Thermal and plasma synthesis of metal oxide nanoparticles from MOFs with SERS characterization

Aluminum oxide (Al₂O₃) and chromium oxide (Cr₂O₃) nanoparticles were synthesized by thermolysis of metal-organic frameworks (MOFs). Further O₂ plasma treatment is required to obtain high crystalline quality metal oxides. The composition and morphology of metal oxide nanoparticles were confirmed by powder X-ray diffraction and scanning electron microscopy characterization, respectively. The quality of synthesized metal oxides was also examined by observing the surface-enhanced Raman scattering (SERS) spectra of methyl orange adsorbed on Al₂O₃ and Cr₂O₃. The observed SERS effect can be ascribed to charge-transfer (CT) resonance effect between methyl orange and metal oxide surfaces. UV–vis absorption spectra and DFT calculations of metal oxide- methyl orange complexes have confirmed that the observed SRS effect is due to CT resonance between the metal oxide nanoparticles and the adsorbed methyl orange molecules.     

Milling Down to Nanometers: A General Process for the Direct Dry Synthesis of Supported Metal Catalysts

Supported catalysts are among the most important classes of catalysts. They are typically prepared by wet‐chemical methods, such as impregnation or co‐precipitation. Here we disclose that dry ball milling of macroscopic metal powder in the presence of a support oxide leads in many cases to supported catalysts with particles in the nanometer size range. Various supports, including TiO₂, Al₂O₃, Fe₂O₃, and Co₃O₄, and different metals, such as Au, Pt, Ag, Cu, and Ni, were studied, and for each of the supports and the metals, highly dispersed nanoparticles on supports could be prepared. The supported catalysts were tested in CO oxidation, where they showed activities in the same range as conventionally prepared catalysts. The method thus provides a simple and cost‐effective alternative to the conventionally used impregnation methods.     

Paramagnetic complexes of 9, 10-anthraquinone and 9-fluorenone on the metal oxide surface

Paramagnetic complexes of 9, 10-anthraquinone and 9-fluorenone adsorbed on the surface of calcium, magnesium, zinc, zirconium, and aluminum oxides and modified Al₂O₃ as well as on mixed oxides were studied by ESR and electron-nuclear double resonance. Radical anions that do not interact with Lewis acid sites are generated on the surfaces of oxides with electrondonating properties (CaO, MgO). Paramagnetic complexes of the anthraquinone or fluorenone radical anion with Lewis acid sites (coordinatively unsaturated metal cations) are formed in other cases. Several types of similar complexes can be formed. Mechanisms of interaction of the probe molecules with the metal oxide surface were proposed.     

Effects of Metal Oxide Modifications on Photoelectrochemical Properties of Mesoporous TiO2 Nanoparticles Electrodes for Dye-Sensitized Solar Cells

Mesoporous TiO₂ (m-TiO₂) nanoparticles were used to prepare the porous film electrodes for dye-sensitized solar cells, and a second metal oxide (MgO, ZnO, Al₂O₃, or NiO) modifi-cation was carried out by dipping the m-TiO₂ electrode into their respective nitrate solution followed by annealing at 500 oC. Experimental results indicated that the above second metal oxide modifications on m-TiO₂ electrode are shown in all cases to act as barrier layer for the interfacial charge transfer processes, but film electron transport and interfacial charge recombination characteristics under applied bias voltage were dependent significantly on the existing states and kinds of these second metal oxides. Those changes based on sec-ond metal oxide modifications showed good correlation with the current-voltage analyses of dye-sensitized solar cell, and all modifications were found to increase the open-circuit photo-voltage in various degrees, while the MgO, ZnO, and NiO modifications result in 23%, 13%, and 6% improvement in cell conversion efficiency, respectively. The above observations indi-cate that controlling the charge transport and recombination is very important to improve the photovoltaic performance of TiO₂-based solar cell.     

Pt/oxide nanocatalysts synthesized via the ultrasonic spray pyrolysis process: engineering metal–oxide interfaces for enhanced catalytic activity

We show that Pt nanoparticles synthesized on oxide nanocatalysts exhibit catalytic activity enhancement depending on the type of the oxide support. To synthesize the Pt/oxide nanocatalysts, we employed a versatile synthesis method using Pt nanoparticles (NPs) supported on various metal oxides (i.e., SiO₂, CeO₂, Al₂O₃, and FeAl₂O₄) utilizing ultrasonic spray pyrolysis. Catalytic CO oxidation was carried out on these catalysts, and it was found that the catalytic activity of the Pt NPs varied depending on the supporting oxide. While Pt/CeO₂ exhibited the highest metal dispersion and active surface area, Pt/FeAl₂O₄ exhibited the lowest active surface area. Among the Pt/oxide nanocatalysts, Pt NPs supported on CeO₂ showed the highest catalytic activity. We ascribe the enhancement in turnover frequency of the Pt/CeO₂ nanocatalysts to strong metal–support interactions due to charge transport between the metal catalysts and the oxide support. Such Pt/oxide nanocatalysts synthesized via spray pyrolysis offer potential possibilities for large-scale synthesis of tailored catalytic systems for technologically relevant applications.     

Fabrication of nanocomposite PAN nanofibers containing MgO and Al2O3 nanoparticles

This paper describes the effect of embedding MgO and Al₂O₃ nanoparticles on the diameter of electrospun composite polyacrylonitrile (PAN) nanofibers. Diameter of nanofibers determines the important properties of the nanofibrous mats used in a variety of developed applications such as tissue engineering scaffolds, drug delivery, catalysis, ultra filtration, sensors, and nanoelectronics. The results showed that the type and amount of nanoparticles dispersed in PAN solutions affect the conductivity as well as the viscosity of the electrospinning solutions. Increasing the amount of MgO and Al₂O₃ leads to higher conductivity and higher viscosity of the electrospinning solution and ultimately to a smaller nanofiber diameter. Moreover, the results showed that higher conductivity of the electrospinning solution overcomes the effect of higher viscosity. Finally, no interaction was detected between metal oxide nanoparticles and PAN macromolecules.     

金属氧化物吸附剂干法脱除气相As2O3实验研究

利用自制As₂O₃连续发生装置,在固定床反应器上研究了金属氧化物CaO、Fe₂O₃、Al₂O₃对煤燃烧高温烟气中气相砷的吸附特性。600~900 ℃温度的吸附实验结果表明,金属氧化物CaO、Fe₂O₃吸附剂对气相As₂O₃的吸附以化学吸附为主,随着吸附温度的升高,吸附量与吸附效率逐渐减小;3种金属氧化物的气相固砷能力依次为Fe₂O₃ >CaO >Al₂O₃;研究了气相砷浓度对吸附剂固砷量的影响特性,当气相砷体积浓度在4.5×10^-6~13.5×10^-6变化时,不会有吸附饱和的现象发生,当吸附剂种类一定时,吸附效率仅与吸附温度有关,对于不同气相砷浓度保持相同的吸附温度可以获得相同的吸附效率。     

Effect of the chemical nature of metal oxide on adhesion to the polyacrylate matrix in filled nanocomposites

The morphology, particle size, and thermochemical properties of the surface of oxides Al₂O₃, NiO, TiO₂, ZnO, and ZrO₂ obtained by the wire electroexplosion method were studied. The nanoparticles are spherical, with a mean diameter of 54–86 nm depending on the nature of the oxide. The hydrophilicity of the surface of metal oxide nanopowders was found to change in the series NiO-ZrO₂-TiO₂-ZnO-Al₂O₃. Nanocomposites with widely varied compositions were obtained from butyl methacrylate copolymer with 5 wt % methacrylic acid and the oxides under study. The enthalpies of dissolution of the composites in chloroform were determined by Calvet calorimetry. The enthalpies of copolymer mixing with oxides were calculated using the thermochemical cycle. The limiting enthalpies of copolymer adhesion to the oxide surface were calculated from the thermochemical data. The limiting adhesion enthalpy was shown to be negative for all oxides under study; these values decreased in magnitude as the surface hydrophilicity increased. The results were analyzed from the viewpoint of balance between the specific and dispersion interactions at the interface.     

Vanadium oxide monolayer catalysts. I. Preparation,characterization, and thermal stability

Vanadium oxide catalysts of the monolayer type have been prepared by means of chemisorption of vanadate(V)-anions from aqueous solutions and by chemisorption of gaseous V₂O₃(OH)₄. Using Al₂O₃, Cr₂O₃, TiO₂, CeO₂ and ZrO₂, catalysts with an approximately complete monomolecular layer of vanadium(V) oxide on the carrier oxides can be prepared, if temperature is not too high. Divalent metal oxides like CdO and ZnO may already form threedimensional surface vanadates at moderate temperature. The thermal stability of a monolayer catalyst is related to the parameter z/a, i. e. the ratio of the carrier cation charge to the sum of ionic radii of carrier cation and oxide anion. Thus, monolayer catalysts will be thermally stable only under the condition that z/a is not too high (aggregated catalyst) nor too small (ternary compound formation).     

Effect of nanoparticles on the thermal stability of PMMA nanocomposites prepared by in situ bulk polymerization

Al₂O₃ and ZnO filled poly(methyl methacrylate) nanocomposites were synthesized by free radical (bulk) polymerization. Efficient dispersion was achieved by predispersing the nanoparticles in propylene glycol methyl ether acetate (PGMEA) followed by ultrasonication of nanoparticles into the PMMA syrup. Thermal analysis confirms chemisorption between PGMEA and metal oxide particles. The addition of nanoparticle affects degradation mechanism and consequently improves thermal stability of PMMA. The reduction of polymer chain mobility and the tendency of nanoparticles to eliminate free radicals are the principal effects responsible for these enhancements.     

Surface Properties of Impregnated Mixed Oxide Catalysts

The results of a comparative study of nickel oxide-alumina and nickel oxide-silica alumina catalysts in the light of the characteristics of the support systems alumina and silica-alumina are presented. The impregnation of NiO does not produce any significant change in the textural characteristics like surface area and pore volume of the support oxides. However the deposited nickel oxide leads to the modification of the surface acidity determined by Hammett indicators. In the case of parent oxides the ammonia adsorption is strong (from heat of adsorption measurement) for alumina and silica-alumina, though for the former it is slightly stronger at comparable surface coverages. But the adsorption of ammonia on NiO? Al₂O₃ is weak while it is strong on NiO/SiO₂? Al₂O₃ at the same comparable surface coverages. The reduction in acidity is reflected in the poor dehydration and absence of skeletal isomerisation on NiO impregnated catalysts.     

One‐Nanometer‐Precision Control of Al2O3 Nanoshells through a Solution‐Based Synthesis Route

Forming uniform metal oxide nanocoatings is a well‐known challenge in the construction of core–shell type nanomaterials. Herein, by using buffer solution as a specific reaction medium, we demonstrate the possibility to grow thin nanoshells of metal oxides, typically Al₂O₃, on different kinds of core materials, forming a uniform surface‐coating layer with thicknesses achieving one nanometer precision. The application of this methodology for the surface modification of LiCoO₂ shows that a thin nanoshell of Al₂O₃ can be readily tuned on the surface for an optimized battery performance.     

Classification of Simple Oxides: A Polarizability Approach

A simple oxide classification has been proposed on the basis of correlation between electronic polarizabilities of the ions and their binding energies determined by XPS. Three groups of oxides have been considered taking into account the values obtained on refractive-index- or energy-gap-based oxide ion polarizability, cation polarizability, optical basicity, O 1s binding energy, metal (or nonmetal) binding energy, and Yamashita-Kurosawa's interaction parameter of the oxides. The group of semicovalent predominantly acidic oxides includes BeO, B₂O₃, P₂O₅, SiO₂, Al₂O₃, GeO₂, and Ga₂O₃ with low oxide ion polarizability, high O 1s binding energy, low cation polarizability, high metal (or nonmetal) outermost binding energy, comparatively low optical basicity, and strong interionic interaction, leading to the formation of strong covalent bonds. Some main group oxides so-called ionic or basic such as CaO, In₂O₃, SnO₂, and TeO₂ and most transition metal oxides show relatively high oxide ion polarizability, O 1s binding energy in a very narrow medium range, high cation polarizability, and low metal (or nonmetal) binding energy. Their optical basicity varies in a narrow range and it is close to that of CaO. The group of very ionic or very basic oxides includes CdO, SrO, and BaO as well as PbO, Sb₂O₃, and Bi₂O₃, which possess very high oxide ion polarizability, low O 1s binding energy, very high cation polarizability, and very low metal (or nonmetal) binding energy. Their optical basicity is higher than that of CaO and the interionic interaction is very weak, giving rise to the formation of very ionic chemical bonds.     

Enhanced thermal degradation of 2,2′-dichlorodiethyl sulfide (sulfur mustard,HD) with the presence of metal oxides

Thermal degradation of sulfur mustard (2,2′-dichlorodiethyl sulfide, HD) in the presence of metal oxide adsorbents was investigated by thermal desorption in conjunction with gas chromatography–mass spectrometry (GC-MS). Zr(OH)₄, Al₂O₃, Al₂CoO₄, MgO, CeO₂, and V₂O₅ were used as metal oxide adsorbents. Neat HD was spiked onto the metal oxides packed in glass tubes, which were kept at room temperature and then heated at moderately elevated temperatures of 100°C by a thermal desorption system. The products of thermal degradation were directly transferred and analyzed by GC-MS. 1,4-Dithiane and 1,4-oxathiane were characterized as the major products of the thermal degradation of HD in the presence of Zr(OH)₄, Al₂O₃, Al₂CoO₄, and CeO₂ adsorbents. No effective degradation was observed with MgO and V₂O₅. Of particular note is Zr(OH)₄, which extremely enhanced the thermal degradation of HD.     

Ultrathin Coating of Confined Pt Nanocatalysts by Atomic Layer Deposition for Enhanced Catalytic Performance in Hydrogenation Reactions

Metal‐support interfaces play a prominent role in heterogeneous catalysis. However, tailoring the metal‐support interfaces to realize full utilization remains a major challenge. In this work, we propose a graceful strategy to maximize the metal‐oxide interfaces by coating confined nanoparticles with an ultrathin oxide layer. This is achieved by sequential deposition of ultrathin Al₂O₃ coats, Pt, and a thick Al₂O₃ layer on carbon nanocoils templates by atomic layer deposition (ALD), followed by removal of the templates. Compared with the Pt catalysts confined in Al₂O₃ nanotubes without the ultrathin coats, the ultrathin coated samples have larger Pt–Al₂O₃ interfaces. The maximized interfaces significantly improve the activity and the protecting Al₂O₃ nanotubes retain the stability for hydrogenation reactions of 4‐nitrophenol. We believe that applying ALD ultrathin coats on confined catalysts is a promising way to achieve enhanced performance for other catalysts.     

An XPS study of the oxidation of noble metal particles evaporated onto the surface of an oxide support in their reaction with NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>

The interaction of the model catalysts Rh/Al₂O₃, Pd/Al₂O₃, Pt/Al₂O₃, and Pt/SiO₂ with NO _x (mixture of 10 Torr of NO and 10 Torr of O₂) was studied by X-ray photoelectron spectroscopy (XPS). Samples of the model catalysts were prepared under vacuum conditions as oxide films ≥100 Å in thickness on tantalum foil with evaporated platinum-group metal particles. According to transmission electron microscopic data, the platinum-group metal particle size was several nanometers. It was found by XPS that the oxidation of Rh and Pd nanoparticles in their interaction with NO _x occurs already at room temperature. The particles of platinum were more stable: their oxidation under the action of NO _x was observed at elevated temperatures of ～300°C. At room temperature, the interaction of platinum nanoparticles with NO _x hypothetically leads to the dissolution (insertion) of oxygen atoms in the bulk of the particles with the retention of their metallic nature. It was found that dissolved oxygen is much more readily reducible by hydrogen than the lattice oxygen of the platinum oxide particles.     

Correlating the Surface Basicity of Metal Oxides with Photocatalytic Hydroxylation of Boronic Acids to Alcohols

Photoredox catalysis provides opportunities in harnessing clean and green resources such as sunlight and O₂, while the acid and base surface sites of metal oxides are critical for industrial catalysis such as oil cracking. The contribution of metal oxide surfaces towards photocatalytic aerobic reactions was elucidated, as demonstrated through the hydroxylation of boronic acids to alcohols. The strength and proximity of the surface base sites appeared to be two key factors in driving the reaction; basic and amphoteric oxides such as MgO, TiO₂, ZnO, and Al₂O₃ enabled high alcohol yields, while acidic oxides such as SiO₂ and B₂O₃ gave only low yields. The reaction is tunable to different irradiation sources by merely selecting photosensitizers of compatible excitation wavelengths. Such surface complexation mechanisms between reactants and earth abundant materials can be effectively utilized to achieve a wider range of photoredox reactions.     

Delivery of Highly Active Noble‐Metal Nanoparticles into Microspherical Supports by an Aerosol‐Spray Method

Noble metal nanoparticles (NPs) with 1–5 nm diameter obtained from NaHB₄ reduction possess high catalytic activity. However, they are rarely used directly. This work presents a facile, versatile, and efficient aerosol‐spray approach to deliver noble‐metal NPs into metal oxide supports, while maintaining the size of the NPs and the ability to easily adjust the loading amount. In comparison with the conventional spray approach, the size of the loaded noble‐metal nanoparticles can be significantly decreased. An investigation of the 4‐nitrophenol hydrogenation reaction catalyzed by these materials suggests that the NPs/oxides catalysts have high activity and good endurance. For 1 % Au/CeO₂ and Pd/Al₂O₃ catalysts, the rate constants reach 2.03 and 1.46 min^?1, which is much higher than many other reports with the same noble‐metal loading scale. Besides, the thermal stability of catalysts can be significantly enhanced by modifying the supports. Therefore, this work contributes an efficient method as well as some guidance on how to produce highly active and stable supported noble‐metal catalysts.     

Carbon Dioxide Reforming of Methane over Ni Catalysts Supported on Al2O3 Modified with La2O3, MgO, and CaO

The preparation of synthesis gas from carbon dioxide reforming of methane (CDR) has attracted increasing attention. The present review mainly focuses on CDR to produce synthesis gas over Ni/MO_x/Al₂O₃ (X = La, Mg, Ca) catalysts. From the examination of various supported nickel catalysts, the promotional effects of La₂O₃, MgO, and CaO have been found. The addition of promoters to Al₂O₃-supported nickel catalysts enhances the catalytic activity as well as stability. The catalytic performance is strongly dependent on the loading amount of promoters. For example, the highest CH₄ and CO₂ conversion were obtained when the ratios of metal M to Al were in the range of 0.04–0.06. In the case of Ni/La₂O₃/Al₂O₃ catalyst, the highest CH₄ conversion (96%) and CO₂ conversion (97%) was achieved with the catalyst (La/Al = 0.05 (atom/atom)). For Ni/CaO/Al₂O₃ catalyst, the catalyst with Ca/Al = 0.04 (atom/atom) exhibited the highest CH₄ conversion (91%) and CO₂ conversion (92%) among the catalysts with various CaO content. Also, Ni/MgO/Al₂O₃ catalyst with Mg/Al = 0.06 (atom/atom) showed the highest CH₄ conversion (89%) and CO₂ conversion (90%) among the catalysts with various Mg/Al ratios. Thus it is most likely that the optimal ratios of M to Al for the highest activities of the catalysts are related to the highly dispersed metal species. In addition, the improved catalytic performance of Al₂O₃-supported nickel catalysts promoted with metal oxides is due to the strong interaction between Ni and metal oxide, the stabilization of metal oxide on Al₂O₃ and the basic property of metal oxide to prevent carbon formation.     

Synthesis and Characterization of Spinel‐Type Gallia‐Alumina Solid Solutions

By precipitation with ammonia of ethanolic solutions containing the appropriate proportions of gallium and aluminium nitrate, following by calcination of the resulting gels at 773 K, mixed Ga₂O₃/Al₂O₃ oxides having Ga:Al ratios of 9:1, 4:1, 1:1, 1:4 and 1:9 were obtained. Powder X‐ray diffraction showed that these mixed metal oxides form a series of solid solutions having the spinel‐type structure; also shown by γ‐Al₂O₃ and γ‐Ga₂O₃. The specific surface area (determined by nitrogen adsorption at 77 K) was found to range from 160 m² g^?1 for the mixed oxide having Ga:Al = 9:1 up to 370 m² g^?1 for that having Ga:Al = 1:9. High resolution MAS NMR showed that Ga³⁺ and Al³⁺ ions occur at both tetrahedral and octahedral sites in the spinel‐type structure of the mixed metal oxides, although there is a preferential occupation of tetrahedral sites by Ga³⁺ ions. A proportion of penta‐coordinated Al³⁺ ions was also found. IR spectra of carbon monoxide adsorbed at 77 K showed that the mixed metal oxides have a considerable Lewis acidity, related mainly to tetrahedrally coordinated metal ions exposed at crystal surfaces. The characteristic infrared absorption band of coordinated (adsorbed) CO appears in the range 2205–2190 cm^?1, and its peak wavenumber is nearly independent of Ga:Al ratio in the mixed gallia‐alumina oxides.