丝氨酸在蔗糖水溶液中的稀释焓

利用LKB 2277生物活性检测仪分别测定了298.15 K时丝氨酸在不同组成的蔗糖水溶液中的稀释焓, 利用McMillan-Mayer理论,计算了丝氨酸在不同组成的蔗糖水溶液中的焓对相互作用系数,并与其在葡萄糖水溶液中的焓对相互作用系数h2进行了比较.结果表明,丝氨酸在蔗糖和葡萄糖水溶液中的焓对相互作用系数h2都是负值,并且随着糖浓度的增加,h2系数的绝对值逐渐减少.根据溶质-溶质相互作用和溶质-溶剂相互作用对结果进行了解释.     

D-甘露醇与D-山梨醇在氯化钠水溶液中的稀释焓

应用等温流动微量热法测定了298.15 K时互为旋光异构体的D-甘露醇与D-山梨醇在不同浓度的氯化钠水溶液中的稀释焓, 利用 McMillan-Mayer 理论计算了D-甘露醇与D-山梨醇在不同浓度的氯化钠水溶液中的焓对相互作用系数. 结果表明, D-甘露醇和D-山梨醇在氯化钠水溶液中的焓对相互作用系数h2均为正值, h2的值随着氯化钠浓度的增加皆逐渐增大, 但D-山梨醇的焓对相互作用系数h2增大的速率[dh2 /dm(NaCl)]比 D-甘露醇的要大. 根据两多元醇分子构象结构的差异， 溶质-溶质相互作用和溶质-溶剂相互作用对结果进行了解释.     

肌醇在氯化钠水溶液中的稀释焓和焓对相互作用

应用微量热法测定了298.15K时肌醇在纯水和氯化钠水溶液中的稀释焓,根据McMillan-Mayer理论计算了肌醇在不同浓度的氯化钠溶液中的2到4阶焓相互作用系数.结果表明,肌醇在氯化钠溶液中的焓对相互作用系数h2均为负值,并且随着氯化钠浓度的增大,h2的值呈增大趋势.根据溶质-溶质相互作用和溶质-溶剂相互作用对焓对相互作用系数的变化趋势进行了解释.     

N,N-二甲基甲酰胺在不同浓度氯化钠水溶液中的稀释过程热力学

应用等温流动微量热法测定了298.15 K时N,N-二甲基甲酰胺(DMF)在纯水及不同浓度氯化钠水溶液中的稀释焓, 根据McMillan-Mayer理论计算得到各级同系焓相互作用系数. 结果表明, DMF在纯水及氯化钠水溶液中的焓对相互作用系数h2均为正值, 并且随着氯化钠浓度的增加, h2的值逐渐增大. 根据溶质-溶质相互作用和溶质-溶剂相互作用对结果进行了解释.     

D-山梨醇在纯水和卤化钠水溶液中293.15K～318.15K的稀释焓

应用流动式等温精密微量热技术测定4个温度(293.15、303.15、308.15和318.15 K)下D-山梨醇在纯水和卤化钠水溶液中的稀释焓.根据改进的McMillan-Mayer理论对所测数据进行关联,得到了表观摩尔稀释焓对浓度变化的经验方程和各阶焓相互作用系数(h2,h3和h4)和二阶熵相互作用系数(s2),根...     

肌醇在纯水和卤化钠水溶液中稀释过程的热力学性质

应用微量热法测定了298.15 K时肌醇在纯水和卤化钠水溶液中的稀释焓, 根据McMillan-Mayer理论, 计算了肌醇在溶液中的二到四阶焓相互作用系数. 结果表明, 肌醇在卤化钠溶液中的焓对相互作用系数h2均为负值, 并且随着卤素阴离子半径的增大, h2的绝对值呈增大趋势.     

水溶液中氨基酸与甲脲的焓相互作用

用LKB-2277精密微热量计测定了298.15 K时甘氨酸、L-丙氨酸、L-丝氨酸、L-缬 氨酸、L-苏氨酸和L-脯氨酸六种α-氨基酸分别与甲脲分子在水溶液中的混合过程焓变及 这些溶质分子在水溶液中的稀释焓.实验数据根据McMillan-Mayer理论进行回归分析,得到 各级交叉焓相互作用系数.讨论了不同氨基酸与甲脲分子的相互作用机制.结果表明,氨基酸 的两性离子部分、α-碳上的非极性脂肪侧基、极性的羟基侧基和五元吡咯环结构对交叉焓 对作用系数hxy具有不同贡献.与尿素相比,甲脲分子中-CH3基团的引入明显增强了分子的 疏水性.     

甘氨酸从水到酰胺衍生物水溶液中的迁移焓

用RD496-Ⅱ型微量热量计测定了298.15 K甘氨酸在N-甲基甲酰胺（NMF）,N, N-二甲基甲酰胺（DMF）,N-甲基乙酰胺（NMA）,N, N-二甲基乙酰胺（DMA）水溶液中的溶解焓,计算了甘氨酸从水到四种酰胺衍生物水溶液中的迁移焓（ΔtrH）。根据结构水合作用模型讨论了酰胺的结构对甘氨酸迁移焓的影响。实验结果表明：甘氨酸在酰胺衍生物水溶液中的迁移焓均为正值,并且随着溶液浓度增大而增大。比较甘氨酸在甲酰胺（FA）和乙酰胺（AD）水溶液中的迁移焓,发现在不同酰胺水溶液中迁移焓大小为：DMA>NMA>DMF>NMF>AD>FA。甘氨酸与甲酰胺之间以亲水-亲水相互作用为主,与其它酰胺之间以亲水-疏水作用为主。     

三种氨基酸从水到DMSO水溶液的迁移焓研究

用微量量热法测定甘氨酸、L-丙氨酸、L-丝氨酸在二甲基亚砜(DMSO)水溶液中的溶解焓, 计算得到三种氨基酸从水到DMSO水溶液的迁移焓, 根据共球交盖模型对氨基酸与DMSO在水溶液中的相互作用进行讨论, 并与前期的氨基酸在尿素水溶液体系中的迁移焓进行比较. 结果显示, 氨基酸与共溶剂分子之间产生的静电相互作用以及亲水-亲水相互作用对氨基酸迁移焓有负贡献, 而亲水-疏水、疏水-疏水相互作用对氨基酸迁移焓有正贡献. 与尿素水溶液中氨基酸迁移焓的绝对值随尿素浓度的增加而增加, 并规律性地出现多个变化点的情况不同, 氨基酸从水到DMSO水溶液的迁移焓随DMSO浓度的增加而线性增加. 这种差异反映了尿素与DMSO及其水溶液结构的不同, 为认识尿素在水溶液中的缔合作用提供了对比依据.     

木糖醇在纯水和碱金属卤化物水溶液中的稀释焓

应用等温流动微量热法测定了298.15 K时木糖醇在纯水和碱金属卤化物水溶液中的稀释焓, 根据McMillan- Mayer理论计算了木糖醇在溶液中的二到四阶焓相互作用系数. 结果表明, 木糖醇在碱金属卤盐溶液中的焓对相互作用系数h₂均为正值, h₂值随着碱金属阳离子或卤素阴离子半径的增大皆依次增大. 根据木糖醇参与的溶质-溶质, 溶质-溶剂等弱相互作用, 对该种多元醇在碱金属卤盐水溶液中的焓相互作用系数的变化进行了解释.     

Iterative Multireference Configuration Interaction

Iterative multireference configuration interaction (IMRCI) is proposed. It is exploited to compute the electronic energies of H\begin{document}$_2$\end{document}O and CH\begin{document}$_2$\end{document} (singlet and triplet states) at equilibrium and non-equilibrium geometries. The potential energy curves of H\begin{document}$_2$\end{document}O, CH\begin{document}$_2$\end{document} (singlet and triplet states) and N\begin{document}$_2$\end{document} have also been calculated with IMRCI as well as the M?ller Plesset perturbation theory (MP2, MP3, and MP4), the coupled cluster method with single and double substitutions (CCSD), and CCSD with perturbative triples correction (CCSD(T)). These calculations demonstrate that IMRCI results are independent of the initial guess of configuration functions in the reference space and converge quickly to the results of the full configuration interaction. The IMRCI errors relative to the full configuration interaction results are at the order of magnitude of 10\begin{document}$^{-5}$\end{document} hartree within just 2-4 iterations. Further, IMRCI provides an efficient way to find on the potential energy surface the leading electron configurations which, as correct reference states, will be very helpful for the single-reference and multireference theoretical models to obtain accurate results.     

水团簇(H2O)n中多体作用强度与水分子间距的关系

使用高精度从头算方法(含基组重叠误差校正)计算了水团簇(H₂O)_n (n = 8, 10, 16, 20, 22, 24)中的所有二体、三体和四体作用能,分析了水团簇中的多体效应.研究表明,二体作用对体系总作用能的贡献高达70%以上,三体作用对总作用能的贡献可高达25%,四体作用在总作用能中所占比例不超过3%,五体及以上多体作用能在总作用能中所占比例更小,不超过0.5%.本文研究还表明,两个水分子间距小于0.68 nm的二体作用、三个和四个水分子中最近的两个水分子间距小于0.31 nm的三体和四体作用对体系总作用能的贡献高达99.4%.因此,以生物体系为对象的分子模拟方法应该具备准确地模拟两个水分子间距小于0.68 nm的二体作用、三个和四个水分子中最近的两个分子间距小于0.31 nm的三体和四体作用的能力.     

Factors Affecting Preparation of Molecularly Imprinted Polymer and Methods on Finding Template-Monomer Interaction as the Key of Selective Properties of the Materials

Molecular imprinting is a technique for creating artificial recognition sites on polymer matrices that complement the template in terms of size, shape, and spatial arrangement of functional groups. The main advantage of Molecularly Imprinted Polymers (MIP) as the polymer for use with a molecular imprinting technique is that they have high selectivity and affinity for the target molecules used in the molding process. The components of a Molecularly Imprinted Polymer are template, functional monomer, cross-linker, solvent, and initiator. Many things determine the success of a Molecularly Imprinted Polymer, but the Molecularly Imprinted Polymer component and the interaction between template-monomers are the most critical factors. This review will discuss how to find the interaction between template and monomer in Molecularly Imprinted Polymer before polymerization and after polymerization and choose the suitable component for MIP development. Computer simulation, UV-Vis spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR), Proton-Nuclear Magnetic Resonance (¹H-NMR) are generally used to determine the type and strength of intermolecular interaction on pre-polymerization stage. In turn, Suspended State Saturation Transfer Difference High Resolution/Magic Angle Spinning (STD HR/MAS) NMR, Raman Spectroscopy, and Surface-Enhanced Raman Scattering (SERS) and Fluorescence Spectroscopy are used to detect chemical interaction after polymerization. Hydrogen bonding is the type of interaction that is becoming a focus to find on all methods as this interaction strongly contributes to the affinity of molecularly imprinted polymers (MIPs).     

Research progress in cation-π interactions

Cation-π interaction is a potent intermolecular interaction between a cation and an aromatic system,which has been viewed as a new kind of binding force,as being compared with the classical interactions(e.g. hydrogen bonding,electrostatic and hydrophobic interactions). Cation-π interactions have been observed in a wide range of biological contexts. In this paper,we present an overview of the typical cation-π interactions in biological systems,the experimental and theoretical investigations on cation-π interactions,as well as the research results on cation-π interactions in our group.     

The role of surface forces in mineral flotation

Flotation is an interfacial separation technique, which plays a major role in mineral processing industry. It separates particles according to their wetting properties. In flotation pulp, particles and bubbles are highly dispersed in aqueous medium and in the presence of various flotation reagents. Almost all interfacial interactions including inter-particle, inter-bubble, and bubble-particle interactions in the complex pulp medium are driven by surface forces. Therefore, a fundamental understanding of the role of surface forces in flotation is a prerequisite to enhance practical flotation performance and adapt it for treatment of complex and refractory ores. In this paper, recent advances in the field of surface forces encountered in mineral flotation are reviewed. In particular, we highlight the latest progress in the attachment mechanism between bubble and particle with the aid of atomic force microscope and interference microscope. The current knowledge gap and future directions are also discussed.     

Interactions of water-soluble polymers with small molecules II: Poly(2-diethylaminoethyl methacrylate)-methyl orange and its homolog systems at different temperatures

In order to investigate the interactions of poly(2-diethylaminoethyl methacrylate) (PDEAEMA) with methyl orange and its homologs in solution, temperature dependence of the complex formation has been examined in detail by the measurements of transmittance and specific conductance for the systems. Furthermore, the binding course of dyes to PDEAEMA has been studied on the basis of thermodynamic parameters obtained from equilibrium dialysis experiments at different temperatures. It was observed that the flocculation process shifted to lower dye concentrations in accordance with increasing hydrophobicity of the dyes in the order, methyl orange < ethyl orange < butyl orange, and the process of complex formation was characterized by three separate regions according to the slope of specific conductivity-mixing ratio curve for mixtures of PDEAEMA and dye. The temperature dependences of F,H and S suggest that, for dyes-PDEAEMA complex formation, the hydrophobic interaction is predominant at a low temperature but the electrostatic interaction becomes important as the temperature increases.     

A Critical Overview of Current Theoretical Methods of Estimating the Energy of Intramolecular Interactions

This article is probably the first such comprehensive review of theoretical methods for estimating the energy of intramolecular hydrogen bonds or other interactions that are frequently the subject of scientific research. Rather than on a plethora of numerical data, the main focus is on discussing the theoretical rationale of each method. Additionally, attention is paid to the fact that it is very often possible to use several variants of a particular method. Both of the methods themselves and their variants often give wide ranges of the obtained estimates. Attention is drawn to the fact that the applicability of a particular method may be significantly limited by various factors that disturb the reliability of the estimation, such as considerable structural changes or new important interactions in the reference system.     

The Study of Molecular Interactions in Liquids Using Temperature Variation of Ultrasonic Velocity

Abstract

The associative behaviour of organic liquids resulting from molecular interactions using ultrasonic velocity data taken from the literature is reported and a classification of these liquids is done as associative categories I and II along with the normal one. This work is fruitful to understand chemico-physical properties of organic liquids and departures from the normal characteristics.     

Exchange interaction between two different atoms at large distances

Different cases of the exchange interaction in the system (A+e+C⁺) are considered and corresponding expressions for this interaction are obtained. A suitable representation for the electron atom interaction is also discussed.     

Multireference perturbation CI III. Fast evaluation of the one-particle density matrix

Within the frame of multireference perturbation configuration interaction we have developed a fast algorithm, based on diagrammatic techniques, for the calculation of the first-order correction to the one-particle density matrix. As an example of an application we have chosen the evaluation of the dipole moment of the CO molecule, where utilization of the first-order density is shown to corroborate the variational calculation. Received: 4 August 1998 / Accepted: 21 September 1998 / Published online: 16 November 1998