基于部分网络编码的移动自组网实时多播协议研究

传统网络编码可以减少数据包的转发次数,但会造成数据包较大的延时,且容易造成网络的拥塞.本文提出一种基于部分网络编码的实时多播协议——PNCRM.该协议将部分网络编码与mesh的建立结合在一起,有效地减小了端到端的延时,并且改善了网络吞吐量性能.仿真结果表明,与PUMA或基于传统网络编码的实时多播协议相比,PNCRM更好地适应接收节点较多、动态性较大的环境,且在数据包投递率及端到端的延时方面有着显著的优势.     

一种基于网络编码的移动自组网实时多播协议

针对移动自组网中的实时多播场景,提出一种基于网络编码的协议—NCRM.该协议可通过减少网络中数据包的转发次数降低节点能耗,并可改善网络吞吐量性能.为适应实时性要求,在NCRM中引入了严格的时延限制机制.仿真结果显示,与PUMA、MAODV等传统协议相比较,NCRM能更好地适应存在多接收节点、高移动性的环境,且在传输可靠性与节省能耗方面具有显著优势.     

基于定向天线的移动自组网路由协议研究

同等功耗下,定向天线能够产生更高的增益,提供更大的传输范围,提高网络的空间复用度和吞吐量,天线选择的方向性又降低了邻近结点之间的相互干扰,采用定向天线能够给移动自组网带来潜在性能的提高。对基于定向天线的移动自组网路由协议进行研究,简单介绍了定向天线,总结了引入定向天线产生的路由问题,对现有的一些典型定向路由协议进行了分类、介绍和比较,最后对引入定向天线带来的好处进行了分析。     

移动自组网典型路由协议的性能分析与比较

分析了移动自组网的先应式路由协议DSDV和按需路由协议AODV与DSR,并通过网络仿真软件ns2进行了仿真实验,对其分组投递率,端到端平均时延、吞吐量、路由开销等方面的性能进行了分析和比较.实验结果表明,按需路由协议具有更好的性能.     

移动自组网中基于预测的路由协议研究

由于移动自组网中的节点可以任意的运动，导致网络中传输路径的频繁断裂，大量的重路由操作降低了网络性能，并占用了有限的网络资源。而基于预测的路由协议能够有效地减少网络拓扑结构的变化对于路由操作的影响。文章主要讨论了目前已经提出的几种节点运动预测方案．以及基于预测的路由协议，并提出了进一步的研究方向。     

移动自组网中基于部分网络编码的机会主义路由

完全网络编码可用以解决机会主义路由中空间重用及重复报文问题,但增大了报文平均延迟,且报文数据流表现出突发性特征,不利于目标节点解码.本文针对移动自组网提出基于部分网络编码的机会主义路由OR-PNC,采用任意长度部分网络编码方式对报文编码.实验表明OR-PNC可有效降低报文平均延迟达26%,目标节点应用层原始报文到达流更均衡.     

高动态移动自组网路由协议研究

目前的移动自组网研究主要针对运动速度较慢的地面网络。本文研究由高速节点组成的高动态移动自组网的路由协议,提出了一个结合表驱动路由和地理位置路由的混合路由协议TOPOS,在局部使用表驱动路由加快数据包的转发,而在全局使用地理位置路由以适应快速变化的网络拓扑。在OPNET仿真平台上对TOPOS和已有的AODV及GRP协议的性能比较表明,TOPOS对于节点的运动速度和网络规模具有更好的适应性。     

UWB移动自组网络的路由协议研究

UWB技术的出现，为移动自组网络的应用研究带来了机遇和挑战。UWB信号的测距能力使路由协议的设计更加灵活。本文针对UWB技术的特点进行了阐述，总结了现有的UWB路由协议研究，并提出了该领域面临的问题和亟待解决的关键技术。     

基于地理定位信息的移动自组网路由协议综述

移动自组网是自组网技术的重要应用领域,其关键技术在于路由协议的设计和选取.分析了移动自组网路由协议的基本设计原则和分类,总结了基于地理定位信息的移动自组网路由协议的发展现状和特点,指明了目前研究的热点方向.最后,对移动自组网的发展方向进行了展望.     

移动自组网组播路由协议的分析

移动自组网是无中心、自组织、可快速展开、可移动的对等式网络,组播作为群组服务在移动自组网中应用广泛。移动自组网具有节点移动频繁、能源和带宽有限等特点,它要求组播协议能在节点频繁移动下具备良好的健壮性,传统的组播协议已不适用。文章介绍了移动自组网组播路由协议,描述了几种组播路由协议的基本运行过程,并对其性能进行了分析和比较,最后论述了组播协议在能源、安全、组播服务(QOS)、利用位置信息等方向的应用前景及面临的问题。     

无线mesh网络中编码感知且负载均衡的组播路由

提出一种新的基于网络编码的负载均衡路由量度CRM-LB(coding-aware routing metric with load balancing),CRM-LB在CRM(coding-aware routing metric)的基础上增加了对路径p上所有节点通信密集程度与网络拥塞程度的考虑。进一步提出了基于CRM-LB的无线mesh网络多播路由CLR(coding and load-balancing routing)。该协议可以增加网络编码机会,同时考虑到网络中的负载均衡。通过性能分析和仿真实验表明,该协议在提高多播吞吐量的前提下,不仅能更好地支持网络编码,而且网络负载基本均衡。     

An efficient mesh‐based multicast routing protocol in mobile ad hoc networks

Mesh‐based multicast routing protocols for mobile ad hoc networks (MANETs) build multiple paths from senders to receivers to deliver packets even in the presence of links breaking. This redundancy results in high reliability/robustness but may significantly increase packet overhead. This paper proposes a mesh‐based multicast protocol, called centered protocol for unified multicasting through announcements (CPUMA), that achieves comparable reliability as existing mesh‐based multicast protocols, however, with significantly much less data overhead. In CPUMA, a distributed core‐selection and maintenance algorithm is used to find the source‐centric center of a shared mesh. We leverage data packets to center the core of each multicast group shared mesh instead of using GPS or any pre‐assignment of cores to groups (the case of existing protocols). The proposed centering scheme allows reducing data packet overhead and creating forwarding paths toward the nearest mesh member instead of the core to reduce latency. We show, via simulations, that CPUMA outperforms existing multicast protocols in terms of data packet overhead, and latency while maintaining a constant or better packet delivery ratio, at the cost of a small increase in control overhead in a few scenarios. Copyright © 2010 John Wiley & Sons, Ltd.     

图压缩优化光组播最小网络编码路由

将网络编码和光网络相结合可以有效解决光网络的 带宽资源利用率等问题。然而,在光网络中进行编码操作,又将增加光网的光域运算开销、 复杂度和缓存需求。为了减少光网络中网络编码的操作次数,本文提出一种基于图压缩的方 法优化光网络拓扑结构, 结合智能优化遗传算法(GA)实现组播最大速率的光组播最小编码节点,通过对光网络拓扑结 构中的一类特殊潜在编码节点 进行压缩处理,达到缩小算法搜索空间、排除大量非最优解的目的。仿真结果表明,通过本 文图压缩优化后的光网络拓扑结 构,可以使得现有的智能优化GA在求解光组播最小网络编码路由问题时效率更高,寻找到的 解更优。     

移动Ad Hoc网络路由协议性能仿真对比分析

基于OPNET仿真平台,通过考察节点移动速度、节点移动暂停时间、节点密度和发包间隔对路由协议性能的影响,全面地研究了移动AdHoe网络中典型路由协议的性能。为了公平地对比按需驱动类路由协议和表驱动类路由协议,采用了归一化路由负载作为路由开销的性能指标,最后对3个方面的路由协议性能进行对比和分析。结果表明,仿真结果和理论分析是相符的,因此采用的方法是正确的。     

机会网络编码路由协议性能分析与研究

首先引入机会网络的概念以及相应的基础理论知识,包括机会网络的体系结构、通信模式及一些经典的路由协议,然后主要介绍了网络编码的基本概念和原理,重点描述了线性网络编码方法及基于此的高效路由协议,最后对机会网络基于编码路由协议未来发展前景进行了展望。     

Middleman covert channel establishment based on MORE routing protocol using network coding in ad hoc networks

Covert channels have been recently the subject of the study in both creation and countermeasure aspects. There are many different ways to embed the covert data in network standards and protocols, especially in wireless networks. MORE (MAC‐independent opportunistic routing) is an opportunistic routing protocol which uses networks coding to enhance routing performance by reducing the repetitions. This protocol can be a suitable medium for covert channel establishment. A middleman covert channel establishment method is proposed in this paper over MORE routing protocol and with the use of network coding. Hidden data are transferred through packet's payload bytes. Covert sender manipulates coding mechanism by calculating packets' coefficients instead of random selection. The proposed covert channel provides the average throughput of 218 and 231 bps, using two different data length approaches which is relatively a good comparing to the previous network layer covert channels. The proposed covert channel is also a covert storage channel and cannot be removed or restricted. Effect of different network characteristics on the proposed method's capacity and security is investigated by a simulation study, and the results are discussed.     

移动Ad Hoc网络中基于Qos的多路径路由协议研究

针对现有移动Ad Hoc网在大流量业务下无法提供高质量QoS保障的问题,通过推导证明提出了路径长度限制的路径稳定的约束关系,进而将QoS的判定因子引入一种确定性的最优权值约束路由算法进行实例化,并在该路由算法的基础上提出了基于QoS保障的多路径路由协议(MP-QAODV).通过仿真,验证了MP-QAODV协议在平均端到端时延、端到端数据分组投递率、归一化路由开销等方面优于AODV和AOMDV协议.     

Secure multicast routing protocols in mobile ad‐hoc networks

A mobile ad‐hoc network (MANET) is a collection of autonomous nodes that communicate with each other by forming a multi‐hop radio network. Routing protocols in MANETs define how routes between source and destination nodes are established and maintained. Multicast routing provides a bandwidth‐efficient means for supporting group‐oriented applications. The increasing demand for such applications coupled with the inherent characteristics of MANETs (e.g., lack of infrastructure and node mobility) have made secure multicast routing a crucial yet challenging issue. Recently, several multicast routing protocols (MRP) have been proposed in MANETs. Depending on whether security is built‐in or added, MRP can be classified into two types: secure and security‐enhanced routing protocols, respectively. This paper presents a survey on secure and security‐enhanced MRP along with their security techniques and the types of attacks they can confront. A detailed comparison for the capability of the various routing protocols against some known attacks is also presented and analyzed. Copyright © 2013 John Wiley & Sons, Ltd.     

Moralism: mobility prediction with link stability based multicast routing protocol in MANETs

In recent research, link stability is getting tremendous attention in mobile adhoc networks (MANETs), because of several impediments that occur in a reliable and robust network. Link stability metric is used to improve network performance in terms of end-to-end delay, data success delivery ratio (DSDR) and available route time (ART). Energy consumption, bandwidth and communication delay of major concern in ad hoc networks. A high mobility of MANET nodes reduces the reliability of network communication. In a dynamic networks, high mobility of the nodes makes it very difficult to predict the dynamic routing topology and hence cause route/link failures. Multicast in MANETs is an emerging trend that effectively improves the performance while lowering the energy consumption and bandwidth usage. Multicast routing protocol transmits a packet to multicast a group at a given time instant to achieve a better utilization of resources. In this paper, node mobility is considered to map better their movement in the network. So, the links with long active duration time can be identified as a stable link for route construction. Variation in signal strength is used to identify whether the direction of the node is towards or away from estimating node. We consider signal strength as QoS metric to calculate link stability for route construction. Efforts are made to identify the link with highly probable longer lifetime as the best suitable link between two consecutive nodes. We predict the movement time of nodes that define the route path to the node destination. Exata/cyber simulator is used for network simulation. The simulation results of the proposed routing protocol are compared with on-demand multicast routing protocol and E-ODMRP, which works on minimum hop count path. Analysis of our simulation results has shown improvement of various routing performance metrics such as DSDR, ART, routing overhead and packet drop ratio.     

基于粒子滤波步行长度预测的移动ad hoc网络路由算法

针对移动ad hoc网络拓扑结构变化大、路由复杂度高、数据传输性能低等问题,提出了一种新的移动通信系统自适应路由算法。为了使得网络拓扑结构更接近移动网络间歇性连接的特点,该算法在网络结构上采用了一种改进的Levy Walk移动模型。采用一种粒子滤波步行长度预测的方法,通过蒙特卡罗抽样得到递归贝叶斯滤波器,并在粒子滤波后进行步行长度预测,确定消息的副本数量,从而减少由于节点转发过多消息副本带来的能量消耗量,提高消息的传递效率。实验仿真结果表明：与基于改进蚁群优化和利润优化模型的路由算法相比,该算法的消息传递成功率分别提高了0.08和0.04,节点平均能量效率提高了17.9%和13.4%,在提升数据传输成功率和节能上具有较好效果。