Chemical transformations of tetracyclo[3.3.1.1<Superscript>3,7</Superscript>.0<Superscript>1,3</Superscript>]decane (1,3-dehydroadamantane): IV. Reaction of 1,3-dehydroadamantane with dicarboxylic acids esters

Adamantylation of esters of dicarboxylic acids with 1,3-dehydroadamantane under mild conditions afforded in high yields diesters of (adamantan-1-yl)-substituted unsymmetrical dicarboxylic acids.     

Preparative method of obtaining L- and D-2-hydroxy-3-methylbutyric acids

Summary A preparative method was developed for obtaining L-and D-2-hydroxy-3-methylbutyric acids by the separation of racemic 2-hydroxy-3-methylbutyric acid with the aid of D-and L-threo-2-amino-1-p-nitrophenyl-1,3-propanediols.     

Light-Driven Enzymatic Decarboxylation of Dicarboxylic Acids

Photodecarboxylase from Chlorella variabillis (CvFAP) is one of the three known light-activated enzymes that catalyzes the decarboxylation of fatty acids into the corresponding C1-shortened alkanes. Although the substrate scope of CvFAP has been altered by protein engineering and decoy molecules, it is still limited to mono-fatty acids. Our studies demonstrate for the first time that long chain dicarboxylic acids can be converted by CvFAP. Notably, the conversion of dicarboxylic acids to alkanes still represents a chemically very challenging reaction. Herein, the light-driven enzymatic decarboxylation of dicarboxylic acids to the corresponding (C2-shortened) alkanes using CvFAP is described. A series of dicarboxylic acids is decarboxylated into alkanes in good yields by means of this approach, even for the preparative scales. Reaction pathway studies show that mono-fatty acids are formed as the intermediate products before the final release of C2-shortened alkanes. In addition, the thermostability, storage stability, and recyclability of CvFAP for decarboxylation of dicarboxylic acids are well evaluated. These results represent an advancement over the current state-of-the-art.     

Benzoselenazol-2-ylalkylcarboxylic and benzoselenazol-2-ylarylcarboxylic acids and their derivatives

A preparative method for the synthesis of the previously unknown benzoselenazol-2-ylalkylcarboxylic and benzoselenazol-2-ylarylcarboxylic acids consisting in the condensation of zinc o-aminoselenophenoxide with dicarboxylic anhydrides in the presence of hydrochloric acid is proposed.     

Synthesis and Thermal Behavior of Polyesters Derived from 1,3‐Propanediol and Various Aromatic Dicarboxylic Acids

Abstract

Seven aromatic dicarboxylic acids were esterified by melt polycondensation in two steps with 1,3‐propanediol (1,3‐PDO) in the presence of tetrabutoxytitanium as catalyst. The acids used were: terephthalic (TPA), isophthalic (IPA), naphthalene‐2,6‐dicarboxylic (2,6‐NDA), naphthalene‐1,4‐dicarboxylic (1,4‐NDA), biphenyl‐4,4^′‐dicarboxylic (4,4^′‐BPDA), diphenylsulfone‐4,4^′‐dicarboxylic (4,4^′‐DPSDA), and pyridine‐2,6‐dicarboxylic acid (2,6‐PDA). In the first step, the esterification reaction was monitored, by measuring the distilled water. The prepared oligomers were polycondensated in a second step under high vacuum using the same catalyst as before. The received poly(propylene dicarboxylate)s were characterized by viscometry, carboxyl end‐group content (CC), color measurement, and were studied by differential scanning calorimetry (DSC). From this study, the above polyesters could be classified to three classes: (a) easily crystallizing polyesters derived from TPA and 2,6‐PDA, (b) slow crystallizing polyesters derived from IPA and 2,6‐NDA, and (c) amorphous polyesters derived from 1,4‐NDA, 4,4^′‐BPDA, and 4,4^′‐DPSDA.     

Various flowsheets of actinides recovery with diamides of heterocyclic dicarboxylic acids

Solvents on the base of diamides of heterocyclic dicarboxylic acids are promising alternatives for studied Grouped ActiNide EXtraction (GANEX) solvents. Advantage of these ligands is the possibility of simultaneous extraction not only of residual uranium and plutonium, but also minor actinides—neptunium, americium and curium. Two flowsheets on the base of diamides of heterocyclic dicarboxylic acids for separation of actinides form acidic solutions were developed, tested in laboratory scale and compared. Both flowsheets allow separation of more than 99.95% of actinides from raffinates with high content of lanthanides.     

Modified method for the synthesis of isomeric N-substituted (1<Emphasis Type="Italic">H</Emphasis>-pyrazolyl)propane-1,3-diones

The condensation reaction of isomeric N-substituted (1H-pyrazol-4-yl)ethanones with the ethyl esters of pyrazole carboxylic acids and fluoroacetic acids has been studied using NaH as the base. Under optimized conditions, it proved to be a convenient and preparative method for the synthesis of N-substituted (1H-pyrazolyl)propane-1,3-diones and (1H-pyrazolyl)-4-polyfluorobutane-1,3-diones.     

Quantitative determination of the main aliphatic carboxylic acids in wood kraft black liquors by high-performance liquid chromatography-mass spectrometry

The versatile characterization of organic material and especially of the significant aliphatic hydroxy acids in black liquor is of great importance, for example, in monitoring the progress of the kraft pulping process. This paper describes a simple high-performance liquid chromatographic separation method with atmospheric-pressure chemical ionization mass spectrometry (HPLC-APCI-MS) which was developed for the rapid quantitative analysis of these acids, mainly formed as the alkaline degradation products of feedstock carbohydrates. The fraction of carbohydrate degradation products is mainly composed of hydroxy monocarboxylic and volatile acids (formic and acetic acids) along with lesser amounts of various dicarboxylic acids. This method was thoroughly tested and validated to determine the most abundant nonvolatile low-molecular-mass aliphatic mono- and dicarboxylic acids present in softwood (pine and spruce) and hardwood (birch and aspen) kraft black liquors. This straightforward technique provides, compared to the conventional gas chromatographic methods, some important advantages such as simple sample preparation and a faster analysis time, thus enabling almost real-time monitoring of these acids.     

2-methoxyethanol as a solvent for conductometric acid-base titrations

Conductometric titrations of a series of organic acids in 2-methoxyethanol were performed with 1,3-diphenylguanidine (DPG) as titrant. For benzoic, p-chlorobenzoic and picric acids, phenylphenol and barbital, excellent recoveries were obtained from well-defined conductance vs. volume plots. Results for the dicarboxylic phthalic and adipic acids were also good. However, the titration curves for the difunctional salicylic and p-hydroxybenzoic acids were not clearly defined. The results are discussed and compared with cnductometric titrations of acids in other non-aqueous solvents. Several determinations of electrolyte conductance as a function of concentration revealed that, as expected, the selected substances are weak electrolytes in methoxyethanol.     

1,1,3,3-四甲基胍基衍生物的合成及其与二酸的分子识别性能研究

四甲基胍分别与间苯二甲酰氯和间苯二磺酰氯反应合成了间苯二甲酰四甲基胍和间苯二磺酰四甲基胍,其结构经元素分析,IR,1H NMR和EI-MS表征.核磁滴定研究表明,上述化合物可与二酸形成1 ∶1化学计量络合物,其络合常数在5.33×105～3.68×105.     

Deposition of thin films of organic-inorganic hybrid materials based on aromatic carboxylic acids by atomic layer deposition

Thin films of organic-inorganic hybrid materials have been grown by the atomic layer deposition (ALD) technique, using trimethylaluminium (TMA) and aromatic carboxylic acids such as 1,2-benzene dicarboxylic acid, 1,3-benzene dicarboxylic acid, 1,4-benzene dicarboxylic acid, 1,3,5-benzene tricarboxylic acid, 1,2,4,5-benzene tetracarboxylic acid as precursors. Growth rates as function of temperature show that all systems, with the exception of the benzoic acid-TMA system, possess ALD-windows and provides growth rates in the range of 0.25-1.34 nm/cycle. X-ray diffraction studies of the as-deposited films reveal their amorphous character, which is also supported by very low surface roughness as measured by atomic force microscopy. As-deposited films were investigated by Fourier Transform Infrared Spectroscopy proving that the deposited films are of a hybrid character.     

HPLC of fatty acid esters of mono- and polyhydric alcohols. Part 2: Preparative separation

This paper demonstrates how simply and rapidly fatty acid esters of mono- and polyhydric alcohols can be separated quantitatively in preparative quantities on Lobar® RP-8 packed columns. After the separation of unknown mixtures, the isolated esters are identified from spectroscopic data (IR/NMR) and, after saponification of the ester components (fatty acids and alcohols), from the retention times of gas and high-pressure liquid chromatographic separations. Thus, in particular, sparingly volatile or nonvolatile partial esters of polyhydric alcohols, as well as the long-chained full esters, can be determined qualitatively and quantitatively. The following fatty acid esters of mono- and polyhydric alcohols have been separated: the i-propylesters of the laurinic and myristinic acids, the i-butyl-, i-octyl- and i-octadecyl-esters of the palmitinic and stearic acids, the mono- and di-fatty acid esters of the 1,3-bis-(2-hydroxyethyl)-5,5-dimethylhydantoins, the mono-, di- and tri-esters of the trimethylalpropane and the full esters of the pentaerythrite.     

Synthesis and Primary Antitumor Screening of 4-[5-(1H-Indol-3-ylmethylidene)-4-oxo-2-sulfanylidene-1,3-thiazolidin-3-yl]butanamides

Russian Journal of Organic Chemistry - A preparative procedure was developed for the synthesis of 4-[5-(1-R-1H-indol-3-ylmethylidene)-4-oxo-2-sulfanylidene-1,3-thiazolidin-3-yl]butanoic acids which...     

Synthesis of bis-fused tetrathiafulvalene with mono- and dicarboxylic acids

Bis-fused tetrathiafulvalenes with mono- and dicarboxylic acids, 2-{5-(1,3-dithiol-2-ylidene)-[1,3]dithiolo[4,5-d][1,3]dithiol-2-ylidene}-1,3-dithiole-4-carboxylic acid (1) and 2-{5-(1,3-dithiol-2-ylidene)-[1,3]dithiolo[4,5-d][1,3]dithiol-2-ylidene}-1,3-dithiole-4,5-dicarboxylic acid (2) have been synthesized. The electronic structure of 1 and 2 was examined from their optical absorption spectra and using density-functional calculations.     

Role of the charge in continuous beds in the chiral separation of hydroxy acids by ligand-exchange capillary electrochromatography

This paper deals with the chiral separation of hydroxy acids using diallyl-dimethylammonium chloride as a positive charge-providing agent in the continuous bed. The chiral continuous bed was prepared by in situ copolymerization of monomers, including an L-4-hydroxyproline derivative as a chiral selector. This phase was applied to the chiral separation of hydroxy monocarboxylic acids and hydroxy dicarboxylic acids, respectively. The influence of both the selector concentration and the charge-providing agent on retention and separation was investigated.     

Immobilization of pyrene on quartz plate surface via a flexible long spacer and its sensing properties to dicarboxylic acids

It is known that polycyclic aromatic hydrocar-bons (PAHs) form excimer easily, and show both monomer and excimer emission in polar medium[1]. This character comes from their hydrophobic nature and plane structures. The ratio of the intensity of ex-cimer emission to that of monomer emission is a func-tion of distance between neighbouring PAHs in a sys-tem. It is not difficult to understand that many factors, such as the concentration of PAHs, temperature, pres-ence and concentration of othe…     

Cascade and commutative self-assembles of nanoscale three-component systems controlled by the conformation of thiacalix[4]arene

In this work, the formation of two- and three-component supramolecular systems based on cone, partial cone, 1,3-alternate stereoisomers of heteroditopic "hosts": p-tert-butylthiacalix[4]arene containing 4-amidopyridine fragments with silver(I) cations and dicarboxylic acids in liquid and solid phases were studied by UV spectroscopy, dynamic light scattering, and atomic force microscopy methods. It has been shown that these macrocycles are coreceptors, capable of simultaneously binding silver(I) cations, dicarboxylic acids (oxalic, malonic, succinic, maleic, fumaric acids), and hydroxyl acids (glycol, tartaric acids). For the first time, by the dynamic light scattering method, it has been shown that the conformation of p-tert-butyl thiacalix[4]arenes significantly affects the type of three-component system formed: cone is characterized by the formation of cascade systems; for partial cone, intermediate systems; and for the 1,3-alternate stereoisomers, three types of three-component systems (cascade, intermediate, and commutative) were observed.     

Ionic solid-state dimers and polymers derived from imidazolium dicarboxylic acids

A series of imidazolium dicarboxylic acids have been prepared from the reaction of the 1,3‐bis(carboxymethyl)imidazolium zwitterion with the Brønsted acids HX (X=F, Br, Cl, ClO₄). The structures of these acids have been established in the solid state by single‐crystal X‐ray diffraction, which revealed that the cations and anions form strong hydrogen bonds through O? H???X interactions, leading to the formation of dimeric and polymeric networks. These acids react with elemental zinc and cobalt to form stable polymeric coordination complexes, some of which have also been characterised by X‐ray diffraction.     

Analysis of drying oils used as binding media for objects of art by capillary electrophoresis with indirect UV and conductivity detection

Capillary electrophoresis (CE) was applied to analyse the long-chain fatty acid composition of vegetable oils, and their degradation products formed upon ageing when drying oils are used as binding media. The analytes were detected with contactless conductivity detection (CCD) and indirect UV absorption, both detectors positioned on-line at the separation capillary. The long-chain fatty acids were resolved in a background electrolyte (BGE) consisting of phosphate buffer (pH = 6.86, 15 mM) containing 4 mM sodium dodecylbenzensulfonate, 10 mM Brij 35, 2% (v/v) 1-octanol and 45% (v/v) acetonitrile. As in this system dicarboxylic analytes, the products of oxidative degradation of unsaturated fatty acids, cannot be determined, a suitable background electrolyte was developed by the aid of computer simulation program PeakMaster. It makes use of a 10 mM salicylic acid, 20 mM histidine buffer, pH 5.85, which combines buffering ability with the optical properties obligatory for indirect UV detection. This buffer avoids system eigenpeaks, which are often impairing the separation efficiency of the system. Separation of the dicarboxylic analytes was further improved by a counter-directed electroosmotic flow (EOF), obtained by dynamically coating the capillary wall with 0.2 mM cetyltrimethylammonium bromide. Long-chain fatty acids and their decomposition products could be determined in recent and aged samples of drying oils, respectively, and in samples taken from two paintings of the 19th century.     

Synthesis of poly(1,3,4-oxadiazole)s by direct polycondensation of dicarboxylic acids with hydrazine sulfate using phosphorus pentoxide/methanesulfonic acid as condensing agent and solvent

A convenient method for the synthesis of poly(1,3,4-oxadiazole)s of high molecular weights has been developed. These polymers were prepared readily by the direct polycondensation of dicarboxylic acids with hydrazine sulfate ( 1 ) using phosphorus pentoxide/methanesulfonic acid (PPMA) as both a condensing agent and solvent. Polycondensation of aliphatic dicarboxylic acids with 1 proceeded even at room temperature and produced poly(1,3,4-oxadiazole)s with inherent viscosities up to 1.4 dL/g. The synthesis of aromatic poly(1,3,4-oxadiazole)s from aromatic dicarboxylic acids containing phenyl ether structures was carried out by a one-pot procedure because the preactivation of dicarboxylic acids was required. The synthesis of 2,5-disubstituted-1,3,4-oxadiazoles by the reaction of carboxylic acids with 1 in PPMA was studied to demonstrate the feasibility of the reaction for polymer formation. The thermogravimetry of the aromatic poly(1,3,4-oxadiazole)s showed 10% weight loss both in air and in nitrogen at 440–490°C.