Cilostazol determination by the enhancement of the green emission of Tb3+ optical sensor

The efficiency of excited-state interaction between Tb³⁺ and the industrial product Cilostazol (CIL) has been studied in different solvents. High luminescence intensity peak at 545 nm of terbium complex in acetonitrile was obtained. The photophysical properties of the green emissive Tb³⁺ complex have been elucidated, the terbium was used as optical sensor for the assessment of CIL in the pharmaceutical tablets and body fluids at pH 3.1 and λ_ex = 320 nm with a concentration range 1.0 × 10⁻⁹–1.0 × 10⁻⁶ mol L⁻¹ of CIL, correlation coefficient of 0.998 and detection limit of 7.5 × 10⁻¹⁰ mol L⁻¹.     

An ionic liquid-type multiwall carbon nanotubes paste electrode for electrochemical investigation and determination of morphine

The direct electrochemistry of morphine on modified multiwall carbon nanotubes using carbon ionic liquid (i.e., 1-butyl-3-methylimidazolium hexafluoro phosphate, ([C4mim]–[PF6])) was studied. It was found that the electrode showed sensitive voltammetric response to morphine. The experimental results suggested that the modified electrode promoted electron transfer reaction for the oxidation of morphine. The electron transfer coefficient and charge transfer resistant (R _ct) of morphine at the modified electrode were calculated. Under the optimized conditions at pH 8.0, the peak current was linear to morphine concentrations over the concentration range of 0.45–450 μmol L⁻¹, using differential pulse voltammetry. The detection limit was 0.14 μmol L⁻¹. The proposed method was successfully applied to the determination of morphine in both ampoules and urine samples.     

Spectrofluorimetric Determination of Coumarin in Commercial Tablets

A simple, rapid and effective analytical method based on fluorescence spectroscopy for the determination of coumarin in pharmaceutical formulations without pre-treatment or pre-concentration step was development. Coumarin had maximum excitation and emission at 310 nm and 390 nm, respectively. Optimum conditions for the detection of coumarin were investigated. Under optimized conditions, we observed a linear behavior for the sign of coumarin in the concentration range of 2.5 × 10⁻⁶ to 1.0 × 10⁻⁴ mol L⁻¹, with linearity of 0.998 and sensitivity of 2.9 × 10¹⁰ u.a/mol L⁻¹. The proposed method was validated in terms of accuracy, precision and specificity of coumarin using the standard addition and external calibration. It was noted that the results support (P < 0.05), indicating that the matrices were not an interference in the determination of coumarin by fluorescence spectroscopy. The results were favorable compared with those obtained by reference chromatographic methods.     

Spectrofluorimetric Assessment of Hydrochlorothiazide Using Optical Sensor Nano-Composite Terbium Ion Doped in Sol-Gel Matrix

A new, simple, sensitive and selective spectrofluorimetric method for the determination of Hydrochlorothiazide was developed in acetonitrile at pH 6.2. The Hydrochlorothiazide can remarkably enhance the luminescence intensity of the Tb³⁺ ion doped in sol–gel matrix at λ_ex = 370 nm. The intensity of the emission band of Tb³⁺ ion doped in sol–gel matrix was increased due to the energy transfer from the triplet excited state of Hydrochlorothiazide to (⁵D₄) excited energy state of Tb³ ion. The enhancement of the emission band of Tb³⁺ ion doped in sol–gel matrix at (⁵D₄→⁷ F₅) 545 nm was directly proportion to the concentration of Hydrochlorothiazide with a dynamic ranges of 5.0 × 10⁻¹⁰—5.0 × 10⁻⁶ mol L⁻¹ and detection limit of 2.2 × 10⁻¹¹ mol L⁻¹.     

Study of Enhanced Chemiluminescence of Diperiodatocuprate (III) on 1,10-Phenanthroline/Hydrogen Peroxide/Cetyltrimethylammonium Bromide System

In the paper, a chemiluminescence (CL) system was developed based on the catalytical effect of diperiodatocuprate (III) (DPC) on the 1,10-phenanthroline (phen)/hydrogen peroxide (H₂O₂) in the presence of cetyltrimethylammonium bromide (CTAB). The effects of experimental conditions were investigated. Meanwhile the increase of CL intensity of the DPC/phen/H₂O₂/CTAB system is proportional to the concentration of phen in the range of low concentration. The linear range of the calibration curve is 5.0 × 10⁻⁹–1.0 × 10⁻⁶ mol L⁻¹, and the corresponding detection limit is 1.9 × 10⁻⁹ mol L⁻¹. The effects of phenolic compounds (PCs) on the system were investigated. Hydroquinone was used as an example to investigate the application of the CL system to the determination of PCs. The quenched CL intensity is linearly related to the logarithm of concentration of hydroquinone. The linear range of the calibration curve is 2.5 × 10⁻⁹–1.0 × 10⁻⁵ g mL⁻¹, and the corresponding detection limit is 1.8 × 10⁻⁹ g mL⁻¹. This phen and hydroquinone can be synchronously determined. The method was applied to the determination of hydroquinone in water samples and the recoveries were from 92% to 106%.     

Fluorescent Method for the Determination of Sulfide Anion with ZnS:Mn Quantum Dots

Water-soluble Mn²⁺-doped ZnS quantum dots (QDs) were prepared using mercaptoacetic acid as the stabilizer. The optical properties and structure features were characterized by X-Ray, absorption spectrum, IR spectrum and fluorescence spectrum. In pH 7.8 Tris-HCl buffer, the QDs emitted strong fluorescence peaked at 590 nm with excitation wavelength at 300 nm. The presence of sulfide anion resulted in the quenching of fluorescence and the intensity decrease was proportional to the S²⁻ concentration. The linear range was from 2.5 × 10⁻⁶ to 3.8 × 10⁻⁵ mol L⁻¹ with detection limit as 1.5 × 10⁻⁷ mol L⁻¹. Most anions such as F⁻, Cl⁻, Br⁻, I⁻, CH₃CO₂ ⁻, ClO₄ ⁻, CO₃ ²⁻, NO₂ ⁻, NO₃ ⁻, S₂O₃ ²⁻, SO₃ ²⁻ and SO₄ ²⁻ did not interfere with the determination. Thus a highly selective assay was proposed and applied to the determination of S²⁻ in discharged water with the recovery of ca. 103%.     

Study on the Binding Behavior of Lysozyme with Cephalosporin Analogues by Fluorescence Spectroscopy

It was first found that the intrinsic fluorescence of lysozyme at 340 nm can be quenched by cephalosporin analogues through the static quenching and non-radiative energy transferring procedure. In the acetate buffer solution with pH 7.0 and 298 K, the quenching fluorescence intensity was in a good linearity over the concentration of drugs in the range of 1–100 μmol L⁻¹, 0.1–100 μmol L⁻¹, 0.5–100 μmol L⁻¹ and 0.05–100 μmol L⁻¹ for cefradine, cefuroxime, cefotaxime and ceftriaxone, respectively. The quenching ability or the binding ability of the studied drugs followed the pattern: ceftriaxone > cefotaxime > cefuroxime > cefradine, which was close to the order of their antibacterial ability. The binding parameters including the association constant and the number of binding potential point were calculated at different temperatures (288, 298 and 308 K), and thermodynamic parameters ΔH°, ΔS° and ΔG° were given. The binding mode of lysozyme with cephalosporins showed that the hydrophobic effect might play a major role. The binding distance between cephalosporin and tryptophan residue in lysozyme was obtained. The results provided the quantitative information for the binding of cephalosporin to lysozyme, and it was suggested that the drugs probably bound to the active site near Trp62 in lysozyme.     

Fluorescence and electrochemical recognition of nucleosides and DNA by a novel luminescent bioprobe Eu(III)-TNB

The luminescence arising from lanthanide cations offers several advantages over organic fluorescent molecules: sharp, distinctive emission bands allow for easy resolution between multiple lanthanide signals; long emission lifetimes (μs –ms) make them excellent candidates for time-resolved measurements; and high resistance to photo bleaching allow for long or repeated experiments. A method is presented for determination of nucleosides using the effect of enhancement of fluorescence of the easily accessible europium(III)-TNB in presence of different nucleosides. The latter coordinates to Eu(III) -TNB and enhances its luminescence intensity as a result of the displacement of water from the inner coordination sphere of the central metal. A similar method for the determination of DNA based on the quenching of Eu(III)-TNB has been established. The interaction of Eu(III)-4,4,4 trifluoro-1-(2-naphthyl)1,3-butanedione (TNB) complex with nucleosides (NS) (guanosine, adenosine, cytidine , inosine) and DNA has been studied using normal and time-resolved luminescence techniques. Binding constants were determined at 293 K, 298 K, 303 K, 308 K and 313 K by using Benesi-Hildebrand equation. A thermodynamic analysis showed that the reaction is spontaneous with ΔG being negative. The enthalpy ΔH and the entropy ΔS of reactions were all determined. The formation of binary and ternary complexes of Eu (III) with nucleosides and TNB has been studied potentiometrically at (25.0 ± 0.1) °C and ionic strength I = 0.1 mol.dm⁻³ (KNO₃) . The formation of the 1:1 binary and 1:1:1 ternary complexes are inferred from the corresponding titration curves. Initial estimates of the formation constants of the resulting species and the protonation constants of the different ligands used have been refined with the HYPERQUAD computer program. Electrochemical investigations for the systems under investigations have been carried out using cyclic voltammetry (CV), differential pulse polarography (DPP), and square wave voltammetry (SWV) on a glassy carbon electrode in I = 0.1 mol/L p-toluenesulfonate as supporting electrolyte.     

New Luminescent Bioprobes Eu(lll)-phloroglucinol Derivatives and Their Spectrofluorimetric, Electrochemical Interactions with Nucleotides and DNA

Two new ligands derived from phloroglucinol 2-{[(4-methoxy benzoyl ) oxy ] } methyl benzoic acid[L1] and 2-{[(4-methyl benzoyl )oxy] methyl} benzoic acid[L2] were synthesized. The solid complex Eu(III)-L2 has been synthesised and characterized by elemental analysis ,UV and IR spectra. The reaction of Eu(III) with the two synthesized ligands has been investigated in I = 0.1 mol dm^-3 p-toluene sulfonate by cyclic voltammetry and square wave voltammetry. The reaction of Eu (III)–L1 and Eu (III)–L2 binary complexes with nucleotide 5′-AMP , 5′-ADP ,5′-ATP , 5′- GMP , 5′-IMP , and 5′-CMP has been investigated using UV, fluorescence and electrochemical methods. The experimental conditions were selected such that self-association of the nucleotides and their complexes was negligibly small, that is, the monomeric complexes were studied. The interaction of the Eu(III)–L1 or L 2 solid complexes with calf-thymus DNA has been investigated by fluorescence and electrochemical methods including cyclic voltammetery(CV) ,differential pulse polarography (DPP) and square wave voltammetry (SWV) on a glassy carbon electrode. The fluorescence intensity of Eu(III)-L2 complex was enhanced with the addition of DNA. Under optimal conditions in phosphate buffer pH 7.0 at 25 °C the linear range is 3–20 μM for calf thymus DNA (CT–DNA) and the corresponding determination limit is 1.8 μM.     

The influence of hydrogen plasma pre-treatment on the structure of BDND electrode surface applied for phenol detection

The surface properties of boron-doped nanocrystalline diamond films treated with H₂ plasma was investigated in regard to their electrochemical response for phenol oxidation. The surface of these films is relatively flat formed by crystallites with sizes of about 40 nm. X-ray photoelectron spectroscopy analyses showed that electrode surface has a high amount of C–H bonds. This behavior is in agreement with Mott-Schottky plot measurements concerning the flat band potential that presented a value as expected for hydrogenated diamond surface. This electrode presented the phenol detection limit of 0.08 mg L⁻¹ for low phenol concentrations from 40 to 250 μmol L⁻¹.     

Fluorescence Enhancement Effect for the Determination of Polychlorinated Biphenyls with Bovine Serum Albumin

A sensitive and selective method for the trace determination of 3, 3’, 4, 4’-tetrachlorobiphenyl (PCB77) by using bovine serum albumin (BSA) as a fluorescence probe was introduced. Under optimum conditions, the enhanced fluorescence intensity was proportional to the concentration of polychlorinated biphenyls in the range of 8.9 × 10⁻⁸–5.0 × 10⁻⁶ mol L⁻¹ for PCB77, and 5.0 × 10⁻⁷–5.0 × 10⁻⁶ mol L⁻¹ for 2, 2’, 5, 5’-tetrachlorbiphenyl (PCB52). The detection limits (S/N = 3) of PCB77 and PCB52 were 2.6 × 10⁻⁸ mol L⁻¹ and 2.9 × 10⁻⁷ mol L⁻¹, respectively. Furthermore, the fluorescence enhancement mechanism was discussed in detail. Results indicated that fluorescence enhancement of the system originated from the formation of BSA-PCBs complexes. In addition, PCBs were mainly bound to the tyrosine residues in BSA molecules.     

Spectrofluorimetric Assessment of Doxycycline Hydrochloride in Pharmaceutical Tablets and Serum Sample Based on the Enhancement of the Luminescence Intensity of the Optical Sensor Sm<Superscript>3+</Superscript> Ion

A simple and sensitive spectrofluorimetric method for determination of trace amount of doxycycline hydrochloride (DC) in pharmaceutical tablets and serum samples was developed. In ammonia buffer solution of pH 8.9 the doxycycline hydrochloride can remarkably enhance the luminescence intensity of the Sm³⁺ ion in Sm³⁺- DC complex at λ_ex = 400 nm. The produced luminescence intensity of Sm³⁺- DC complex in DMSO is in proportion to the concentration of DC and used as optical sensor for its determination. The dynamic range for the determination of DC is 1 × 10⁻⁸ – 5 × 10⁻⁶ mol L⁻¹ and in case of quantum yield calculations is 7 × 10⁻⁹ – 5 × 10⁻⁶ mol L⁻¹ with detection limit of 6.5 × 10⁻¹⁰ mol L⁻¹. The enhancement mechanism of the luminescence intensity in the Sm³⁺- DC system has been also discussed. A comparison with other spectrofluorimetric methods for tetracycline derivatives in which Eu³⁺ ion is used instead of Sm³⁺ ion is also studied.     

Second-derivative Synchronous Fluorometric Method for the Simultaneous Determination of Cinnarizine and Domperidone in Pharmaceutical Preparations. Application to Biological Fluids

A rapid, simple and highly sensitive second derivative synchronous fluorometric method has been developed for the simultaneous analysis of binary mixture of cinnarizine (CN) and domperidone (DOM). The method is based upon measurement of the native fluorescence of these drugs at Δλ = 80 nm in aqueous methanol (50% V/V). The different experimental parameters affecting the native fluorescence of the studied drugs were carefully studied and optimized. The fluorescence-concentration plots were rectilinear over the range of 0.1 to 1.3 μg mL⁻¹ and 0.1–3.0 μg mL⁻¹ for CN and DOM, respectively with lower detection limits of 0.017 and 5.77 × 10⁻³ μg mL⁻¹ and quantification limits of 0.058 and 0.02 μg mL⁻¹ for CN and DOM. The proposed method was successfully applied for the determination of the studied compounds in synthetic mixtures and in commercial tablets. The results obtained were in good agreement with those obtained with reference methods. The high sensitivity attained by the synchronous fluorometric method allowed the determination of CN in real and spiked human plasma. The mean % recoveries in case of spiked human plasma (n = 3) were 96.39 ± 1.18 while that in real human plasma (n = 3) was 104.67 ± 4.16.     

Determination of Ofloxacin using a Highly Selective Photo Probe Based on the Enhancement of the Luminescence Intensity of Eu3+—Ofloxacin Complex in Pharmaceutical and Serum Samples

A rapid, simple and sensitive spectrofluorimetric method for determination of trace amount of ofloxacin was developed. At pH 5.1 the ofloxacin enhances the luminescence intensity of the Eu³⁺ ion in Eu³⁺- ofloxacin complex at λ_ex = 365 nm. The produced luminescence intensity of Eu³⁺-ofloxacin complex was in proportional to the concentration of ofloxacin. The working range for the determination of ofloxacin was 5.0 × 10^-9–5.0 × 10^-6 mol L^-1 with lower detection limit (LOD) and quantitative detection limit (QDL) of 3 × 10^-9 and 9 × 10^-9 mol L^-1, respectively. The enhancement mechanism of the luminescence intensity in the Eu³⁺-ofloxacin system has been also explained. The method revealed good selectivity for ofloxacin in the presence of coexisting substances and used successfully for the assay of ofloxacin in pharmaceutical preparations and serum. A comparison with other standard methods was also discussed.     

Electrochemical preparation of nanosized manganese dioxides from manganese chloride solutions

Manganese dioxides were fabricated by electrodeposition from MnCl₂, MgCl₂/MnCl₂, and HCl/MnCl₂ aqueous solutions at 100 °C, respectively. Oxidation behaviors of Mn(II) on titanium plate were studied by cyclic voltammetry. X-ray diffractometer, scanning electron microscopy, and BET measurements were used to characterize manganese dioxide crystal structures, micromorphologies, and specific surface area. The effects of electrolyte composition and potential on manganese dioxide crystal structure and micromorphology were investigated. Manganese dioxide structure type and micromorphology were controlled by adjusting electrolyte composition. γ-MnO₂ aggregates consisting of nanosheets were electrodeposited from 0.05 mol L⁻¹ MnCl₂ aqueous solution. Crystallinity and the size of γ-MnO₂ nanosheet were increased by adding Mg(II) into electrolyte. Nanosized rod-like α-MnO₂ with higher specific surface area was prepared by adding 2.0 mol L⁻¹ hydrochloric acid into manganese chloride solution.     

Synthesis, Characterization, DNA-Binding and Antiproliferative Activity of Nd(III) Complexes With N-(Nitrogen Heterocyclic) Norcantharidin Acylamide Acid

Three novel complexes [Nd(L)(NO₃)(H₂O)₂]·NO₃·2H₂O (HL¹ = N-pyrimidine norcantharidin acylamide acid, C₁₂H₁₃N₃O₄; HL² = N-pyridine norcantharidin acylamide acid, C₁₃H₁₄N₂O₄; HL³ = N-phenyl norcantharidin acylamide acid, C₁₄H₁₅NO₄) were synthesized. HL¹, HL² and HL³ are the ligand of complex(1), complex(2) and complex(3), respectively. Their structures were characterized by elemental analysis, conductivity measurement, infrared spectra and thermogravimetric analysis. The DNA-binding properties of the complexes have been investigated by fluorescence spectroscopy and viscosity measurements. The results suggest that the complexes can bind to DNA by partial intercalation. The liner Stern-Volmer quenching constant K_sq values are 3.3(±0.21)(1), 1.7(±0.19)(2) and 0.9(±0.04)(3), respectively. Complex (1) and (2) have been found to cleave pBR322 plasmid DNA at physiological pH and temperature. The test of antiproliferation activity indicates that complex(1) has strong antiproliferative ability against the SMMC7721 (IC₅₀ = 131.7 ± 23.4 μmol·L⁻¹) and A549 (IC₅₀ = 128.4 ± 19.9 μmol·L⁻¹) cell lines. The inhibition rates of complex(2) (IC₅₀ = 86.3 ± 11.3 μmol·L⁻¹) are much higher than that of NCTD (IC₅₀ = 115.5 ± 9.5 μmol·L⁻¹) and HL² (111.0 ± 5.7 μmol·L⁻¹) against SMMC7721 cell lines.     

Spectrofluorimetric Assessment of Chlorzoxazone and Ibuprofen in Pharmaceutical Formulations by using Eu-Tetracycline HCl Optical Sensor Doped in Sol–Gel Matrix

A novel, simple, sensitive and selective spectrofluorimetric method was developed for the determination of trace amounts of chlorzoxazone and Ibuprofen in pharmaceutical tablets using optical sensor Eu-Tetracycline HCl doped in sol–gel matrix. The chlorzoxazone or Ibuprofen can remarkably enhance the luminescence intensity of Eu-Tetracycline HCl complex doped in a sol–gel matrix in dimethylformamide (DMF) at pH 9.7 and 6.3, respectively, λ_ex = 400 nm. The enhancing of luminescence intensity peak of Eu-Tetracycline HCl complex at 617 nm is proportional to the concentration of chlorzoxazone or Ibuprofen a result that suggested profitable application as a simple optical sensor for chlorzoxazone or Ibuprofen assessment. The dynamic ranges found for the determination of chlorzoxazone and Ibuprofen concentration are 5 × 10⁻⁹–1 × 10⁻⁴ and 1 × 10⁻⁸–7 × 10⁻⁵ mol L⁻¹, and the limit of detection (LOD) and quantitation limit of detection (LOQ) are 3.1 × 10⁻¹⁰ , 9.6 × 10⁻¹⁰ and 5.6 × 10⁻¹⁰, 1.7 × 10⁻⁹ mol L⁻¹, respectively.     

Bacto agar-based gel polymer electrolyte

The biopolymer of a Bacto agar-based gel polymer electrolyte (GPE) was prepared by addition of NaI and I₂ as redox couple. The prepared GPE was characterized using impedance spectroscopy and X-ray diffraction (XRD) in order to determine its electrical and structural properties, respectively. An optimized ionic conductivity of 12.41 × 10⁻⁴ S cm⁻¹ was achieved for the samples containing 1.6 M NaI and 50 μL I₂. Meanwhile, XRD revealed that the addition of NaI and I₂ altered agar properties and formed an amorphous structure. Linear sweep voltammetry showed that the electrochemical stability window of the sample had a working voltage of 2.0 V.     

Low thermal expansion behavior and transport properties of Ni and Ge co-doped manganese nitride materials at cryogenic temperatures

A series of Ni and Ge co-doped manganese nitride materials were fabricated by mechanical ball milling followed by solid-state sintering. Their thermal expansion properties and electrical and thermal conductivities were investigated in the temperature range of 77–300 K. The results show that Ni and Ge co-doped manganese nitride materials have negative thermal expansion (NTE), and the operation-temperature window of NTE shifts toward the lower temperature region and the variation of linear thermal expansion (ΔL/L _(300K)) in the operation-temperature window of NTE decreases with increasing Ni content. The combination of these two factors results in a low coefficient of thermal expansion (CTE) at cryogenic temperatures. The average CTE of Mn₃(Cu_0.2Ni_0.4Ge_0.4)N drops to ‘zero’ in the temperature range of 190–77 K. The values of electrical and thermal conductivities of the Ni and Ge co-doped manganese nitride materials are in the ranges of 2–3×10³ (ohm cm)⁻¹ and 1.6–3.4 W (m K)⁻¹, respectively.     

Fluorescence Quenching Reaction of Polyvinylpyrrolidone-Eosin Y System for the Determination of Polyvinylpyrrolidone

In pH 1.8 ∼ 2.8 weak acid medium, polyvinylpyrrolidone (PVP) and Eosin Y reacted to form complex that could result in Eosin Y (EY) fluorescence quenching. The maximum quenching wavelength was at 542 nm. The fluorescence quenching (ΔF) was proportional to the concentration of polyvinylpyrrolidone in a certain range. The linear range, the correlation coefficient and the detection limit were 0.33 ∼ 2.0 μg•mL⁻¹, 0.9994 and 99.6 ng•mL⁻¹, respectively. The influences of the coexistence substances were tested and the results showed that the method had good selectivity. Therefore, a new method based on fluorescence quenching of eosin Y by PVP for the determination of trace PVP was developed. The method was sensitive, simple and rapid, which was applied to the determination of trace PVP in the beer with satisfactory results. The reaction mechanism was also discussed.