聚L-酪氨酸修饰电极的制备及对多巴胺的测定

用循环伏安法制备了聚L 酪氨酸修饰玻碳电极,研究了多巴胺在聚L 酪氨酸修饰电极上的电化学行为,建立了循环伏安法测定痕量多巴胺的新方法。多巴胺在pH7.0的磷酸盐缓冲溶液中,在聚L 酪氨酸修饰玻碳电极上产生一对灵敏的氧化还原峰,峰电位分别为Epa=189mV,Epc=131mV。循环伏安法测定多巴胺的线性范围为1.0×10-3～1.0×10-8mol/L,检出限:1.0×10-9mol/L。方法可用于药剂中多巴胺的测定。     

芦丁在纳米金修饰玻碳电极上的电化学行为及其测定

采用循环伏安法将纳米金电沉积于玻碳电极表面,制备了纳米金修饰玻碳电极(NG/GCE).在pH3.29的Britton-Robinson(B-R)缓冲溶液中,用循环伏安法研究了芦丁在NG/GCE上的电化学行为.结果表明,NG/GCE对芦丁的氧化还原反应有良好的电催化作用.用方波伏安法测得芦丁的还原峰电流与其浓度在2.0×10-8～2.0×10-6mol/L范围内呈线性关系,检出限为1.0×10-8mol/L(S/N=3).     

聚L-赖氨酸修饰电极循环伏安法测定药剂中的多巴胺

用循环伏安法制备了聚L-赖氨酸修饰玻碳电极,研究多巴胺在聚L-赖氨酸修饰电极上的电化学行为,建立了循环伏安法测定多巴胺的新方法。实验结果表明,在pH7.0的磷酸盐缓冲溶液中,扫描速率为150mV/s,循环扫描电位在-0.3~0.6V时,多巴胺在聚L-赖氨酸修饰玻碳电极上出现一对灵敏的氧化还原峰,峰电位分别为Epa=0.175V,Epc=0.146V(相对饱和甘汞电极);测定多巴胺的线性范围为1.0×10-3~1.0×10-5mol/L和1.0×10-5~8.0×10-9mol/L,方法检出限1.0×10-9mol/L。用于药剂中多巴胺的测定。     

多巴胺在牛磺酸修饰玻碳电极上的电化学行为及其分析应用

采用电化学聚合法制备了牛磺酸修饰玻碳电极,研究了多巴胺在聚牛磺酸修饰电极上的电化学行为,建立了测定痕量多巴胺的新方法.在pH 7.2的磷酸盐缓冲溶液中,多巴胺在修饰电极上产生一对灵敏的氧化还原峰,采用差分脉冲伏安法测定,其氧化峰电流与多巴胺浓度在8.0×10-8～1.0×10-4 mol/L范围内呈良好的线性关系,检出限为1.0×10-8 mol/L.     

盐酸异丙嗪的微波增敏方波伏安法测定

以玻碳电极作工作电极,在微波作用下用循环伏安法和方波伏安法研究了盐酸异丙嗪的电化学特性,结果表明微波可以增大峰电流,并应用于盐酸异丙嗪的检测,建立了一种新的检测盐酸异丙嗪的电化学方法.在最佳实验条件下,无微波作用时用方波伏安法检测盐酸异丙嗪,其响应电流与盐酸异丙嗪的浓度在4.0×10-6 ～1.0×10-4 mol/L范围呈线性关系(r=0.998 2,n=7),线性回归方程为I(A)=0.040 3c(mol/L)+5.0×10-7,检出限为4.0×10-7 mol/L;在微波作用下用方波伏安法检测盐酸异丙嗪,其响应电流与盐酸异丙嗪的浓度在4.0×10-6 ～1.0×10-4 mol/L范围有很好的线性关系(r=0.999 1,n=7),线性回归方程为I(A)=0.045 7c(mol/L)+6.0×10-7,检出限为2.0×10-7 mol/L.在4.0×10-6 ～1.0×10-4 mol/L范围微波增敏的峰电流与无微波条件下峰电流的比值平均值为1.22.该方法用于盐酸异丙嗪片的测定,结果满意.     

一种基于乙炔黑/壳聚糖膜修饰电极的对氨基酚传感研究

制备了一种乙炔黑/壳聚糖薄膜修饰的玻碳电极,用循环伏安法详细研究了对氨基酚在该修饰电极上的电化学行为.结果表明: 对氨基酚在此膜修饰电极上呈现出一对可逆的氧化还原峰.相对于裸玻碳电极,该氧化还原峰的峰电流明显提高,峰电位差减小,可逆性变好,表明乙炔黑/壳聚糖薄膜电极对对氨基酚的电化学氧化具有良好的催化作用.对氨基酚的氧化峰电流与其浓度在1.0×10-7～2.0×10-6 mol/L和2 0×10-6～5.0×10-4 mol/L范围内均呈良好的线性关系; 检出限为5.0×10-8 mol/L(S/N=3).应用此修饰电极测定实际水样,结果较满意.     

氟嗪酸在碳纳米管修饰电极上的电化学行为及含量的测定

在玻碳电极上制备了多壁碳纳米管/Nafion(MWNTs-Nafion)膜,用交流阻抗谱(EIS)、循环伏安法(CV)、线性扫描伏安法(LSV)研究了氟嗪酸在该膜上的电化学行为。与裸玻碳电极相比,这种纳米结构膜修饰的电极对氟嗪酸的电化学氧化显现出极好的促进作用,氟嗪酸的氧化峰电流明显增强,在修饰电极上于 0.97 V处产生了1个灵敏氧化峰。LSV测定氟嗪酸的线性范围为1.0×10-8～1.0×10-6mol/L和1.0×10-6～2.0×10-5mol/L,开路富集400 s后,检出限为8.0×10-9mol/L(3倍信噪比),方法可用于人尿中氟嗪酸的实时测定。     

聚L-白氨酸修饰电极伏安法测定痕量多巴胺的研究

用循环伏安法制备了聚L-白氨酸修饰玻碳电极,研究了多巴胺在聚L-白氨酸修饰玻碳电极上的电化学行为,建立了循环伏安法测定痕量多巴胺的新方法。实验结果表明,在pH 6.0的磷酸盐缓冲溶液中,多巴胺在聚L-白氨酸修饰玻碳电极上产生一对灵敏的氧化还原峰,峰电位分别为Epa=0.281V,Epc=0.170 V(相对Ag/AgCl电极)。峰电流与多巴胺的浓度在5.0×10-8~5.0×10-4mol/L的范围内有线性关系,检出限为5.0×10-9mol/L。对1.0×10-5mol/L多巴胺溶液平行测定9次,其相对标准偏差为4.0%。已用于针剂中多巴胺的测定。     

金纳米粒子/碳纳米管修饰电极吸附伏安法测定微量间苯二胺

运用循环伏安法及线性扫描伏安法研究了间苯二胺在金纳米粒子/碳纳米管修饰玻碳电极上的电化学行为,优化并建立了一种直接测定间苯二胺的电化学分析方法。结果表明,与裸玻碳电极相比,金纳米粒子/碳纳米管修饰电极能显著提高间苯二胺的氧化峰电流。在优化条件下,氧化峰电流与间苯二胺浓度在3.0×10-8~1.0×10-6mol/L范围内呈现良好的线性关系,检出限为1.0×10-8mol/L,对1.0×10-7mol/L的间苯二胺溶液平行测定10次的RSD为4.2%。测定了实验室废水中的间苯二胺含量,3次测定结果的平均回收率为99.7%,RSD为2.1%。     

甲醛的铂微粒修饰玻碳电极伏安法测定

采用电化学沉积法制备了铂微粒修饰玻碳电极(Pt/GCE).通过循环伏安法研究了甲醛在该电极上的电化学行为,并优化了实验参数,在此基础上建立了一种伏安法直接测定甲醛的方法.在酸性溶液中,甲醛的氧化峰电流与其浓度在1.0×10-5～1.0×10-3mol/L的范围内呈良好的线性关系(r=0.999 7),检出限为5.0 μmol/L,回收率为96%～104%,相对标准偏差为4.0%～4.5%.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.