Preparation and characterization of polystyrene/Ag core-shell microspheres--a bio-inspired poly(dopamine) approach

In this work, we have systematically investigated the formation and characterization of Self-assembled Monolayer (SAM) films of several silanes on indium tin oxide (ITO) surfaces. Silane molecules having different domains namely substrate binding domain (siloxanes), electron transport region (aliphatic and aromatic spacer) and terminal functional groups (-SH, -CH(3) groups) are employed for the study in order to tune the electron transfer (ET) behaviour across SAM modified electrode-electrolyte interface. Structural characterization of these monolayer films is carried out using X-ray photoelectron spectroscopy (XPS) studies. Wettability (hydrophilic and hydrophobic nature) of such modified electrodes is evaluated using contact angle measurements. ET behaviour of these modified electrodes is investigated by electrochemical techniques namely cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) using K(4)Fe(II)(CN)(6)|K(3)Fe(III)(CN)(6) redox couple as a probe. Disappearance of redox peaks in the CV measurements and formation of semicircle having a higher charge transfer resistance (R(ct)) values during EIS studies suggest that the resultant monolayer films are compact, highly ordered with very low defects and posses good blocking property with less pinholes. The heterogeneous ET rate constant (k) values are determined from EIS by fitting them to an appropriate equivalent circuit model. Based on our results, we comment on tuning the ET behaviour across the interface by a proper choice of spacer region.     

Investigations on the kinetics of electron transfer reactions in magnetic fields

There is a controversial debate if a magnetic field can influence the rate of electron transfer (ET) reactions. In this paper, we report kinetic measurements of the ET rate constants for the redox couples [IrCl6]2-/[IrCl6]3-, [Fe(CN)6]3-/[Fe(CN)6]4-, and [Fe(H2O)6]3+/[Fe(H2O)6]2+ in magnetic fields up to 1 T. To reduce effects arising from magnetically induced mass transport (magnetohydrodynamic effect), disk microelectrodes with a diameter of 50 microm were used in potentiodynamic (cyclic and linear sweep voltammetry) and in electrochemical impedance spectroscopy experiments. None of the investigated redox couples showed a magnetic field effect on the ET rate constant.     

Electron-transfer studies in a lyotropic columnar hexagonal liquid crystalline medium

We have studied the electron-transfer properties of some redox systems on a gold electrode in a lyotropic hexagonal columnar liquid crystalline phase (H1 phase) using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The liquid crystalline medium consists of the nonionic surfactant Triton X-100 and water. The redox reactions that have been studied are ferrocene/ferricenium, [Fe(CN)6]3-/4-, and [Ru(NH3)6]3+/2+. We have confirmed by polarizing optical microscopy that the liquid crystalline nature of the medium is maintained even after the addition of the redox species and the supporting electrolyte. The CV studies show a significant shift in the half-peak potentials of these redox reactions in the liquid crystalline medium. From the EIS studies, we have measured the diffusion coefficients and the kinetic parameters for the redox species. These results are discussed and compared with the values obtained in the conventional solvent medium. The CV and impedance studies demonstrate that the hexagonal columnar phase provides a novel controlled environment for the study of electron-transfer reactions in biological and physiological media.     

十二烷基磺基甜菜碱与铂电极支撑的磷脂双层膜作用的电化学研究

以铂电极支撑的磷脂双层膜(Supported Bilayer Lipid Membrane,s-BLM)作为生物膜的模型,以Fe(CN)36-和Fe(CN)64-为探针分子,利用循环伏安法(CV)和交流阻抗谱(EIS)研究两性表面活性剂十二烷基磺基甜菜碱(Dodecyl Sulfobetaine,DSB)对s-BLM相互作用。结果显示,DSB可以嵌入到s-BLM的疏水区,容易使其表面分子的排列发生变化,产生缺陷或孔洞,探针分子Fe(CN)63-和Fe(CN)64-可以通过这些微孔接近电极,产生氧化还原响应。并且作用时间、DSB的浓度以及胆固醇的存在与否对二者的相互作用有直接影响。此外作用后的双层膜在0.1mol/LKCl溶液中能够自我修复,这表明DSB与s-BLM的相互作用是可逆的。     

Direct Electrochemistry and Electrocatalysis Behaviors of Glucose Oxidase Based on Hyaluronic Acid-Carbon Nanotubes-Ionic Liquid Composite Film

Multi‐walled carbon nanotubes (MWNTs) were dispersed in the ionic liquid [BMIM][BF₄] to form a uniform black suspension. Based on it, a novel glucose oxidase (GOx)‐hyaluronic (HA)‐[BMIM][BF₄]‐MWNTs/GCE modified electrode was fabricated. UV‐vis spectroscopy confirmed that GOx immobilized in the composite film retained its native structure. The experimental results of EIS indicated MWNTs, [BMIM][BF₄] and HA were successfully immobilized on the surface of GCE and [BMIM][BF₄]‐MWNTs could obviously improve the diffusion of ferricyanide toward the electrode surface. The experimental results of CV showed that a pair of well‐defined and quasi‐reversible peaks of GOx at the modified electrode was exhibited, and the redox reaction of GOx at the modified electrode was surface‐confined and quasi‐reversible electrochemical process. The average surface coverage of GOx and the apparent Michaelis‐Menten constant were 8.5×10⁻⁹ mol/cm² and 9.8 mmol/L, respectively. The cathodic peak current of GOx and the glucose concentration showed linear relationship in the range from 0.1 to 2.0 mmol/L with a detection limit of 0.03 mmol/L (S/N=3). As a result, the method presented here could be easily extended to immobilize and obtain the direct electrochemistry of other redox enzymes or proteins.     

Electrochemical characteristics of polyelectrolyte brushes with electroactive counterions

Cyclic voltammetry (CV) was employed to characterize the electrochemical behavior of polyelectrolyte brushes with immobilized electroactive counterions in response to external changes in concentration and composition of the supporting electrolyte and as a function of brush thickness. Poly(methacryloyloxy)ethyl-trimethyl-ammonium chloride (PMETAC) brushes were synthesized on Au substrates via atom transfer radical polymerization followed by ion-exchange with ferricyanide ions ([Fe(CN)6]3-) as redox probes. CV measurements of the modified PMETAC brushes showed the typical electrochemical response corresponding to a surface-confined electroactive species and the redox counterions, as [Fe(CN)6]3- species form stable ion pairs with the quaternary ammonium groups of the brush. The electron-transfer features of PMETAC brushes with different thicknesses, as characterized by CV and UV-vis spectroscopy, revealed that the charge density probed by CV was lower than the charge density measured by UV-vis spectroscopy. The electrode current decreased significantly with increasing concentration of supporting electrolyte due to the effect of the Donnan potential. Hydrophobic counterions, ClO4-, which induced brush collapse, lead to significantly reduced electrode currents.     

Electron transport through a self-assembled monolayer of thiol-end-functionalized tetraphenylporphines and metal tetraphenylporphines

The monolayers of several thiol-end-functionalized tetraphenylphophines (SH-TPP) and metal tetraphenylporphines (SH-MTPP) were self-assembled on gold surfaces and identified by cyclic voltammetry (CV), electrochemical impedance spectroscopy, scanning electrochemical microscopy, and the contact angle. The CV peaks of the [Fe(CN)6]3-/ [Fe(CN)6]4- couple were used to identify the efficiency of electrons transferring through the self-assembled monolayer (SAM). The results suggested that SH-TPP and SH-MTPP could form high-quality SAMs on gold surfaces. The SAMs blocked electron transport from the gold electrode to solution. When the length of the thiol-end-link spacer (alkyl group) increased, the electron transport ability of the SAM decreased because of the increased insulator properties of the alkyl chain. With the insertion of metallic ions, the electron transport ability of the SAM of SH-MTPP increased compared to that of the SAM of SH-TPP, which was probably due to the fact that (i) the insertion of metallic ions changed the molecular structure and the molecular structure of SH-MTPP played an important role in electron transport through the SAM and (ii) the insertion of metallic ions increased the electron tunneling probability through the monolayer.     

Investigating Electrochemical Stability and Reliability of Gold Electrode‐electrolyte Systems to Develop Bioelectronic Nose Using Insect Olfactory Receptor

This article aims to demonstrate an electrochemically stable and reliable gold electrode‐electrolyte system to develop an insect odorant receptor (Drosophila melanogaster Or35a) based bioelectronic nose. Cyclic voltammograms (CVs) and electrochemical impedance spectroscopy (EIS) of bare gold electrodes, after modification with the self‐assembled monolayer (SAM) of 6‐mercaptohexanoic acid (MHA) and after immobilization with Or35a integrated into the lipid bilayers of liposomes were conducted in the presence of four different redox probes. Potassium ferri/ferrocyanide [Fe(CN)₆]^3?/[Fe (CN)₆]^4? and hydroquinone (H₂Q) redox probes revealed variable and irreversible signals at the time scale of our measurements, with atomic force microscopy (AFM) images and x‐ray photoelectron spectroscopy (XPS) results suggesting gold surface etching due to the presence of CN^? ions in case of [Fe(CN)₆]^3?/[Fe (CN)₆]^4?. Although the hexaammineruthenium complex showed stable electrochemical behaviour at all stages of biosensor development, changes in CV and EIS readings after each surface modifications were insignificant. PBS buffer as a non‐Faradaic medium, was found to provide reliable systems for electrochemical probing of modified gold electrodes with Or35a/liposomes in aqueous media. Using this system, we have shown that this novel biosensor can detect its known odorant E2‐hexenal selectively compared to methyl salicylate down to femtomolar concentration.     

Covalent attachment of glucose oxidase to an Au electrode modified with gold nanoparticles for use as glucose biosensor

A feasible method to fabricate glucose biosensor was developed by covalent attachment of glucose oxidase (GOx) to a gold nanoparticle monolayer modified Au electrode. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) of ferrocyanide followed and confirmed the assemble process of biosensor, and indicated that the gold nanoparticles in the biosensing interface efficiently improved the electron transfer between analyte and electrode surface. CV performed in the presence of excess glucose and artificial redox mediator, ferrocenemethanol, allowed to quantify the surface concentration of electrically wired enzyme (Gamma(E)(0)) on the basis of kinetic models reported in literature. The Gamma(E)(0) on proposed electrode was high to 4.1 x 10(-12) mol.cm(-2), which was more than four times of that on electrode direct immobilization of enzyme by cystamine without intermediate layer of gold nanoparticles and 2.4 times of a saturated monolayer of GOx on electrode surface. The analytical performance of this biosensor was investigated by amperometry. The sensor provided a linear response to glucose over the concentration range of 2.0 x 10(-5)-5.7 x 10(-3) M with a sensitivity of 8.8 microA.mM(-1).cm(-2) and a detection limit of 8.2 microM. The apparent Michaelis-Menten constant (K(m)(app)) for the sensor was found to be 4.3 mM. In addition, the sensor has good reproducibility, and can remain stable over 30 days.     

Functionalization of gold cysteamine self-assembled monolayer with ethylenediaminetetraacetic acid as a novel nanosensor

Electrochemical characterization of gold cysteamine self-assembled monolayer, in situ functionalized with ethylenediaminetetraacetic acid (Au-CA-EDTA SAM), is described by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and Osteryoung square wave voltammetry (OSWV). The results obtained by EIS and CV, in the presence of [Fe(CN)₆]^3−/4− redox probe, show that EDTA is successfully grafted to the surface of Au-CA electrode. Reproducible and reversible variation of the R_ct and ΔEp as a function of solution pH show that Au-CA-EDTA SAM is stable in a wide range of pH and potentials. Accumulation of the Pb²⁺ and Cu²⁺ ions on the Au-CA-EDTA SAM electrode is investigated using faradaic currents or impedimetric effects measured by OSWV and EIS, respectively. These results reveal the presence of active complexing functional groups of EDTA on the surface, and thus, the formation of Au-CA-EDTA SAM electrode. The new sensor responds to the Pb²⁺ and Cu²⁺ separately and simultaneously in a wide linear range of concentrations.     

银纳米修饰电极的制备及电化学行为

金属纳米粒子由于其小的体积和大的比表面积而具有独特的电子、光学和异相催化特性,是目前表面纳米工程及功能化纳米结构制备的一种理想研究对象[1]。银纳米粒子可广泛应用于催化剂材料、电池的电极材料、低温导热材料和导电材料等,成为近年来人们研究的热点[2,3]。在电化学方面,银纳米粒子具有比其他纳米粒子更为优异的导电性能和电催化性能。因此,研究银纳米粒子修饰电极有重要的应用价值和前景[4]。1实验部分1.1仪器CHI660电化学工作站(USA);TU-1901型双光束紫外可见分光光度计(北京普析通用仪器公司);KQ-100型超声清洗器(昆山市超声…     

Disposable electrochemical biosensor with multiwalled carbon nanotubes-chitosan composite layer for the detection of deep DNA damage.

A novel electrochemical DNA-based biosensor for the detection of deep DNA damage was designed employing the bionanocomposite layer of multiwalled carbon nanotubes (MWNT) in chitosan (CHIT) deposited on a screen printed carbon electrode (SPCE). The biocomponent represented by double-stranded (ds) herring sperm DNA was immobilized on this composite using layer-by-layer coverage to form a robust film. Individual and complex electrode modifiers are characterized by a differential pulse voltammetry (DPV) with the DNA redox marker [Co(phen)(3)](3+), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) with [Fe(CN)(6)](3-) as a redox probe in a phosphate buffer solution (PBS). A good correlation between the CV and EIS parameters has been found, thus confirming a strong effect of MWNT on the enhancement of the electroconductivity of the electrode surface and that of CHIT on the MWNT distribution at the electrode surface. Differences between the CV and EIS signals of the electrodes without and with DNA are used to detect deep damage to DNA, advantageously using simple working procedures in the same experiment.     

基于PAMAM/聚2,6-吡啶二甲酸膜DNA电化学生物传感器的制备及对禽病毒基因检测的研究

以铂电极上聚合的2,6-吡啶二甲酸(PDC)膜组装G5.0树状高分子(PAMAM)固定ssDNA探针, 制备了一种新型的DNA电化学生物传感器. 用[Fe(CN)6]3－/4－作氧化还原指示剂, 以电化学交流阻抗和循环伏安技术对探针ssDNA的固定和杂交进行了表征. 实验表明, 当ssDNA在复合膜上固定及与其互补序列杂交后, 电极表面的传递电阻(Ret)依次增大. 因此, 可以利用Ret的明显差异, 以此固定探针的修饰电极, 对互补序列DNA进行无标记交流阻抗检测. 基于该生物传感器结合交流阻抗技术对禽病毒基因进行检测, 在优化实验条件下, 靶基因ssDNA-2在2.0×10－11～1.0×10－8 mol•L－1线性范围内, 其浓度与电极表面的电子传递电阻(Ret)之间呈良好的线性关系, 检测限为3.6×10－12 mol•L－1. 表明该方法为病毒灵敏地检测提供了一个有益的传感平台.     

硫醇在金电极上的SA单分子层膜的电化学研究

金基底上的硫醇自组装单分子层膜(Self-asembledmonolayers,SAMs)具有良好的稳定性和有序性,因此在基础研究及应用技术等领域都受到了广泛的重视^[1].通过电化学方法测定自组装膜对溶液中电活性物质的异向电子转移的阻碍作用.     

Adsorption and release behavior of bare and DNA-wrapped-carbon nanotubes on self-assembled monolayer surface

The adsorption and release behavior of single-stranded DNA-wrapped single-walled carbon nanotubes (ssDNA-w-SWCNTs) on alkylthiol self-assembled monolayer (SAM) surface was systematically characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Fast electron transfer between bare Au electrode and redox species blocked by the alkylthiol SAM can be restored by SWCNTs or ssDNA-w-SWCNTs. The release of ssDNA-w-SWCNTs is carried out by positive or negative desorption potential. SWCNTs/SAM or ssDNA-w-SWCNTs/SAM is completely removed from Au surface at +0.90 V or -1.40 V (vs. 3.0 M KCl|Ag|AgCl). The controlled release of SWCNTs/SAM and ssDNA-w-SWCNTs/SAM holds great promise for gene delivering.     

Determination of Paracetamol Based on 3-Amino-4H-1,2,4-triazole Coated Glassy Carbon Surface in Pharmaceutical Sample

In this present study, to determine paracetamol, an electroanalytical method is presented using differential pulse voltammetry (DPV) at 3-amino-4H-1,2,4-triazole (3AT) coated glassy carbon (GC) electrode. The electrochemical characterization and electron transfer behavior of this prepared electrode in the mixture of K₄[Fe(CN)₆]/K₃[Fe(CN)₆] contains 0.1 M KCl was confirmed by using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) methods. Furthermore, scanning electron microscopy (SEM) was used to observe morphological structures of the bare and modified surfaces. The effect of pH was studied on the redox reaction of paracetamol in phosphate buffer in the range of pH 3.0–9.0. The limit of detection was 0.043 μM (3 s/m) for 3AT-GC electrode. The developed electrode was successfully utilized in pharmaceutical samples.     

Multilayered construction of glucose oxidase on gold electrodes based on layer-by-layer covalent attachment

A feasible approach to construct multilayered enzyme film on the gold electrode surface for use as biosensing interface is described. The film was fabricated by alternate layer-by-layer deposition of periodate-oxidized glucose oxidase (GOx) and poly(allylamine) (PAA). The covalent attachment process was followed and confirmed by electrochemical impedance spectroscopy (EIS). X-ray diffraction (XRD) experiments revealed that the film was homogeneous and formed in an ordered manner with a thickness of 2.6 ± 0.1 nm per bilayer. The gold electrodes modified with the GOx/PAA multilayers showed excellent electrocatalytical response to the oxidation of glucose when ferrocenemethanol was used as an artificial redox mediator, which was studied by cyclic voltammetry (CV). From the analysis of voltammetric signals, the coverage of active enzyme on the electrode surface was estimated, which had a linear relationship with the number of GOx/PAA bilayers. This suggests that the analytical performance such as sensitivity, detection limit, and so on, is tunable by controlling the number of attached bilayers. The six GOx/PAA bilayer electrode exhibited a sensitivity of 15.1 μA mM⁻¹ cm⁻² with a detection limit of 3.8 × 10⁻⁶ M. In addition, the sensor exhibited good reproducibility and stability.     

Microwave Pyrolysis and Electrochemical Supercapacitor of S-doped g-C_3N_4 Nanoparticles

In this study, S-doped g-C_3N_4 nanoparticles were successfully prepared by one-step solid-state microwave synthesis. The detailed characterizations through XRD, FT-IR, SEM and XPS were studied. In addition, the electrochemical properties as supercapacitor of the sample were tested by cyclic voltammetry(CV), galvanostatic charge-discharge(GCD) and electrochemical impedance spectroscopy(EIS) techniques. The results showed a high specific capacitance of 691 F/g at current density of 4 A/g in 2 M KOH + 0.15 M K_3[Fe(CN)_6] electrolyte. This study shows that the microwave synthesis is a promising way to design carbon-based electrodes for supercapacitor.     

Asymmetrical Conductivity of TCNQ Modificd Au/Thiol-Lipid Bilayers in Fe(CN)_6~(3-/4-)solution

Duet0itssimilaritytobiomembraneinmicroenvironmentanditshighmechanicalstability,thesupportedlipidbilayerassemblyhasprovidedago0dmodelnot0nlytostudybiomembranes'-',butalsotodevelopbiomo1ecularelectronicdevices'=.Becausethealkanethi0lmonolayersongoldarecharacteristicoftheirhighstructureorder,compactnessandstability',recentinterestsinsupp0rtedbilayersf0cus0nth0secomp0sed0faselfassembledthi0lm0nolayerandaIipidm0noIayer.""-".Inthiswork,werep0rttheasymmetricalconductivityofAu/ODT-PCbilayerm0dified…     

膜电阻对自组装膜修饰电极电化学行为的影响

应用循环伏安和交流阻抗技术研究了 16烷基硫醇自组装膜修饰的金电极在Fe(CN) 63 - /Fe(CN) 64 - 溶液中的电化学行为 .无“针孔”缺陷的自组装膜对溶液与基底间的界面电子转移具有强烈的阻碍作用 ,当过电位较大时 ,In(I/ η)对 η1/2 之间具有良好的线性关系 .通过对Au/SAM /Hg模拟体系的电流———电压曲线进行测定 ,得到了自组装膜膜电阻的特征 .指出由于膜电阻的存在 ,自组装膜修饰电极在Fe(CN) 63 - /Fe(CN) 64 - 溶液中的行为实质上反映了膜自身的电阻特征