Equilibrium analysis of reactions of metal-pyridylazoresorcinolato chelates with quaternary ammonium ion, nonionic surfactant and polyethylene glycol in aqueous solution by capillary zone electrophoresis.

The resolutions of metal-4-(2-pyridylazo)resorcinol chelates by capillary zone electrophoresis (CZE) were investigated in the presence of some interacting reagents; also, equilibrium reactions between the chelates and the interacting reagents were analyzed in an aqueous solution. Among nine metal chelates formed in aqueous solution, the chelates of VV, FeII, CoIII, NiII, and CuII were resolved and detected by CZE, while other chelates were decomposed during electrophoretic migration. The electrophoretic mobility of the chelates of FeII, NiII, and CuII increased with increasing pH of the migrating solution; also, the acid-dissociation constants of these three chelates were determined by analyzing the mobility change. The ion-association constants of the five anionic chelates and pyridylazoresorcinolate ion with quaternary ammonium ions were also determined by analyzing the mobility change. The binding behavior of the ligand and its chelates with nonionic surfactant micelle, as well as with polyethylene glycol, were investigated, and their binding constants were determined through the mobility change. When Brij 35 was used as a nonionic surfactant interacting with the anionic chelates, the FeII chelate decomposed at Brij 35 concentrations over 6.67 mM. The equilibrium constants and the reactivity were compared with each other.     

Quantitative capillary zone electrophoresis of inorganic anions

Despite the availability of commercial capillary electrophoresis systems for over ten years, where quantitative analysis is required, capillary zone electrophoresis (CZE) has often failed to replace ion chromatography as the method of choice for a large number of analytes, not least inorganic anions. To investigate the reasons for this apparent failing, a review is presented of work that has been carried out to-date involving the quantitative application of CZE to the determination of inorganic anions in industrial and environmental samples. This review summarizes work both investigating and improving the quantitative aspects of the CZE of inorganic anions. A complete survey of how CZE has been applied to the determination of inorganic anions in real samples is given, including what, if any, analytical performance parameters were investigated and quoted, and if quality assurance data and validation methods were briefly considered, thoroughly investigated or simply ignored.     

Simultaneous separation of inorganic anions and cations by capillary zone electrophoresis

A new capillary electrophoretic approach for simultaneous separation of fast anions and cations is demonstrated. Indirect UV detection at 214 nm in conjunction with electromigration sampling from both ends of the capillary was developed. Two electrolyte systems based on imidazole-nitrate and copper(II)-ethylenediamine-nitrate were investigated for the simultaneous separation of chloride, sulphate, hydrocarbonate, potassium, ammonium, calcium, sodium and magnesium ions. Experimental parameters that were evaluated included a nature of UV chromophore, pH of electrolyte, a nature of complexing agent. The method permits the excellent separation of three anions and five cations in only 4 min using electrolyte system containing 2.5 mmol l⁻¹ Cu(NO₃)₂, 5 mmol l⁻¹ ethylenediamine and 1 mmol l⁻¹ fumaric acid at pH 8.5 adjusted with tetraethylammonium hydroxide.     

Pseudo-homogeneous micelle extraction of ion-associates formed between tetrabutylammonium ion and some aromatic sulfonate ions into nonionic surfactant micelle studied through the mobility measurements in capillary zone electrophoresis

Ion-association extraction of some aromatic sulfonate ions including alkylbenzene sulfonates with tetrabutylammonium ion (TBA+) into nonionic surfactant micelle has been investigated through the changes in the electrophoretic mobility. Nonionic surfactants of Brij 35 and Brij 58 were used as micelle substrates to which the ion-associates formed could distribute. The electrophoretic mobility of the aromatic sulfonate ions was measured by capillary zone electrophoresis in the presence of TBA+ and/or the nonionic surfactant to determine ion-association constants (K(ass)), binding constants of the anions to the nonionic surfactant micelle (K(B)), and binding constants of the ion-associates to the nonionic surfactant micelle (K(B,IA)). Nonlinear phenomena induced with the alkyl chain moiety were observed on K(ass) and K(B) by its linear structure and the mixed micelle formation, respectively. Larger K(B) values were obtained with Brij 58 as micelle matrix than with Brij 35, while the differences in K(B,IA) were small between Brij 58 and Brij 35.     

Optimization of separations of alkyl-substituted phenolate anions by capillary zone electrophoresis

Anions of alkylphenols have very similar electrophoretic mobilities in CZE owing to their very small differences in size and the narrow range of their pK_a values. By studying electrophoretic mobility as a function both of pH and of the amount of acetonitrile in the electrolyte solution, optimum separation conditions were determined. It was possible to separate a group of methyl-substituted phenols, including several positional isomers. Mixtures containing n-propyl and isopropyl phenols and 1°, 2°, and 3° butylphenols could be resolved.     

Separation of arsenic anions by capillary zone electrophoresis with UV detection

Summary Capillary zone electrophoresis (CZE) in capillary silica columns has been used for the separation of arsenite (AsO ₂ ^– ), arsenate (AsO ₄ ^3– ), monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA). The separation of these ionic species has been achieved using a capillary silica column (72 cm×50 m i.d.) with an acidic phosphate buffer and with an on-column UV detection (190 nm). Optimization of experimental parameters (pH, temperature, voltage) were studied. The selectivity of the separation can be improved by working in the pH-range of 4.5–6.5. For analytical inorganic separations of UV-absorbing anions, capillary zone electrophoresis has advantages because of the relatively simple equipment, the short analysis time (15 min), the high efficiency and the low mass detection limit (40 pg for arsenate).     

Simultaneous determination of inorganic anions, carboxylic and aromatic carboxylic acids by capillary zone electrophoresis with direct UV detection

Co-electroosmotic capillary zone electrophoresis (CZE) with direct UV detection was developed for simultaneous determination of inorganic anions, carboxylic and aromatic carboxylic acids. These solutes were separated using a 30 mM phosphate buffer containing 1.0 mM tetradecyltrimethylammonium bromide (TTAB) and 20% (v/v) acetonitrile at pH of 6.5 and directly detected by UV at 190 nm. Calibration curves were linear in the range 0.01-2.0 mM, depending of the solutes. The detection limits ranged from 1.0 to 8.0 microM and the relative standards deviations (n=5) in range from 1.9 to 3.6% for the peak area. The proposed method was used to determine inorganic anions and carboxylic and aromatic acids in soil and plant tissue extracts.     

Direct analysis of inorganic anions in samples with high salt content by capillary zone electrophoresis

Trace-level inorganic anions in seawater are separated efficiently by capillary zone electrophoresis using direct UV detection. The carrier electrolyte is 50 mM borate at pH 9.3 and contained 1.5M NaCl. This buffer solution is adopted to prevent interference from high concentrations of the chloride ion in seawater. No electro-osmotic flow reverser is used to shorten the analysis time. The experimental conditions such as the concentration of NaCl in the carrier electrolyte, capillary inner diameter, applied current, and temperature are optimized. Linear plots are obtained in the concentration range of 0.1 to 20 microg/mL. The quantitation limits of the anions are in the order of 0.02 to 0.1 microg/mL. The proposed method may be applicable to the determination of inorganic anions in other environmental samples and effluents of a power plant.     

Comparison between capillary electrophoresis and ion-chromatography for analysis of inorganic anions

Separation and detection of some selected inorganic anions with capillary electrophoresis are shown. The anions are separated in microbore capillaries (25 m* 0.2 m) and detected with a UV-detector. Results are compared with the method of ion exchange chromatography. In consideration of the most important physical and chemical parameters an easy kind of computer simulation for such electropherograms was developed.To get optimal results of separation and UV-detection in capillary electrophoresis some parameters of the device HPE 100, i.e. loading time in the electrokinetic sample injection mode and the running voltage are varied. The behaviour of absorption in the UV region of the chosen anions as well as the influence of pH values in retention behaviour are investigated. There is a simple way to calculate the electrophoretic mobilities from known retention times. Approximate limits of detection for all anions and for each technique are given.     

Cooperative binding of nonionic surfactant to hydrophobically modified polyanions as studied by frontal analysis continuous capillary electrophoresis

The binding of a nonionic surfactant, Triton X-100 (TX), to amphiphilic copolymers of sodium 2-(acrylamido)-2-methylpropanesulfonate and N-dodecylmethacrylamide (C12) (p(A/C12(x)), where x denotes the mol % content of C12) was investigated by frontal analysis continuous capillary electrophoresis (FACCE) combined with dynamic light scattering focusing on the effect of the hydrophobe content on the binding in a wide range of x (5-60 mol %). From binding isotherms obtained from FACCE data, the binding was found to be cooperative in the whole range of x. Furthermore, a significant change in the binding behavior, i.e., cooperativity, was found to occur in a relatively narrow range of x (38-50 mol %), which is attributable to a change in the self-association behavior of p(A/C12(x)) in this x range.     

Evaluation of weak ion association between tetraalkylammonium ions and inorganic anions in aqueous solutions by capillary zone electrophoresis

The evaluation of weak ion association between eleven (11) inorganic anions (charge -1 to -3) and five n-tetraalkylammonium ions, R4N+ (R: methyl, Me; ethyl, Et; propyl, Pr; butyl, Bu; pentyl, Am) in aqueous media at 25 degrees C was studied. The analysis of ion association equilibria was carried out under acidic condition (formate buffer, pH 3.5) at low separating potential (-10 kV) using a coated capillary with suppressed electroosmotic flow (micro = 4 x 10(-5) cm2 V(-1) s(-1)). Direct UV detection was done at anode (lambda = 220 nm). The combination of the aforementioned conditions ensured that ion association constants, Kass, between n-tetraalkylammonium ion and the small inorganic anions were reliably determined after a non-linear least squares (NLLS) treatment of the measured anion's mobility. Like their larger counterparts, small anions showed increased interaction with an increase in size of pairing ions. Moreover, for a specific cation, the interaction of small anions increased with an increase in size of the hydrated anions as reflected by the relationship between the Kass and the Stokes' radius. A favourable comparison exists between the results presented in this work and those previously documented from other analytical techniques like conductometry. Qualitatively, the mobility of the anions appeared to obey the Hückel's model more closely than the more elaborate Zwanzig and Hubbard-Onsager models.     

Optimization of conductivity detection of low-molecular-mass anions in capillary zone electrophoresis

The optimization of background electrolyte compositions for capillary zone electrophoresis in combination with conductivity detection focusing on maximal detector response is discussed. A theoretical approach pointing out the influence of the electrolyte co- and counter-ion mobilities on the detector signal has been developed. Using this model, running buffer compositions providing optimum S/N ratios for the selected analytes could be calculated. The results derived from these examinations have been verified by experimental investigations, namely the determination of inorganic and organic anionic solutes.     

Interaction behavior in ultrafiltration of nonionic surfactant micelles by adsorption

Adsorption of nonionic surfactant micelles onto ultrafiltration (UF), membranes was studied. Two homologous series of nonionic surfactants, namely, Tritons (alkylphenol ethoxylates) and Neodols (alcohol ethoxylates), were used to characterize surface properties of two polymeric ultrafiltration membranes with 20,000 nominal cutoff. Particularly, a cellulose acetate and a polysulfone membrane were investigated. Static adsorption experiments were carried out using surfactant solutions at concentrations above their critical micelle concentration. The characterization of surface properties of UF membranes was based on the adsorption behavior of surfactant species. The adsorption extent on UF membranes was affected by the hydrophobicity-to-hydrophilicity ratio mainly determining the interactions developed at the membrane-surfactant species interface. Adsorption experimental data seem generally to fit the Langmuir isotherm model. Atomic force microscopy was used to examine the alteration of the top membrane surface morphology.     

Separation of nicotine metabolites by capillary zone electrophoresis and capillary zone electrophoresis/mass spectrometry

The use of capillary zone electrophoresis (CZE) and capillary zone electrophoresis/mass spectrometry (CZE/MS) has been demonstrated, in principle, for the separation of nicotine and nicotine metabolites. The buffer system developed for separation and detection by CZE/UV was modified for use in CZE/MS analysis. Several of the metabolites are isobaric and tandem mass spectrometric (MS/MS) techniques have been used to differentiate such analytes.     

A novel method for analysis of explosives residue by simultaneous detection of anions and cations via capillary zone electrophoresis

A novel electrolyte has been developed for the simultaneous separation of cations and anions in low explosive residue by capillary electrophoresis. This electrolyte contains 15 mM α-hydroxyisobutyric acid (HIBA) as the buffer, 6 mM imidazole as the cation chromophore, 3 mM 1,3,6-naphthalenetrisulfonic acid (NTS) as the anion chromophore, 4 mM 18-crown-6 ether as a cation selectivity modifier, and 5% (v/v) acetonitrile as an organic modifier. The pH was adjusted to 6.5 using tetramethylammonium hydroxide (TMAOH), an electroosmotic flow modifier. The method was optimized by varying the concentrations of α-HIBA, imidazole, and 1,3,6-NTS at three different pH values. The results provided a simultaneous indirect photometric analysis of both anions and cations with detection limits ranging from 0.5 to 5 ppm for anions and from 10 to 15 ppm for cations with a total run time of under 7 min. The method was then applied to the analysis of Pyrodex^® RS and black powder, as well as several smokeless powders. The results obtained were consistent with previously reported results for separate anion and cation analysis and provide a faster, more complete analysis of each sample in a single chromatographic run.     

Interaction between netropsin and double-stranded DNA in capillary zone electrophoresis and affinity capillary electrophoresis

Poor sensitivity and low phase ratio are the main drawbacks of open tubular capillary electrochromatography (OTCEC). The poor sensitivity results from the use of narrow bore size capillary, whereas the low phase ratio, which limits the separation capability, is caused by the limited surface area of conventional capillary. Two strategies may be useful to overcome these disadvantages. First, an extended light path (ELP) capillary, which has a bubble cell at the detection point, is used to improve the sensitivity. Secondly, an etched capillary of a 1,000-fold increased surface area is used to enhance the phase ratio. In this work, use of an ELP capillary and an etched capillary in OTCEC was evaluated with a chiral stationary phase of avidin prepared with the physical adsorption method. With a 20 microm I.D. ELP capillary with a 150 microm bubble cell, the peak height was enhanced by 4-10-fold and the corrected peak area was increased by 12-fold relative to a 20 microm I.D. conventional capillary. However, the peak efficiency and resolution decreased noticeably. The phase ratio on the etched capillary was slightly enhanced, by a factor of 1.64 relative to an unetched capillary. Consequently, the separation capability was slightly improved. The increase in the phase ratio was much lower than that expected from the increase in surface area, the reason for which is probably the reduced density of surface silanol group and the generation of nitrogen-containing groups due to the etching process.     

On-line sample concentration of organic anions in capillary zone electrophoresis by micelle to solvent stacking

Micelle to solvent stacking (MSS) is a new on-line sample concentration technique for charged analytes in capillary zone electrophoresis (CZE). Sample concentration in MSS mainly relies on the reversal in the effective electrophoretic mobility of the analyte at the boundary zone between the sample solution (S) and CZE background solution (BGS) inside the capillary. The basic condition for MSS is that the S is prepared in a matrix that contains an additive (i.e., micelles) which interacts with and has an opposite charge compared to the analytes. In addition, the BGS must contain a sufficient percentage of organic solvent. MSS was first reported for organic cations using anionic dodecyl sulfate micelles as additive in the S and methanol or acetonitrile as organic solvent in the BGS. Here, theoretical and experimental studies on MSS are described for organic anions using cationic cetyltrimethyl ammonium micelles as additive in the S and methanol as organic solvent in the BGS. Up to an order of magnitude improvement in concentration sensitivity was obtained for the test hypolipidaemic drugs using MSS in CZE with UV detection. The optimized method was also evaluated to the analysis of a spiked wastewater sample that was subjected to a simple extraction step.     

On-line sequential preconcentration of inorganic anions by anion-selective exhaustive injection and base-stacking in capillary zone electrophoresis

A sequential electrostacking method based on anion-selective exhaustive injection (ASEI) and base-stacking (BS) is presented for the preconcentration and determination of inorganic anions by capillary zone electrophoresis (CZE) in this paper. Tetradecyltrimethylammonium bromide as an electroosmotic flow (EOF) modifier was added into the buffer to suppress EOF of the capillary. Firstly, a water plug was hydrodynamically injected into the capillary. During ASEI under negative high voltage, the sample anions migrated quickly towards the boundary between the water plug and buffer in the capillary. Then an alkaline zone was injected electrokinetically to concentrate the anions further. With the sequential electrostacking method, the preconcentration factor of (0.8-1.3) x 10(5) was obtained compared with the conventionally electrokinetic injection and the relative standard deviation of peak area was 3.3-5.3% (n = 5). The detection limits of ASEI-BS-CZE for six inorganic anions were 6-14 ng/L. The proposed method has been adopted to analyze six anions in cigarette samples successfully.     

Evaluation of coelectroosmotic capillary zone electrophoresis for the rapid analysis of twelve aromatic sulphonate compounds

Summary Coelectroosmotic capillary zone electrophoresis (CZE) has been investigated as a means of rapid analysis of twelve aromatic sulphonate compounds. The main factors affecting reversal of electroosmotic flow (EOF)—type of osmotic modifier and concentration-were studied. Two types of osmotic modifier, an alkylammonium salt (cetyltrimethylammonium bromide, CTAB) and a cationic polyelectrolyte (hexadimentrine bromide, HDB) were investigated. The composition of the running buffers was optimized according to the characteristics of each osmotic modifier. A concentration of HDB as low as 0.0001% (w/v) was used successfully to provide a stable and reversed EOF.