0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3单晶/环氧树脂1-3型复合材料的压电性能研究

模拟了0.7Pb(Mg_1/3Nb_2/3)O₃-0.3PbTiO₃(PMN-0.3PT)单晶1-3型压电复合材料的性能与单晶体积分数的关系,得出性能最优时压电相的体积分数为64%, 在这一体积分数下,采用切割-填充法,并使用了不同类型的环氧树脂填充制备复合材料.系统地研究了聚合物相对复合材料性能的影响,研究表明,减小聚合物相的刚度系数c和密度ρ有利于提高复合材料的性能,且聚合物相与压电相的结合强度对性能的影响非常明显,制备的PMN-0.3 PT单晶1-3型复合材料的厚度伸缩机电耦合系数k_t高达90.1%,压电系数d₃₃大于1000pC/N,机械品质因数Q_m为10.39,声阻抗Z也大大降低,性能明显优于传统的Pb(Zr_xTi_1-x)O₃(PZT)陶瓷及其1-3复合材料,在压电换能器和传感器中显示出广阔的前景. 关键词： PMN-PT单晶 压电复合材料 压电相 聚合物相     

铁电单晶0.62Pb(Mg1/3Nb2/3)O3-0.38PbTiO3折射率的研究

用最小偏向角法在20℃下精确测量了0.62Pb(Mg1/3Nb2/3)O3-0.38PbTiO3(0.62PMN-0.38PT)单晶的折射率,给出了该温度下折射率色散的Sellmeier方程.研究了能带结构与折射率的关系,计算了样品的Sellmeier光学系数:对no,E0=5.50eV,λ0=0.226μm,S0=1.004×1014m-2,Ed=28.10eV;对ne,E0=5.57eV,λ0=0.223μm,S0=1.017×1014m-2,Ed=28.10eV.ABO3型钙钛矿材料中,BO6八面体基元决定了晶体的能带结构,对折射率产生重要影响.     

布里渊散射决定0．67Pb（Mg1／3Nb2／3）03-0．33PbTiO3单晶的弹性、压电和介电常数

我们报道了用高分辨布里渊散射,确定0．67Pb（Mg1／3Nb2、3）O2-0．33PbTiO2单晶中的弹性、压电和介电常数．所有的实验数据都是在一块沿[001]方向的极化的单晶样品上获得的。我们实验中得到的这些常数的数值和以往超声共振技术获得的数值相似。我们还研究了压缩模和剪切模在（010）和（001）平面内的方向依赖性。TA1和TA2模式的强度对散射角度有很强列依赖性。在散射角度为45°～65°内,一个新的峰出现在～18GHz附近。它可能与晶体中的微观不均匀性或者局域微结构相关。     

弛豫铁电单晶0.93Pb(Zn1/3Nb2/3)O3-0.07PbTiO3的电光性能研究

以波长为632.8 nm的He-Ne激光作为光源,研究了三方相弛豫铁电单晶0.93Pb(Zn1/3Nb2/3)O3-0.07PbTiO3在室温下的折射率和线性电光性质.通过测量晶体的布儒斯特角,确定了单晶的两个主轴折射率:no=2.466,ne=2.488.利用改进的马赫-泽德尔干涉法测量了单晶的线性电光系数:r33=71 pm/V,r13=4 pm/V.计算得到有效电光系数rc=67 pm/V及半波电压Vπ=610 V.单晶优异的电光性能使其在激光调制与偏转领域有着巨大的应用潜力.     

布里渊散射决定0.67Pb(Mg_(1/3)Nb_(2/3))O_3-0.33PbTiO_3单晶的弹性、压电和介电常数(英文)

我们报道了用高分辨布里渊散射,确定0.67Pb(Mg1/3Nb2/3)O3-0.33PbTiO3单晶中的弹性、压电和介电常数.所有的实验数据都是在一块沿[001]方向的极化的单晶样品上获得的。我们实验中得到的这些常数的数值和以往超声共振技术获得的数值相似。我们还研究了压缩模和剪切模在(010)和(001)平面内的方向依赖性。TA1和TA2模式的强度对散射角度有很强列依赖性。在散射角度为45°~65°内,一个新的峰出现在~18 GHz附近。它可能与晶体中的微观不均匀性或者局域微结构相关。     

Polarization switching by stretched exponential functions in 0.7Pb(Mg1/3Nb2/3)O3–0.3PbTiO3

Polarization reversal and domain dynamics have been investigated in 0.7Pb(Mg_1/3Nb_2/3)O₃–0.3PbTiO₃ using a method of current transients. Investigations were performed as a function of applied electric field. The kinetics of the transients have been modelled by a stretched-exponential-type function.     

1-3型压电复合材料

1－3型压电复合材料是目前研究和应用得比较广泛的一种压电材料．本文简述了这种压电复合材料的理论模型、制作方法和实验结果；指出除了圆形PZT压电材料所具有的径向模和厚度模以外，1－3型压电复合材料还具有横向结构模．本文介绍了这种压电复合材料的特点，如低声阻抗、低介电常数、高静水压压电常数以及PZT相分布的可控制性等．这些特点有利于改善压电复合材料换能器的时间响应和空间响应．     

布里渊散射决定0.67Pb(Mg1/3Nb2/3)Ｏ3－0.33ＰbTiO3单晶的弹性、压电和介电常数

我们报道了用高分辨布里渊散射,确定0.67Pb(Mg1/3Nb2/3)Ｏ３－０．３３ＰbTiO3单晶中的弹性、压电和介电常数.所有的实验数据都是在一块沿［001］方向的极化的单晶样品上获得的。我们实验中得到的这些常数的数值和以往超声共振技术获得的数值相似。我们还研究了压缩模和剪切模在(010)和(001)平面内的方向依赖性。TA1和TA2模式的强度对散射角度有很强列依赖性。在散射角度为45°~65°内, 一个新的峰出现在~18 GHz附近。它可能与晶体中的微观不均匀性或者局域微结构相关。     

铁电单晶Pb(Mg1/3Nb2/3)O3-PbTiO3的高场致应变及其在层叠式驱动器中的应用

通过研究(1-x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (PMNT)单晶在不同方向、不同组分下高场致应变的特性,确定了〈001〉取向PMNT单晶(29%≤x≤31%)为制作层叠式驱动器的最佳组分范围,这组分的单晶具有高场致应变、低滞后而且性能较稳定的特点.研究结果表明,在保证应变曲线的线性和低滞后的前提下,将近-2kV/cm的负电场能够运用于〈001〉方向的PMNT晶体上. 40层(每片晶片尺寸为7mm×7mm×0.7mm)PMNT层叠式驱动器在电场 -1.5-10kV/cm的驱动下,可以获得38.1μm的纵向位移,负载40N的重量后,位移量减为34μm.     

Field-induced piezoelectric response in Pb(Mg1/3Nb2/3)O3–PbTiO3 single crystals

The electric field induced strain, piezoelectric and electromechanical response in relaxor based single crystal piezoelectrics (1−x)Pb(Mg_1/3Nb_2/3)O₃–xPbTiO₃(PMNT100x) were investigated as a function of dc bias and temperature along the crystallographic [001] orientation. With increasing temperature and dc bias, monoclinic and rhombohedral phases were found to coexist in the crystals, exhibiting large strain hysteresis, while above a threshold temperature and dc bias, the induced monoclinic and tetragonal phases were found to show very low strain hysteresis. The electric field level for the monoclinic to tetragonal phase transformation was found to exponentially decay with temperature. The mechanical quality factor Q for the tetragonal phase exhibits higher values when compared to rhombohedral and monoclinic phases, displaying improved domain stability. The domain stability of tetragonal crystals as a function of sample thickness was also studied, it was found that a higher dc bias was needed for thinner tetragonal crystals in order to stabilize the single domain configuration and reduce the strain hysteresis.     

Effect of bias field on the dielectric properties of 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 single crystals with different orientations

Microdomain-macrodomain transformations and phase transitions in 0.7Pb(Mg_1/3Nb_2/3)O₃-0.3PbTiO₃ single crystals were investigated by studying their relative permittivity under various dc bias at constant heating and cooling rates. The orientation dependence of the bias field effect was revealed by examining the temperature dependence of relative permittivity as a function of crystal orientation (the 111, 011 and 001 directions) and dc bias field. The crystals have a microdomain rhombohedral ferroelectric state in the ferroelectric phase under zero dc bias. External bias field could modulate the domain state and induce a macrodomain state in the crystals. Also, it is proposed that the dc bias applied along the 001 or 011 direction could induce a tetragonal ferroelectric phase or an orthorhombic ferroelectric phase, respectively, in an intermediate temperature range. PACS 77.80.-e; 77.22.-d; 81.40.-z     

Investigation of domain behaviour in 0.7Pb(Mg1/3Nb2/3) O3-0.3PbTiO3 single crystals at different temperatures in the transmission electron microscope

Using transmission electron microscopy, in-situ changes in ferroelastic domains in 0.7Pb(Mg_1/3Nb_2/3)O₃-0.3PbTiO₃ single crystals were observed at 60 to -163°C. At -163°C, the microscopic tweed morphology of the ferroelastic domains rotated by 90°, and certain orientation changes in the mesoscopic sawtooth domains took place. At this temperature, the ferroelastic domains became coarsened and certain S-shaped mesoscopic domains were reshaped. The disappearance and/or changes in the orientations of both the sawtooth and the ferroelastic domains were reversible upon return to room temperature. On heating to 60°C, both the mesoscopic sawtooth and the microscopic tweed domains were stable below 53°C. Above 53°C, the mesoscopic walls disappeared and the contrast of the tweed domains became blurred. Upon return to room temperature from 60°C, the mesoscopic domain patterns could not be retrieved, indicating that the transformation was irreversible. The morphology of the tweeds at this temperature indicated a structural transition from a two-variant domain state to a multivariant state, eliminating mesoscopic boundaries.     

Heat capacity of the 0.7PbNi1/3Nb2/3O3-0.3PbTiO3 ferroelectric ceramics

The temperature dependence of the heat capacity of the 0.7PbNi_1/3Nb_2/3O₃-0.3PbTiO₃ compound has been studied in the temperature range 120?C800 K. The temperature dependence of the heat capacity C _p has two diffuse anomalies in the temperature ranges 250?C450 K and 450?C650 K and a ?? anomaly at temperatures T ?? 225 K. The results are discussed with inclusion of the dielectric and structural data.     

弛豫型铁电单晶0.67Pb(Mg_(1/3)Nb_(2/3))O_3-0.33PbTiO_3的拉曼散射研究

本文采用拉曼散射技术在温度从374到-196℃的范围内,研究了弛豫型铁电单晶0.67Pb(Mg1/3Nb2/3)O3-0.33PbTiO3(PMNT)。观察了在不同温度下拉曼光谱的变化,经分析这些变化反映了该晶体经历了两个相变:第一个相变温度发生在120℃,从顺电立方相到铁电四方相的相变,780 cm-1处模式在VH偏振下的改变标志了这一相变;第二个相变温度发生在34℃,是从铁电四方相到铁电三方相的相变,软模的出现代表了这一相变。     

Photorefractive effect in the relaxor ferroelectric material 0.91Pb(Zn1/3Nb2/3)O3-0.09PbTiO3

The photorefractive effect in a nominally undoped 0.91Pb(Zn1/3Nb2/3)O3-0.09PbTiO3 single crystal is measured. We report what is, to our knowledge, the first observation of the photorefractive effect in Pb-based relaxor ferroelectric crystals. The crystal is grown by the flux solution method. Then it is cut into a 2 mm x 4 mm x 8 mm piece and electrically poled along the [111] direction. The coupling constant of the two-wave mixing is 17 cm(-1), and the normalized time constant under 1-W/cm(2) illumination is 12 s at a wave-length of 476 nm. The effective trap density is calculated as 5 x 10(16) cm(-3) from the Debye screening length under the assumption of Kukhtarev's band-transport model. The dominant carrier is identified to be holes from the direction of two-wave mixing energy transfer.     

等静压下0.75Pb（Mg1/3Nb2/3）O3-0.25PbTiO3陶瓷的介电性能研究

研究了等静压对0.75Pb（Mg_1/3Nb_2/3）O₃-0.25PbTiO₃（PMN-25PT）陶瓷介电温谱的影响,PMN-25PT剩余极化随等静压变化和等静压压致相变.结果表明,随着压力增加,PMN-25PT的介电峰值温度T_m降低,/+{dT_m}/-{dP}≈-4℃/kbar,极化弛豫增强;剩余极化随压力增加连续减小;介电常数对压力的依赖关系与对温度场的依赖相似,压力诱导PMN-25PT发生弛豫铁电—顺电相变,相变为宽化的渐变过程,频率色散和极化弛豫更加强烈和普遍. 关键词： 铌镁酸铅-钛酸铅 等静压 介电弛豫 压致相变     

Growth of high performance piezoelectric crystal Pb(Zn1/3Nb2/3)O3-PbTiO3 using PbO flux

Novel piezoelectric crystal (1 − x)Pb(Zn_1/3Nb_2/3)O₃-xPbTiO₃ (PZNT) has attracted much attention due to its high piezoelectric properties and potential applications in medical ultrasonic devices, sonar transducers, solid state actuators. However, the applications of PZNT crystals are limited by the lack of a simple and reproducible growth technique. In this work, large size PZNT crystals were grown by the vertical Bridgman method using 50 mol% PbO as a flux. The growth conditions were optimized as mole ratio of raw materials and flux = 1:1, soaking temperature 1150-1200 °C, soaking time 10 h, the lowering rate of the crucible 0.5 mm/h and the temperature gradient near solid-liquid interface about 50 °C/mm. The maximum size of as-grown PZNT crystal was about 60 mm in length. The crystal was oriented and its piezoelectric constant d₃₃ and coupling coefficient k₃₃ were measured over 2000 pC/N and 0.92, respectively.