Electro-optomechanical cooperative cooling of nanomechanical oscillator beyond resolved sideband regime

We propose a ground-state cooling scheme for a nanomechanical oscillator(NMO)that interacts with an optical cavity via radiation pressure at one side and with a superconducting microwave cavity via a capacitor at the other side.By driving these two cavities on their respective red sidebands with extra laser and microwave fields,the NMO’s dual cooling channel is created through electro-optomechanical cooperation.Differing from the conventional optomechanical system with a single optical cavity wherein ground-state cooling is limited in the resolved sideband,the proposed scheme allows the optical cavity to function in an unresolved sideband regime under the cooperation of a microwave cavity with a high quality factor,or vice versa.In a weak coupling regime we demonstrate that the NMO can be cooled to near its ground-state from a finite temperature with a cooling rate that is significantly faster than that of the single-cavity optomechanical system.The heating process can be completely suppressed by the cooperation of the dual cooling channel by appropriately selecting the system’s parameters.With a decreasing thermal phonon number,the numerical results of final mechanical occupancy gradually approach the analytical cooling limit.     

双光腔耦合下机械振子的基态冷却

机械振子的基态冷却是腔量子光力学中的基本问题之一.所谓的基态冷却就是让机械振子的稳态声子数小于1.本文通过光压涨落谱和稳态声子数研究双光腔光力系统(标准单光腔光力系统中引入第二个光腔,并与第一个光腔直接耦合)的基态冷却.首先得到系统的有效哈密顿量,然后给出朗之万方程和速率方程,最后分别给出空腔和原子腔的光压涨落谱、冷却率和稳态声子数.通过光压涨落谱、冷却率和稳态声子数表达式,重点讨论空腔时机械振子的基态冷却,发现当满足最佳参数条件(机械振子的冷却跃迁速率对应光压涨落谱的最大值,而加热跃迁速率对应光压涨落谱的最小值)时,机械振子可以被冷却到稳态声子数足够少.此外分析:当辅助腔内注入原子系综时,若参数选择恰当可能更利于基态冷却.     

Nonreciprocal ground-state cooling of mechanical resonator in a spinning optomechanical system

We theoretically present a scheme for nonreciprocal ground-state cooling in a double-cavity spinning optomechanical system which is consisted of an optomechanical resonator and a spinning optical harmonic resonator with directional driving. The optical Sagnac effect generated by the whispering-gallery cavity (WGC) rotation creates frequency difference between the WGC mode, we found that the mechanical resonator (MR) can be cooled to the ground state when the propagation direction of driving light is opposite to the spin direction of the WGC, but not from the other side, vice versa, so that the nonreciprocal cooling is achieved. By appropriately selecting the system parameters, the heating process can be completely suppressed due to the quantum interference effect. The proposed approach provides a platform for quantum manipulation of macroscopic mechanical devices beyond the resolved sideband limit.     

Normal mode splitting and ground state cooling in a Fabry-Perot optical cavity and transmission line resonator

Optomechanical dynamics in two systems which are a transmission line resonator and Fabrya-Perot optical cavity via radiation-pressure are investigated by linearized quantum Langevin equation. We work in the resolved sideband regime where the oscillator resonance frequency exceeds the cavity linewidth. Normal mode splittings of the mechanical resonator as a pure result of the coupling interaction in the two optomechanical systems is studied, and we make a comparison of normal mode splitting of mechanical resonator between the two systems. In the optical cavity, the normal mode splitting of the movable mirror approaches the latest experiment very well. In addition, an approximation scheme is introduced to demonstrate the ground state cooling, and we make a comparison of cooling between the two systems dominated by two key factors, which are the initial bath temperature and the mechanical quality factor. Since both the normal mode splitting and cooling require working in the resolved sideband regime, whether the normal mode splitting influences the cooling of the mirror is considered. Considering the size of the mechanical resonator and precooling the system, the mechanical resonator in the transmission line resonator system is easier to achieve the ground state cooling than in optical cavity.     

Enhancing optomechanical force sensing via precooling and quantum noise cancellation

We theoretically investigate optomechanical force sensing via precooling and quantum noise cancellation in two coupled cavity optomechanical systems.We show that force sensing based on the reduction of noise can be used to dramatically enhance the force sensing and that the precooling process can eifectively improve the quantum noise cancellation.Specifically,we examine the effect of optomechanical cooling and noise reduction on the spectral density of the noise of the force measurement;these processes can significantly enhance the performance of optomechanical force sensing,and setting up the system in the resolved sideband regime can lead to an optimization of the cooling processes in a hybrid system.Such a scheme serves as a promising platform for quantum back-action-evading measurements of the motion and a framework for an optomechanical force sensor.     

Modulation‐Based Atom‐Mirror Entanglement and Mechanical Squeezing in an Unresolved‐Sideband Optomechanical System

A hybrid optomechanical system which is composed of an atomic ensemble and a standard optomechanical cavity driven by a periodically modulated external laser field is investigated. Based on the simple periodic modulation forms of the driving amplitude and effective optomechanical coupling, respectively, the atom‐mirror entanglement is discussed in detail. It is found that the maximum of the entanglement in the unresolved‐sideband regime can be further enhanced compared with the non‐modulation regime. On the other hand, we find that the introduction of the atomic ensemble permits the mechanical squeezing induced by the periodic amplitude modulation can be successfully generated even in the unresolved‐sideband regime. Due to the self‐cooling mechanism constructed by the atomic ensemble, the mechanical squeezing scheme no longer requires the extra precooling technologies.     

Dissipative optomechanics in a Michelson-Sagnac interferometer

Dissipative optomechanics studies the coupling of the motion of an optical element to the decay rate of a cavity. We propose and theoretically explore a realization of this system in the optical domain, using a combined Michelson-Sagnac interferometer, which enables a strong and tunable dissipative coupling. Quantum interference in such a setup results in the suppression of the lower motional sideband, leading to strongly enhanced cooling in the non-sideband-resolved regime. With state-of-the-art parameters, ground-state cooling and low-power quantum-limited position transduction are both possible. The possibility of a strong, tunable dissipative coupling opens up a new route towards observation of such fundamental optomechanical effects as nonlinear dynamics. Beyond optomechanics, the suggested method can be readily transferred to other setups involving nonlinear media, atomic ensembles, or single atoms.     

非线性光学腔中的相位调制光机械动力学

研究了Fabry-Perot光学腔中包含一个光学参量放大器来增强腔场与机械振子之间的耦合的光机械动力学行为.在解析边带机制下用量子郞之万方程具体研究了振子的涨落光谱、光学多稳态行为、机械阻尼与修正共振频移和基态冷却.通过数值解讨论了辐射压力诱导机械振子和腔场的稳态振幅所展现的光学多稳态行为,同时也分析了辐射压力引起的修正共振频移和机械阻尼与参量增益、输入激光功率和参量相位这三个因素的关系.此外,随着调节泵浦场的参量相位,振子的涨落光谱呈现简正模式分裂.通过精确求解最终有效声子数论证了基态冷却.结果表明,机械振子的冷却由初始浴温度、机械品质因数和参量相位这个三个因素控制.参量相提供一个新的方法来操控非线性光机械动力学.     

强耦合光机械腔中的简正模式分裂和冷却

研究由辐射压力与驱动Fabry-Perot光学腔相耦合而产生的腔光机械动力学行为. 通过量子朗之万方程具体研究了机械振子的涨落光谱、机械阻尼与共振频移和基态冷却. 随着输入激光功率的增加,振子的涨落光谱呈现简正模式分裂的现象,并且数值模拟结果和实验结果相符合. 同时推导了有效机械阻尼和共振频移. 红移边带导致了机械模的冷却,蓝移边带引起了机械模的放大. 此外,引入一种近似机制来研究振子的基态冷却,并且考虑在解析边带机制下简正模式分裂对机械振子冷却的影响. 最后,数值讨论了初始浴温度、输入激光功率和机械品质因数这三个因素对机械振子冷却的影响. 关键词： 腔光机械 辐射压力 简正模式分裂 冷却     

Quantum theory of cavity-assisted sideband cooling of mechanical motion

We present a quantum-mechanical theory of the cooling of a cantilever coupled via radiation pressure to an illuminated optical cavity. Applying the quantum noise approach to the fluctuations of the radiation pressure force, we derive the optomechanical cooling rate and the minimum achievable phonon number. We find that reaching the quantum limit of arbitrarily small phonon numbers requires going into the good-cavity (resolved phonon sideband) regime where the cavity linewidth is much smaller than the mechanical frequency and the corresponding cavity detuning. This is in contrast to the common assumption that the mechanical frequency and the cavity detuning should be comparable to the cavity damping.     

Dissipation-induced topological phase transition and periodic-driving-induced photonic topological state transfer in a small optomechanical lattice

We propose a scheme to investigate the topological phase transition and the topological state transfer based on the small optomechanical lattice under the realistic parameters regime.We find that the optomechanical lattice can be equivalent to a topologically nontrivial Su-Schrieffer Heeger(SSH)model via designing the effective optomechanical coupling.Especially,the optomechanical lattice experiences the phase transition between topologically nontrivial SSH phase and topologically trivial SSH phase by controlling the decay of the cavity field and the opto mechanical coupling.We stress that the to pological phase transition is mainly induced by the decay of the cavity field,which is counter-intuitive since the dissipation is usually detrimental to the system.Also,we investigate the photonic state transfer between the two cavity fields via the topologically protected edge channel based on the small optomechanical lattice.We find that the quantum st ate transfer assisted by the topological zero energy mode can be achieved via implying the external lasers with the periodical driving amplitudes into the cavity fields.Our scheme provides the fundamental and the insightful explanations towards the mapping of the photonic topological insulator based on the micro-nano optomechanical quantum optical platform.     

Review of cavity optomechanical cooling

Quantum manipulation of macroscopic mechanical systems is of great interest in both fundamental physics and ap- plications ranging from high-precision metrology to quantum information processing. For these purposes, a crucial step is to cool the mechanical system to its quantum ground state. In this review, we focus on the cavity optomechanical cooling, which exploits the cavity enhanced interaction between optical field and mechanical motion to reduce the thermal noise. Recent remarkable theoretical and experimental efforts in this field have taken a major step forward in preparing the mo- tional quantum ground state of mesoscopic mechanical systems. This review first describes the quantum theory of cavity optomechanical cooling, including quantum noise approach and covariance approach; then, the up-to-date experimental progresses are introduced. Finally, new cooling approaches are discussed along the directions of cooling in the strong coupling regime and cooling beyond the resolved sideband limit.     

Controllable Photon Transport in a Three-Mode Optomechanical System with the Non-Rotating Wave Approximation Effect

We propose a scheme for realizing controllable photon transport in a three-mode optomechanical system comprising one cavity and two mechanical modes. We found that the non-rotating wave approximation effect can cause the ideal optomechanically induced transparency of the output field. The effects of the cavity mode decay rate on the width of the optomechanically induced transparency window, the dispersion curve slope are discussed in the resolved sideband regime and the unresolved sideband regime.

     

Ground-state cooling based on a three-cavity optomechanical system in the unresolved-sideband regime

In the unresolved sideband regime,we propose a scheme for cooling mechanical resonator close to its ground state in a three-cavity optomechanical system,where the auxiliary cavities are indirectly connected with the mechanical resonator through standard optomechanical subsystem.The standard optomechanical subsystem is driven by a strong pump laser field.With the help of the auxiliary cavities,the heating process is suppressed and the cooling process of the mechanical resonator is enhanced.More importantly,the average phonon number is much less than 1 in a larger range.This means that the mechanical resonator can be cooled down to its ground state.All these interesting features will significantly promote the physical realization of quantum effects in multi-cavity optomechanical systems.     

非线性光学腔中的相位调制光机械动力学

研究了Fabry-Perot光学腔中包含一个光学参量放大器来增强腔场与机械振子之间的耦合的光机械动力学行为.在解析边带机制下用量子郎之万方程具体研究了振子的涨落光谱、光学多稳态行为、机械阻尼与修正共振频移和基态冷却,通过数值解讨论了辐射压力诱导机械振子和腔场的稳态振幅所展现的光学多稳态行为,同时也分析了辐射压力引起的修...     

腔光力学系统中的量子测量

腔光力学系统近年来迅猛发展, 在精密测量、量子传感等方面已展现出重要的应用价值. 特别是与微纳技术和冷原子技术结合后, 这一系统正发展成为研究量子测量与量子操控的理想平台. 本文首先综述腔光力学在量子测量, 尤其是量子测量基础理论研究方面的进展; 然后分析腔光力学系统中的量子测量原理; 最后介绍我们近来在这方面的研究进展, 并通过我们设计的一系列新颖的基于腔光力学系统的量子测量方案来具体展示该系统在量子测量、量子操控等方面的潜在应用.     

All-optical optomechanics: an optical spring mirror

The dominant hurdle to the operation of optomechanical systems in the quantum regime is the coupling of the vibrating element to a thermal reservoir via mechanical supports. Here we propose a scheme that uses an optical spring to replace the mechanical support. We show that the resolved-sideband regime of cooling can be reached in a configuration using a high-reflectivity disk mirror held by an optical tweezer as one of the end mirrors of a Fabry-Perot cavity. We find a final phonon occupation number of the trapped mirror n=0.56 for reasonable parameters, the limit being set by our approximations, and not any fundamental physics. This demonstrates the promise of dielectric disks attached to optical springs for the observation of quantum effects in macroscopic objects.     

Generation of Optical and Mechanical Squeezing in the Linear‐and‐Quadratic Optomechanics

Generation of strong stationary optical and mechanical squeezing is proposed for the linear‐and‐quadratic optomechanical system, where two cavity modes induce linear and quadratic optomechanical couplings, respectively. Through the linearization treatment, linearized coupling between cavity mode and mechanical mode and the mechanical parametric amplification process are achievable and controllable by independent driving lasers. Optical and mechanical squeezing are generated following different mechanisms. Optical squeezing works in the strong coupling regime, and mechanical amplification would push the system close to instability threshold, which could deeply improve ponderomotive squeezing even significantly beyond the 3 dB squeezing limit. Mechanical squeezing is generated based on the reservoir engineering method, where parametric amplification induces the squeezing transformation of mechanical mode; and linearized coupling, which operates in the red‐sideband and weak coupling limits, induces the ground‐state cooling of transformed mechanical mode. Finally, the original mechanical mode would be squeezed, which could also exceed 3 dB limit.     

Suppression of Stokes heating processes and improved optomechanical cooling with frequency modulation

Ground-state cooling of mesoscopic mechanical objects is still a major challenge in the unresolved-sideband regime. We present a frequency modulation (FM) scheme to achieve cooling of the mechanical resonator to its ground-state in a double-cavity optomechanical system containing a mechanical resonator. The mean phonon number is determined by numerically solving a set of differential equations derived from the quantum master equations. Due to efficient suppression of Stokes heating processes in the presence of FM, the ground-state cooling, indicated by numerical calculations, is significantly achievable, regardless of whether in the resolved-sideband regime or the unresolved-sideband regime. Furthermore, by choosing parameters reasonably, the improvement of the quantum cooling limit is found to be capable of being positively correlated with the modulation frequency. This method provides new insight into quantum manipulation and creates more possibilities for applications of quantum devices.