金红石型TiO2的快速晶型转变

SnO2;金红石型TiO2的快速晶型转变     

纳米金红石型TiO2催化超声降解亚甲基蓝溶液

水溶性染料是印染工业中污染治理的主要对象,由于它们大多含有苯环,目前所使用的化学和生物等处理方法效果均不佳。而以半导体为催化剂的光催化处理方法对单一染料和实际印染废水处理效果较好。本文采用高温处理过的纳米TiO2作催化剂对亚甲基蓝溶液进行降解,大大缩短了降解时间,提高了降解率,60min降解率即可达66．8％,120min降解率则可达80％以上。而且发现利用超声波来替代紫外光对亚甲基蓝进行降解时,     

化学镀镍-高磷合金的微观结构及晶化行为研究

分别以SnCl2.2H2O和SnCl2.5H2O为锡源,采用胶溶晶核法,经沉淀和胶溶过程,在液相中一步合成了金红石型TiO2。详细考察了各种胶溶条件对产物结构的影响,并通过两种锡源实验结果的比较对异相晶核法中两种锡源的成晶机理进行了分析,所合成的金红石型TiO2晶粒度为20－50nm,两种方法获得完全红金石型TiO2所需引入SnO2的最低物质的量的分数分别为10％和8％。     

液相合成金纳米团簇

作为过渡金属团簇的一种,金纳米团簇由于具有不同于其它纳米材料的特殊物化性能,在催化、光学、电学及生物技术等领域具有潜在的应用前景。本文综述了液相合成金纳米团簇的研究进展,主要包括有机膦化物和硫醇保护的金纳米团簇的合成方法与晶体结构,这将为金纳米团簇的研究者提供一定的参考。     

Y掺杂纳米TiO2的合成及晶型转变过程

溶胶-凝胶;锐钛型;金红石型;Y掺杂纳米TiO2的合成及晶型转变过程     

均相水解法制备金红石含量可控的纳米TiO2

用均相水解法通过调节对甲苯磺酸的添加量制备了金红石含量线性可控的纳米TiO2粒子,相同条件下,没有加入对甲苯磺酸时,制备的TiO02颗粒为纯锐钛矿晶型．制备的纳米TiO2颗粒,其单晶尺寸为19．5mm(金红石),13．5mm(锐钛矿),比表面积72．7m^2／g,通过公式计算得到了制备的TiO2纳米颗粒带隙能为2．83eV,比P25和纯锐钛矿纳米TiO2颗粒的带隙能均低．     

低温水热法制备高活性纳米金红石相二氧化钛

采用低温水热法由TiC l3溶液直接制备了纳米二氧化钛,并研究了TiC l3溶液浓度、反应温度以及陈化时间对产物晶相、晶化程度、形貌以及尺寸的影响。结果表明:TiC l3溶液浓度对晶相有较大影响,高浓度下易获得混晶,低浓度下得到纯金红石相。反应温度和陈化时间主要影响产物的晶化程度和晶体的形貌、尺寸,对生成的晶相也有一些影响。在给定的反应条件下,获得了形状规整、尺寸约为15×80nm、晶化程度高的金红石相二氧化钛纳米棒。对甲基橙的光催化降解实验表明,这种金红石纳米颗粒的催化活性与市售纳米锐钛矿相二氧化钛相近。     

液相合成超薄TiO2纳米片微结构影响因素研究

二维纳米结构二氧化钛由于表面活性位点剧增可带来光催化活性的显著提高.本文通过液相法在低温条件下合成大尺寸TiO₂纳米片,重点研究溶液中硝酸浓度、熟化温度和反应物浓度对其二维结构形成过程的影响.采用透射电子显微镜（TEM）表征样品的微观形态,并结合紫外-可见吸收光谱、X射线衍射谱（XRD）、X射线光电子能谱（XPS）和傅立叶变换红外光谱分析样品的微结构性质.采用光催化还原Cr （VI）作为指示反应,评估各制备参数对二氧化钛光催化性能的影响.结果表明,硝酸浓度为0.0217~0.0721 mol·L^-1的样品在0~4℃条件下胶溶及熟化时可得到具有显著量子尺寸效应的超薄锐钛矿型TiO₂纳米片;硝酸浓度过高引起样品晶型和形态的转变,过低导致胶溶时间延长;熟化温度超过4℃会破坏二维结构的形成;提高反应物中乙醇的用量有助于分散水解产物,促进胶溶和二维结构的形成进程.     

液相一步合成金红石型超细TiO2

二氧化钛在自然界中存在三种结晶形态:金红石型、锐钛矿型和板钛矿型.金红石型TiO₂因其折射率高,性能优越,因而得到广泛的应用^[1～3].传统金红石型TiO₂的制备需经高温固相反应,经历由无定形→锐钛矿→金红石的转化过程.     

微乳液法低温制备纳米金红石型二氧化钛的研究

以TiCl₄为原料、在十六烷基三甲基溴化铵/正己醇/水组成的微乳液体系中、在较低温度下,制备了球形、花状、捆绑丝和星形的金红石型二氧化钛纳米颗粒。研究了w值(水与CTAB物质的量之比)、反应物浓度、反应温度以及P值(正己醇与CTAB的物质的量之比)等因素对产品形貌的影响,并用TEM、XRD对产品进行了表征。     

Synthesis of Gray Ceramic Pigments with Rutile Structure from Alkoxides

In this study, V _x Ti_{1 – x} O₂ (0 x 0.20) rutile solid solutions have been synthesized from gels built from hydrolysis-condensation of V(IV) oxyacetilacetonate and Ti(IV) isopropoxide mixture (polymeric gel). These solid solutions are stable at high temperature (1200–1400°C) and into glazes. The colouration of the glazes together with the thermal stability of these rutile solid solutions indicates their potential usefulness as gray ceramic pigments. The results obtained are compared with those obtained from V₂O₅ and TiO₂ (anatase) mixtures (ceramic method). From alkoxides, noticeable change in coloration is obtained on glazes, when x < 0.10.     

新型偶氮苯类树状液晶的合成及表征

采用酯化反应合成端基含8个甲氧基偶氮苯介晶基元的新型树状液晶分子，并用元素分析、核磁共振(NMR)、红外光谱(IR)、差示扫描量热(DSC)和偏光显微镜(POM)表征树状液晶分子的结构与液晶性。结果表明：树枝状液晶分子在76℃表现出近晶态(S)向向列态(N)转变；在137℃表现出向列态向各相同性态转变；通过偏光显微镜观察到近晶态典型的焦锥织构，向列态典型的丝状织构。     

Synthesis of novel nematic liquid crystals containing 3,3'-dimethyl-2,2'-bipyridyl

Liquid-crystalline 3,3′-dimethyl-2,2′-bipyridyl derivatives with long 4-(alkoxyphenyl)ethynyl (-C≡C-C₆H₄-OR) groups in the 5,5′-positions were synthesized by palladium-catalysed crosscoupling reactions. The compounds exhibit exclusively nematic behaviour; for example, the hexyl derivative showed a nematic phase over the temperature range 145.2–205.0°C. On increasing the length of the terminal chain, the transition temperatures were lowered; for example, the hexadecyl derivative was nematic in the range 117.0–126.8°C.     

95 ℃水溶液体系中TiCl4溶胶水解法制备纯金红石纳米粉体(英)

Titanium dioxide (TiO2) nanoparticles of rutile phase were synthesized by hydrolysis of TiCl₄ at 95 ℃ in aqueous solution. The samples as prepared and calcined at 500 ℃ were characterized by XRD, TG-DTA and TEM. The sample as prepared was of imperfect rutile structure, and its morphology was rod-like with a diameter of 10～20 nm, a length of 20～80 nm and an aspect ratio of 2～4. The structure of the sample calcined at 500 ℃ was a perfect rutile one, and its morphology was rod-like with a diameter of 15～25 nm, a length of 25～105 nm and an aspect ratio of 2～4. These results indicate that calcination temperature has a positive effect on the structure and the size of rutile nanocrystals, and has no effect on the aspect ratio of rutile nanocrystal. A model for the formation mechnism of rutile nanocrystal in aqueous solution under hydrolysis conditions has been proposed.     

氩蒸气在球形固体颗粒上异质核化的分子动力学模拟

异质核化在大气中广泛存在, 但是其微观核化机理鲜为人知, 本文应用分子动力学方法模拟过热氩蒸气在纳米球形固体颗粒物上异质核化的动态特性, 讨论不同的冷却率对核化过程中系综温度、团簇分布、团簇大小以及核化速率的影响. 结果显示, 系综内蒸气的核化温度随着冷却率的增加而降低, 预先存在的球形固体颗粒在团簇的形成阶段起着重要的作用, 而且存在一个临界冷却率1.80×10^-9J·s^-1. 在该冷却率下, 在异质核化系综内均质核化出现, 并与异质核化共存, 但是异质核化在整个核化过程中仍然占主导地位.     

Synthesis of Liquid Crystalline Polymers with Side Chains

The present paper covers the synthesis and characterization of several intermediate products, monomer, and polymers. 3-{ 2-[ 4-( 4-Nitrophenylazo ) phenoxy] ethyloxycarbonyl} propanoyloxy (2-hydroxy) propyl acrylate (4) was prepared by the ring-opening reaction of glycidyl acrylate with the monoester of succinic acid (3). The polymers (5) with different molecular weights were prepared by the free-radical polymerization. The polymers (5) had liquid crystalline behavior without decomposition as revealed by DSC, optical microscope.     

Sn-Pb合金颗粒异质成核及其冷却凝固行为预测

The Sn-5%Pb droplets with sizes of 150 and 185 μm were generated by Uniform Droplet Spray（UDS） under N2 atmosphere with 1. 36 μmol / L oxygen. The appearance of Sn-5%Pb droplets under the optical microscope showed that the droplets are uniform and spherical. The method employed non-adiabatic calorimetry to determine the nucleation point and undercooling of droplets. The fraction covered by oxide was calculated as a function of time and temperature. The model for heterogeneous nucleation catalyzed by oxidation on the droplet surface was developed,which was a reasonable expression of the heterogeneous nucleation and solidification behavior of Sn-Pb droplets. The CCT curves were computed using above experimental results under the heterogeneous surface nucleation of droplet. The same model can be applied to predict the heterogeneous nucleation behavior of the droplets for any type of cooling schedule. The calculation results are very reliable based on the experimental data.     

Preparation of highly exfoliated epoxy/clay nanocomposites by clay grafted with liquid crystalline epoxy

Epoxy/clay nanocomposites with a high degree of exfoliation were achieved by intercalating liquid crystalline epoxy into clay intragallery as well as using a so-called ‘solution compounding’ process. In this process, clay modified was first treated with trichloromethane to form organoclay-trichloromethane suspension followed by liquid crystalline epoxy modification. The liquid crystalline epoxy grafted clay was then mixed extensively with epoxy to form epoxy/nanoclay composites. The mechanism of exfoliation was explored by monitoring the change of morphology of organoclay during each stage of processing with X-ray diffraction (XRD). The liquid crystalline epoxy grafted clay synthesised was characterised by fourier transform infrared spectroscopy (FT-IR) and polarising optical microscopy (POM). The clay platelets uniformly dispersed and highly exfoliated in the whole epoxy matrix were observed using transmission electron microscopy (TEM) and FT-IR imaging system. The epoxy nanocomposites were fabricated by incorporating different liquid crystalline epoxy grafted clay loading. The results revealed that the incorporation of liquid crystalline epoxy grafted clay resulted in a significant improvement in glass transition temperature (Tg) derived from dynamic mechanical analysis (DMA) and thermal stability measured by thermogravimetric analysis (TGA).