To determine the half-life for gemcitabine hydrochloride using microcalorimetry

The enthalpies of dissolution of gemcitabine hydrochloride in 0.9 % normal saline (medical) and citric acid solution were measured using a microcalorimeter at 309.65 K under atmospheric pressure. The differential enthalpy $ \left( {\Updelta_{\text{dif}} H_{\text{m}}^{{{\theta}}} } \right) $ and molar enthalpy $ \left( {\Updelta_{\text{sol}} H_{\text{m}}^{{{\theta}}} } \right) $ of dissolution were determined, respectively. The corresponding kinetic equation described the dissolution were elucidated to be da/dt = 10^?3.84(1 ? a)^0.92 and da/dt = 10^?3.80(1 ? a)^1.21. Besides, the half-life, $ \Updelta_{\text{sol}} H_{\text{m}}^{{{\theta}}} ,\;\Updelta_{\text{sol}} G_{\text{m}}^{{{\theta}}} $ and $ \Updelta_{\text{sol}} S_{\text{m}}^{{{\theta}}} $ of the dissolution were also obtained. Obviously, it will provide a simple and reliable method for the clinical application of gemcitabine hydrochloride.     

Kinetics investigation on the combustion of waste capsicum stalks in Western China using thermogravimetric analysis

The combustion kinetics of waste capsicum stalk (WCS) in Western China is investigated through thermogravimetric analysis compared with sawdust and coal, and co-combustion of WCS with coal is also investigated. Results show that the ignition characteristics of WCS is better than that of sawdust and coal, and the activation energy E of WCS-volatile combustion and WCS-char combustion are 78.55?kJ?mol^?1 and 44.59?kJ?mol^?1. However, integrating the characteristics of ignition and burnout, the combustion characteristic factor (S _N) of WCS is lower than that of sawdust. With the increasing in the heating rate, the ignition of WCS is delayed. Oxygen concentration $ C_{{{\text{O}}_{2} }} $ affects E and k ₀ of volatile combustion largely under rich-oxygen condition, when $ C_{{{\text{O}}_{2} }} $ increases from 0.2 to 0.8, E has increased threefold and k ₀ also intensively increases from 10⁶ to 10¹³?C10²². Oppositely, effect of $ C_{{{\text{O}}_{2} }} $ on the E and k ₀ of char combustion is little, and there is an exponential relationship $ S_{\text{N}} = 7. 1 2 8 \times 10^{ - 9} \times { \exp }(C_{{{\text{O}}_{2} }} /0. 3 6 8) - 6. 1 2 6 \times 10^{ - 9} $ between S _N and $ C_{{{\text{O}}_{2} }} $ . For the tests of co-combustion, all the experimental and weighted-average curves coincide well, and there is no remarkable synergistic effect. With the increase of mixing ratio that WCS added, E and k ₀ of volatile combustion increase, but correspondingly E and k ₀ of char combustion decrease.     

Effect of size of tetraalkylammonium counterions on the temperature dependent micellization of AOT in aqueous medium

Different tetraalkylammonium, viz. N⁺(CH₃)₄, N⁺(C₂H₅)₄, N⁺(C₃H₇)₄, N⁺(C₄H₉)₄ along with simple ammonium salts of bis (2-ethylhexyl) sulfosuccinic acid have been prepared by ion-exchange technique. The critical micelle concentration of surfactants with varied counterions have been determined by measuring surface tension and conductivity within the temperature range 283–313 K. Counterion ionization constant, α, and thermodynamic parameters for micellization process viz., $\Delta G_m^{\text{0}} $ , $\Delta H_m^{\text{0}} $ , and $\Delta S_m^{\text{0}} $ and also the surface parameters, Γ_max and A_min, in aqueous solution have been determined. Large negative $\Delta G_m^{\text{0}} $ of micellization for all the above counterions supports the spontaneity of micellization. The value of standard free energy, $\Delta G_m^{\text{0}} $ , for different counterions followed the order $${\text{N}}^{\text{ + }} \left( {{\text{CH}}_{\text{3}} } \right)_4 >{\text{NH}}_{\text{4}}^{\text{ + }} >{\text{Na}}^{\text{ + }} >{\text{N}}^{\text{ + }} \left( {{\text{C}}_{\text{2}} {\text{H}}_5 } \right)_{\text{4}} {\text{ $>$ N}}^{\text{ + }} \left( {{\text{C}}_{\text{3}} {\text{H}}_{\text{7}} } \right)_4 >{\text{N}}^{\text{ + }} \left( {{\text{C}}_{\text{4}} {\text{H}}_{\text{9}} } \right)_4 $$ , at a given temperature. This result can be well explained in terms of bulkiness and nature of hydration of the counterion together with hydrophobic and electrostatic interactions.     

Thermodynamic study of metal corrosion and inhibitor adsorption processes in copper/N-1-naphthylethylenediamine dihydrochloride monomethanolate/nitric acid system: part 2

N-1-Naphthylethylenediamine dihydrochloride monomethanolate (N-NEDHME) was tested as a corrosion inhibitor for copper in 2 M HNO₃ solution using the standard gravimetric technique at 303–343 K. N-NEDHME acts as an inhibitor for copper in an acidic medium. Inhibition efficiency increases with increase in concentration of N-NEDHME but decreases with a rise in temperature. Thermodynamic parameters such as adsorption heat ( $ \Updelta H_{\text{ads}}^\circ $ ), adsorption entropy ( $ \Updelta S_{\text{ads}}^\circ $ ) and adsorption free energy ( $ \Updelta G_{\text{ads}}^\circ $ ) were obtained from experimental data of the temperature studies of the inhibition process at five temperatures ranging from 303 to 343 K. Kinetic parameters activation such as $ E_{a} $ , $ \Updelta H_{\text{a}}^\circ $ , $ \Updelta S_{\text{a}}^\circ $ and pre-exponential factors have been calculated and are discussed. Adsorption of N-NEDHME on the copper surface in 2 M HNO₃ follows the Langmuir isotherm model.     

Theoretical study of N–H· · ·O hydrogen bonding properties and cooperativity effects in linear acetamide clusters

We investigated geometry, energy, ${\nu_{{\text{N--H}}}}$ harmonic frequencies, ¹⁴N nuclear quadrupole coupling tensors, and ${n_{\rm O}\to \sigma _{{\text{N--H}}}^\ast}$ charge transfer properties of (acetamide) _n clusters, with n = 1 ? 7, by means of second-order Møller-Plesset perturbation theory (MP2) and DFT method. Dependency of dimer stabilization energies and equilibrium geometries on various levels of theory was examined. B3LYP/6-311++G** calculations revealed that for acetamide clusters, the average hydrogen-bonding energy per monomer increases from ?26.85 kJ mol^?1 in dimer to ?35.12 kJ mol^?1 in heptamer; i.e., 31% cooperativity enhancement. The n-dependent trend of ${\nu_{{\text{N--H}}}\,{and}\,^{14}}$ N nuclear quadrupole coupling values were reasonably correlated with cooperative effects in ${r_{{\text{N--H}}}}$ bond distance. It was also found that intermolecular ${n_{\rm O}\to \sigma_{{\text{N--H}}}^\ast}$ charge transfer plays a key role in cooperative changes of geometry, binding energy, ${\nu_{{\text{N--H}}}}$ harmonic frequencies, and ¹⁴N electric field gradient tensors of acetamide clusters. There is a good linear correlation between ¹⁴N quadrupole coupling constants, C _Q (¹⁴N), and the strength of Fock matrix elements (F _ij ). Regarding the ${n_{\rm O}\to \sigma_{{\text{N--H}}}^\ast}$ interaction, the capability of the acetamide clusters for electron localization, at the N–H· · ·O bond critical point, depends on the cluster size and thereby leads to cooperative changes in the N–H· · ·O length and strength, N–H stretching frequencies, and ¹⁴N quadrupole coupling tensors.     

The dissolution properties of N-guanylurea-dinitramide (FOX-12) in dimethyl sulfoxide (DMSO)

The enthalpy of dissolution of FOX-12 in dimethyl sulfoxide (DMSO) was measured by means of a RD496-III Calvet microcalorimeter at 298.15 K. Empirical formulae for the calculation of the enthalpy of dissolution ( $ \Updelta_{\text{diss}} H $ ), relative partial molar enthalpy ( $ \Updelta_{\text{diss}} H_{\text{partial}} $ ), and relative apparent molar enthalpy ( $ \Updelta_{\text{diss}} H_{\text{apparent}} $ ) were obtained from the experimental data of the enthalpies of dissolution of FOX-12 in DMSO. The kinetic equation that describes the dissolution process of FOX-12 in DMSO at 298.15 K is determined as $ \frac{{{\text{d}}\alpha }}{{{\text{d}}t}} = 8.5 \times 10^{ - 3} (1 - \alpha )^{0.59} $ .     

A thermodynamic study of complexation of 18-crown-6 with Zn2+, Tl+, Hg2+ and {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} cations in acetonitrile-dimethylformamide binary media and study the effect of anion on the stability constant of (18C6-Na+) complex in methanol solutions

The equilibrium constants and thermodynamic parameters for complex formation of 18-crown-6(18C6) with Zn²⁺, Tl⁺, Hg²⁺ and $ {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} $ cations have been determined by conductivity measurements in acetonitrile(AN)-dimethylformamide(DMF) binary solutions. 18-crown-6 forms 1:1 complexes [M:L] with Zn²⁺, Hg²⁺ and $ {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} $ cations, but in the case of Tl⁺ cation, a 1:2 [M:L₂] complex is formed in most binary solutions. The thermodynamic parameters ( $ \Delta {\text{H}}^{ \circ }_{{\text{c}}} $ and $ \Delta {\text{S}}^{ \circ }_{{\text{c}}} $ ) which were obtained from temperature dependence of the equilibrium constants show that in most cases, the complexes are enthalpy destabilized but entropy stabilized and a non-monotonic behaviour is observed for variations of standard enthalpy and entropy changes versus the composition of AN/DMF binary mixed solvents. The obtained results show that the order of selectivity of 18C6 ligand for these cations changes with the composition of the mixed solvent. A non-linear relationship was observed between the stability constants (logK_f) of these complexes with the composition of AN/DMF binary solutions. The influence of the $ {\text{ClO}}^{ - }_{{\text{4}}} $ , $ {\text{NO}}^{ - }_{{\text{3}}} $ and $ {\text{Cl}}^{ - } $ anions on the stability constant of (18C6-Na⁺) complex in methanol (MeOH) solutions was also studied by potentiometry method. The results show that the stability of (18C6-Na⁺) complex in the presence of the anions increases in order: $ {\text{ClO}}^{ - }_{{\text{4}}} $  >  $ {\text{NO}}^{ - }_{{\text{3}}} $  >  $ {\text{Cl}}^{ - } $ .     

Experimental and DFT study on complexation of Eu3+ with a macrocyclic lactam receptor

From extraction experiments and $ \gamma $ -activity measurements, the extraction constant corresponding to the equilibrium $ {\text{Eu}}^{ 3+ } \left( {\text{aq}} \right) + 3 {\text{A}}^{ - } \left( {\text{aq}} \right) + {\mathbf{1}}\left( {\text{nb}} \right) \Leftrightarrow {\mathbf{1}} \cdot {\text{Eu}}^{ 3+ } \left( {\text{nb}} \right) + 3 {\text{A}}^{ - } \left( {\text{nb}} \right) $ taking place in the two-phase water–nitrobenzene system ( $ {\text{A}}^{ - } = \text {CF}_{3} \text{SO}_{3}^{ - } $ ; 1 = macrocyclic lactam receptor—see Scheme 1; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as $ { \log } K_{{{\text{ex}} }} ({\mathbf{1}} \cdot {\text{Eu}}^{ 3+ } ,{\text{ 3A}}^{ - } )\; = \; - 4. 9 \pm 0. 1 $ . Further, the stability constant of the 1·Eu³⁺ cationic complex in nitrobenzene saturated with water was calculated for a temperature of 25 °C: $ { \log } \beta_{{{\text{nb}} }} ({\mathbf{1}} \cdot {\text{Eu}}^{ 3+ } ) \; = \; 8. 2 \pm 0. 1 $ . Finally, using DFT calculations, the most probable structure of the cationic complex species 1·Eu³⁺ was derived. In the resulting 1·Eu³⁺ complex, the “central” cation Eu³⁺ is bound by five bond interactions to two ethereal oxygen atoms and two carbonyl oxygens, as well as to one carbon atom of the corresponding benzene ring of the parent macrocyclic lactam receptor 1 via cation-π interaction.

Dissociation Enthalpies and Thermodynamic Constants of Sildenafil Citrate by the Regression of Multiwavelength pH-spectrophotometric Titration Data

pH-spectrophotometric titration data were used to determine the mixed dissociation constants of sildenafil citrate at different ionic strengths I at temperatures of 288.15, 298.15 and 310.15?K, with the use of two different multiwavelength and multivariate treatments of spectral data, SPECFIT32 and SQUAD(84) nonlinear regression analyses, and INDICES factor analysis. The reliability of the dissociation constants of this drug was proven with goodness-of-fit tests of the pH-spectra. The thermodynamic dissociation constants $ {\text{p}}K_{{{\text{a}},i}}^{\text{T}} $ were estimated by a nonlinear regression of (pK _a , I) data using the Debye-Hückel equation: $ {\text{p}}K_{{{\text{a}}, 1}}^{\text{T}} $ ?=?2.79 (1), 3.03 (3) and 3.53 (1); $ {\text{p}}K_{{{\text{a}}, 2}}^{\text{T}} $ ?=?4.97 (2), 5.23 (2) and 5.34 (1); $ {\text{p}}K_{{{\text{a}}, 3}}^{\text{T}} $ ?=?8.14 (2), 7.93 (1) and 7.47 (1); $ {\text{p}}K_{{{\text{a}}, 4}}^{\text{T}} $ ?=?9.47 (2), 9.30 (1) and 9.13 (4); and $ {\text{p}}K_{{{\text{a}}, 5}}^{\text{T}} $ ?=?10.73 (5), 10.75 (3) and 10.79 (5) at T?=?288.15, 298.15 and 310.15?K, respectively, where the numbers in parentheses are the standard deviations in the last significant digits. Concurrently, the experimentally determined five thermodynamic dissociation constants are in a good agreement with their computational prediction of the SPARC program based on knowledge of the chemical structures. The factor analysis of spectra in the INDICES program predicts the correct number of light-absorbing components when the instrumental error is known and when the signal-to-error ratio SER is higher than 10. A rough estimation of the dissociation enthalpies ??H ⁰ (kJ·mol^?1) and entropies ??S ⁰ (J·K^?1·mol^?1) has been obtained from the temperature variation of the thermodynamic dissociation constants by means of the van??t Hoff equation.     

Density functional theoretical study of A series of pentazolide compounds \hbox{A}_{\it n}(\hbox{N}_5)_{\rm 6-{\it n}}^{\it q} (A = B, Al, Si, P, and S; n = 1–3; q = +1, 0, −1, −2, and −3)

The structure and the stability of pentazolide compounds $\hbox{A}_{\it n}(\hbox{N}_5)_{\rm 6-{\it n}}^{\it q}$ (A = B, Al, Si, P, and S; n= 1–3; q = +1, 0, ?1, ?2, and ?3), as high energy-density materials (HEDMs), have been investigated at the B3LYP/6-311+G* level of theory. The natural bond orbital analysis shows that the charge transfer plays an important role when the $\hbox{A}_{\it n}(\hbox{N}_5)_{\rm 6-{\it n}}^{\it q}$ species are decomposed to $\hbox{A}_{\it n}(\hbox{N}_5)_{\rm 5-{\it n}}\hbox{N}_3^{\it q}$ and N₂. The more negative charges are transferred from the N₂ molecule after breaking the N₅ ring, the more stable the systems are with respect to the decomposition. Moreover, the conclusion can be drawn that ${\hbox{Al}(\hbox{N}_5)_5^{2-}}$ and ${\hbox{Al}_2(\hbox{N}_5)_4^{2-}}$ are predicted to be suitable as potential HEDMs.     

Chemical Transfer Energies of Some Homologous Amino Acids and the –CH2– Group in Aqueous DMF: Solvent Effect on Hydrophobic Hydration and Three Dimensional Solvent Structure

Standard transfer Gibbs energies, $ \Updelta_{\text{tr}} G^{^\circ } $ , of a series of homologues α-amino acids have been evaluated by determining the solubility of glycine, alanine, amino butyric acid and norvaline gravimetrically at 298.15 K. Standard entropies of transfer, $ \Updelta_{\text{tr}} S^{^\circ } $ , of the amino acids have also been evaluated by extending the solubility measurement to five equidistant temperatures ranging from 288.15 to 308.15 K. The chemical contributions $ \Updelta_{\text{tr,ch}} G^{^\circ } (i) $ of α-amino acids, as obtained by subtracting theoretically computed contributions to $ \Updelta_{\text{tr}} G^{ \circ } $ due to cavity and dipole–dipole interaction effects from the corresponding experimental $ \Updelta_{\text{tr}} G^{ \circ } $ , are indicative of the superimposed effect of increased basicity and dispersion and decreased hydrophobic hydration (hbh) in DMF–water solvent mixtures as compared to those in water, while, in addition, $ T\Updelta_{\text{tr,ch}} S^{^\circ } (i) $ is guided by structural effects. The computed chemical transfer energies of the –CH₂– group, $ \Updelta_{\text{tr,ch}} P^{^\circ } $ (–CH₂–) [P = G or S] as obtained by subtracting the value of lower homologue from that of immediately higher homologue, are found to change with composition indicating involvement of several opposing factors in the calculation of the chemical interactions. The $ \Updelta_{\text{tr,ch}} G^{^\circ } $ (–CH₂–) values are found to be guided by the decreased hydrophobic effect in DMF–water mixtures, and are indicative of the nature of the three dimensional structure of the aquo-organic solvent system around each solute.     

Spectroscopic Studies on the Thermodynamics of the Complexation of Trivalent Curium with Propionate in the Temperature Range from 20 to 90 °C

The thermodynamics of the stepwise complexation reaction of Cm(III) with propionate was studied by time resolved laser fluorescence spectroscopy (TRLFS) and UV/Vis absorption spectroscopy as a function of the ligand concentration, the ionic strength and temperature (20–90 °C). The molar fractions of the 1:1 and 1:2 complexes were quantified by peak deconvolution of the emission spectra at each temperature, yielding the log₁₀ $ K_{n}^{\prime } $ values. Using the specific ion interaction theory (SIT), the thermodynamic stability constants log₁₀ $ K_{n}^{0} (T) $ were determined. The log₁₀ $ K_{n}^{0} (T) $ values show a distinct increase by 0.15 (n = 1) and 1.0 (n = 2) orders of magnitude in the studied temperature range, respectively. The temperature dependency of the log₁₀ $ K_{n}^{0} (T) $ values is well described by the integrated van’t Hoff equation, assuming a constant enthalpy of reaction and $ \Updelta_{\text{r}} C^\circ_{{p,{\text{m}}}} = 0, $ yielding the thermodynamic standard state $ \left( {\Updelta_{\text{r}} H^\circ_{\text{m}} ,\Updelta_{\text{r}} S^\circ_{\text{m}} ,\Updelta_{\text{r}} G^\circ_{\text{m}} } \right) $ values for the formation of the $ {\text{Cm(Prop)}}_{n}^{3 - n} $ , n = (1, 2) species.     

Molecular Interactions in 1-Ethyl-3-Methylimidazolim Tetrafluoroborate + Amide Mixtures: Excess Molar Volumes, Excess Isentropic Compressibilities and Excess Molar Enthalpies

The densities, ρ ₁₂, and speeds of sound, u ₁₂, of 1-ethyl-3-methylimidazolium tetrafluoroborate (1) + N-methylformamide or N,N-dimethylformamide (2) binary mixtures at (293.15. 298.15. 303.15, 308.15 K), and excess molar enthalpies, $ H_{12}^{\text{E}} $ H 12 E , of the same mixtures at 298.15 K have been measured over the entire mole fraction range using a density and sound analyzer (Anton Paar DSA-5000) and a 2-drop microcalorimeter, respectively. Excess molar volume, $ V_{12}^{\text{E}} $ V 12 E , and excess isentropic compressibility, $ \left( {\kappa_{S}^{\text{E}} } \right)_{12} $ ( κ S E ) 12 , values have been calculated by utilizing the measured density and speed of sound data. The observed data have been analyzed in terms of: (i) Graph theory and (ii) the Prigogine–Flory–Patterson theory. Analysis of the $ V_{12}^{\text{E}} $ V 12 E data in terms of Graph theory suggest that: (i) in pure 1-ethyl-3-methylimidazolium tetrafluoroborate, the tetrafluoroborate anion is positioned over the imidazoliun ring and there are interactions between the hydrogen atom of (C–H{edge}) and proton of the –CH₃ group (imidazolium ring) with fluorine atoms of tetrafluoroborate anion, and (ii) (1 + 2) mixtures are characterized by ion–dipole interactions to form a 1:1 molecular complex. Further, the $ V_{12}^{\text{E}} $ V 12 E , $ H_{12}^{\text{E}} $ H 12 E and $ \left( {\kappa_{S}^{\text{E}} } \right)_{12} $ ( κ S E ) 12 values determined from Graph theory compare well with their measured experimental data.     

Thermodynamic behavior of complexation process between benzo-15-crown-5 with Li+, Na+, K+, and NH4 + cations in acetonitrile–methanol binary media

The stability constants of 1:1 (M:L) complexes of benzo-15-crown-5 (B15C5) with Li⁺, Na⁺, K⁺ and NH₄ ⁺ cations, the Gibbs standard free energies ( $ \Updelta {\text{G}}_{\text{c}}^{ \circ } $ ), the standard enthalpy changes ( $ \Updelta {\text{H}}_{\text{c}}^{ \circ } $ ) and standard entropy changes ( $ \Updelta {\text{S}}_{\text{c}}^{ \circ } $ ) for formation of these complexes in acetonitrile–methanol (AN–MeOH) binary mixtures have been determined conductometrically. The conductance data show that the stoichiometry of the complexes formed between the macrocyclic ligand and the studied cations is 1:1 (M:L). In most cases, addition of B15C5 to solutions of these cations, causes a continuous increase in the molar conductivities which indicates that the mobility of complexed cations is more than the uncomplexed ones. The stability constants of the complexes were obtained from fitting of molar conductivity curves using a computer program, GENPLOT. The results show that the selectivity order of B15C5 for the metal cations changes with the nature and composition of the binary mixed solvent. The values of standard enthalpy changes ( $ \Updelta {\text{H}}_{\text{c}}^{ \circ } $ ) for complexation reactions were obtained from the slope of the van’t Hoff plots and the changes in standard entropy ( $ \Updelta {\text{S}}_{\text{c}}^{ \circ } $ ) were calculated from the relationship $ \Updelta {\text{G}}_{{{\text{c}},298.15}}^{ \circ } = \Updelta {\text{H}}_{\text{c}}^{ \circ } - 298.15\Updelta {\text{S}}_{\text{c}}^{ \circ } $ . A non-linear behavior was observed between the stability constants (log K_f) of the complexes and the composition of the acetonitrile–methanol (AN–MeOH) binary solution. The results obtained in this study, show that in most cases, the complexes formed between B15C5 and Li⁺, Na⁺, K⁺ and NH₄ ⁺ cations are both enthalpy and entropy stabilized and the values of these thermodynamic quantities change with the composition of the binary solution.     

Thermochemical Properties of n-Undecylammonium Bromide Monohydrate C11H28BrNO(s)

The crystal structure of n-undecylammonium bromide monohydrate was determined by X-ray crystallography. The crystal system of the compound is monoclinic, and the space group is P2₁/c. Molar enthalpies of dissolution of the compound at different concentrations m/(mol·kg^?1) were measured with an isoperibol solution–reaction calorimeter at T = 298.15 K. According to the Pitzer’s electrolyte solution model, the molar enthalpy of dissolution of the compound at infinite dilution ( $ \Updelta_{\text{sol}} H_{\text{m}}^{\infty } $ ) and Pitzer parameters ( $ \beta_{\text{MX}}^{(0)L} $ and $ \beta_{\text{MX}}^{(1)L} $ ) were obtained. Values of the apparent relative molar enthalpies ( $ {}^{\Upphi }L $ ) of the title compound and relative partial molar enthalpies ( $ \bar{L}_{2} $ and $ \bar{L}_{1} $ ) of the solute and the solvent at different concentrations were derived from experimental values of the enthalpies of dissolution.     

Densities and Volumetric Properties of Butyl Acrylate + 1-Butanol, or +2-Butanol, or +2-Methyl-1-propanol, or +2-Methyl-2-propanol Binary Mixtures at Temperatures from 288.15 to 318.15 K

The densities, ρ, of binary mixtures of butyl acrylate with 1-butanol, 2-butanol, 2-methyl-1-propanol, and 2-methyl-2-propanol, including those of the pure liquids, were measured over the entire composition range at temperatures of (288.15, 293.15, 298.15, 303.15, 308.15, 313.15, and 318.15) K and atmospheric pressure. From the experimental data, the excess molar volume $ V_{\text{m}}^{\text{E}} $ V m E , partial molar volumes $ \overline{V}_{\text{m,1}} $ V ¯ m,1 and $ \overline{V}_{\text{m,2}} $ V ¯ m,2 , and excess partial molar volumes $ \overline{V}_{\text{m,1}}^{\text{E}} $ V ¯ m,1 E and $ \overline{V}_{\text{m,2}}^{\text{E}} $ V ¯ m,2 E , were calculated over the whole composition range as were the partial molar volumes $ \overline{V}_{\text{m,1}}^{^\circ } $ V ¯ m,1 ° and $ \overline{V}_{\text{m,2}}^{^\circ } $ V ¯ m,2 ° , and excess partial molar volumes $ \overline{V}_{\text{m,1}}^{{^\circ {\text{E}}}} $ V ¯ m,1 ° E and $ \overline{V}_{\text{m,2}}^{{^\circ {\text{E}}}} $ V ¯ m,2 ° E , at infinite dilution,. The $ V_{\text{m}}^{\text{E}} $ V m E values were found to be positive over the whole composition range for all the mixtures and at each temperature studied, indicating the presence of weak (non-specific) interactions between butyl acrylate and alkanol molecules. The deviations in $ V_{\text{m}}^{\text{E}} $ V m E values follow the order: 1-butanol < 2-butanol < 2-methyl-1-propanol < 2-methyl-2-propanol. It is observed that the $ V_{\text{m}}^{\text{E}} $ V m E values depend upon the position of alkyl groups in alkanol molecules and the interactions between butyl acrylate and isomeric butanols decrease with increase in the number of alkyl groups at α-carbon atom in the alkanol molecules.     

Specific heat capacity and thermodynamic properties of CuTeO3 and HgTeO3

Tellurites of CuTeO₃ and HgTeO₃ are synthesized and their specific molar heat capacities are experimentally determined for the first time. The tellurites discussed in the present paper are used for preparation of optical glasses with special properties for optoelectronics, nuclear and power industries. The tellurites synthesized are prepared for chemical analysis, differential thermal analysis and X-ray analysis. The use of the tellurites studied is related to knowing their thermodynamic properties like specific molar heat capacity (C _p,m), enthalpy \( \left( {\Delta_{{{\text {T}}^{\prime}}}^{\text{T}} H_{\text{m}}^{0} } \right), \) entropy \( \left( {\Delta_{{{\text {T}}^{\prime}}}^{\text{T}} S_{\text{m}}^{0} } \right) \) and Gibbs energy \( \left( { - \Delta_{{{\text {T}}^{\prime}}}^{\text{T}} G_{\text{m}}^{0} } \right) \) . The temperature dependences of their molar heat capacities are determined using the least squares method. The thermodynamic properties are calculated: entropy, enthalpy and Gibbs function.     

Computer-aided cooling curve thermal analysis of near eutectic Al–Si–Cu–Fe alloy

The effects of bismuth (Bi), antimony (Sb) and strontium (Sr) additions on the characteristic parameters of the evolution of aluminium dendrites in a near eutectic Al–11.3Si–2Cu–0.4Fe alloy during solidification at different cooling rates (0.6–2 °C) were investigated by computer-aided cooling curve thermal analysis (CA-CCTA). Nucleation temperature ( $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} $ ) is defined with a new approach based on second derivative cooling curve. The results showed that $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} $ increased with increasing cooling rate but both the growth temperature ( $ T_{\text{G}}^{{\alpha {\text{ - Al}}}} $ ) and the coherency temperature (T _DCP) decreased. Increase in the temperature difference for dendrite coherency ( $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} - T_{\text{DCP}} $ ) with increasing cooling rate indicate a wider range of temperature before the dendrite can impinge on each other and higher fraction solid ( $ f_{\text{S}}^{\text{DCP}} $ ). Additions of Bi, Sb and Sr to the base alloy produced only a minor effect on $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} $ . Additions of Bi and Sb resulted in an increase in fraction solid and an increase of 30 % in the value of $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} \, - \,T_{\text{G}}^{{\alpha {\text{ - Al}}}} $ to almost 13 °C.     

Pre-formulation of an oral cyclosporine free of surfactant

The purpose of this study was to develop a new oral cyclosporine A (CsA) formulation free of surfactant cremophor using cyclodextrin terpolymers (P-αβ-CD, P-βγ-CD and P-αγ-CD) as excipients in attempt to enhance its stability, dissolution rate and eliminate surfactant side effects. Two spray-dried dispersions (SDDs) containing poorly water-soluble CsA were prepared with either P-αβ-CD, P-βγ-CD or P-αγ-CD using water ( $ F_{{{\text{H}}_{2} {\text{O}}}} $ ) and ethanol (F _EOH) via spray-drying technique and characterized by scanning electron microscopy, powder X-ray diffraction, particle size distribution, circular dichroism (CD) and nuclear magnetic resonance along with the dissolution study which was compared to Neoral^® and Sandimmune^®. The results showed an interaction between CsA and P-αβ-CD, P-βγ-CD and P-αγ-CD without secondary structure change of CsA. The order of the CsA release from the terpolymers was ranked as follows: P-αγ-CD/CsA ( $ F_{{{\text{H}}_{2} {\text{O}}}} $ ) = Neoral^® > P-βγ-CD/CsA ( $ F_{{{\text{H}}_{2} {\text{O}}}} $ ) > P-αβ-CD/CsA ( $ F_{{{\text{H}}_{2} {\text{O}}}} $ ) > P-αγ-CD/CsA (F _EOH) > Sandimmune^® > P-αβ-CD/CsA (F _EOH) > P-βγ-CD/CsA (F _EOH). The results of ( $ F_{{{\text{H}}_{2} {\text{O}}}} $ ) could be explained by hydrophilisation and absence of crystallinity of CsA while maintaining part of its crystallinity in the case of formulations (F _EOH). In summary, developed SDD formulations P-αγ-CD/CsA ( $ F_{{{\text{H}}_{2} {\text{O}}}} $ ) revealed same dissolution profile as Neoral^® and better than Sandimmune^®. These systems seem to be stable to carry cyclosporine and release it, while preserving structure and thus, potentially, also maintaining cyclosporine activity.