Naphthyl methacrylate‐based monolithic column for RP‐CEC via hydrophobic and π interactions

A neutral naphthyl methacrylate‐based monolith (NMM) was introduced for RP‐CEC of various aromatic compounds via hydrophobic and π interactions. It was characterized over a wide range of elution conditions to gain insight into its RP retention mechanism toward the various solute probes under investigation. First, the NMM column exhibited cathodal EOF at various mobile phase compositions and pH suggesting that although the NMM column is void of fixed charges, it acquires a negative zeta potential. It is believed that the negative zeta potential is imparted by the adsorption of mobile phase ions to the NMM surface. The NMM column exhibited π–π interactions in addition to hydrophobic interactions due to the aromatic and nonpolar nature of its naphthyl ligands. In all cases, the retention of the various aromatic test solutes including PAHs, benzene derivatives, toluene derivatives, anilines and toluidine, tolunitrile and nitrotoluene positional isomers on the NMM column were compared to their retention on an octadecyl acrylate‐based monolithic column. Not only were the values of the retention factors of the various solutes on the NMM column higher than those obtained on the octadecyl acrylate‐based monolithic column under otherwise the same CEC conditions, but the elution orders were also different on both columns with a superior and unique selectivity exhibited by the NMM column.     

Energetics of small molecule and water complexation in hydrophobic calixarene cavities

Calixarenes grafted on silica are energetically uniform hosts that bind aromatic guests with 1:1 stoichiometry, as shown by binding energies that depend upon the calixarene upper rim composition but not on their grafted surface density (0.02-0.23 nm(-2)). These materials are unique in maintaining a hydrophilic silica surface, as probed by H2O physisorption measurements, while possessing a high density of hydrophobic binding sites that are orthogonal to the silica surface below them. The covalently enforced cone-shaped cavities and complete accessibility of these rigidly grafted calixarenes allow the first unambiguous measurements of the thermodynamics of guest interaction with the same calixarene cavities in aqueous solution and vapor phase. Similar to adsorption into nonpolar protein cavities, adsorption into these hydrophobic cavities from aqueous solution is enthalpy-driven, which is in contrast to entropy-driven adsorption into water-soluble hydrophobic hosts such as beta cyclodextrin. The adsorption thermodynamics of several substituted aromatics from vapor and liquid are compared by (i) describing guest chemical potentials relative to pure guest, which removes differences among guests because of aqueous solvation and van der Waals contacts in the pure condensed phase, and (ii) passivating residual guest binding sites on exposed silica, titrated by water during adsorption from aqueous solution, using inorganic salts before vapor adsorption. Adsorption isotherms depend only upon the saturation vapor pressure of each guest, indicating that guest binding from aqueous or vapor media is controlled by van der Waals contacts with hydrophobic calixarene cavities acting as covalently assembled condensation nuclei, without apparent contributions from CH-pi or other directional interactions. These data also provide the first direct quantification of free energies for interactions of water with the calixarene cavity interior. The calixarene-water interface is stabilized by approximately 20 kJ/mol relative to the water-vapor interface, indicating that water significantly competes with the aromatic guests for adsorption at these ostensibly hydrophobic cavities. This result is useful for understanding models of water interactions with other concave hydrophobic surfaces, including those commonly observed within proteins.     

Resolution enhancement in hydrophobic interaction chromatography via electrostatic interactions

In this work, a new type of hydrophobic stationary phase that provide electrostatic interactions with analytes was developed by bonding β-phenylethylamine as a functional ligand to silica. This stationary phase can separate proteins with similar hydrophobicity that traditional hydrophobic resins cannot. Hen egg white was separated to examine the selectivity. The results show that the introduced electrostatic interactions are an important factor for the resolution enhancement and the new resin could have important applications in separation and purification of biological macromolecules.     

Effect of large volume injection of hydrophobic solvents on the retention of less hydrophobic pharmaceutical solutes in RP-LC

Injection of large volumes of samples in solvents other than mobile phase composition has been proved for some less hydrophobic compounds. Thus, the retention behavior of several compounds of pharmaceutical interest (isosorbide-2-nitrate, isosorbide-5-nitrate, tropicamide, pentoxifylline, and methyl p-hydroxybenzoate) was studied by using different hydrophobic solvents (n-hexane, n-heptane, or i-octane) as sample solvents. Two types of stationary phases were used: octyl and octadecyl modified silica (both of Zorbax Eclipse type). The experiments showed a linear dependence between capacity factor of each solute and sample injection volume, up to maximum volume values of about 680 microL for C8 stationary phase and 580 microL for C18 stationary phase, when the solutes are no longer retained in stationary phase. Injection of large volumes of these hydrophobic solvents is thus possible in RP-LC with a gradual reduction of retention and peak efficiency. Two major conditions are however necessary in order to apply such an injection approach: the solutes must have a proper solubility in hydrophobic solvents and meanwhile they have to be less hydrophobic than the sample solvent in order to avoid competition with solvent molecules in partitioning between mobile and stationary phases.     

Selectivity of stationary phases in reversed-phase liquid chromatography based on the dispersion interactions

Selectivity of 15 stationary phases was examined, either commercially available or synthesized in-house. The highest selectivity factors were observed for solute molecules having different polarizability on the 3-(pentabromobenzyloxy)propyl phase (PBB), followed by the 2-(1-pyrenyl)ethyl phase (PYE). Selectivity of fluoroalkane 4,4-di(trifluoromethyl)-5,5,6,6,7,7,7-heptafluoroheptyl (F13C9) phase is lowest among all phases for all compounds except for fluorinated ones. Aliphatic octyl (C8) and octadecyl (C18) phases demonstrated considerable selectivity, especially for alkyl compounds. While PBB showed much greater preference for compounds with high polarizability containing heavy atoms than C18 phase, F13C9 phase showed the exactly opposite tendency. These three stationary phases can offer widely different selectivity that can be utilized when one stationary phase fails to provide separation for certain mixtures. The retention and selectivity of solutes in reversed-phase liquid chromatography is related to the mobile phase and the stationary phase effects. The mobile phase effect, related to the hydrophobic cavity formation around non-polar solutes, is assumed to have a dominant effect on retention upon aliphatic stationary phases such as C8, C18. In a common mobile phase significant stationary phase effect can be attributed to dispersion interaction. Highly dispersive stationary phases such as PBB and PYE retain solutes to a significant extent by (attractive) dispersion interaction with the stationary phase ligands, especially for highly dispersive solutes containing aromatic functionality and/or heavy atoms. The contribution of dispersion interaction is shown to be much less on C18 or C8 phases and was even disadvantageous on F13C9 phase. Structural properties of stationary phases are analyzed and confirmed by means of quantitative structure-chromatographic retention (QSRR) study.     

Characterization of the properties of stationary phases for liquid chromatography in aqueous mobile phases using aromatic sulphonic acids as the test compounds

We investigated the effects of the concentration of naphthalene sulphonic acids (NSAs) as anionic test compounds in the injected sample and of the salt additives to the mobile phase on ion-exclusion. The retention behaviour of NSAs sensitively reflects even minor changes in the ionic and hydrophobic interactions and can be useful for predicting the effects of the stationary phases in reversed-phase chromatography of polar and ionic compounds, both small ones and biopolymers, e.g., oligonucleotides. We studied chromatographic properties of several stationary phases intended for separations in aqueous mobile phases: a C18 column end-capped with polar hydrophilic groups, a densely bonded C8 column doubly end-capped with short alkyl groups, a short alkyl stationary phase designed to keep full pore accessibility in highly-aqueous mobile phases and a Bidentate column with “bridged” C18 groups attached to the silica hydride support. The chemistry and pore structure of various types of column packing materials and of the salt additives to the mobile phase affect the proportion of the pore volume non-accessible to anions due to ion-exclusion and consequently the peak asymmetry and hydrophobic selectivity in reversed-phase chromatography of organic acids. We also addressed the problems connected with the determination of column hold-up volume in aqueous mobile phases. The accessibility of the stationary phase for anionic compounds in contact with the sample zone is affected by ion-exclusion due to repulsive interactions with the negatively charged surface in the pores of the stationary phase. The accessible part of the stationary phase increases and consequently the migration velocity along the column decreases with increasing concentration of the sample in the zone moving along the column. Because of a limited access to the stationary phase, its capacity can be easily overloaded. The combination of the column overload and ion-exclusion effects may result in fronting or tailing peak asymmetry. To explain this behaviour, we proposed a modified Langmuir model, respecting the variation of the column capacity due to the effects of sample concentration on ion-exclusion.     

高效液相色谱槲皮素键合硅胶固定相分离极性化合物

槲皮素是一种植物体中含量丰富、价格较便宜的黄酮类化合物,本研究以γ-[(2,3)-环氧丙氧]丙基三甲氧基硅烷(KH-560)为偶联剂,将其化学键合到硅胶上,得到一种含天然配体的槲皮素键合硅胶固定相(QUSP)。 采用红外光谱、热重分析、元素分析及固体核磁对其结构进行表征,测得硅胶表面槲皮素的键合量为0.139 mmol/g。 采用不同结构的溶质作探针,在评价固定相反相液相色谱疏水作用性能的基础上,侧重研究新固定相对极性芳香族化合物的分离能力,探讨了新固定相的色谱分离机理。 研究表明,仅采用甲醇或乙腈-水简单流动相,无需用缓冲液精确控制pH值,QUSP就能分别实现吡啶类、芳胺类、苯酚类、苯甲酸类和黄酮类等极性化合物的快速基线分离。 QUSP键合的槲皮素除含疏水性的C6-C3-C6骨架外,黄酮环还能为溶质提供氢键、偶极、π-π、电荷转移等多种作用位点,各种协同作用有利于提高色谱分离选择性,尤其对极性的可离子化的酸性和碱性化合物。     

Dicationic imidazolium ionic liquid modified silica as a novel reversed‐phase/anion‐exchange mixed‐mode stationary phase for high‐performance liquid chromatography

A dicationic imidazolium ionic liquid modified silica stationary phase was prepared and evaluated by reversed‐phase/anion‐exchange mixed‐mode chromatography. Model compounds (polycyclic aromatic hydrocarbons and anilines) were separated well on the column by reversed‐phase chromatography; inorganic anions (bromate, bromide, nitrate, iodide, and thiocyanate), and organic anions (p‐aminobenzoic acid, p‐anilinesulfonic acid, sodium benzoate, pathalic acid, and salicylic acid) were also separated individually by anion‐exchange chromatography. Based on the multiple sites of the stationary phase, the column could separate 14 solutes containing the above series of analytes in one run. The dicationic imidazolium ionic liquid modified silica can interact with hydrophobic analytes by the hydrophobic C₆ chain; it can enhance selectivity to aromatic compounds by imidazolium groups; and it also provided anion‐exchange and electrostatic interactions with ionic solutes. Compared with a monocationic ionic liquid functionalized stationary phase, the new stationary phase represented enhanced selectivity owing to more interaction sites.     

Multi-modal applicability of a reversed-phase/weak-anion exchange material in reversed-phase,anion-exchange,ion-exclusion,hydrophilic interaction and hydrophobic interaction chromatography modes

We recently introduced a mixed-mode reversed-phase/weak anion-exchange type separation material based on silica particles which consisted of a hydrophobic alkyl strand with polar embedded groups (thioether and amide functionalities) and a terminal weak anion-exchange-type quinuclidine moiety. This stationary phase was designed to separate molecules by lipophilicity and charge differences and was mainly devised for peptide separations with hydroorganic reversed-phase type elution conditions. Herein, we demonstrate the extraordinary flexibility of this RP/WAX phase, in particular for peptide separations, by illustrating its applicability in various chromatographic modes. The column packed with this material can, depending on the solute character and employed elution conditions, exploit attractive or repulsive electrostatic interactions, and/or hydrophobic or hydrophilic interactions as retention and selectivity increments. As a consequence, the column can be operated in a reversed-phase mode (neutral compounds), anion-exchange mode (acidic compounds), ion-exclusion chromatography mode (cationic solutes), hydrophilic interaction chromatography mode (polar compounds), and hydrophobic interaction chromatography mode (e.g., hydrophobic peptides). Mixed-modes of these chromatographic retention principles may be materialized as well. This allows an exceptionally flexible adjustment of retention and selectivity by tuning experimental conditions. The distinct separation mechanisms will be outlined by selected examples of peptide separations in the different modes.     

Retention characteristics of octadecylsilyl silica,trimethylsilyl silica and phenyldimethylsilyl silica in reversed-phase liquid chromatography

Summary The hydrophobic retention characteristics of stationary ligands for reversed-phase high-performance liquid chromatography have been evaluated from the slope (r-value) of the plots relating the capacity factors (log k) of selected aliphatic and aromatic compounds with the reciprocal of methanol concentration (log (1/[MeOH])) in aqueous mobile phase. Octadecylsilyl (ODS), trimethylsilyl (TMS) and phenyldimethylsilyl (phenyl) groups were selected as the stationary ligands bonded to silica support.On ODS or TMS silicas, unlike on phenyl silica, aliphatic compounds gave slightly larger r-values than aromatic compounds, indicating that the shape of the ligand recognizes the hydrophobic surfaces of aliphatic and aromatic solute molecules. On TMS and phenyl silicas, the degree of solute hydrophobicity contributing to its retention is about 90% and 85% of that on ODS silica, respectively. On the other hand, on TMS and phenyl silicas, the polar functional group on the solute molecule brought about a smaller decrease in retention than on ODS silica.     

Cyanobiphenyl-Mesogened Liquid Crystalline Polymer Bonded on Silica as the Stationary Phase with Shape and Polarity Recognition for LC

Cyanobiphenyl-mesogened liquid crystalline polymer is bonded on silica by surface-initiated atom transfer radical polymerization and is used as the stationary phase for liquid chromatography. Various instrumental analyses such as elemental analysis, X-ray photoelectron spectroscopy and differential scanning calorimetry were used for its characterization. The stationary phase exhibits multiple characteristics of low hydrophobicity, low hydrophobic selectivity, polarity recognition and shape selectivity in the separation of polyaromatic hydrocarbons and polar neural aromatic compounds. Temperature and mobile phase composition were confirmed to have effects on the chromatographic behavior. Isomers of polyaromatic hydrocarbons and carotenes are well separated on the stationary phase.     

Effects of electrostatic and hydrophobic interactions on the chromatographic behavior of biopolymers in HPLC columns

The effect of electrostatic and hydrophobic interactions on the chromatographic behavior of biopolymers with the use of chemically bonded silica-based HPLC columns and aqueous buffered mobile phases containing neutral salts in a wide range of concentration is discussed. Two columns packed with stationary phases appositely designed for biopolymer HPLC in size exclusion and anion exchange mode, respectively, are examined. Experimental data are evaluated by plotting the measured isocratic elution volumes of several standard proteins of different isoelectric point against the salt concentration in the mobile phase. Depending on the concentration and nature of salt, both columns exhibit different domains where either sieving effect or electrostatic or hydrophobic interactions are predominant. At sufficiently low salt concentrations electrostatic interactions are predominant leading to either increasing or decreasing elution volumes depending on the sign of the charges on the stationary phase and the protein, respectively. On the other hand, at high salt concentrations of a salt with sufficiently high molal surface tension increment proteins may be retained by hydrophobic interactions.     

Preparation of a new 1,3-alternate-calix[4]arene-bonded HPLC stationary phase for the separation of phenols, aromatic amines and drugs

We have synthesized the 1,3-alternate 25,27-dioctyloxy-26,28-bis-[3-aminopropyloxy]-calix[4]arene and then immobilized onto γ-chloropropylsilica gel (CPS). The high-performance liquid chromatographic behavior of some aromatic hydrocarbons, phenolic compounds, aromatic amines and drug compounds was studied on this 1,3-alternate-calix[4]arene-bonded silica gel stationary phase (CIMS). The effect of organic modifier content and pH of the mobile phase on retention and selectivity of these compounds were investigated. According to chromatographic data, it can be concluded that the selectivity of CIMS for analytes ascribes to various interactions between CIMS and the analytes, such as hydrophobic interaction, hydrogen bonding interaction, π-π interaction and inclusion interaction.     

Insights into the Retention Mechanism on a Pentafluorophenylpropylsiloxane-Bonded Silica Stationary Phase (Discovery HS F5) in RP-LC

The solvation parameter model is used to elucidate the retention mechanism of neutral compounds on the pentafluorophenylpropylsiloxane-bonded silica stationary phase (Discovery HS F5) with methanol-water and acetonitrile-water mobile phases containing from 10 to 70% (v/v) organic solvent. The dominant factors that increase retention are solute size and electron lone pair interactions while polar interactions reduce retention. A comparison of the retention mechanism with an octadecylsiloxane-bonded silica stationary phase based on the same silica substrate and with a similar bonding density (Discovery HS C18) provides additional insights into selectivity differences for the two types of stationary phase. The methanol-water solvated pentafluorophenylpropylsiloxane-bonded silica stationary phase is more cohesive and/or has weaker dispersion interactions and is more dipolar/polarizable than the octadecylsiloxane-bonded silica stationary phase. Differences in hydrogen-bonding interactions contribute little to relative retention differences. For mobile phases containing more than 30% (v/v) acetonitrile selectivity differences for the pentafluorophenylpropylsiloxane-bonded and octadecylsiloxane-bonded silica stationary phases are no more than modest with differences in hydrogen-bond acidity of greater importance than observed for methanol-water. Below 30% (v/v) acetonitrile selectivity differences are more marked owing to incomplete wetting of the octadecylsiloxane-bonded silica stationary phase at low volume fractions of acetonitrile that are not apparent for the pentafluorophenylpropylsiloxane-bonded silica stationary phase. Steric repulsion affects a wider range of compounds on the octadecylsiloxane-bonded than pentafluorophenylpropylsiloxane-bonded silica stationary phase with methanol mobile phases resulting in additional selectivity differences than predicted by the solvation parameter model. Electrostatic interactions with weak bases were unimportant for methanol-water mobile phase compositions in contrast to acetonitrile-water where ion-exchange behavior is enhanced, especially for the pentafluorophenylpropylsiloxane-bonded silica stationary phase. The above results are compatible with a phenomenological interpretation of stationary phase conformations using the haystack, surface accessibility, and hydro-linked proton conduit models.     

Preparation and chromatographic performance of calix[4]crown-5 macrocycle-bonded silica stationary phase

A new calix[4]crown-5 macrocycle-bonded silica stationary phase (CL-CIMS) was prepared and applied at the same time to develop a chromatographic procedure to separate aromatic amines, phenols and drugs in this study. The chromatographic behaviors of the prepared stationary phase for these analytes were studied and compared with those of ODS (octadecylsilane). The effect of organic modifier content and pH of the mobile phase on retention and selectivity of these compounds were investigated. Some aromatic amines, phenols or drugs on CL-CIMS were successfully separated. The results show that CL-CIMS exhibits high selectivities for the above analytes in high aqueous mobile phases and a bright prospect in routine, fast separation of aromatic amines, phenols and drug compounds. From chromatographic data, it can be concluded that hydrophobic interaction is mainly responsible for the retention behavior as well as hydrogen-bonding interaction, π-π and dipole-dipole interaction.     

Insights into the Retention Mechanism for Small Neutral Compounds on Silica-Based Phenyl Phases in Reversed-Phase Liquid Chromatography

The system constants of the solvation parameter model are used to prepare system maps for the retention of small neutral compounds on phenylhexylsiloxane- and pentafluorophenylpropylsiloxane-bonded superficially porous silica stationary phases (Kinetex Phenyl-Hexyl and Kinetex F5) for aqueous mobile phases containing 10–70% (v/v) methanol or acetonitrile. Electrostatic interactions (cation exchange) are important for the retention of weak bases for acetonitrile–water mobile phases, but virtually absent for the same compounds for methanol–water mobile phases. The selectivity of the Kinetex Phenyl-Hexyl stationary phase for small neutral compounds is similar to an octadecylsiloxane-bonded silica stationary phase with similar morphology Kinetex C-18 for both methanol–water and acetonitrile–water mobile phase compositions. The Kinetex Phenyl-Hexyl and XBridge Phenyl stationary phases with the same topology but different morphology are selectivity equivalent, confirming that solvation of the interphase region can be effective at dampening selectivity differences for modern stationary phases. Small selectivity differences observed for XTerra Phenyl (different morphology and topology) confirm previous reports that the length and type of space arm for phenylalkylsiloxane-bonded silica stationary phases can result in small changes in selectivity. The pentafluorophenylpropylsiloxane-bonded silica stationary phase (Kinetex F5) has similar separation properties to the phenylhexylsiloxane-bonded silica stationary phases, but is not selectivity equivalent. However, for method development purposes, the scope to vary separations from an octadecylsiloxane-bonded silica stationary phase (Kinetex C-18) to “phenyl phase” of the types studied here is limited for small neutral compounds. In addition, selectivity differences for the above stationary phases are enhanced by methanol–water and largely suppressed by acetonitrile–water mobile phases. For bases, larger selectivity differences are possible for the above stationary phases if electrostatic interactions are exploited, especially for acetonitrile-containing mobile phases.     

Evaluation of the influence of residual silanol groups on the total retention in reversed-phase chromatography

It was demonstrated that the characteristics of stationary phases for reversed-phase chromatography can be compared by analyzing the retention of several compounds belonging to a homologous series during elution with one and the same composition of mobile phase or the retention of a nonpolar compound during elution with several mobile phases of different compositions. The slope of the corresponding linear correlations can be used to characterize the hydrophobicity of the columns (stationary phases) under study. To analyze the polar interactions between the sorbate and the stationary phase it is advantageous to study the retention of a polar substance in several (at least in two) mobile phases of different compositions. The degree of displacement of the linear correlation relative to that for nonpolar substances can be considered a measure of the influence of residual silanol groups on the total retention characteristics.     

高效液相苯胺甲基键合硅胶固定相的保留机理研究

 制备了 3种不同键合量的苯胺甲基键合硅胶固定相 ,分别在正、反相条件下研究了它们对芳烃及其极性、酸性、碱性取代衍生物的保留和分离选择性 ,探讨了该固定相的保留机理 ,并考察温度对溶质在具有不同键合量的固定相上保留的影响。结果表明 :苯胺甲基键合硅胶固定相对溶质的保留是疏水、π π、偶极 偶极和电荷转移等多种作用的结果 ,在反相模式中 ,疏水作用对溶质的保留起主要作用。     

Development of a new C14 monolithic silica column containing embedded polar groups for pressurized capillary electrochromatography

Monolithic columns have been prepared with a novel bonded silica stationary phase, tetradecylamine bonded silica (TDAS), and used in pressurized capillary electrochromatography (pCEC). The monolithic silica column matrix was prepared by a sol-gel process and then chemically modified with the spacer (3-glycidoxypropyl)trimethoxysilane and tetradecylamine. The introduced embedded polar amine groups dominated the charge on the surface of the monolithic stationary phase and generated an EOF from cathode to anode under acidic conditions. The tetradecyl hydrophobic chains in TDAS provide chromatographic interactions. The chromatographic characteristics of the prepared monolithic column were studied. Some aromatic compounds including alkylbenzenes, aromatic hydrocarbons, phenols, and anilines were successfully separated on the TDAS monolithic column in pCEC mode. As expected, the TDAS monolithic stationary phases exhibit typical reversed-phase electrochromatographic behavior toward neutral solutes due to the introduced tetradecyl groups. Hydrophobic as well as electrophoretic migration processes within the monoliths were observed in the separation of basic anilines. Symmetrical peaks can be obtained for anilines because the embedded polar amine groups on the surface can effectively shield the adsorption of positively charged analytes onto the stationary phase.     

Immobilized metallacarborane as a new type of stationary phase for high performance liquid chromatography

A new type of high performance liquid chromatography (HPLC) stationary phase was prepared, and its chromatographic properties were evaluated. The sorbent was composed of metallacarborane covalently bound to silica. Because of the chemical structure of the immobilized metallacarborane, the synthesized stationary phase was able to interact with nonpolar analytes via hydrophobic interactions. The chromatographic behavior of several low-molecular-weight hydrocarbons on the sorbent under typical reversed-phase conditions was compared with octadecyl-, sulfo phenyl- and aminopropyl-modified silica stationary phases. Moreover, as a consequence of the synthetic protocol employed, the immobilization of the metallacarborane led to the development of a zwitterionic chemically bonded phase, which demonstrated excellent resistance to "phase collapse" in a 100% aqueous environment. Finally, preliminary experiments indicated that the new stationary phase has the potential for utilization in hydrophilic interaction chromatography (HILIC) mode for the separation of polar compounds.