Novel Nucleophilic Substitution Reactions of 5‐Halo‐4‐Sulfur‐Substituted 5,6‐Dihydro‐2‐Pyridones

The title compounds ( 3 , 8 , 9 and 10 ) were efficiently synthesized, and their substitution reactions with various nucleophiles were carried out. The effects of leaving group, sulfur‐substituent, solvent, reaction temperature, and the nature of the nucleophiles on the reactivity and S_N2/S_N2′ regioselectivity were studied and rationalized with semi‐empirical calculations.     

一种经(E)-α-碘代烯基砜的钯催化交叉偶联反应立体选择合成(1Z,3E)-2-芳砜基取代的1,3-二烯的新方法

（E）-α-Stannylvinyl phenyl（or p-tolyl）sulfones underwent an iododestannylation reaction to afford （E）-α-iodovinyl phenyl（or p-tolyl）sulfones 1, which reacted with （E）-alkenylzirconium（IV） complexes 2 produced in situ by hydrozirconation of terminal alkynes in the presence of a Pd（PPh3）4 catalyst to afford stereoselectively （1Z,3E）-2- phenyl（or p-tolyl）sulfonyl-substituted 1,3-dienes 3 in good yields.     

A Metal‐Free Synthesis of 2‐Alkyl(or Aryl) Thiomethyl‐2‐cyclohexenones from Cyclic Morita–Baylis–Hillman Bromides

Under mild conditions, an efficient and rapid S‐allylation of thiols with cyclic Morita–Baylis–Hillman (MBH) bromides without the need of a transition‐metal catalyst or an expensive additive is described herein. Treatment of the MBH bromides with various thiols or ethane‐1,2‐dithiol in the presence of Et₃N regioselectively affords the corresponding 2‐alkyl(or aryl) thiomethyl‐2‐cyclohexenones or the perhydro benzo[1,4]dithiepinone, respectively, in moderate to good yields (40 – 73%). The reaction is rapid and carried out in THF at room temperature.     

Molecular Structures of Dibromo[(E)2‐bromo‐2‐phenylvinyl]‐(phenyl) tellurium (IV) and Dibromo [(Z)‐2‐bromo‐2‐phenyl‐vinyl] (p‐tulyl) tellurium (IV) hydrate methanolate

The structures of title compounds, [TeBr₂(C₈H₆Br)(C₆H₅)] (I) and [TeBr₂(C₈H₆Br)(C₇H₉)](H₂O)(CT₃OH) (II), have been determined by X‐ray diffraction. The structures confirm that E‐ or Z‐type configuration of vinylic telluride depends on the polarity of solvent employed. In either structure, Te atom is in a trigonal dipyramide configuration with the lone pair of electrons in the equatorial position.     

Multiple Pentafluorophenylation of 2,2,3,3,5,6,6‐Heptafluoro‐3,6‐dihydro‐2H‐1,4‐oxazine with an Organosilicon Reagent: NMR and DFT Structural Analysis of Oligo(perfluoroaryl) Compounds

The reagent Me₃Si(C₆F₅) was used for the preparation of a series of perfluorinated, pentafluorophenyl‐substituted 3,6‐dihydro‐2H‐1,4‐oxazines ( 2 – 8 ), which, otherwise, would be very difficult to synthesize. Multiple pentafluorophenylation occurred not only on the heterocyclic ring of the starting compound 1 (Scheme), but also in para position of the introduced C₆F₅ substituent(s) leading to compounds with one to three nonafluorobiphenyl (C₁₂F₉) substituents. While the tris(pentafluorophenyl)‐substituted compound 3 could be isolated as the sole product by stoichiometric control of the reagent, the higher‐substituted compounds 5 – 8 could only be obtained as mixtures. The structures of the oligo(perfluoroaryl) compounds were confirmed by ¹⁹F‐ and ¹³C‐NMR, MS, and/or X‐ray crystallography. DFT simulations of the ¹⁹F‐ and ¹³C‐NMR chemical shifts were performed at the B3LYP‐GIAO/6‐31++G(d,p) level for geometries optimized by the B3LYP/6‐31G(d) level, a technique that proved to be very useful to accomplish full NMR assignment of these complex products.     

Hydrogenation of β-Keto Sulfones to β-Hydroxy Sulfones with Alkyl Aluminum Compounds: Structure of Intermediate Hydroalumination Products

β-Hydroxy sulfones are important in organic synthesis. The simplest method of β-hydroxy sulfones synthesis is the hydrogenation of β-keto sulfones. Herein, we report the reducing properties of alkyl aluminum compounds R₃Al (R = Et, i-Bu, n-Bu, t-Bu and n-Hex); i-Bu₂AlH; Et₂AlCl and EtAlCl₂ in the hydrogenation of β-keto sulfones. The compounds i-Bu₂AlH, i-Bu₃Al and Et₃Al are the at best reducing agents of β-keto sulfones to β-hydroxy sulfones. In reactions of β-keto sulfones with aluminum trialkyls, hydroalumination products with β-hydroxy sulfone ligands [R₂AlOC(C₆H₅)CH₂S(O)₂(p-R¹C₆H₄]_n [where n = 1,2; 2aa: R = i-Bu, R¹ = CH₃; 2ab: R = i-Bu, R¹ = Cl; 2ba: R = Et, R¹ = CH₃; 2bb: R = Et, R¹ = Cl] and {[Et₂AlOC(C₆H₅)CH₂S(O)₂(p-ClC₆H₄]∙Et₃Al}_n 3bb were obtained. These complexes in the solid state have a dimeric structure, while in solutions, they appear as equilibrium monomer–dimer mixtures. The hydrolysis of both the isolated 2aa, 2ab, 2ba, 2bb and 3bb and the postreaction mixtures quantitatively leads to pure racemic β-hydroxy sulfones. Hydroalumination reaction of β-keto sulfones with alkyl aluminum compounds and subsequent hydrolysis of the complexes is a simple and very efficient method of β-hydroxy sulfones synthesis.     

Synthesis and Cytotoxicity of 6‐Pyrrolidinyl‐2‐(2‐Substituted Phenyl)‐4‐Quinazolinones

In our continuing search for potential anticancer candidates, 2‐(3‐methoxyphenyl)‐6‐pyrrolidinyl‐4‐quinazolinone ( JJC‐1 ) was selected as the lead compound. Starting 5‐pyrrolidinyl‐2‐aminobenzamide was prepared using standard methodology from 5‐chloro‐2‐nitrobenzoic acid by reaction with SOCl₂, NH₃, pyrrolidine, and H₂. The starting benzamide then was reacted with 2‐substituted benzaldehyde or benzoyl chloride in N,N‐dimethylacetamide (DMAC) in the presence of NaHSO₃ at 150 °C. Thermal cyclodehydration/dehydrogenation gave the target 6‐pyrrolidinyl‐2‐(2‐substituted phenyl)‐4‐quinazolinones ( 15–22 ). These target compounds were assayed for their cytotoxicity in vitro against six cancer cell lines, including human monocytic leukemia cells (U937), mouse monocytic leukemia cells (WEHI‐3), human hepatoma cells (HepG2, Hep3B) and human lung carcinoma cells (A549, CH27). Most of them exhibited significant cytotoxic effect toward U937 and WEHI‐3 cells, with EC₅₀ values ranging from 0.30 to 10.10 μM. Compound 19 was investigated further for its action mechanisms. Preliminary findings indicated that compound 19 induced G2/M arrest and apoptosis on U937 cells.     

Synthesis of 6‐Alkylidene‐5,6‐dihydro‐4H‐1,3‐thiazine Derivatives via the Cyclization of N‐3‐Bromo‐3‐alkenylthioamides

By the treatment of N‐3‐bromo‐3‐alkenylthioamides with sodium hydroxide in DMF‐H₂O in the presence of tetra‐butylammonium bromide, series of 6‐alkylidene‐5,6‐dihydro‐4H‐1,3‐thiazine derivatives were prepared in moderate to good yields. The cyclization is supposed to proceed via both the intramolecular vinylic nucleophilic substitution and the elimination‐addition mechanisms (formation of acetylenic intermediates) in a competitive manner.     

由(E)-β-碘代烯基砜和末端炔合成多取代的1,3-烯炔

通过(E)-b-碘代烯基砜与末端炔的Sonogashira偶联反应,以中等到良好的产率合成了磺酰基取代的1,3-烯炔。在NiCl2(PPh3)2催化下,产物与格氏试剂发生脱磺酰基偶联反应,磺酰基被进一步转化为不同的取代基。     

Nucleophilic Substitution on Porphyrin Ring： Synthesis of 2-（2-Hydroxynaphthyl）-5,10,15,20-tetraphenylporphyrin

The reactions of 2-nitro-5,10,15,20-tetraphenylporphyrin （1） and its Ni （Ⅱ） （2）, Cu （Ⅱ） （3）, Zn （Ⅱ） （4） complexes with sodium 2-naphthoxide have been investigated in different solvents for preparing 2-substituted porphyrins. 2-（2-Hydroxynaphthyl）-5,10,15,20-tetraphenyl porphyrin （5） and its Ni （Ⅱ） （6）, Cu （Ⅱ） （7）, Zn （Ⅱ） （8） complexes were obtained in 72%, 78%, 81% and 65% yields in 2-naphthol at 150 ℃ respectively. The same products were also obtained in other protic solvents such as diglycol and diglycol monomethyl ether. When the reactions proceeded in aprotic solvent DMF at 150 ℃, besides 5 （70%）, 6 （34%）, 7 （54%） and 8 （50%）, the corresponding 2-（2-naphythoxy）-5, 10,15,20-tetraphenylporphyrin （9）, and its Ni （Ⅱ） （10）, Cu （Ⅱ） （11）, Zn （Ⅱ） （12） complexes were also obtained in minor, 40%, 18% and 2% yields respectively, but only 5, 6, 7, 8 were found at room temperature in DMF or DMSO. These reactions axe much faster than those of 1-4 with sodium phenoxide. The formation of C-coupling products 5-8 was proposed via SRN 1 mechanism.     

Asymmetric Decarboxylative 1,4‐Addition of Malonic Acid Half Thioesters to Vinyl Sulfones: Highly Enantioselective Synthesis of 3‐Monofluoromethyl‐3‐Arylpropanoic Esters

An asymmetric decarboxylative 1,4‐addition of malonic acid half thioesters (MAHTs) to 2‐aryl‐substituted vinyl sulfones has been developed, yielding adducts with excellent enantioselectivity (up to 97 % ee). In view of tuning pK_a values, a quinine‐based benzyl‐substituted thiourea was designed and demonstrated as the most efficient catalyst. The enantioselective synthesis of 3‐monofluorinated analogues of 3‐methyl indanone and (+)‐turmerone has been accomplished from decarboxylative 1,4‐addition adducts with satisfactory results.     

Copper‐Catalyzed N‐Arylation of 1,1,3,3‐TetramethylguanidinePhenyl Isocyanate Adduct

The synthesis of a novel class of 3‐[bis(dimethylamino)methylidene]‐1,1‐diarylureas via a Cu‐catalyzed multicomponent reaction of phenyl isocyanate (PhNCO), 1,1,3,3‐tetramethylguanidine, and aryl halides is described.     

Efficient Synthesis of a Styryl Analogue of (2S,3R,4E)‐N2‐Octadecanoyl‐4‐tetradecasphingenine via Cross‐Metathesis Reaction

The first total synthesis of sphingolipid (2S,3R,4E)‐N²‐octadecanoyl‐4‐tetradecasphingenine ( 1a ), a natural sphingolipid isolated from Bombycis Corpus 101A, and of its styryl analogue 1b was achieved in good overall yield (Schemes 1 and 2). The key step involved the installation with (E) stereoselectivity of a long lipophilic chain or phenyl group on allyl alcohol derivative 3 via a cross‐metathesis reaction (→ 5a or 5b ). The N‐Boc protected 3 was easily accessible from (S)‐Garner aldehyde.     

Three different fluoro‐ or chloro‐substituted 1′‐deoxy‐1′‐phenyl‐β‐D‐ribofuranoses

Crystal structures are reported for three fluoro‐ or chloro‐substituted 1′‐deoxy‐1′‐phenyl‐β‐D‐ribofuranoses, namely 1′‐deoxy‐1′‐(2,4,5‐trifluorophenyl)‐β‐D‐ribofuranose, C₁₁H₁₁F₃O₄, (I), 1′‐deoxy‐1′‐(2,4,6‐trifluorophenyl)‐β‐D‐ribofuranose, C₁₁H₁₁F₃O₄, (II), and 1′‐(4‐chlorophenyl)‐1′‐deoxy‐β‐D‐ribofuranose, C₁₁H₁₃ClO₄, (III). The five‐membered furanose ring of the three compounds has a conformation between a C2′‐endo,C3′‐exo twist and a C2′‐endo envelope. The ribofuranose groups of (I) and (III) are connected by intermolecular O—H...O hydrogen bonds to six symmetry‐related molecules to form double layers, while the ribofuranose group of (II) is connected by O—H...O hydrogen bonds to four symmetry‐related molecules to form single layers. The O...O contact distance of the O—H...O hydrogen bonds ranges from 2.7172 (15) to 2.8895 (19) Å. Neighbouring double layers of (I) are connected by a very weak intermolecular C—F...π contact. The layers of (II) are connected by one C—H...O and two C—H...F contacts, while the double layers of (III) are connected by a C—H...Cl contact. The conformations of the molecules are compared with those of seven related molecules. The orientation of the benzene ring is coplanar with the H—C1′ bond or bisecting the H—C1′—C2′ angle, or intermediate between these positions. The orientation of the benzene ring is independent of the substitution pattern of the ring and depends mainly on crystal‐packing effects.     

Substituent Effect on the Tautomerization of 1‐Arylazonaphthalen‐2‐ols by Mass Spectrometric Analysis

An electron‐ionization (EI) mass spectra of a series of 1‐arylazonaphthalen‐2‐ols was obtained for studying the substituent effect on the fragmentation. The correlation between the ratio, molecular ion and fragment ion, and Hammett’s constants is applied to examine the effect of the substituent on the fragmentation. The negative correction between the ratio, I_{molecular ion}/(I_171amu + I_143amu + I_115amu), and Hammett’s constants indicates an electron‐withdrawing group destabilized the molecular ion. An unusual long‐range hydrogen transfer demonstrates an important role in the fragmentation process     

The Substituent Effect of 1‐Arylazonaphthen‐2‐ols on Azo‐hydrazone Tautomerization According to NMR Analysis

The substituent effect on azo‐hydrazone tautomerization of 1‐arylazonaphthen‐ols is studied by means of NMR analysis. Among the ¹³C chemical shifts, the C(2) of this series compound is the most sensitive to the variation in the nature of substituent on the phenyl ring. Therefore, the variation in the chemical shifts of C(2) is used to probe the substituent effect by using the substituent chemical shifts and free energy vs. Hammett’s constant (χρ⁺). Both methods give a negative correlation slope, indicating the electron‐with‐ drawing groups favor the hydrazone tautomer form. The effect on the chemical shifts of C(2) of compound 8 in ten solvents can be classified as the solvent with a proton‐donor, proton‐acceptor and arenes system. The substituent with electron‐donating character is more sensitive to the nature of solvent and it favors the hydrazone form. Free energy obtained from the dynamic NMR technique indicates the tautomerization favors the hydrazone‐form for the substituent with electron‐withdrawing character.     

Embryotoxicity studies of tri‐n‐butyltin(IV) complexes of 5‐[(E)‐2‐(aryl)‐1‐diazenyl]‐2‐hydroxybenzoic acid and 2‐[(E)‐2‐(3‐formyl‐4‐hydroxyphenyl)‐1‐diazenyl] benzoic acid on sea urchin development

The toxicity studies of free 5‐[(E)‐2‐(aryl)‐1‐diazenyl]‐2‐hydroxybenzoic acid and 2‐[(E)‐2‐(3‐formyl‐4‐hydroxyphenyl)‐1‐diazenyl]benzoic acid and their tri‐n‐butyltin(IV) complexes were evaluated by using sea urchin early developmental stages as recommended model organisms for toxicity tests. The novel complexes, as the parent tri‐n‐butyltin(IV) chloride (TBTCl), caused mitosis block and induced high embryonic mortality in sea urchin. Copyright © 2005 John Wiley & Sons, Ltd.     

Copper‐Catalyzed Oxidative Reaction of β‐Keto Sulfones with Alcohols via C−S Bond Cleavage: Reaction Development and Mechanism Study

A Cu‐catalyzed cascade oxidative radical process of β‐keto sulfones with alcohols has been achieved by using oxygen as an oxidant. In this reaction, β‐keto sulfones were converted into sulfinate esters under the oxidative conditions via cleavage of C?S bond. Experimental and computational studies demonstrate that a new pathway is involved in this reaction, which proceeds through the formation of the key four‐coordinated Cu^II intermediate, O?O bond homolysis induced C?S bond cleavage and Cu‐catalyzed esterification to form the final products. This reaction provides a new strategy to sulfonate esters and enriches the research content of C?S bond cleavage and transformations.