A spray flamelet/progress variable approach combined with a transported joint PDF model for turbulent spray flames

A spray flamelet/progress variable approach is developed for use in spray combustion with partly pre-vaporised liquid fuel, where a laminar spray flamelet library accounts for evaporation within the laminar flame structures. For this purpose, the standard spray flamelet formulation for pure evaporating liquid fuel and oxidiser is extended by a chemical reaction progress variable in both the turbulent spray flame model and the laminar spray flame structures, in order to account for the effect of pre-vaporised liquid fuel for instance through use of a pilot flame. This new approach is combined with a transported joint probability density function (PDF) method for the simulation of a turbulent piloted ethanol/air spray flame, and the extension requires the formulation of a joint three-variate PDF depending on the gas phase mixture fraction, the chemical reaction progress variable, and gas enthalpy. The molecular mixing is modelled with the extended interaction-by-exchange-with-the-mean (IEM) model, where source terms account for spray evaporation and heat exchange due to evaporation as well as the chemical reaction rate for the chemical reaction progress variable. This is the first formulation using a spray flamelet model considering both evaporation and partly pre-vaporised liquid fuel within the laminar spray flamelets. Results with this new formulation show good agreement with the experimental data provided by A.R. Masri, Sydney, Australia. The analysis of the Lagrangian statistics of the gas temperature and the OH mass fraction indicates that partially premixed combustion prevails near the nozzle exit of the spray, whereas further downstream, the non-premixed flame is promoted towards the inner rich-side of the spray jet since the pilot flame heats up the premixed inner spray zone. In summary, the simulation with the new formulation considering the reaction progress variable shows good performance, greatly improving the standard formulation, and it provides new insight into the local structure of this complex spray flame.     

Ethanol turbulent spray flame response to gas velocity modulation

A numerical investigation of the interaction between a spray flame and an acoustic forcing of the velocity field is presented in this paper. In combustion systems, a thermoacoustic instability is the result of a process of coupling between oscillations in heat released and acoustic waves. When liquid fuels are used, the atomisation and the evaporation process also undergo the effects of such instabilities, and the computational fluid dynamics of these complex phenomena becomes a challenging task. In this paper, an acoustic perturbation is applied to the mass flow of the gas phase at the inlet and its effect on the evaporating fuel spray and on the flame front is investigated with unsteady Reynolds averaged Navier-Stokes numerical simulations. Two flames are simulated: a partially premixed ethanol/air spray flame and a premixed pre-vaporised ethanol/air flame, with and without acoustic forcing. The frequencies used to perturb the flames are 200 and 2500 Hz, which are representative for two different regimes. Those regimes are classified based on the Strouhal number St = (D/U)f_f: at 200 Hz, St = 0.07, and at 2500 Hz, St = 0.8. The exposure of the flame to a 200 Hz signal results in a stretching of the flame which causes gas field fluctuations, a delay of the evaporation and an increase of the reaction rate. The coupling between the flame and the flow excitation is such that the flame breaks up periodically. At 2500 Hz, the evaporation rate increases but the response of the gas field is weak and the flame is more stable. The presence of droplets does not play a crucial role at 2500 Hz, as shown by a comparison of the discrete flame function in the case of spray and pre-vaporised flame. At low Strouhal number, the forced response of the pre-vaporised flame is much higher compared to that of the spray flame.     

Combustion of partially premixed spray jets

Gas turbines, liquid rocket motors, and oil-fired furnaces utilize the spray combustion of continuously injected liquid fuels. In most cases, the liquid spray is mixed with an oxidizer prior to combustion, and further oxidizer is supplied from the outside of the spray to complete diffusion combustion. This rich premixed spray is called “partially premixed spray.” Partially premixed sprays have not been studied systematically although they are of practical importance. In the present study, the burning behavior of partially premixed sprays was experimentally studied with a newly developed spray burner. A fuel spray and an oxidizer, diluted with nitrogen, was injected into the air. The overall equivalence ratio of the spray jet was set larger than unity to establish partially premixed spray combustion. In the present burner, the mean droplet diameter of the atomized liquid fuel could be varied without varying the overall equivalence ratio of the spray jet. Two combustion modes with and without an internal flame were observed. As the mean droplet diameter was increased or the overall equivalence ratio of the spray jet was decreased, the transition from spray combustion only with an external group flame to that with the internal premixed flame occurred. The results suggest that the internal flame was supported by flammable mixture through the vaporization of fine droplets, and the passage of droplet clusters deformed the internal flame and caused internal flame oscillation. The existence of the internal premixed flame enhanced the vaporization of droplets in the post-premixed-flame zone within the external diffusion flame.     

Laminar premixed spray flame analysis with thermally sensitive intermediate kinetics

A new thermo-diffusive analysis of one-dimensional laminar lean or rich off-stoichiometric premixed spray flames has been performed using a chain branching/chain breaking chemical kinetic scheme and under the assumption that the fuel droplets evaporate in a sharp front. The sensitivity of the flame structure, speed and the location of the evaporation front to the initial droplet load have been demonstrated. A linear stability analysis reveals the way in which the spray's presence modifies the neutral stability curves.     

Flame structure and flame spread rate over a solid fuel in partially premixed atmospheres

We have investigated the downward flame spread over a thin solid fuel. Hydrogen, methane, or propane, included in the gaseous product of pyrolysis reaction, is added in the ambient air. The fuel concentration is kept below the lean flammability limit to observe the partially premixing effect. Both experimental and numerical studies have been conducted. Results show that, in partially premixed atmospheres, both blue flame and luminous flame regions are enlarged, and the flame spread rate is increased. Based on the flame index, a so-called triple flame is observed. The heat release rate ahead of the original diffusion flame is increased by adding the fuel, and its profile is moved upstream. Here, we focus on the heat input by adding the fuel in the opposed air, which could be a direct factor to intensify the combustion reaction. The dependence of the flame spread rate on the heat input is almost the same for methane and propane/air mixtures, but larger effect is observed for hydrogen/air mixture. Since the deficient reactant in lean mixture is fuel, the larger effect of hydrogen could be explained based on the Lewis number consideration. That is, the combustion is surely intensified for all cases, but this effect is larger for lean hydrogen/air mixture (Le < 1), because more fuel diffuses toward the lean premixed flame ahead of the original diffusion flame. Resultantly, the pyrolysis reaction is promoted to support the higher flame spread rate.     

Premixed flame response to equivalence ratio perturbations

This paper studies the heat-release oscillation response of premixed flames to oscillations in reactant stream fuel/air ratio. Prior analyses have studied this problem in the linear regime and have shown that heat release dynamics are controlled by the superposition of three processes: flame speed, heat of reaction, and flame surface area oscillations. Each contribution has somewhat different dynamics, leading to complex frequency and mean fuel/air ratio dependencies. The present work extends these analyses to include stretch and non quasi-steady effects on the linear flame dynamics, as well as analysis of nonlinearities in flame response characteristics. Because the flame response is controlled by a superposition of multiple processes, each with a highly nonlinear dependence upon fuel/air ratio, the results are quite rich and the key nonlinearity mechanism varies with mean fuel/air ratio, frequency, and amplitude of excitation. In the quasi-steady framework, two key mechanisms leading to heat-release saturation have been identified. The first of these is the flame-kinematic mechanism, previously studied in the context of premixed flame response to flow oscillations and recently highlighted by Birbaud et al. (Combustion and Flame 154 (2008), 356–367). This mechanism arises due to fluctuations in flame position associated with the oscillations in flame speed. The second mechanism is due to the intrinsically nonlinear dependence of flame speed and mixture heat of reaction upon fuel/air ratio oscillations. This second mechanism is particularly dominant at perturbation amplitudes that cause the instantaneous stoichiometry to oscillate between lean and rich values, thereby causing non-monotonic variation of local flame speed and heat of reaction with equivalence ratio.     

Effect of non-zero relative velocity on the flame speed of two-phase laminar flames

A numerical study of one-dimensional n-heptane/air spray flames is presented. The objective is to evaluate the flame propagation speed in the case where droplets evaporate inside the reaction zone with possibly non-zero relative velocity. A Direct Numerical Simulation approach for the gaseous phase is coupled to a discrete particle Lagrangian formalism for the dispersed phase. A global two-step n-heptane/air chemical mechanism is used. The effects of initial droplet diameter, overall equivalence ratio, liquid loading and relative velocity between gaseous and liquid phases on the laminar spray flame speed and structure are studied. For lean premixed cases, it is found that the laminar flame speed decreases with increasing initial droplet diameter and relative velocity. On the contrary, rich premixed cases show a range of diameters for which the flame speed is enhanced compared to the corresponding purely gaseous flame. Finally, spray flames controlled by evaporation always have lower flame speeds. To highlight the controlling parameters of spray flame speed, approximate analytical expressions are proposed, which give the correct trends of the spray flame propagation speed behavior for both lean and rich mixtures.     

Propagation and extinction of an unsteady spherical spray flame front

Experimental evidence seems to indicate that the life of a laminar spherical flame front propagating through a fresh mixture of air and liquid fuel droplets can be roughly split into three stages: (1) ignition, (2) radial propagation with a smooth flame front and (3) propagation with flame front cellularization and/or pulsation. In this work, the second stage is analysed using the slowly varying flame approach, for a fuel rich flame. The droplets are presumed to vaporize in a sharp front ahead of the reaction front. Evolution equations for the flame and evaporation fronts are derived. For the former the combined effect of heat loss due to droplet vaporization and radiation plays a dominant explicit role. In addition, the structure of the evaporation front is deduced using asymptotics based on a large parameter associated with spray vaporization. Numerical calculations based on the analysis point to the way in which the spray modifies conditions for flame front extinction. Within the framework of the present simplified model the main relevant parameters turn out to be the initial liquid fuel load in the fresh mixture and/or the latent heat of vaporization of the fuel.     

Identification of droplet burning modes in lean, partially prevaporized swirl-stabilized spray flames

Experimental and numerical investigations of single droplet burning modes in a lean, partially prevaporized swirl-stabilized spray flame are reported. In the experiment single droplet flames have been visualized by CH-PLIF and simultaneous recording of the Mie signal. Two single droplet burning modes were identified: the envelope flame is a spherical diffusion flame burning at near-stoichiometric conditions. The wake flame is a potentially lean, partially premixed flame located downstream of the droplet. The droplet burning mode is of practical relevance, since it has significant impact on NO formation due to incomplete prevaporization.The droplet burning mode is determined by the ratio of chemical and convective time scales. The convective time scale is related to the droplet slip velocity. The impact of turbulent gas phase velocity fluctuations on droplet mechanics and droplet burning is discussed, based on a previous numerical investigation. In the present study the droplet slip velocity was measured with the 3D Phase Doppler (3D-PD) technique. For the measured slip velocities and ambient conditions in the hot gas region of the spray flame, simulations of single droplet burning were performed utilizing detailed models for chemical reaction, diffusive transport and vaporization. An agreement between the droplet burning modes predicted by the simulation and the droplet burning modes observed in the experiments was found.     

Effects of heat conduction and radical quenching on premixed stagnation flame stabilised by a wall

The premixed stagnation flame stabilised by a wall is analysed theoretically considering thermally sensitive intermediate kinetics. We consider the limit case of infinitely large activation energy of the chain-branching reaction, in which the radical is produced infinitely fast once the cross-over temperature is reached. Under the assumptions of potential flow field and constant density, the correlation for flame position and stretch rate of the premixed stagnation flame is derived. Based on this correlation, the effects of heat conduction and radical quenching on the wall surface are examined. The wall temperature is shown to have great impact on flame bifurcation and extinction, especially when the flame is close to the wall. Different flame structures are observed for near-wall normal flame, weak flame, and critically quenched flame. The fuel and radical Lewis numbers are found to have opposite effects on the extinction stretch rate. Moreover, it is also demonstrated that only when the flame is close to the wall does the radical quenching strongly influence the flame bifurcation and extinction. The extinction stretch rate is shown to decrease with the amount of radical quenching for different fuel and radical Lewis numbers. Besides, the coupling between the wall heat conduction and radical quenching is found to greatly influence the bifurcation and extinction of the premixed stagnation flame.     

Influence of micro-explosions on the stability of laminar premixed water-in-fuel emulsion spray flames

A model is presented for a one-dimensional laminar premixed flame, propagating into a rich, off-stoichiometric, fresh homogenous mixture of water-in-fuel emulsion spray, air and inert gas. Due to its relatively large latent heat of vaporisation, the water vapour acts to cool the flame that is sustained by the prior release of fuel vapour. To simplify the inherent complexity that characterises the analytic solution of multi-phase combustion processes, the analysis is restricted to fuel-rich laminar premixed water-in-fuel flames, and assumes a single-step global chemical reaction mechanism. The main purpose is to investigate the steady-state burning velocity and burnt temperature as functions of parameters such as initial water content in the emulsified droplet and total liquid droplet loading. In particular, the influence of micro-explosion of the spray’s droplets on the flame’s characteristics is highlighted for the first time. Steady-state analytical solutions are obtained and the sensitivity of the flame temperature and the flame propagating velocity to the initial water content of the micro-exploding emulsion droplets is established. A linear stability analysis is also performed and reveals the manner in which the micro-explosions influence the neutral stability boundaries of both cellular and pulsating instabilities.     

Concept and combustion characteristics of ultra-micro combustors with premixed flame

Under micro-scale combustion influenced by quenching distance, high heat loss, shortened diffusion characteristic time, and flow laminarization, we clarified the most important issues for the combustor of ultra-micro gas turbines (UMGT), such as high space heating rate, low pressure loss, and premixed combustion. The stability behavior of single flames stabilized on top of micro tubes was examined using premixtures of air with hydrogen, methane, and propane to understand the basic combustion behavior of micro premixed flames. When micro tube inner diameters were smaller than 0.4 mm, all of the fuels exhibited critical equivalence ratios in fuel-rich regions, below which no flame formed, and above which the two stability limits of blow-off and extinction appeared at a certain equivalence ratio. The extinction limit for very fuel-rich premixtures was due to heat loss to the surrounding air and the tube. The extinction limit for more diluted fuel-rich premixtures was due to leakage of unburned fuel under the flame base. This clarification and the results of micro flame analysis led to a flat-flame burning method. For hydrogen, a prototype of a flat-flame ultra-micro combustor with a volume of 0.067 cm³ was made and tested. The flame stability region satisfied the optimum operation region of the UMGT with a 16 W output. The temperatures in the combustion chamber were sufficiently high, and the combustion efficiency achieved was more than 99.2%. For methane, the effects on flame stability of an upper wall in the combustion chamber were examined. The results can be explained by the heat loss and flame stretch.     

Characterization of multi-regime reaction zones in a piloted inhomogeneous jet flame with local extinction

Gradient free regime identification (GFRI) is applied to 1D Raman/Rayleigh/LIF measurements of temperature and major species from the intermediate velocity case of the Sydney piloted inhomogeneous jet flame series to better understand the structure of reaction zones and the downstream evolution of multi-regime characteristics. The GFRI approach allows local reaction zones to be detected and characterized as premixed, dominantly premixed, multi-regime, dominantly non-premixed, or non-premixed flame structures, based on flame markers (mixture fraction, chemical mode, and heat release rate) derived from the experimental data. The statistics of chemical mode zero-crossings, which mark premixed reaction zones, and the relative populations of flame structures are shown to be sensitive to the state of mixing in the near field of the flame and to the level of local extinction farther downstream. Multi-regime structures, where premixed and non-premixed reaction zones occur in close proximity and both contribute to overall heat release, account for nearly half the total population at streamwise locations within the first several jet diameters. There is a rapid transition within the near field whereby the relative population of non-premixed and dominantly non-premixed structures grows from 0.05 to nearly 0.5, and the population of premixed and dominantly premixed structures decreases correspondingly as fluid entering the reaction zone becomes progressively fuel-rich. Local extinction and re-ignition bring a resurgence in premixed-type structures, many of which occur at fuel-lean conditions. There are also modest populations of multi-regime structures, having chemical mode zero-crossings at lean conditions, which would not exist in a fully burning jet flame.     

On the behaviour of organic gel multi-size spray diffusion flames

The recently reported, experimentally observed, unusual behaviour of organic gellant-based fuel droplets which, under appropriate ambient thermal conditions, evaporate and burn in an oscillatory fashion is incorporated in a phenomenological manner in a model of a two-dimensional arbitrary multi-size spray diffusion flame. Non-unity Lewis numbers are permitted for the fuel vapour and oxidant. A combined analytical/numerical solution of the governing equations is presented and used to investigate how a spray's initial polydispersity and the frequency of oscillatory evaporation influence the combustion field. It is demonstrated that the initial droplet size distribution and the frequency of evaporation of the burning gel droplets can have an acute impact both on the homogeneous diffusion flame shape, height and width and on the thermal field downstream of the flame front. Hot spots of individual (or clusters of) burning droplets can be created and under certain operating conditions can lead to hotter temperatures than experienced in the main homogeneous flame. The intensity of these hotspots, their number and location are sensitive to spray related parameters. In realistic combustion chambers there is a danger inherent in the existence of hotspots in undesirable regions as they can damage the structural integrity. Other computed results demonstrate that, in relation to the spray diffusion flames obtained using an equivalent purely liquid fuel spray, the use of a gel fuel spray can lead, under certain operating conditions, to a reduction in flame height and temperature. The latter effect is critical when considering flame extinction.     

Direct numerical simulations and analysis of three-dimensional n-heptane spray flames in a model swirl combustor

Three-dimensional n-heptane spray flames in a swirl combustor are investigated by means of direct numerical simulation (DNS) to provide insight into realistic spray evaporation and combustion as well as relevant modeling issues. The variable-density, low-Mach number Navier–Stokes equations are solved using a fully conservative and kinetic energy conserving finite difference scheme in cylindrical coordinates. Dispersed droplets are tracked in a Lagrangian framework. Droplet evaporation is described by an equilibrium model. Gas combustion is represented using an adaptive one-step irreversible reaction. Two different cases are studied: a lean case that resembles a lean direct injection combustion, and a rich case that represents the primary combustion region of a rich-burn/quick-quench/lean-burn combustor. The results suggest that premixed combustion contribute more than 70% to the total heat release rate, although diffusion flame have volumetrically a higher contribution. The conditional mean scalar dissipation rate is shown to be strongly influenced, especially in the rich case. The conditional mean evaporation rate increases almost linearly with mixture fraction in the lean case, but shows a more complex behavior in the rich case. The probability density functions (PDF) of mixture fraction in spray combustion are shown to be quite complex. To model this behavior, the formulation of the PDF in a transformed mixture fraction space is proposed and demonstrated to predict the DNS data reasonably well.     

Effect of Lewis number on premixed laminar lean-limit flames stabilized on a bluff body

In this paper, we present a study on the effect of Lewis number, Le, on the stabilization and blow-off of laminar lean limit premixed flames stabilized on a cylindrical bluff body. Numerical simulations and experiments are conducted for propane, methane and two blends of hydrogen with methane as fuel gases, containing 20% and 40% of hydrogen by volume, respectively. It is found that the Le?>?1 flame blows-off via convection from the base of the flame (without formation of a neck) when the conditions for flame anchoring are not fulfilled. Le?≤?1 flames exhibit a necking phenomenon just before lean blow-off. This necking of the flame front is a result of the local reduction in mass burning rates causing flame merging and quenching of the thin flame tube formed. The structure of these flames at the necking location is found to be similar to tubular flames. It is found that extinction stretch rates for tubular flames closely match values at the neck location of bluff-body flames of corresponding mixtures, suggesting that excessive flame stretch is directly responsible for blow-off of the studied Le?≤?1 flames. After quenching of the neck, the upstream part forms a steady and stable residual flame in the wake of the bluff body while the downstream part is convected away.     

A review of chemical diffusion: Criticism and limits of simplified methods for diffusion coefficient calculation

A review of the physics and modelling of mass diffusion involving different gaseous chemical species is firstly proposed. Both accurate and simplified models for mass diffusion involve the calculation of individual species diffusion coefficients. Since these are computationally expensive, in CFD they are commonly estimated by assuming constant Lewis or Schmidt numbers for each chemical species. The constant Lewis number assumption is particularly used. As a matter of fact, these assumptions have never been theoretically justified nor verified in practical flames. The only published information are the first observations by Smooke and Giovangigli about the Lewis number against temperature distributions in methane–air premixed and counterflow diffusion one-dimensional flames. The aim of this work is to verify these assumptions. Functional dependences of molecular properties appearing in these numbers are made explicit to show that while Sc _i depends only on composition, Le _i depends also on temperature and therefore it certainly cannot be assumed constant in a flame. Then, accurately calculating molecular properties, distributions of these characteristic numbers against temperature are obtained a posteriori from numerical simulations of different flames, premixed and non-premixed, and burning different fuels. For non-premixed flames, individual species Lewis number distributions are broad for most of the species considered in this article, whilst they are tight for premixed flames. Some attention is focused on the particular shape of Lewis distributions in non-premixed flames: they are characterized by four or five (when extinction is experienced) branches associated to precise regions in the flame (basically, lean, rich and stoichiometric combusting zones). Instead, the Schmidt distributions are always tighter, also when extinctions take place: for many species they can be approximatively assumed constant. Finally, a simplified procedure to estimate individual species diffusion coefficients is suggested, assuming the median of non-premixed flame Schmidt distributions has a constant value for each chemical species.     

Lean or ultra-lean stretched planar methane/air flames

Lean premixed combustion has potential advantages of reducing pollutants and improving fuel economy. In some lean engine concepts, the fuel is directly injected into the combustion chamber resulting in a distribution of lean fuel/air mixtures. In this case, very lean mixtures can burn when supported by hot products from more strongly burning flames. This study examines the downstream interaction of opposed jets of a lean-limit CH₄/air mixture vs. a lean H₂/air flame. The CH₄ mixtures are near or below the lean flammability limit. The flame composition is measured by laser-induced Raman scattering and is compared to numerical simulations with detailed chemistry and molecular transport including the Soret effect. Several sub-limit lean CH₄/air flames supported by the products from the lean H₂/air flame are studied, and a small amount of CO₂ product (around 1% mole fraction) is formed in a “negative flame speed” flame where the weak CH₄/air mixture diffuses across the stagnation plane into the hot products from the H₂/air flame. Raman scattering measurements of temperature and species concentration are compared to detailed simulations using GRI-3.0, C₁, and C₂ chemical kinetic mechanisms, with good agreement obtained in the lean-limit or sub-limit flames. Stronger self-propagating CH₄/air mixtures result in a much higher concentration of product (around 6% CO₂ mole fraction), and the simulation results are sensitive to the specific chemical mechanism. These model-data comparisons for stronger CH₄/air flames improve when using either the C₂ or the Williams mechanisms.     

Numerical simulation of a mixed-mode reaction front in a PPC engine

The ignition process, mode of combustion and reaction front propagation in a partially premixed combustion (PPC) engine running with a primary reference fuel (87% iso-octane, 13% n-heptane by volume) is studied numerically in a large eddy simulation. Different combustion modes, ignition front propagation, premixed flame and non-premixed flame, are observed simultaneously. Displacement speed of CO iso-surface propagation describes the transition of premixed auto-ignition to non-premixed flame. High temporal resolution optical data of CH₂O and chemiluminescence are compared with simulated results. A high speed ignition front is seen to expand through fuel-rich mixture and stabilize around stoichiometry in a non-premixed flame while lean premixed combustion occurs in the spray wake at a much slower pace. A good qualitative agreement of the distribution of chemiluminescence and CH₂O formation and destruction shows that the simulation approach sufficiently captures the driving physics of mixed-mode combustion in PPC engines. The study shows that the transition from auto-ignition to flame occurs over a period of several crank angles and the reaction front propagation can be captured using the described model.     

Flame structure and stabilization of lean-premixed sprays in a counterflow with low-volatility fuel

An experimental study was performed on the combustion of lean-premixed spays in a counterflow. n-Decane was used as a liquid fuel with low volatility. The flame structure and stabilization were discussed based on the flame-spread mechanism of a droplet array with a low-volatility fuel. The spray flame consisted of a blue region and a yellow luminous region. The flame spread among droplets and group-flame formation through the droplet interaction were observed on the premixed spray side, while envelope flames were also observed on the opposing airflow side. The blue-flame region consisted of premixed flames propagating in the mixture layer around each droplet, the envelope diffusion flames around each droplet, the lower parts of the group diffusion flame surrounding each droplet cluster, and the envelope flame around droplets passing through the group flame. The flame was stabilized within a specific range of the mean droplet diameter via a balance between the droplet velocity and the flame-spread rate of the premixed spray.