly polar solvent acetonitrile (ACN) at 300 K. Observations of considerable overlapping between the emission spectrum of the donor molecules studied in the present investigation and the electronic absorption spectrum of the acceptor TCNQ, coupled to a high negative value of ΔG [the energy gap between the locally excited (LE) and radical ion pair (RIP) states] when one of the chromophores is excited, indicate the possibility of concurrent occurrence of the two processes, e.g. energy and electron transfer. Surprisingly even when the donor chromophore is photoexcited, no spectral manifestation of energy transfer was observed, though both steady state and time resolved (in the time domain of nanosecond order) spectroscopic measurements strongly suggest the occurrence of a highly exothermic ET reaction within the present donor—acceptor systems. Furthermore such ET reactions have been suggested to occur between donor and acceptor separated by a large distance ( ∼ 7 Å), and quenching of fluorescence emission of donor molecules is caused primarily due to outer sphere ET reactions with the acceptor. Measured electron transfer rates (k_ET) were found to be of much lower value ( ∼ 10⁷s⁻¹). It is demonstrated that loose structure of the transient geminate ion pair complex is formed due to the encounter between excited acceptor (or donor) and unexcited donor (or acceptor), and due to this structural property, a stable anionic species (TCNQ⁻ ion) is produced due to the rapid dissociation (probably in the picosecond time domain) of this excited complex. It is hinted that synthesis of biochromophoric systems in which the present donor and acceptor chromophore would be linked by a polymethylene type (σ-type) spacer might be useful in building good photoconducting materials.     

Metallophilic interactions in closed-shell d10 metal-metal dicyanide bonded luminescent systems Eu[Ag(x)Au(1-x)(CN)2]3 and their tunability for excited state energy transfer

We report on the heterobimetallic system, Eu[Ag(x)Au(1-x)(CN)(2)](3) (x = 0-1) in which sensitization of europium luminescence occurs by energy transfer from [Ag(x)Au(1-x)(CN)(2)](-) donor excited states. The donor states have energies which are tunable and dependent on the Ag/Au stoichiometric ratio. These layered systems exhibit interesting properties, one of which is their emission energy tunability when excited at different excitation wavelengths. In this paper, we report on their use as donor systems with Eu(III) ions as acceptor ions in energy transfer studies. Luminescence results show that the mixed metal dicyanides with the higher silver loading have a better energy transfer efficiency than the pure Ag(CN)(2)(-) and Au(CN)(2)(-) donors. The better energy transfer efficiency is due to the greater overlap between the donor emission and acceptor excitation. Additionally, more acceptor states are available in the high silver loading mixed metal Eu(III) complexes. The results from a crystal structure determination and Raman experiments are also presented in this paper and provide information about metallophilic interactions in the closed-shell d(10) metal-metal [Ag(x)Au(1-x)(CN(2)](-) dicyanide clusters.     

Triplet-triplet energy transfer in Langmuir-Blodgett films

The temperature effect on the efficiency of the triplet energy transfer between different molecules included in molecular layers by the Langmuir-Blodgett (LB) procedure was studied. The efficiency of the triplet energy transfer from the LB film of the donor to the LB film of the acceptor is determined by the homogeneous broadening of the energy donor levels.     

Efficient Light‐Harvesting Systems with Tunable Emission through Controlled Precipitation in Confined Nanospace

Light harvesting is a key step in photosynthesis but creation of synthetic light‐harvesting systems (LHSs) with high efficiencies has been challenging. When donor and acceptor dyes with aggregation‐induced emission were trapped within the interior of cross‐linked reverse vesicles, LHSs were obtained readily through spontaneous hydrophobically driven aggregation of the dyes in water. Aggregation in the confined nanospace was critical to the energy transfer and the light‐harvesting efficiency. The efficiency of the excitation energy transfer (EET) reached 95 % at a donor/acceptor ratio of 100:1 and the energy transfer was clearly visible even at a donor/acceptor ratio of 10 000:1. Multicolor emission was achieved simply by tuning the donor/acceptor feed ratio in the preparation and the quantum yield of white light emission from the system was 0.38, the highest reported for organic materials in water to date.     

Influence of supramolecular organization on energy transfer properties in chiral oligo(p-phenylene vinylene) porphyrin assemblies

A comparative study on oligo(p-phenylene vinylene) (OPV)-appended porphyrins containing all trans-vinylene (either hydrophilic or lipophilic) or amide linkages (lipophilic) is presented. The type of supramolecular arrangement obtained in organic solvents proves to be strongly dependent on the nature of the covalent connection. In the case of all trans-vinylene linkages, a J-type intermolecular packing is obtained and the assemblies are only of moderate stability. Conversely, the supramolecular structures obtained from the amide-linked system display an H-type stacking arrangement of enhanced stability and chirality as a consequence of intermolecular hydrogen bonding along the stack direction, favorably interlocking the stacked building blocks. Interestingly, the observed differences in stability and organization are qualitatively illustrated by monitoring the sequential energy transfer process in both types of assemblies. Efficient intramolecular energy transfer from the OPVs (donors) to the respective porphyrin cores is followed by energy transfer from Zn-porphyrin (donor) to free-base porphyrin (acceptor) in both systems. However, the improved intermolecular organization for the amide-linked system increases the energy transfer efficiency along the stack direction. In addition, the water-soluble (OPV)-appended porphyrin system forms highly stable assemblies in an aqueous environment. Nevertheless, the poor energy transfer efficiency along the stack direction reveals a relative lack of organization in these assemblies.     

Long-range electron and excitation energy transfer in donor–bridge–acceptor systems

Donor–bridge–acceptor (D-B-A) systems, either as supermolecules or on surfaces, have been extensively studied with respect to long-range electron (ET) and excitation energy (EET) transfer. In more recent years, the main research objective has been to develop knowledge on how to construct molecular-based devices, with predetermined electron transfer properties, intended for application in electronics and photovoltaics. At present, such construction is in general hampered for several reasons. Most importantly, the property of a D-B-A system is not a simple linear combination of properties of the individual components, but depends on the specific building blocks and how they are assembled. An important example is the ability of the bridge to support the intended transfer process. The mediation of the transfer is characterized by an attenuation factor, β, often viewed as a bridge specific constant but which also depends on the donor and the acceptor, i.e. the same bridge can either be poorly or strongly conducting depending on the donor and acceptor. This review gives an account of the experimental exploration of the attenuation factor β in a series of bis(porphyrin) systems covalently linked by bridges of the oligo(phenyleneethynylene) (OPE) type. Attenuation factors for ET as well as for both singlet and triplet EET are discussed. A report is also given on the dependence of the transfer efficiency on the energy-gap between the donor and bridge states relevant for the specific transfer process. The experimental variation of β with varying donor and acceptor components is shown for a range of conjugated bridges by representative examples from the literature. The theoretical rationalization for the observed variation is briefly discussed. Based on the Gamow tunneling model, the observed variations in β-values with varying donors and acceptors for the same bridges is simulated successfully simultaneously as the observed energy-gap dependence is modelled.     

Thermal profiles of förster energy transfer preliminary studies of luminescent probes of protein dynamics in transferrin and calmodulin

Fluorescence energy transfer, the transfer of energy from a donor to an acceptor via a dipole/induced dipole mechanism, has long been used to measure distances between donors and acceptors in proteins and other macromolecules. Because the transfer can occur over time scales larger than protein bending and breathing modes, multiple conformational states can be sampled. The analysis of these states is weighted by the donor-acceptor distance; shorter distances carry more weight, because the energy transfer depends on the inverse sixth power of the distance. The usefulness of fluorecence energy transfer in probing these large amplitude protein motions is studied here. The method involves measuring the nergy transfer efficiency while perturbing the protein conformation with heat. As the temperature increases, the amplitudes of vibrations increase, and fluorescence energy transfer should also increase if the donor and acceptor are in flexible region of the protein. This hypothesis was tested in two different protein systems; calmodulin, a calcium- activated regulatory protein, and transferrin, a blood serum iron shuttle. The preliminary studies show a differential sensitivity of the transfer efficiency to heat for the systems. Normalized energy transfer over 10 Å in calmodiulin from a tyrosine donor to a Tb(III) acceptor increases 40% from 297 to 322 K. Normalized energy transfer over 42 Å in transferrin from a Tb(III) donor to an Fe(III) acceptor increase 35% over the same temperature range. In marked contrast to these systems, energy transfer from tyrosine to a chelated Tb(III) shows anomalously high temperature- dependence.     

ENERGY TRANSFER AND ENERGY LOSSES IN BILAYER MEMBRANE VESICLES (LIPOSOMES)

Abstract. The efficiency of singlet-singlet energy transfer was studied in bilayer lipid membrane vesicles (liposomes) for the following donor-acceptor systems: (1) p -terphenyl (TP) and diphenyloctatetraene (DPO); (2) DPO and chlorophyll a (Chl a ); and (3) β-carotene and Chl a. The energy transfer efficiency φ_DA was measured by sensitized fluorescence of the acceptor. Fractional quenching of the donor φ_Q was found from the donor fluorescence in absence and presence of the acceptor. For TP-DPO and for DPO-Chl a , the transfer efficiency increased with increasing acceptor concentration but was essentially independent of the donor concentration. No energy transfer from β-carotene to Chl a could be detected. In liposomes, φ_DA differed only slightly from φ_Q at all donor and acceptor concentrations, thus demonstrating the absence of any appreciable energy losses. For solutions of the same donor-acceptor pairs in cyclohexane φ_Q was considerably larger than φ_DA. The difference represents energy lost, principally by internal conversion, due to collisional quenching. The principal function of the lipid membrane appears to be the suppression of such losses. In addition, the rate of energy transfer in lipid membranes is about double that in solutions (at the same intermolecular distance) due to more favorable orientation.     

Noncovalent Macromolecular Architectures of Oligo(p-phenylenevinylene)s (OPVs): Role of End Functional Groups on the Gelation of Organic Solvents

Summary: Self-assembly of a few OPV derivatives having different end functional groups to aggregates, fibrous networks and organogels are discussed. OPV1 and OPV2 functionalized with ester moieties form gels in nonpolar hydrocarbon solvents whereas OPV3 with carboxylic acid groups form gel from THF and dichloromethane. OPV4 with dicyano moieties form aggregates but could not gelate solvents. AFM and TEM studies revealed considerable difference in the morphology of the self-assembled structures of OPV1-4 . From the optical, morphological and gelation data it is concluded that the nature of the end functional groups strongly influences upon the self-assembly and gelation properties of OPVs.