Preparation of thermoresponsive core–shell polymeric microspheres and hollow PNIPAM microgels

A reliable and efficient route for preparing thermoresponsive hollow microgels based on cross-linked poly(N-isopropyl acrylamide) (PNIPAM) was developed. Firstly, monodisperse thermoresponsive core–shell microspheres composed of a P(styrene (St)-co-NIPAM) core and a cross-linked PNIPAM shell were prepared by seeded emulsion polymerization using P(St-co-NIPAM) particles as seeds. The size of the P(St-co-NIPAM) core can be conveniently tuned by different dosages of sodium dodecyl sulfate. The thickness of the cross-linked PNIPAM shell can be controlled by varying the dosage of NIPAM in the preparation of PNIAPM shell. Then, hollow PNIPAM microgels were obtained by simply dissolving the P(St-co-NIPAM) core with tetrahydrofuran. The core–shell microspheres and the hollow microgels were characterized by transmission electron microscopy, dynamic light scattering, atomic force microscopy, and Fourier-transform infrared spectroscopy.     

Fabrication of PtRu/Ru core–shell nanowires by exchanging Ru phases

In this study, we successfully fabricated PtRu/Ru core–shell nanowires (NWs) prepared from as-spun Ru/Pt core–shell NWs via a co-electrospinning method. Their formation mechanism together with the structural characteristics, morphology, and composition of the resulting PtRu/Ru core–shell NWs was elucidated by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM) with energy dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD). PtRu/Ru core–shell NWs fabricated from as-spun Ru/Pt core–shell NWs were formed as a result of interdiffusion between Ru atoms and Pt atoms during calcination after co-electrospinning.     

Preparation of titania hollow particles with independently controlled void size and shell thickness by catalytic templating core–shell polymer particles

Organic/inorganic hybrids were prepared by catalytic hydrolysis and subsequent polycondensation of tetra-n-butyl titanate (TnBT) in shell layers grafted on core particles. The core particles were synthesized by emulsifier-free emulsion polymerization of styrene, N-n-butyl-N-2-methacryloyloxyethyl-N,N-dimethylammonium bromide (C₄DMAEMA), and 2-chloropropionyloxyethyl methacrylate using 2,2′-azobis(2-amidinopropane) dihydrochloride as an initiator. The core diameters were controlled in the range of 70–550 nm by adjusting a C₄DMAEMA feed concentration. The core–shell particles were prepared by surface-initiated activator generated electron transfer–atom transfer radical polymerization of 2-(N,N-dimethylamino)ethyl methacrylate (DMAEMA). The sizes of core–shell particles were found to increase monotonically with an increase in a DMAEMA concentration. The hybrid particles were fabricated by adding TnBT into a water/ethanol dispersion of core–shell particles. The amounts of titania deposited increased in proportion to the grafted amounts of poly[2-(N,N-dimethylamino)ethyl methacrylate] on the core particles. The X-ray diffraction measurement revealed that the hollow titania particles obtained by heat treatment of hybrids have an anatase crystallographic phase.     

Synthesis of high-quality core–shell quantum dots of CdSe–CdS by means of gradual heating in liquid paraffin

Here, we report a novel strategy to prepare fluorescent semiconductor quantum dots (QDs) of core–shell type with CdSe–CdS QDs as a model system. Our synthesis was carried out in liquid paraffin, which is a natural, nontoxic, and cheap solvent. We applied a single injection of precursor for the shell growth at low temperature and gradual heating of the reaction mixture after that. By this manner, the Ostwald ripening of the cores was reduced, homogenous nucleation of the shell material was avoided, and highly monodisperse in size core–shell QDs were prepared. Our synthesis method allows working on open air; it is relatively fast and allows fine control over the shell growth process. It leads to the formation of core–shell CdSe–CdS QDs with fluorescence quantum yield as high as 65%. We described the optical properties of core–shell QDs by the model of attenuated quantum confinement.     

Amphiphilic polymeric particles with core–shell nanostructures: emulsion-based syntheses and potential applications

The design and synthesis of amphiphilic nano- to micro-sized polymeric particles with core–shell nanostructures have attracted more and more attention because of their wide applicability in modern material science and their technological importance in the areas of colloid and interface science. Many synthetic strategies have been developed for the preparation of amphiphilic core–shell particles that consist of hydrophobic polymer cores and hydrophilic polymeric shells. In this review, we focus on emulsion-based approaches and properties of particles produced. These methods are: (1) grafting to functionalized particle that produces a corona-like particle, (2) grafting from reactive seed particle that produces a brush-like particle, (3) copolymerization of reactive macro-monomer with hydrophobic monomer that produces a corona-like particle, (4) emulsion polymerization in the presence of block or comb-like copolymer containing controlled free-radical moiety that produces a multi-layered particle, and (5) redox-initiated graft polymerization of vinyl monomer from a water-soluble polymer containing amino groups that produces a hairy-like particle. Potential applications of some of these particles in drug and gene deliveries, enzyme immobilization, colloidal nanocatalyst, chemical sensing, smart coating, and thermal laser imaging will be discussed.     

Copper,gold, and silver decorated magnetic core–polymeric shell nanostructures for destruction of pathogenic bacteria

Fe₃O₄ magnetic nanoparticles (MNPs) were prepared by co-precipitation method. The nanoparticles were silica coated using TEOS, and then modified by the polymeric layers of polypropylene glycol (PPG) and polyethylene glycol (PEG). Finally, the core-shell samples were decorated with Ag, Au, and Cu nanoparticles. The products were characterized by vibrating sample magnetometry (VSM), TGA, SEM, XRD, and FTIR methods. The antibacterial activity of the prepared samples was evaluated in inactivation of E. coli and S. aureus microorganisms, representing the Gram-negative and Gram-positive species, respectively. The effect of solid dosage, bacteria concentration and type of polymeric modifier on the antibacterial activity was investigated. TEM images of the bacteria were recorded after the treatment time and according to the observed changes in the cell wall, the mechanism of antibacterial action was discussed. The prepared nanostructures showed high antibacterial activity against both Gram-negative and Gram-positive bacteria. This was due to the leaching of metal ions which subsequently led to the lysis of bacteria. A theoretical investigation was also done by studying the interaction of loaded metals with the nucleotide components of the microorganism DNA, and the obtained results were used to explain the experimental data. Finally, based on the observed inactivation curves, we explain the antibacterial behavior of the prepared nanostructures mathematically.

     

Eu(III)-modified properties of thermosensitive core–shell microspheres

We successfully prepared PNIPAM-g-P(NIPAM-co-St) (PNNS) core–shell microsphere by an emulsifier-free emulsion polymerization method. When PNNS with a core–shell structure is interacted with Eu(III), Eu(III) mainly bonds to oxygen of the carbonyl groups of PNNS, forming the novel PNNS-Eu(III) complex. It was found that the complex showed thermosensitive and fluorescent properties at one time. Especially, the maximum emission intensity of Eu(III) in the complex at 614 nm is significantly enhanced in comparison with that of pure Eu(III), demonstrating that there exists an efficient intermolecular energy transfer from the polymer ligand to Eu(III) and then the excited Eu(III) generates the enhanced fluorescence. When the weight ratio of Eu(III) and the PNNS is 8 wt%, the enhancement of the emission fluorescence intensity at 614 nm is highest.     

Preparations and properties of a tunable void with shell thickness SiO2@SiO2 core–shell structures via activators generated by electron transfer for atom transfer radical polymerization

Core–shell structure nanoparticles are attracting considerable attention because of their applications in drug delivery, catalysis carrier, and nanomedicine. In this study, SiO₂@SiO₂ core–shell structure with tunable void and shell thickness was successfully prepared for the first time using SiO₂-poly(buty acrylate) (PBA)-poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) (SiO₂-PBA-b-PDMAEMA) as the template and tetraethoxysilane (TEOS) as the silica source. An amphiphilic copolymer PBA-b-PDMAEMA was first grafted onto the SiO₂ nanosphere surface through activators regenerated by electron transfer for atom transfer radical polymerization. TEOS was hydrolyzed along with the PDMAEMA chain through hydrogen bonding, and the core–shell structure of SiO₂@SiO₂ was obtained through calcination to remove the copolymer. The gradient hydrophilicity of the PBA-b-PDMAEMA copolymer template facilitated the hydrolysis of TEOS molecules along the PDMAEMA to PBA segments, thereby tuning the voids between the SiO₂ core and SiO₂ shell, as well as the SiO₂ shell thickness. The voids were about 10–15 nm and the shell thicknesses were about 4–11 nm when adding different amounts of DMAEMA monomer. SiO₂@SiO₂ core–shell structures with tunable void and shell thickness were employed as supports for the loading and release of doxorubicin hydrochloride (DOX) in PBS (pH 4.0). The samples demonstrated good loading capacity and controlled release rate of DOX.     

Morphology and film formation of poly(butyl methacrylate)–polypyrrole core–shell latex particles

 Core–shell latex particles made of a poly(butyl methacrylate) (PBMA) core and a thin polypyrrole (PPy) shell were synthesized by two-stage polymerization. In the first stage, PBMA latex particles were synthesized in a semicontinuous process by free-radical polymerization. PBMA latex particles were labeled either with an energy donor or with an energy acceptor, in two different syntheses. These particles were used in a second stage as seeds for the synthesis of the core–shell particles. The PPy shell was polymerized around the PBMA core latex in an oxidative chemical in situ polymerization. Proofs for the success of the core–shell synthesis were obtained using nonradiative energy transfer (NRET) and atomic force microscopy (AFM). NRET gives access to the rate of polymer chain migration between adjacent particles in a film annealed at a temperature above the glass-transition temperature T _g of the particles. Slower chain migration of the PBMA polymer chains was obtained with the PBMA–PPy core–shell particles compared to rate of the PBMA polymer chain migration found with the pure, uncoated PBMA particles. This result is due to the coating of PBMA by PPy, which hinders the migration of the PBMA polymer chains between adjacent particles in the film. This observation has been confirmed by AFM measurements showing that the flattening of the latex film surface is much slower for the core–shell particles than for the pure PBMA particles. This result can again be explained by the presence of a rigid PPy shell around the PBMA core. Thus, these two complementary methods have given evidence that real core–shell particles were synthesized and that the shell seriously hinders film formation of the particles in spite of the fact that it is very thin (thickness close to 1 nm) compared to the size (750 and 780 nm in diameter) of the PBMA core. Transparency measurements confirm the results obtained by NRET and AFM. When the films are placed at a temperature higher than the T _g of PBMA, the increase in transparency is faster for films made with the uncoated PBMA particles than for films made with the coated PBMA particles. This result indicates again that the presence of the rigid PPy layer around the PBMA core reduces considerably the speed at which the structure of the film is modified when heated above the T _g of PBMA. Received: 02 September 1999 Accepted: 21 December 1999     

Synthesis of bifunctional core–shell particles with a porous zeolite core and a responsive polymeric shell

The aim of our work is the synthesis and characterization of colloidal core–shell particles with a zeolite core and an environmentally responsive shell. We have synthesized colloidal ZSM-5 zeolite and modified the surface with 3-(trimethoxysilyl)propyl methacrylate in order to introduce double bonds at the surface. The cross-linked polymeric shell was prepared by precipitation polymerization using the functionalized zeolite particles as seeds. We employed thermoresponsive poly(N-isopropylacrylamide) and pH-responsive poly(vinylpyridine) as the polymeric shell, respectively. The temperature- and pH-depending swelling and deswelling of the core–shell particles were characterized with dynamic light scattering techniques. Transmission electron microscopy pictures show the morphology of the synthesized particles. It is proposed that these types of bifunctional core–shell particles could be of use for controlled uptake and release applications and separation of molecules.     

Fabrication of Ordered Macroporous CdS and ZnS by Colloidal Crystal Template

Ordered macroporous semiconductors CdS and ZnS with regular arrays of spherical pores have been fabricated by poly (styrene-acrylic) (PSA) colloidal crystal template. It was found that the exact three-dimensional (3D) structure of the template had been imprinted in the final material.     

Synthesis and characterization of hollow Si–SiC composite nanospheres from hollow SiO2/C nanospheres

Journal of Sol-Gel Science and Technology - Hollow SiO2 nanospheres were fabricated by a modified Stöber method. Hollow Si–SiC composite nanospheres were firstly prepared by reducing the...     

Fabrication and interfacial morphologies of methanol–melamine–formaldehyde (MMF) shell microPCMs/epoxy composites

Microcapsules containing phase change materials (microPCMs) have many potential applications because of their thermoregulation or thermosaving abilities. At the same time, it is still essential to understand the interface stability of microPCMs/polymer composites during a thermal transmission. The aim of this work was to fabricate novel microPCMs containing dodecanol by an in situ polymerization using methanol-modified melamine–formaldehyde (MMF) prepolymer as shell material and investigate the interface morphologies of microPCMs/epoxy composites treated by a simulant thermal process with a ten times repeated temperature variation. A series of microPCMs were fabricated by 1,000–3,000 r·min⁻¹ emulsion speed with the PCM contents of 40–70%. The average diameter, melting temperature, and encapsulation efficiency of microPCMs were 1–16 μm, 19.5 °C, and 97.4%, respectively. Tests results indicated that the properties of the microPCMs were greatly affected by core/shell ratios and emulsification stirring rates of preparation conditions. With the increasing of stirring rates, the average diameters of microPCMs were sharply decreased. The encapsulation efficiency (E _e) values of microPCMs increased with the increasing of stirring rates. The contents of PCM in microcapsules (C _t) and the average diameter of microPCMs both affected the interface morphologies of microPCMs/epoxy composites after the repeated thermal treatments. Microcracks and gaps occurred after a thermal treatment in the interface of microPCMs and epoxy matrix obviously. The internal stress generated by the expansion or shrinking of the microPCMs was the main factor leading to the interface morphology changes and damaged of composites.     

Synthesis and photocatalytic properties of core–shell TiO~2@ZnIn_2S_4 photocatalyst

A novel core–shell TiO2@ZnIn2S4composite has been synthesized successfully by a simple and flexible hydrothermal route using TiO2as precursors.The as-synthesized samples were characterized by X-ray diffraction,UV–vis diffuse reflectance spectra and transmission electron microscopy.The photocatalytic properties of samples were tested by degradation of aqueous methylene blue（MB）under visible light irradiation.It was found that the as-synthesized TiO2@ZnIn2S4photocatalyst was more effcient than TiO2and ZnIn2S4in the photocatalytic degradation of MB.Moreover,TEM images confrmed the TiO2@ZnIn2S4nanoparticles possessed a well-proportioned core–shell morphology.     

Fabrication of polymeric micelles with core–shell–corona structure for applications in controlled drug release

Thermo-responsive polymeric micelles of poly (ethylene glycol)-b-poly(2-hydroxyethyl methacrylate-g-lactide)-b-poly(N-isopropylacrylamide) (PEG-P(HEMA-PLA)-PNIPAM) with core–shell–corona structure were fabricated for applications in controlled drug release. The graft copolymer of PEG-P(HEMA-PLA)-PNIPAM was self-assembled into core–shell micelles with a densely PLA core and mixed PEG/PNIPAM shells at 25 °C in aqueous media. By increasing the temperature above the lower critical solution temperature of PNIPAM, these core–shell micelles could be converted into core–shell–corona micelles because of the collapse of PNIPAM block on the PLA core as the inner shell and the soluble PEG block stretching outside as the outer corona. Anticancer drug doxorubicin (DOX) was loaded in the polymeric micelles as a model drug. Compared with polymeric micelles formed by liner PEG-b-PLA-b-PNIPAM triblock copolymer, these polymeric micelles exhibited higher loading capacity, and release of DOX from the polymeric micelles with core–shell–corona structure was well-controlled.     

Synthesis and characterization of amino-functionalized single magnetic core–silica shell composites

The thermal decomposition approach, reverse micro-emulsion system and surface modification technique had been successfully used to synthesis single magnetic core Fe₃O₄@Organic Layer@SiO₂–NH₂ complex microspheres. The magnetization of the magnetic microspheres core could be easily tuned between 28 and 56 emu/g by adjusting the amount of 2-mercaptobarbituric acid. It was found that the Organic Layer to some extent had a protective effect on avoiding Fe₃O₄ being oxidized into Fe₂O₃. Each Fe₃O₄@Organic Layer microsphere could be coated uniformly by about 30 nm of silica shell. The average diameter of the Fe₃O₄@Organic Layer@SiO₂ composites was about 538 nm. The saturation magnetization of the Fe₃O₄@Organic Layer@SiO₂ complex microspheres was 12.5% less than magnetic microspheres cores. The Fe₃O₄@Organic Layer@SiO₂–NH₂ composites possessed a huge application potentiality in specificity enriching and separating biological samples.     

Study of the role of metal core on the thermal behavior of Ag@TiO2 core–shell nanoparticles

Thermal behavior of the TiO₂ shell in the core–shell Ag@TiO₂ system has been investigated by the time differential perturbed angular correlation (TDPAC), transmission electron microscope and X-ray diffraction measurements in the temperature range from 473 to 1073 K. Although the thickness of the TiO₂ shell increases on annealing, the TDPAC results show that the anatase phase persists till 1073 K. This is in contrast with the results for the pure TiO₂ nanoparticles. These observations suggest that the phase transformation from anatase to rutile is hindered in case of core–shell nanoparticles possibly because the growth of the shell thickness in case of Ag@TiO₂ nanoparticles is not effective for rutile formation due to the presence of Ag-core.     

Theoretical study of group 11 metal–silonyl complexes: M–SiO and M–(SiO)2 (M = Cu, Ag, or Au)

 The spectroscopic properties of M–SiO and M–(SiO)₂ (1–1 and 1–2 complexes with M = Cu, Ag, or Au) have been theoretically studied. It has been shown that both M–SiO and M–(SiO)₂ compounds in their ground state are bent with a metal–Si bonded structure. The calculated M(ns) spin density agrees well with the electron spin resonance experimental data. From a topological analysis, it has been shown that a rather large charge transfer occurs from the metal towards the SiO moiety, and that the M–Si bond energy correlates with the electron density located at the M–Si bond path (bond critical point). Received: 6 July 2000 / Accepted: 11 October 2000 / Published online: 19 January 2001