In‐situ characterization of the early stage of pipeline steel corrosion in bicarbonate solutions by electrochemical atomic force microscopy

An electrochemical atomic force microscope was used to characterize the early stage of corrosion of an X100 pipeline steel in bicarbonate solutions with varied concentrations by synchronous measurements of electrochemical potential of the steel and its topographic evolution with time. Upon immersion of the steel in 0.01 M NaHCO₃ solution, both electrochemical potential and topographic profile are associated with the dissolution of air‐formed oxides present on the steel surface. The potential drops and the surface roughness increases rapidly. When corrosion of the steel occurs, the potential further drops and the surface roughness of the steel increases gradually. As the steel corrosion achieves a steady state, the generation of corrosion products reaches a dynamic equilibrium state. The surface roughness maintain an approximately stable value. In solutions containing increased bicarbonate concentrations, such as 0.1 M and 0.5 M NaHCO₃, the steel can be passivated. The formed passive film can eliminate some surface features and improves the surface roughness. The topographic profile of the steel surface in 0.5 M NaHCO₃ solution is smoother than that in 0.1 M solution. The surface features within 20 nm become eliminated after 4500 s of immersion in 0.1 M NaHCO₃ solution, while larger features within 50 nm in size are eliminated in 0.5 M NaHCO₃ solution in the same time period. Copyright © 2016 John Wiley & Sons, Ltd.     

Electrochemical impedance spectroscopy study of cuprous oxide films formed on copper: effect of pH and sulfate and carbonate ions

The semiconducting properties of anodic passive films formed potentiostatically on polycrystalline copper in aqueous borax solutions were studied using electrochemical impedance spectroscopy, photocurrent spectroscopy and ellipsometric measurements. The semiconducting nature of the cuprous passive layer was analysed as a function of pH (9.2>pH>7.4), electrode potential and with the addition of 3.5 mM Na₂CO₃ and 8 mM Na₂SO₄. The different growth conditions change the compactness and the defect or excess of cations accumulated in the compact inner cuprous layer, leading to different semiconducting properties. Electronic Publication     

Selection of Microalgae and Cyanobacteria Strains for Bicarbonate-Based Integrated Carbon Capture and Algae Production System

Using microalgae to capture CO₂ from flue gas is an ideal way to reduce CO₂ emission, but this is challenged by the high cost of carbon capture and transportation. To address this problem, a bicarbonate-based integrated carbon capture and algae production system (BICCAPS) has been proposed, in which bicarbonate is used for algae culture, and the regenerated carbonate from this process can be used to capture more CO₂. High-concentration bicarbonate is obligate for the BICCAPS. Thus, different strains of microalgae and cyanobacteria were tested in this study for their capability to grow in high-concentration NaHCO₃. The highest NaHCO₃ concentrations they are tolerant to were determined as 0.30 M for Synechocystis sp. PCC6803, 0.60 M for Cyanothece sp., 0.10 M for Chlorella sorokiniana, 0.60 M for Dunaliella salina, and 0.30 M for Dunaliella viridis and Dunaliella primolecta. In further study, biomass production from culture of D. primolecta in an Erlenmeyer flask with either 0.30 M NaHCO₃ or 2 % CO₂ bubbling was compared, and no significant difference was detected. This indicates BICCAPS can reach the same biomass productivity as regular CO₂ bubbling culture, and it is promising for future application.     

Characterization of the adsorption state of carbonate ions at the Au(111) electrode surface using in situ IRAS

The spectro-electrochemical behavior of carbonate and bicarbonate ions at the Au(111) electrode surface was studied using the infrared reflection absorption spectroscopy (IRAS). An absorption band caused by the adsorbed carbonate ions was observed in the wavenumber region of 1425–1511 cm⁻¹ both in Na₂CO₃ and NaHCO₃ solutions. It was concluded that the adsorbed carbonate ions co-ordinate with the electrode surface in the unidentate state with their symmetry axis normal to the substrate. This orientation is retained in the whole potential region where carbonate ions adsorb on the electrode surface in contrast to the behavior of the carbonate ions adsorbed on the Pt(111) electrode surface.     

Corrosion properties of nickel coatings obtained from aqueous and nonaqueous electrolytes

Nickel was deposited on a copper substrate from aqueous and nonaqueous ethanol electrolytes. X-ray photoelectron spectroscopy, electrochemical impedance spectroscopy and chronovoltametry, scanning electron microscopy, and atomic force microscopy were used to study the effect of the solvent on the surface and corrosion properties of the Ni coatings formed. Unifom and relatively smooth Ni films were obtained as measured with microscopy techniques. The formation of a passive film in acidic, alkaline, and neutral chloride-containing media was confirmed with X-ray photoelectron spectroscopy. The water-based nickel-plating electrolyte makes it possible to deposit coatings with higher corrosion resistance as compared with coatings deposited from ethanol electrolyte in NaOH and NaCl media. The proposed mechanism of corrosion in a 0.5 M H₂SO₄ solution involves cycles of active-passive surface behavior due to its passivation by corrosion products.     

Investigation on Electronic Property of Passive Film on Nickel in Bicarbonate/Carbonate Buffer Solution

The electronic properties of passive film formed on nickel in bicarbonate/carbonate buffer solution were studied by electrochemical impedance spectra (EIS) and Mott‐Schottky plot. The film composition was analyzed by X‐ray photoelectron spectroscopy (XPS). The results showed that passive film exhibited p‐type semi‐conductive character, and the acceptor density (N_A) decreased with increasing potential, prolonging time, decreasing temperature, increasing pH value and decreasing chloride/sulfur ions concentration. The transfer resistance and film resistance increased with the above factors changing. XPS results showed that passive film was composed of NiO and a little amount of Ni₂O₃.     

Chemical Liquid Phase Deposition of Thin Aluminum Oxide Films

Introduction Inorganic oxide films have attracted a lot of interest in the last several decades. Among them, silicon dioxide films are widely used in modern microelectronics, optics and mechanics. This material has been grown by various methods including thermal oxidation, chemical vapor phase deposition, plasma-enhanced chemical vapor phase deposition, and so on.1,2 Recently, Nagayama et al.3 have reported that SiO2 thin films could be produced by a new chemical method of liquid phase depos…     

Separation of iodine species by adsorption chromatography

Based on the different properties of iodide and iodate species in somesorption materials a new chromatographic method was developed to study thespeciation of iodine in a mangrove system. Two sorption materials, aluminaand silica, were investigated and several distribution coefficients for iodideand iodate were determined at different concentrations of NaOH, NaNO₃ and NaHCO₃ solutions. The best separation results wereobtained percolating sea water samples, containing iodine species, througha glass column filled with alumina. The iodide passed through the column afterwashing the column with 0.1M sodium nitrate solution, and the iodate was elutedwith a 0.5M sodium bicarbonate solution.     

Sodium bicarbonate,an inorganic salt and a potential active agent for cancer therapy

Cancer is a serious threat to humans due to its high mortality. The efforts to fully understand cancer and to fight against it have never been stopped. The traditional therapies, such as surgery, radiotherapy and chemotherapy, are useful but cannot meet the increasing demands of patients. As such, novel approaches against cancer are urgently required. It has been found that the acidic tumor microenvironment plays important roles in promoting the cancer progression. In recent years, sodium bicarbonate (NaHCO₃), a simple inorganic salt, has been found to be able to reverse the pH of tumor microenvironment and inhibit the invasion, metastasis, immune evasion, drug resistance and hypoxia of tumor cells. Thus, NaHCO₃-based therapy is a potential approach for the treatment of cancer, and the related studies have been increasingly reported. Herein, we aim to provide a comprehensive understanding of the acidic tumor microenvironment and summarize the applications and mechanisms of NaHCO₃ in cancer therapy. The combination of NaHCO₃ with chemotherapy, immunotherapy or nanoparticles systems is discussed. In addition, the concerns of NaHCO₃ in clinical use and the potential ways to use NaHCO₃ for cancer therapy are also discussed.     

Synthesis,Spectroscopic Characterization,and Oxidative C–C Coupling in New Copper(II) Salicylaldiminates Containing Sterically Hindered Phenol

New bis[N‐(2,6‐di‐tert‐butyl‐1‐hydroxyphenyl)salicylideneminato]copper(II) complexes bearing HO and CH₃O substituents on the salicyaldehyde moiety were prepared, and have been characterized by elemental analyses, IR, UV/Vis, ESR spectroscopy, and magnetic moments. It has been found that in the synthesis of CH₃O substituted complexes unlike HO bearing, the oxidative C–C coupling of coordinated salicylaldimine ligands take place. It has been suggested that the intermolecular H‐bonding is a dominant factor in controlling of oxidative C–C coupling conversion. The powder ESR spectra of CH₃O substituted compounds unlike of HO are typical of a triplet state Cu^II dimers with a half‐field forbidden (δM = ± 2) and the allowed (δM = ± 1) transitions at 300 and 113 K.     

Surface properties of the Ni-Cu-Cr oxide catalyst for dehydrogenative hydrolysis of amines

Catalysts for dehydrogenative hydrolysis of amines, prepared by sorption of copper ions from a solution on a preformed Ni-Cr oxide system, were studied by Auger electron spectroscopy, X-ray photoelectron spectroscopy, and IR spectroscopy of adsorbed CO and NH₃ probe molecules. It was shown that on adsorption copper blocked the chromium ions in the Ni-Cr catalyst with concomitant stabilization as Cu⁺. The incorporation of copper into the Ni-Cr system increased the ability of nickel to reduce water with the formation of oxygen-containing complexes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 288–291, February, 1993.     

过渡金属氧化物掺杂对铜锰氧化物催化CO氧化性能的影响

以乙酸铜和乙酸锰为铜锰前驱体,以NH₄HCO₃为沉淀剂,相应金属硝酸盐为掺杂剂,采用共沉淀法制备了不同过渡金属氧化物掺杂的铜锰氧化物催化剂.?采用N₂物理吸附、X射线衍射,氢气-程序升温还原和原位红外漫反射光谱等方法对催化剂进行了表征,考察了系列催化剂上CO反应性能.?结果表明,掺杂过渡金属氧化物可以调变催化剂对CO的吸附能力,进而影响催化剂性能.     

Sodium Bicarbonate Nanoparticles for Amplified Cancer Immunotherapy by Inducing Pyroptosis and Regulating Lactic Acid Metabolism

Although immunotherapy has a broad clinical application prospect, it is still hindered by low immune responses and immunosuppressive tumor microenvironment. Herein, a simple and drug-free inorganic nanomaterial, alkalescent sodium bicarbonate nanoparticles (NaHCO₃ NPs), is prepared via a fast microemulsion method for amplified cancer immunotherapy. The obtained alkalescent NaHCO₃ regulates lactic acid metabolism through acid-base neutralization so as to reverse the mildly acidic immunosuppressive tumor environment. Additionally, it can further release high amounts of Na⁺ ions inside tumor cells and induce a surge in intracellular osmolarity, and thus activate the pyroptosis pathway and immunogenic cell death (ICD), release damage-associated molecular patterns (DAMPs) and inflammatory factors, and improve immune responses. Collectively, NaHCO₃ NPs observably inhibit primary/distal tumor growth and tumor metastasis through acid neutralization remitted immunosuppression and pyroptosis induced immune activation, showing an enhanced antitumor immunity efficiency. This work provides a new paradigm for lactic acid metabolism and pyroptosis mediated tumor treatment, which has a potential for application in clinical tumor immunotherapy.     

X-ray photoelectron spectroscopic studies of the charged state of 3d metal ions in CuCr1?xVxS2 (x = 0–0.4)

The charged state of the 3d metal ions in layered cation-substituted disulfides CuCr_1−x V _x S₂ was studied by X-ray photoelectron spectroscopy. An analysis of the energy positions and structure of the Cu2p _3/2 and Cr2p _3/2 X-ray photoelectron lines showed that the corresponding polycrystalline samples of CuCr_1−x V _x S₂ contained mixed-valence chromium and copper ions. It was shown that the charged states of chromium and copper ions depended on the concentration of vanadium cations (x). The presence of mixed-valence Cu¹⁺ and Cu²⁺ ions in CuCr_1−x V _x S₂ may be correlated with the crystal structure of the corresponding layered disulfides. Original Russian Text Copyright ? 2009 by L. N. Mazalov, V. V. Sokolov, N. A. Kryuchkova, E. I. Vovk, I. Yu. Filatova, and G. M. Abramova __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 50, No. 3, pp. 461–467, May–June, 2009.     

Oximato-bridged copper(II) compounds: syntheses,molecular structures,magnetic, thermal and spectroscopic properties

Reaction of the Schiff base, 1-(4-methylimidazol-5-yl) phenylhydrazonopropane-2-one oxime (LH), with copper(II) perchlorate hexahydrate and copper(II) nitrate trihydrate in a 1 : 1 M proportion in methanol affords [Cu₂L₂(H₂O)(ClO₄)](ClO₄) (1) and [Cu₂L₂(H₂O)₂](NO₃)₂] (2) in moderate yields. Both 1 and 2 have been characterized by elemental analysis, ESI-MS, FT-IR, UV–vis absorption spectroscopy, EPR, electric conductivity, and magnetic susceptibility measurements. The X-ray crystal structures of 1·CH₃COCH₃ and 2 have been determined. Both compounds are dinuclear copper(II) complexes, with each copper μ₂-bridged by two oxime ligands in a μ₂-η¹,η² fashion. Variable temperature magnetic studies on 1 and 2 show that both compounds are dominated by an antiferromagnetic coupling through the oxime bridges.     

Copper(II) Complexes of a Hexadentate Mixed‐Donor N3S3 Macrobicyclic Cage: Facile Rearrangements and Interconversions

The potentially hexadentate mixed‐donor cage ligand 1‐methyl‐8‐amino‐3,13,16‐trithia‐6,10,19‐triazabicyclo[6.6.6]eicosane (AMME‐N₃S₃sar; sar=sarcophagine) displays variable coordination modes in a complex with copper(II). In the absence of coordinating anions, the ligand adopts a conventional hexadentate N₃S₃ binding mode in the complex [Cu(AMME‐N₃S₃sar)](ClO₄)₂ that is typical of cage ligands. This structure was determined by X‐ray crystallography and solution spectroscopy (EPR and NIR UV/Vis). However, in the presence of bromide ions in DMSO, clean conversion to a five‐coordinate bromido complex [Cu(AMME‐N₃S₃sar)Br]⁺ is observed that features a novel tetradentate (N₂S₂)‐coordinated form of the cage ligand. This copper(II) complex has also been characterized by X‐ray crystallography and solution spectroscopy. The mechanism of the reversible interconversion between the six‐ and five‐coordinated copper(II) complexes has been studied and the reaction has been resolved into two steps; the rate of the first is linearly dependent on bromide ion concentration and the second is bromide independent. Electrochemistry of both [Cu(AMME‐N₃S₃sar)]²⁺ and [Cu(AMME‐N₃S₃sar)Br]⁺ in DMSO shows that upon reduction to the monovalent state, they share a common five‐coordinated form in which the ligand is bound to copper in a tetradentate form exclusively, regardless of whether a six‐ or five‐coordinated copper(II) complex is the precursor.     

HPLC study of the inhibiting effect of phosphate and bicarbonate buffers on the leaching pattern of dental resin composites

A high-performance liquid chromatographic method was applied to evaluate the effect of bicarbonate (NaHCO₃) and phosphate (NaH₂PO₄, Na₂HPO₄) buffers on monomer leachability of dental resin composites. Evetric was the restorative resin composite that was investigated in current study. Forty disk-shaped resin composite specimens (n?=?40) were immersed by means of a silk string in the following solutions: Distilled water (A), phosphate buffer (B), bicarbonate buffer (C), artificial saliva (D). After seven (7) and fourteen (14) days, the eluates were analyzed by means of High Performance Liquid Chromatography (HPLC). Subsequently, new specimens were fabricated and immersed in fresh solutions in which methanol 12% (v/v) was added. After seven and fourteen days of storage, the leaching of monomers was examined by means of HPLC, which was proved to be an effective tool to buffers demonstrate the inhibiting effect of phosphate and bicarbonate ions on the leaching pattern of dental resin composites.     

非水体系中苯并三唑在铜电极上吸附的电化学表面增强拉曼光谱研究

采用电化学现场表面增强拉曼光谱(SERS)研究了非水体系中苯并三唑(BTAH)在铜电极上的吸附及成膜行为, 结果表明非水体系中BTAH的吸附行为随电位变化而不同. 较负电位区间主要以中性分子形式吸附; 中间电位区间主要以BTA^－吸附并不可逆成膜; 而在氧化电位区间主要表现为铜的氧化. 随中性配体三苯基膦(pph₃)的加入, 在中间电位区间, 由于易溶的Cu(pph₃)_n⁺的生成而使铜的溶解速度加快, 最终该阳离子在溶液中和BTA^-作用而生成了多核铜的配合物. 采用直接电化学方法模拟电极表面过程合成了相应的吸附产物, 并对其组成进行了相关表征.     

GDOES,XPS, and SEM with EDS analysis of porous coatings obtained on titanium after plasma electrolytic oxidation

In the paper, the glow discharge optical emission spectroscopy, X‐ray photoelectron spectroscopy, scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy results of a commercial purity titanium grade 2 after plasma electrolytic oxidation (PEO), also known as micro arc oxidation (MAO), are presented. The PEO treatment was performed in the electrolyte containing concentrated (85%) phosphoric acid with copper nitrate at the voltage of 450 ± 10 V for 1 min. For the electrolyte, copper nitrate addition from 300 to 600 g/l was used. Porous coatings of specific properties were obtained. The measurements results allow to state that the copper and nitrogen ions can be introduced into the surface layer formed on pure titanium by the plasma electrolytic oxidation. The distributions of these elements were detected to depend on the electrolyte composition, with the highest amounts revealed in the coating created in the electrolyte containing 600 g Cu(NO₃)₂ in 1 l H₃PO₄. Three sub‐layers of the coating, displayed in this work by two models, were developed in the study. The analysis performed shows that under the PEO treatment in each of the electrolytes used, the formation of coating with the top sub‐layers always enriched in copper compounds was found. Copyright © 2016 John Wiley & Sons, Ltd.     

Structural Characterization of Alumina‐Supported Rh Catalysts: Effects of Ceriation and Zirconiation by using Metal–Organic Precursors

The effects of the addition of ceria and zirconia on the structural properties of supported rhodium catalysts (1.6 and 4 wt % Rh/γ‐Al₂O₃) are studied. Ceria and zirconia are deposited by using two preparation methods. Method I involves the deposition of ceria on γ‐Al₂O₃ from Ce(acac)₃, and the rhodium metal is subsequently added, whereas method II is based on a controlled surface reaction technique, that is, the decomposition of metal–organic M(acac)_x (in which M=Ce, x=3 and M=Zr, x=4) on Rh/γ‐Al₂O₃. The structures of the prepared catalyst materials are characterized ex situ by using N₂ physisorption, transmission electron microscopy, high‐angle annular dark‐field scanning transmission election microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray photoelectron spectroscopy (XPS), and X‐ray absorption fine structure spectroscopy (XAFS). All supported rhodium systems readily oxidize in air at room temperature. By using ceriated and zirconiated precursors, a larger rhodium‐based metallic core fraction is obtained in comparison to the undoped rhodium catalysts, suggesting that ceria and zirconia protect the rhodium particles against extensive oxidation. XPS results indicate that after the calcination and reduction treatments, a small amount of chlorine is retained on the support of all rhodium catalysts. EXAFS analysis shows significant Rh? Cl interactions for Rh/Al₂O₃ and Rh/CeO_x/Al₂O₃ (method I) catalysts. After reaction with H₂/He in situ, for series of samples with 1.6 wt % Rh, the EXAFS first shell analysis affords a mean size of approximately 30 atoms. A broader spread is evident with a 4 wt % rhodium loading (ca. 30–110 atoms), with the incorporation of zirconium providing the largest particle sizes.