Unsymmetric-1,3-disubstituted imidazolium salt for palladium-catalyzed Suzuki–Miyaura cross-coupling reactions of aryl bromides

A series of 1-(ferrocenylethyl)-3-substituted-imidazolium salts [3-substitute = 2,6-di(iso-propyl)phenyl (1a), 2,4,6-trimethylphenyl (1b), tert-butyl (1c), 1-Ad (1d), cyclohexyl (1e)] have been synthesized from a racemic ferrocenylethyl acetate and the corresponding N-substituted imidazole in high yields (70–94%). A combination of Pd(OAc)₂ and 1a–d was found to form an excellent catalyst system for the Suzuki–Miyaura cross-coupling reactions of aryl bromides with phenylboronic acid in the presence of Cs₂CO₃.     

Chemistry and reactivity of dinuclear manganese oxamate complexes: Aerobic catechol oxidation catalyzed by high-valent bis(oxo)-bridged dimanganese(IV) complexes with a homologous series of binucleating 4,5-disubstituted-o-phenylenedioxamate ligands

The high-valent bis(oxo)-bridged dimanganese(IV) complexes with the series of binucleating 4,5-X₂-o-phenylenebis(oxamate) ligands (opbaX₂; X = H, Cl, Me) (1a–c) have been synthesized and characterized structurally, spectroscopically and magnetically. Complexes 1a–c possess unique Mn₂(μ-O)₂ core structures with two o-phenylenediamidate type additional bridges which lead to exceptionally short Mn–Mn distances (2.63–2.65 Å) and fairly bent Mn–O–Mn angles (94.1°–94.6°). The cyclovoltammograms of 1a–c in acetonitrile (25 °C, 0.1 M Bu₄NPF₆) show an irreversible one-electron oxidation peak at moderately high anodic potentials (E_ap = 0.50–0.85 V versus SCE), while no reductions are observed in the potential range studied (down to −2.0 V versus SCE). These dinuclear manganese oxamate complexes are excellent catalysts for the aerobic oxidation of 3,5-di-tert-butylcatechol to the corresponding o-quinone in acetonitrile at 25 °C. The order of increasing catecholase activity (k_obs) with the electron donor character of the ligand substituents as 1b (X = Cl) < 1a (X = H) < 1c (X = Me) correlates with Hammett σ⁺ values (ρ = −0.95). A mechanism involving initial activation of the catechol substrate by coordination to the dimetal center and subsequent oxidation to quinone by O₂ is proposed, which is consistent with the observed saturation kinetics.     

Spatial structure of β-substituted alkoxyvinyl trifluoromethyl ketones

Spatial structure of six β-substituted enones, with common structure R₁O–CR₂CH–COCF₃, were R₁ = C₂H₅, R₂ = H (ETBO); R₁ = R₂ = CH₃ (TMPO); R₁ = C₂H₅, R₂ = C₆H₅ (ETPO); R₁ = C₂H₅, R₂ = 4- O₂NC₆H₄ (ETNO); R₁ = C₂H₅, R₂ = C(CH₃)₃ (ETDO) were investigated by ¹H and ¹⁹F NMR, infrared spectroscopy and AM1 calculations. NMR spectra revealed that enones (MBO), (ETBO) and (TMPO) are exclusively (3E) isomers, whereas in (ETPO), (ETNO) and especially in (ETDO) the percentage of (3Z) isomers is significant and depends on the nature of solvents. Conformational behaviour of studied enones are determined by the rotation around of CC double bond, C–C and C–O single bonds (correspondingly trifluoroacetyl and alkoxy groups), and (EZZ) conformer being the most stable in all cases. IR spectra revealed that with the exception of (ETDO) (EZZ) conformer is most populated in all cases. Bulky substituents like phenyl or tert-butyl group at β-position of enone result in the equilibrium mainly between (EZZ) and (ZZZ) forms, whereas β-hydrogen and β-methyl substituents determine the equilibrium between (EZZ) and (EEZ) or (EZE) conformers.     

Solid-state static Cu and P CP/MAS NMR, and liquid-state EXAFS studies on copper(I) O,O′-dialkyldithiophosphate cluster compounds: Formation of the copper(I) O,O′-di-iso-amyldithiophosphate cluster compound on the surface of synthetic chalcocite

Polycrystalline octa-nuclear copper(I) O,O′-di-i-propyl- and O,O′-di-i-amyldithiophosphate cluster compounds, {Cu₈[S₂P(OR)₂]₆(μ₈-S)} where R = ⁱPr and ⁱAm, were synthesized and characterized by ³¹P CP/MAS NMR at 8.46 T and static ⁶⁵Cu NMR at multiple magnetic field strengths (7.05, 9.4 and 14.1 T). The symmetries of the electronic environments around the P sites were estimated from the ³¹P chemical shift anisotropy (CSA) parameters, δ_aniso and η. Analyses of the ⁶⁵Cu chemical shift and quadrupolar splitting parameters for these compounds are presented with the data being compared to those for the analogous octa-nuclear cluster compounds with R = ⁿBu and ⁱBu. The ⁶⁵Cu transverse relaxation for the copper sites in {Cu₈[S₂P(OⁱPr)₂]₆(μ₈-S)} and {Cu₈[S₂P(OⁱAm)₂]₆(μ₈-S)} was found to be very different, with a relaxation time, T₂, of 590 μs (Gaussian) and 90 μs (exponential), respectively. The structures of {Cu₄[S₂P(OⁱPr)₂]₄} and {Cu₈[S₂P(OⁱPr)₂]₆(μ₈-S)} cluster compounds in the liquid- and the solid-state were studied by Cu K-edge EXAFS. The disulfide, [S₂P(OⁱAm)₂]₂, was obtained and characterized by ³¹P{¹H} NMR. The interactions of the disulfide and of the potassium O,O′-di-i-amyldithiophosphate salt with the surfaces of synthetic chalcocite (Cu₂S) were probed using solid-state ³¹P NMR spectroscopy and only the presence of copper(I) dithiophosphate species with the {Cu₈[S₂P(OⁱAm)₂]₆(μ₈-S)} structure was observed.     

Synthesis and properties of halogen- or methyl-containing poly(diphenylacetylene) membranes

Novel diphenylacetylenes with both trimethylsilyl groups and other substituents (R₂C₆H₃CCC₆H₄-p-SiMe₃, R = m,p-Cl,Cl, m,m-Cl,Cl, m,p-Br,Br, m,m-Br,Br, m,p-Me,Me, m,m-Me,Me, 1a–f, respectively) were polymerized with TaCl₅–n-Bu₄Sn to produce solvent-soluble polymers (2a–f). Most polymers (2a–e) had high molecular weight over 1 × 10⁶, and gave free-standing membranes by the solution casting method. Desilylation of these Si-containing polymer membranes was carried out with trifluoroacetic acid (TFA), which afforded solvent-insoluble desilylated polymer membranes (3a–e). According to thermogravimetric analysis (TGA), both Si-containing and desilylated polymers showed high thermal stability (T₀ ≥ 420 °C). The fractional free volume (FFV) of both Si-containing and desilylated polymer membranes (2a–d, 3a–d) were fairly large (ca. 0.27–0.32), while the FFVs of membranes (2e, 3e) were rather small (0.28 and 0.24). The oxygen permeability coefficients (P_O2) of 2a was as high as 5400 barrers, which is the largest among all the poly(diphenylacetylene) derivatives. Polymers 2b–d also exhibited high oxygen permeability, and their desilylated ones 3b–d retained similar high oxygen permeability. On the other hand, the P_O2 values of 2e and 3e were 1200 and 530 barrers, respectively, which are smaller than those of the halogen-containing polymers (2a–d and 3a–d).     

Ultrafast dissociation dynamics of ketones at 195 nm

The photodissociation dynamics of the 3s Rydberg state of three ketones (CH₃CO–R, R=C₂H₅, C₃H₇, and iso-C₄H₉) and the ensuing dissociation of the nascent acetyl radical following 195 nm excitation were investigated by ultrafast photoionization spectroscopy. The 3s state the lifetimes of these ketones are similar (2.5–2.9 ps), though lifetimes of the acetyl radical range from 8.6 ps for CH₃CO–C₂H₅, 15 ps for CH₃CO–C₃H₇, to 23 ps for CH₃CO–(iso-C₄H₉), which suggests that for larger R more vibrational degrees of freedom compete for the excess energy so that less energy is partitioned into the internal energy of the acetyl radical.     

Gaseous nitryl azide N4O2: A joint theoretical and experimental study

Gaseous nitryl azide N₄O₂ is generated by the heterogeneous reaction of gaseous ClNO₂ with freshly prepared AgN₃ at −50 °C. The geometric and electronic structure of the molecule in the gas phase has been characterized by in situ photoelectron spectroscopy (PES) and quantum chemical calculations. The experimental first vertical ionization energy of N₄O₂ is 11.39 eV, corresponding to the ionization of an electron on the highest occupied molecular orbital (HOMO) {4a″(π_{nb(N4–N5–N6)})}⁻¹. An apparent vibrational spacing of 1600 ± 60 cm⁻¹ (ν_asO1N2O3) on the second band at 12.52 eV (π_{nb(O1–N2–O3)}) further confirms the preference of energetically stable chain structure in the gas phase. To complement the experimental results, the potential-energy surface of this structurally novel transient molecule is discussed. Both calculations and spectroscopic results suggest that the molecule adopts a trans-planar chain structure, and a five-membered ring decomposition pathway is more favorable.     

Synthesis and characterization of uranium(III) compounds supported by the hydrotris(3,5-dimethyl-pyrazolyl)borate ligand: Crystal structures of [U(Tp)2(X)] complexes (X = OC6H2-2,4,6-Me3, dmpz, Cl)

Reaction of [U(Tp^Me2)₂(NR₂)] (R = Ph, SiMe₃) with protic substrates such as 2,4,6-trimethylphenol (HOC₆H₂-2,4,6-Me₃), 3,5-dimethylpyrazole (Hdmpz), 2-mercaptopyridine (HSC₅H₄N) and phenylacetylene (HCCPh) afforded the corresponding [U(Tp^Me2)₂(OAr)] (Ar = C₆H₂-2,4,6-Me₃) (1), [U(Tp^Me2)₂(dmpz)] (2), [U(Tp^Me2)₂(η²-SC₅H₄N)] (3), and [U(Tp^Me2)₂(CCPh)] (4) compounds. Reaction of [U(Tp^Me2)₂(NR₂)] with Me₃SnCl or Me₃SiBr gave [U(Tp^Me2)₂Cl] (5) and [U(Tp^Me2)₂Br] (6), respectively, in high yield. The amido precursors failed to react with cyclopentadiene, but metathesis of [U(Tp^Me2)₂I] with NaCp yielded [U(κ³-Tp^Me2)(κ²-Tp^Me2)(η⁵-Cp)] (7). Thermolysis of 7 resulted in oxidation of the metal centre and redistribution of the ligands, giving [UCp₃(dmpz)] (8), pyrazabole (9) and [U(Tp^Me2)(dmpz)₃] (10). The complexes have been fully characterized by spectroscopic methods and the structures of 1, 2, and 5 were confirmed by X-ray crystallographic studies. In the solid state the complexes exhibit distorted pentagonal bipyramidal geometries.     

The synthesis, structural features and thermal behaviour of thiophene-containing dithiocarboxylate complexes of zinc(II)

The complexes [Zn₂(S₂CTR)₄] (T = 2,5-disubstituted thiophene, R = C₄H₉ (1), C₆H₁₃ (2), C₈H₁₇ (3), C₁₂H₂₅ (4) and C₁₆H₃₃ (5)) have been synthesized and their structural features investigated. Compared to the analogous dithiobenzoate complexes, the crystal structure determination of 2 revealed that the thiophene induces a “step-rod” chain pattern instead of the linear, rodlike structure found for the corresponding dithiobenzoates. Complexes 1–5 did not display mesophases under thermal conditions, but an irregular melting pattern was observed for 3 and 4.     

A comparative study on the nature and strength of O–O, S–S, and Se–Se bond

A computational study on dichalcogenide molecules (R₂X₂; X = O, S, Se; R = H, CH₃, NH₂) has been carried out employing B3LYP and MP2 levels using 6-31+G*, 6-311+G*, 6-311++G**, and PVDZ basis sets. The relative energies have been evaluated at G2MP2 also. The rotational barriers and bond dissociation energies indicate that S–S bond is stronger than Se–Se and O–O bond. NBO analysis at MP2/6-31+G* suggest the presence of partial π character between X–X bond that decreases in the order S–S > Se–Se > O–O. Fuki functions for nucleophilic and electrophilic attack fail to distinguish the reactivity of S and Se. The proton affinities of the O₂H₂, S₂H₂, Se₂H₂ decrease in the order Se > S > O.     

Constructions of a set of novel hydrogen-bonded supramolecules from reactions of cobalt(II) salt with bis(3,5-dimethylpyrazolyl)methane and different carboxylic acids

Reactions of CoX₂·6H₂O (X = Cl⁻, ClO₄⁻) with bis(3,5-dimethylpyrazolyl)methane (dmpzm) and formic acid, acetic acid, benzoic acid, salicylic acid, maleic acid, or fumaric acid under the presence of KOH solution produced a new family of Co(II)/dmpzm complexes, [Co(dmpzm)₂L]X·nH₂O (1: L = O₂CH, X = Cl, n = 2; 2: L = OAc, X = Cl, n = 3; 3: L = benzoate, X = ClO₄, n = 1/3; 4: L = salicylate, X = ClO₄, n = 1/3) and [Co₂(dmpzm)₄L](ClO₄)₂·nSolv (5: L = maleate, n = 3, Solv = H₂O; 6: L = fumarate, n = 2, Solv = MeOH). These compounds were structurally characterized by elemental analysis, IR spectroscopy, and single-crystal X-ray diffraction. Compounds 1–4 are mononuclear while 5–6 are binuclear. Each cobalt atom of 1–6 is hexacoordinate, with a distorted octahedral CoN₄O₂ coordination geometry incorporating two N,N′-bidentate dmpzm ligands and one O,O′-bidentate carboxylate ligand. There are rich intra- and intermolecular hydrogen bonds in the crystals of 1–6, thereby forming either 2D hydrogen-bonded networks (1 and 2) or 3D hydrogen-bonded networks (3–6). In addition, the thermal behaviors of 1–6 were also investigated.     

Preparation, properties, and reactions of metal-containing heterocycles: Part CV. Synthesis and structure of polyoxadiphosphaplatinaferrocenophanes

A series of novel heterobimetallic crown ether-like polyoxadiphosphaplatinaferrocenophanes cis-[1,1′-Fc(CH₂O(CH₂CH₂O)_nCH₂CH₂PPh₂)₂]PtCl₂ (n=1–3) (4a–c) was synthesized in good yield by cyclization of the bis(phosphine) ligands 1,1′-Fc(CH₂O(CH₂CH₂O)_nCH₂CH₂PPh₂)₂ (n=1–3) (3a–c) and (PhCN)₂PtCl₂ under high dilution conditions in CH₂Cl₂. The bisphosphines 3a–c are obtained by reaction of the corresponding diols 1,1′-Fc(CH₂O(CH₂CH₂O)_nCH₂CH₂OH)₂ (n=1–3) (1a–c) with: (i) CH₃SO₂Cl in CH₂Cl₂ and (ii) LiPPh₂ in THF. Although the X-ray crystal structure of 4a shows that the cavity is large enough for the encapsulation of small metal cations, inclusion experiments of 4a–c with Group 1 cations, and Mg²⁺, or NH₄⁺ in solution applying NMR titration and cyclovoltammetric methods reveal no evidence for the formation of host–guest complexes for 4a,b. In the case of 4c only the addition of Na⁺ or K⁺ leads to an insignificant effect.     

Synthesis and desilylation of some bis(trimethylsilyl)alkenes and polymers bearing bis(silyl)alkenyl groups

The synthesis of various vinylbis(silanes) from some aryl and heteroaryl aldehydes and (Me₃Si)₃CLi in Et₂O is described. Friedel-Crafts reaction of 1,1-bis(trimethylsilyl)-2-(2-naphthyl)ethene with various acyl chlorides (RCOCl, R = Me, Et, i-Pr, i-Bu, n-pent) gave the corresponding α-silyl-α,β-unsaturated enones with high E steroselectivity. Moreover, poly(styrene)-co-[2,2-bis(trimethylsilyl)ethenyl(styrene)] obtained via the reaction of polymers bearing pendant enone functions and (Me₃Si)₃CLi, reacts with the same acyl chlorides in the presence of catalytic amount of AlCl₃ to give the new macromolecules bearing α-silyl-α,β-unsaturated enones and α,β-unsaturated enones.     

硫代多联吡啶铂(Ⅱ)配合物的合成、性质及在光催化制氢中的应用

合成了2个新配体4-(4-硫代乙酸)甲苯基-6-苯基-2,2'-联吡啶HC^N^N(PhCH₂SCOCH₃)(L3)和6-(4-硫代乙酸)甲苯基-2,2'-联吡啶 HC^N^N (CH₂SCOCH₃)(L5)及其发光的铂(Ⅱ)配合物ClPtC^N^N(PhCH₂SCOCH₃)(C3)和ClPtC^N^N(CH₂SCOCH₃)(C5). 通过¹H NMR谱和质谱对它们的结构进行了表征, 采用X射线单晶衍射分析确定了C3的晶体结构. 利用紫外-可见吸收光谱、 发射光谱及激发态寿命测定研究了它们的光物理性质和电化学性质, 以及配合物作为光敏剂在光催化制氢中的应用. 通过系列配合物产氢效率的比较, 揭示了它们的产氢效率和激发态寿命的关系.     

Syntheses, crystal structure and spectroscopic characterization of new platinum(II) dithiocarbimato complexes

The reaction of 4-iodobenzenesulfonamide or 4-fluorobenzenesulfonamide with CS₂ and KOH in dimethylformamide yielded the potassium N-R-sulfonyldithiocarbimates, K₂(RSO₂NCS₂) [R = 4-IC₆H₄ (1) and 4-FC₆H₄ (2)]. These salts reacted with K₂[PtCl₄] in water/methanol to yield complex anions bis(N-R-sulfonyldithiocarbimato)platinate(II), which were isolated as their tetrabutylammonium salts, (Bu₄N)₂[Pt(RSO₂NCS₂)₂] [R = 4-IC₆H₄ (3) and 4-FC₆H₄ (4)]. The structures of 2–4 were determined by X-ray crystallography. The Pt²⁺ in both complexes 3 and 4 lies at the inversion centre and the PtS₄ moiety has a distorted square-planar configuration. The compounds were also characterized by IR, ¹H NMR and ¹³C NMR spectroscopies, and elemental analyses. The molar conductance data are consistent with the fact that 3 and 4 are dianionic complexes.     

Syntheses and crystal structures of lithium derivatives of diphosphanes R2P–P(SiMe3)Li · 3L, R = Ph, Pr and Pr2N, L = THF or DME

The reactions of R₂P–P(SiMe₃)₂ (R = Ph, ⁱPr and ⁱPr₂N) with BuLi in THF or DME solution lead to ion-contacted lithium derivatives R₂P–P(SiMe₃)Li · 3THF (R = ⁱPr, ⁱPr₂N) with tetrahedrally surrounded Li atoms and to the solvent-separated ionic [Li · 3DME]⁺[Ph₂P–PSiMe₃]⁻ with an octahedrally surrounded Li atom as confirmed by X-ray crystal structure analysis. The reaction of BuLi with Ph₂P–P(SiMe₃)₂ is accompanied with a significant side-reaction leading to Ph₂P–PPh₂ and to LiP(SiMe₃)₂.     

Group 4 metallacarboranes of constrained geometries derived from B(cage)- and C(cage)-silylamido-substituted carborane ligands: a synthetic and structural investigation

The reactions of RNHSi(Me)₂Cl (1, R=t-Bu; 2, R=2,6-(Me₂CH)₂C₆H₃) with the carborane ligands, nido-1-Na(C₄H₈O)-2,3-(SiMe₃)₂-2,3-C₂B₄H₅ (3) and Li[closo-1-R′-1,2-C₂B₁₀H₁₀] (4), produced two kinds of neutral ligand precursors, nido-5-[Si(Me)₂N(H)R]-2,3-(SiMe₃)₂-2,3-C₂B₄H₅, (5, R=t-Bu) and closo-1-R′-2-[Si(Me)₂N(H)R]-1,2-C₂B₁₀H₁₀ (6, R=t-Bu, R′=Ph; 7, R=2,6-(Me₂CH)₂C₆H₃, R′=H), in 85, 92, and 95% yields, respectively. Treatment of closo-2-[Si(Me)₂NH(2,6-(Me₂CH)₂C₆H₃)]-1,2-C₂B₁₀H₁₁ (7) with three equivalents of freshly cut sodium metal in the presence of naphthalene produced the corresponding cage-opened sodium salt of the “carbons apart” carborane trianion, [nido-3-{Si(Me)₂N(2,6-(Me₂CH)₂C₆H₃)}-1,3-C₂B₁₀H₁₁]³⁻ (8) in almost quantitative yield. The reaction of the trianion, 8, with anhydrous MCl₄ (M=Ti and Zr) in 1:1 molar ratio in dry tetrahydrofuran (THF) at −78 °C, resulted in the formation of the corresponding half-sandwich neutral d⁰-metallacarborane, closo-1-M[(Cl)(THF)_n]-2-[1′-η¹σ-N(2,6-(Me₂CH)₂C₆H₃)(Me)₂Si]-2,4-η⁶-C₂B₁₀H₁₁ (M=Ti (9), n=0; M=Zr (10), n=1) in 47 and 36% yields, respectively. All compounds were characterized by elemental analysis, ¹H-, ¹¹B-, and ¹³C-NMR spectra and IR spectra. The carborane ligand, 7, was also characterized by single crystal X-ray diffraction. Compound 7 crystallizes in the monoclinic space group P2₁/c with a=8.2357(19) Å, b=28.686(7) Å, c=9.921(2) Å; β=93.482(4)°; V=2339.5(9) ų, and Z=4. The final refinements of 7 converged at R=0.0736; wR=0.1494; GOF=1.372 for observed reflections.     

A study on copper(II)-Schiff base-azide coordination complexes: Synthesis, X-ray structure and luminescence properties of [Cu(L)(N3)]X (L = Schiff bases; X = ClO4, PF6)

Two Schiff bases N,N′-(bis(pyridin-2-yl)benzylidene)propane-1,3-diamine (pbpd) and N,N′-(bis(pyridin-2-yl)formylidene)butane-1,4-diamine (pfbd) have been prepared and used to synthesize copper(II) complexes. Four complexes of the type [Cu(L)(N₃)]X (1–4) [L = pbpd; X = ClO₄ (1); L = pbpd; X = PF₆ (2); L = pfbd; X = ClO₄ (3); L = pfbd; X = PF₆ (4)] have been synthesized and characterized on the basis of microanalytical, spectroscopic, magnetic, electrochemical, luminescence and other physicochemical properties. Two representative complexes of the series, 2 and 3, have been characterized by single crystal X-ray diffraction measurements which reveal that in each complex the copper(II) ion assumes a distorted trigonal bipyramidal environment through coordination of the metal centre by two pyridine N atoms and two imine N atoms of the Schiff base with the fifth position occupied by a N atom of a terminal . They display intraligand ¹(π–π^*) fluorescence at room temperature and intraligand ³(π–π^*) phosphorescence in glassy solutions (MeOH at 77 K). A band (492 nm) observed for the complexes in their solid-state emission spectra is an excimeric emission arising due to an aromatic π–π interaction. Electrochemical electron transfer study reveals Cu^II–Cu^I reduction in methanolic solutions.     

Homo-metathesis of vinylsilanes catalysed by ruthenium carbene complexes

Effective homo-metathesis of a series of dichloro-substituted vinylsilanes H₂C = C(H)SiCl₂R (where R = Me, OSiMe₃, C₆H₅, C₆H₄–Me-4, C₆H₄–CF₃-4) in the presence of second generation Grubbs catalyst [Cl₂(PCy₃)(IMesH₂)Ru(=CHPh)] (I) and Hoveyda–Grubbs catalyst (II) leads to selective formation of E-1,2-bis(silyl)ethenes and ethene. On the basis of the results of experiments with deuterium-labelled reagents, a metallacarbene mechanism has been suggested for these reactions.     

Structural, vibrational and DSC investigations of the tetraethylammonium hydrogenselenate crystal

The X-ray structure of tetraethylammonium hydrogenselenate, [N(C₂H₅)₄]HSeO₄, was determined at room temperature. The crystal belongs to the P space group of triclinic system, Z=2, a=8.290(2), b=9.073(2), c=9.517(2) Å, =76.75(3), β=74.31(3) and γ=63.92(3)°. The hydrogenselenate anions are joined into cyclic dimers by two identical (equivalent by C_i) strong hydrogen bonds O(2)–H(02)O(1^a); the O(2)O(1^a) distance equals 2.611(5) Å. Powder IR and Raman spectra are discussed with respect to the crystal structure. The DSC reveals two phase transitions at 328 and 358 K.