CCD胶片点阵信息判读技术

本文论述了一种判读胶片点阵信息的新技术.CCD点阵信息判读技术采用面阵CCD实时采集点阵图象,并结合数字图系处理技术,使点阵判读达到了通用性强、误码率低、处理速度高的水平,同时系统结构简单、成本低.本文在分析CCD图象处理系统原理的基础上,重点讲述了点阵图象的处理方法.     

利用简易黑度计测量光谱波长

本文提出一种测量光谱黑度波长的简单方法。介绍了简易黑度计的制作原理，并表明该黑度计可以满足一般摄谱仪的要求。     

X射线衍射和倒易点阵

X射线衍射和倒易点阵概念抽象,是学习的难点,X射线衍射分析的理论基础是倒易点阵,倒易点阵构建的基础是X射线衍射,两者互为基础.然而,大部分教科书中X射线衍射和倒易点阵都是分开讲解,更是给学习理解带来了困难,本文系统介绍了X射线衍射原理,并基于X射线衍射引出倒易点阵,将X射线衍射和倒易点阵统一讲解,使学习理解更加容易.     

位错环与点阵空位间的弹性相互作用

本文分析了点阵空位的弹性模型,给出点阵空位与任意内应力系统的相互作用能量普遍表达式。作为一个物理上有意义的例子,推导了棱柱位错环与点阵空位弹性相互作用能量的具体表达式。给出了关于铝中位错环的数值结果,并对结果进行了讨论。     

SU(2)纯格点规范场热力学非对称点阵Monte-Carlo模拟

在非对称点阵(ξ=2,3)上模拟了SU(2)纯格点规范场系统的热力学行为,结果表明,非对称点阵Monte-Carlo模拟是实现快速趋向连续物理极限的有效途径.     

循环流化床锅炉火焰温度及黑度图像检测

本文在图像处理技术的基础上提出了一种改进的比色法.对于充满颗粒介质的燃烧过程,该方法可从一个彩色CCD图像中获得介质温度和黑度图像.本方法不依赖于CCD的光谱特性及其三基色代表性波长,也不依赖于图像处理系统.在一台480 t/h燃煤循环流化床锅炉上进行了试验.与热电偶测量结果相比,使用本方法测量温度是可行的,而且其与锅炉负荷的相关性也是明显的.使用本系统得到的火焰黑度可以做进一步的研究.     

物体的黑度和吸收比不是等同的

物体的黑度和吸收比不是等同的浙江林学院刘德祖在大学物理教学中对物体的黑度和吸收比一般不作较为深人讨论，常产生一些误解．例如，认为物体的吸收比就是它的黑度；实际物体是灰体；气体是完全透明体等．有鉴于此，本文较详细地讨论物体黑度和吸收比，以及黑体、灰体和...     

三维随机点阵三态矢量Potts模型Monte Carlo模拟

在三维随机格点阵上对三态矢量Potts模型进行了Monte Carlo数值模拟,构造了N×N×N(N=8,10,12)三种不同大小点阵,分别计算了该自旋系统的能量密度、磁化强度、比热和磁化率等的温度曲线。结果表明该自旋系统在β₆≈0.16处存在着能表征一阶Z(3)对称破缺相变的能量热滞图和比热陡峰,磁化强度的跃变规律亦支持该结论,从而显示出该模型在随机点阵上的相变行为与正方点阵的已有结果的相似性。     

光谱黑度计的设计

利用常用的X－Y函数记录仪和一些简单的装置制作光谱黑度计，可以绘出光谱的黑度曲线并能精确地测出谱线波长．     

点阵全息图衍射效率的测量

提出了测量点阵全息图衍射效率的测试方法和相应的光学系统,其优点在于巧妙让零级与正负二级不能进入聚光系统,只有正负一级可以被记录,并且这种测试方法不受被测点干涉条纹方向变化的影响。并给了几种点阵全息防伪标识的测试结果。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.