Vibrational mode and collision energy effects on reaction of H2CO+ with C2H2: charge state competition and the role of Franck-Condon factors in endoergic charge transfer

The effects of collision energy (E(col)) and six different H(2)CO(+) vibrational states on the title reaction have been studied over the center-of-mass E(col) range from 0.1 to 2.6 eV, including measurements of product ion recoil velocity distributions. Ab initio and Rice-Ramsperger-Kassel-Marcus calculations were used to examine the properties of complexes and transition states that might be important in mediating the reaction. Reaction is largely direct, despite the presence of multiple deep wells on the potential surface. Five product channels are observed, with a total reaction cross section at the collision limit. The competition among the major H(2) (+) transfer, hydrogen transfer, and proton transfer channels is strongly affected by E(col) and H(2)CO(+) vibrational excitation, providing insight into the factors that control competition and charge state "unmixing" during product separation. One of the more interesting results is that endoergic charge transfer appears to be controlled by Franck-Condon factors, implying that it occurs at large inter-reactant separations, contrary to the expectation that endoergic reactions should require intimate collisions to drive the necessary energy conversion.     

Reaction of HOD+ with NO2: effects of OD and OH stretching, bending, and collision energy on reactions on the singlet and triplet potential surfaces

Integral cross sections and product recoil velocity distributions were measured for the reaction of HOD(+) with NO(2), in which the HOD(+) reactant was prepared in its ground state and with mode-selective excitation in the 001 (OH stretch), 100 (OD stretch), and 010 (bend) modes. In addition, we measured the 300 K thermal kinetics in a selected ion flow tube reactor and report product branching ratios different from previous measurements. Reaction is found to occur on both the singlet and triplet surfaces with near-unit efficiency. At 300 K, the product branching indicates that triplet → singlet transitions occur in about 60% of triplet-coupled collisions, which we attribute to long interaction times mediated by complexes on the triplet surface. Because the collision times are much shorter in the beam experiments, the product distributions show no signs of such transitions. The dominant product on the singlet surface is charge transfer. Reactions on the triplet surface lead to NO(+), NO(2)H(+), and NO(2)D(+). There is also charge transfer, producing NO(2)(+) (a(3)B(2)); however, this triplet NO(2)(+) mostly predissociates. The NO(2)H(+)/NO(2)D(+) cross sections peak at low collision energies and are insignificant above ~1 eV due to OH/OD loss from the nascent product ions. The effects of HOD(+) vibration are mode-specific. Vibration inhibits charge transfer, with the largest effect from the bend. The NO(2)H(+)/NO(2)D(+) channels are also vibrationally inhibited, and the mode dependence reveals how energy in different reactant modes couples to the internal energy of the product ions.     

Reaction dynamics of OH+(3Sigma-)+C2H2 studied with crossed beams and density functional theory calculations

The reactions between OH+(3Sigma-) and C2H2 have been studied using crossed ion and molecular beams and density functional theory calculations. Both charge transfer and proton transfer channels are observed. Products formed by carbon-carbon bond cleavage analogous to those formed in the isoelectronic O(3P)+C2H2 reaction, e.g., 3CH2 + HCO+, are not observed. The center of mass flux distributions of both product ions at three different energies are highly asymmetric, with maxima close to the velocity and direction of the precursor acetylene beam, characteristic of direct reactions. The internal energy distributions of the charge transfer products are independent of collision energy and are peaked at the reaction exothermicity, inconsistent with either the existence of favorable Franck-Condon factors or energy resonance. In proton transfer, almost the entire reaction exothermicity is transformed into product internal excitation, consistent with mixed energy release in which the proton is transferred with both the breaking and forming bonds extended. Most of the incremental translational energy in the two higher-energy experiments appears in product translational energy, providing an example of induced repulsive energy release.     

Reactivity of the CHBr2+ dication toward molecular hydrogen

Structural aspects as well as the stability and reactivity of the CHBr(2+) dication are studied both experimentally and theoretically. Translational energy distributions of the CHBr(+) products from charge transfer between CHBr(2+) and Kr indicate that the dication exists in two isomeric forms, H-C-Br(2+) and C-Br-H(2+). In the reaction of CHBr(2+) with H(2), the dominant channel corresponds to proton transfer leading to CBr(+) + H(3)(+). Other reaction channels involve the formation of the intermediates CH(3)Br(2+) and CH(2)BrH(2+), respectively. Both of the latter dications can either lose a proton to form CH(2)Br(+) or undergo a spin-isomerization followed by cleavage of the C-Br bond. The proposed mechanisms are supported by DFT calculations and deuterium labeling experiments.     

H+ versus D+) transfer from HOD+ to N2: mode- and bond-selective effects

Reactions of HOD(+) with N(2) have been studied for HOD(+) in its ground state and with one quantum of excitation in each of its vibrational modes: (001)--predominately OH stretch, 0.396 eV, (010)--bend, 0.153 eV, and (100)--predominately OD stretch, 0.293 eV. Integral cross sections and product recoil velocities were recorded for collision energies from threshold to 4 eV. The cross sections for both H(+) and D(+) transfer rise slowly from threshold with increasing collision energy; however, all three vibrational modes enhance reaction much more strongly than equivalent amounts of collision energy and the enhancements remain large even at high collision energy, where the vibration contributes less than 10% of the total energy. Excitation of the OH stretch enhances H(+) transfer by a factor of ～5, but the effect on D(+) transfer is only slightly larger than that from an equivalent increase in collision energy, and smaller than the effect from the much lower energy bend excitation. Similarly, OD stretch excitation strongly enhances D(+) transfer, but has essentially no effect beyond that of the additional energy on H(+) transfer. The effects of the two stretch vibrations are consistent with the expectation that stretching the bond that is broken in the reaction puts momentum in the correct coordinate to drive the system into the exit channel. From this perspective it is quite surprising that bend excitation also results in large (factor of 2) enhancements of both H(+) and D(+) transfer channels, such that its effect on the total cross section at collision energies below ～2 eV is comparable to those from the two stretch modes, even though the bend excitation energy is much smaller. For collision energies above ～2 eV, the vibrational effects become approximately proportional to the vibrational energy, though still much larger than the effects of equivalent addition of collision energy. Measurements of the product recoil velocity distributions show that reaction is direct at all collision energies, with roughly half the products in a sharp peak corresponding to stripping dynamics and half with a broad and approximately isotropic recoil velocity distribution. Despite the large effects of vibrational excitation on reactivity, the effects on recoil dynamics are small, indicating that vibrational excitation does not cause qualitative changes in the reaction mechanism or in the distribution of reactive impact parameters.     

Dynamics study of the reaction OH- + C2H2-->C2H- + H2O with crossed beams and density-functional theory calculations

The proton transfer reaction between OH- and C2H2, the sole reactive process observed over the collision energy range from 0.37 to 1.40 eV, has been studied using the crossed beam technique and density-functional theory (DFT) calculations. The center of mass flux distributions of the product C2H- ions at three different energies are highly asymmetric, characteristic of a direct process occurring on a time scale much less than a rotational period of any transient intermediate. The maxima in the flux distributions correspond to product velocities and directions close to those of the precursor acetylene reactants. The reaction quantitatively transforms the entire exothermicity into internal excitation of the products, consistent with an energy release motif in which the proton is transferred early, in a configuration in which the forming bond is extended. This picture is supported by DFT calculations showing that the first electrostatically bound intermediate on the reaction pathway is the productlike C2H- H2O species. Most of the incremental translational energy in the two higher collision energy experiments appears in product translational energy, and provides an example of induced repulsive energy release characteristic of the heavy+light-heavy mass combination.     

Velocity map imaging of ion-molecule reactive scattering: the Ar(+)+ N(2) charge transfer reaction

We present a velocity map imaging spectrometer for the study of crossed-beam reactive collisions between ions and neutrals at (sub-)electronvolt collision energies. The charge transfer reaction of Ar(+) with N(2) is studied at 0.6, 0.8 and 2.5 eV relative collision energies. Energy and angular distributions are measured for the reaction product N. The differential cross section, as analyzed with a Monte Carlo reconstruction algorithm, shows significant large angle scattering for lower collision energies in qualitative agreement with previous experiments. Significant vibrational excitation of N(+)(2) is also observed. This theoretically still unexplained feature indicates the presence of a low energy scattering resonance.     

Reaction dynamics study of O- + C2H2 with crossed beams and density-functional theory calculations

The reactions between O(-) and C(2)H(2) have been studied using the crossed-beam technique and density-functional theory (DFT) calculations in the collision energy range from 0.35 to 1.5 eV (34-145 kJmol). Both proton transfer and C-O bond formation are observed. The proton transfer channel forming C(2)H(-) is the dominant pathway. The center-of-mass flux distributions of the C(2)H(-) product ions are highly asymmetric, with maxima close to the velocity and direction of the precursor acetylene beam, characteristic of direct reactions. The reaction quantitatively transforms the entire reaction exothermicity into internal excitation of the products, consistent with mixed energy release in which the proton is transferred in a configuration in which both the breaking and the forming bonds are extended. The C-O bond formation channel producing HC(2)O(-) displays a distinctive kinematic picture in which the product distribution switches from predominantly forward scattering with a weak backward peak to sideways scattering as the collision energy increases. At low collision energies, the reaction occurs through an intermediate that lives a significant fraction of a rotational period. The asymmetry in the distribution leads to a lifetime estimate of 600 fs, in reasonable agreement with DFT calculations showing that hydrogen-atom migration is rate limiting. At higher collision energies, the sideways-scattered products arise from repulsive energy release from a bent transition state.     

Bond-forming reactions of dications with molecules: a computational and experimental study of the mechanisms for the formation of HCF2+ from CF3(2+) and H2

The QCISD and QCISD(T) quantum chemical methods have been used to characterize the energetics of various possible mechanisms for the formation of HCF2+ from the bond-forming reaction of CF3(2+) with H2. The stationary points on four different pathways leading to the product combinations HCF2+ + H+ + F and HCF2+ + HF+ have been calculated. All four pathways begin with the formation of a collision complex [H2-CF3]2+, followed by an internal hydrogen atom migration to give HC(FH)F2(2+). In two of the mechanisms, immediate charge separation of HC(FH)F2(2+) via loss of either HF+ or a proton, followed by loss of an F atom, yields the experimentally observed bond-forming product HCF2+. For the other two mechanisms, internal hydrogen rearrangement of HC(FH)F2(2+) to give C(FH)2F(2+), followed by charge separation, yields the product CF2H+. This product can then overcome a 2.04 eV barrier to rearrange to the HCF2+ isomer, which is 1.80 eV more stable. All four calculated mechanisms are in agreement with the isotope effects and collision energy dependencies of the product ion cross sections that have been previously observed experimentally following collisions between CF3(2+) and H2/D2. We find that in this open-shell system, CCSD(T) and QCISD(T) T1-diagnostic values of up to 0.04 are acceptable. A series of angularly resolved crossed-beam scattering experiments on collisions of CF3(2+) with D2 have also been performed. These experiments show two distinct channels leading to the formation of DCF2+. One channel appears to correspond to the pathway leading to the ground state 1DCF2+ + D+ + F product asymptote and the other to the 3DCF2+ + D+ + F product asymptote, which is 5.76 eV higher in energy. The experimental kinetic energy releases for these channels, 7.55 and 1.55 eV respectively, have been determined from the velocities of the DCF2+ product ion and are in agreement with the reaction mechanisms calculated quantum chemically. We suggest that both of these observed experimental channels are governed by the reaction mechanism we calculate in which charge separation occurs first by loss of a proton, without further hydrogen atom rearrangement, followed by loss of an F atom to give the final products 1DCF2+ + D+ + F or 3DCF2+ + D+ + F.     

Experimental studies of the dynamics of the bond-forming reactions of CF2(2+) with H2O using position-sensitive coincidence spectroscopy

The dynamics of the product channels forming OCF(+)+H(+)+HF and HCF(2) (+)+H(+)+O following the collisions of CF(2) (2+) with H(2)O have been investigated with a new position-sensitive coincidence experiment at a center-of-mass collision energy of 5.6 eV. The results show the formation of OCF(+) occurs via the formation of a doubly charged collision complex [H(2)O-CF(2)](2+) which subsequently undergoes a charge separating dissociation to form H(+) and HOCF(2) (+). The HOCF(2) (+) monocation subsequently fragments to form HF+OCF(+). The lifetimes of the collision complex and the HOCF(2) (+) ion are at least of the order of their rotational period. The kinetic energy release in this reaction indicates that it involves the ground state of CF(2) (2+) and forms the ground electronic states of OCF(+) and HF. The mechanism for forming HCF(2) (+) involves the direct and rapid abstraction of a hydride ion from H(2)O by CF(2) (2+). The resulting OH(+) ion subsequently fragments to H(+)+O, on a time scale at least comparable with its rotational period.     

Crossed beams and theoretical studies of the dynamics of hyperthermal collisions between Ar and ethane

Crossed molecular beams experiments and classical trajectory calculations have been used to study the dynamics of Ar+ethane collisions at hyperthermal collision energies. Experimental time-of-flight and angular distributions of ethane molecules that scatter into the backward hemisphere (with respect to their original direction in the center-of-mass frame) have been collected. Translational energy distributions, derived from the time-of-flight distributions, reveal that a substantial fraction of the collisions transfer abnormally large amounts of energy to internal excitation of ethane. The flux of the scattered ethane molecules increased only slightly from directly backward scattering to sideways scattering. Theoretical calculations show angular and translational energy distributions which are in reasonable agreement with the experimental results. These calculations have been used to examine the microscopic mechanism for large energy transfer collisions ("supercollisions"). Collinear ("head-on") or perpendicular ("side-on") approaches of Ar to the C-C axis of ethane do not promote energy transfer as much as bent approaches, and collisions in which the H atom is "sandwiched" in a bent Ar...H-C configuration lead to the largest energy transfer. The sensitivity of collisional energy transfer to the intramolecular potential energy of ethane has also been examined.     

Charge inversion mass spectrometry: dissociation of resonantly neutralized molecules

Charge inversion mass spectrometry is an MS/MS method in which the electric charge of the precursor ions is opposite to that of the secondary product ions. Charge inversion mass spectrometry is classified into four types depending on the electric charge and time scale of collisions. Charge inversion mass spectrometry using collisions with gaseous targets in the keV energy collision range has provided insights into the structures and reactions of ions and neutral molecules. The characteristics of charge inversion experiments are presented in terms of the reaction endothermicities and the cross sections and their dependence on the target species. In the case of rare-gas or simple molecular targets, double-electron transfer in one collision is effective to form positive ions from negative ions, while, in the case of alkali metal targets, successive single-electron transfers in two collisions is effective to form negative ions from positive ions. On the basis of the observed target-density dependence of the product ion intensity and thermochemical considerations for internal energy distribution using thermometer molecules, the charge inversion processes using alkali metal targets have been confirmed to occur by electron transfers in successive collisions and the dissociation processes are found to occur in energy-selected neutral species formed from near-resonant neutralization with alkali metal targets. While collisionally activated dissociation (CAD) is due to dissociation of activated ions with broad internal energy distributions, the charge inversion process using alkali metal targets is due to dissociation of energy-selected neutral species with narrow internal energy distributions. The charge inversion/alkali metal spectra provide clear differentiation of the isomeric cations of C(2)H(2), C(3)H(4) and dichlorobenzenes. The CAD spectra of these isomeric cations are similar.     

A crossed-beam study of low energy Ar + H2O collisions: Charge transfer and chemical reaction

Dynamics of Ar⁺ + H₂O collisions, charge transfer (H₂O⁺ formation) and chemical reaction (ArH⁺ formation), was investigated in crossed-beam experiments in the collision energy range 1–3 eV. The charge transfer occurs both by a simple-electron-jump mechanism and in impulsive intimate collisions. The distributions of relative translational energy of the products show that, most probably, the collisions are only slightly superelastic (by about 0.1 eV), and thus the product H₂O⁺ is highly internally excited. Formation of a small amount of H₂O⁺(B²B₂) in very inelastic collisions was observed. The chemical reaction is a direct process with characteristics of the spectator stripping mechanism.     

Imaging ion-molecule reactions: charge transfer and C-N bond formation in the C(+) + NH3 system

The velocity mapping ion imaging method is applied to the ion-molecule reactions occurring between C(+) and NH(3). The velocity space images are collected over the relative collision energy range from 1.5 to 3.3 eV, allowing both product kinetic energy distributions and angular distributions to be obtained from the data. The charge transfer process appears to be direct, dominated by long-range electron transfer that results in minimal deflection of the products. The product kinetic energy distributions are consistent with a process dominated by energy resonance. The kinetic energy distributions for C-N bond formation appear to scale with the total available energy, providing strong evidence that energy in the [CNH(3)](+) precursor to products is distributed statistically. The angular distributions for C-N bond formation show pronounced forward-backward symmetry, as expected for a complex that resembles a prolate symmetric top decaying along its symmetry axis.     

Electron transfer collisions between isolated fullerene dianions and SF6

Electron transfer collisions of trapped doubly charged fullerene anions C76(2-), C(78)2-, and C84(2-) with SF6 are studied in a Fourier transform ion cyclotron resonance mass spectrometer at center-of-mass collisional energies ranging from thermal energy to 77 eV. Collision energy dependencies manifest threshold energies for (nominally exoergic) single electron transfer onto SF6 of 1.46+/-0.3 eV, 1.56+/-0.3 eV, and 1.63+/-0.3 eV for C(76)2-, C78(2-), and C(84)2-, respectively. Kinetics studies reveal charge-transfer cross sections of up to 430+/-200 A2 for C84(2-) at a collision energy of 77 eV. The mechanism and the energetics are discussed in terms of classical electrostatic model calculations. Additionally, we rationalize the collision energy dependencies of the charge-transfer cross sections using the two-state Landau-Zener formalism to describe the associated resonant electron tunneling probability.     

Luminescence measurements of Xe(+) + N2 and Xe(2+) + N2 hyperthermal charge transfer collisions

Luminescence spectra are recorded for collisions between Xe(+)/Xe(2+) and molecular nitrogen at energies ranging from 4.5 to 316 eV in the center-of-mass frame. In the Xe(+) + N(2) collision system, evidence for luminescent charge-transfer products is only found through Xe I emission lines. The most intense features of the luminescence spectra are attributed to atomic N emissions observed above ～20 eV. Intense N(2)(+) A (2)Π(u) - X(2)Σ(g)(+) and B(2)Σ(u)(+) - X(2)Σ(g)(+) radiance is observed from Xe(2+) + N(2) collisions. The B state formation cross section decreases with collision energy until 20 eV, after which it becomes independent of impact energy with an approximate value of 3 ?(2). The cross section for N(2) (+) A (ν > 0) formation increases with energy until 20 eV, after which it remains nearly constant at ～1 ?(2). The N(2)(+) product vibrational distributions extracted from the spectra are non-Franck-Condon for both electronic product states at low collision energies. The distributions resemble a Franck-Condon distribution at the highest energies investigated in this work.     

Endgroup-assisted siloxane bond cleavage in the gas phase

Unimolecular dissociation of H(2)N(CH(2))(3)SiOSi(CH(2))(3)NH(3)(+) generates SiC(5)H(16)NO(+) and SiC(5)H(14)N(+). The formation of SiC(5)H(16)NO(+) involves dissociation of a Si[bond]O bond and formation of an O[bond]H bond through rearrangement. The fragmentation mechanism was investigated utilizing ab initio calculations and Fourier transform ion cyclotron resonance (FTICR) mass spectrometry in combination with hydrogen/deuterium (H/D) exchange reactions. Sustained off-resonance irradiation collision-induced dissociation (SORI-CID) studies of the fully deuterated ion D(2)N(CH(2))(3)SiOSi(CH(2))(3)ND(3)(+) provided convincing evidence for a backbiting mechanism which involves hydrogen transfer from the terminal amine group to the oxygen to form a silanol-containing species. Theoretical calculations indicated decomposition of H(2)N(CH(2))(3)SiOSi(CH(2))(3)NH(3)(+) through a backbiting mechanism is the lowest energy decomposition channel, compared with other alternative routes. Two mechanisms were proposed for the fragmentation process which leads to the siloxane bond cleavage and the SORI-CID results of partially deuterated precursor ions suggest both mechanisms should be operative. Rearrangement to yield a silanol-containing product ion requires end groups possessing a labile hydrogen atom. Decomposition of disiloxane ions with end groups lacking labile hydrogen atoms yielded product ions from direct bond cleavages.     

Internal proton transfer and H2 rotations in the H5(+) cluster: a marked influence on its thermal equilibrium state

Classical and path integral Monte Carlo (CMC, PIMC) "on the fly" calculations are carried out to investigate anharmonic quantum effects on the thermal equilibrium structure of the H5(+) cluster. The idea to follow in our computations is based on using a combination of the above-mentioned nuclear classical and quantum statistical methods, and first-principles density functional (DFT) electronic structure calculations. The interaction energies are computed within the DFT framework using the B3(H) hybrid functional, specially designed for hydrogen-only systems. The global minimum of the potential is predicted to be a nonplanar configuration of C(2v) symmetry, while the next three low-lying stationary points on the surface correspond to extremely low-energy barriers for the internal proton transfer and to the rotation of the H2 molecules, around the C2 axis of H5(+), connecting the symmetric C(2v) minima in the planar and nonplanar orientations. On the basis of full-dimensional converged PIMC calculations, results on the quantum vibrational zero-point energy (ZPE) and state of H5(+) are reported at a low temperature of 10 K, and the influence of the above-mentioned topological features of the surface on its probability distributions is clearly demonstrated.     

Electron transfer and bond-forming reactions following collisions of Cl2+ and HCl2+ with CO

Collisions between Cl(2+) and CO have been investigated using time-of-flight mass spectrometry over a collision energy range between 2.2 eV and 7.1 eV in the centre-of-mass frame. The formation of Cl(+), CO(+) and C(+) in electron transfer reactions has been detected and an unusual bond-forming reaction which generates CCl(2+) has also been observed. The reactive cross-sections, in arbitrary units, for the electron transfer reactions have been evaluated. To extract these cross sections we employ a new method of analysing mass spectral intensities for crossed-beam experiments, an algorithm which allows inter-comparison of the fluxes of all the ionic products from the electron transfer reactions. The observed electron transfer reactivity has been rationalized by calculations based on Landau-Zener theory. To account for the observation of CCl(2+), we have calculated the relevant energetics showing that the lowest lying doublet state of this dication is bound and is energetically accessible at our collision energies. These energetic arguments indicate that electron transfer in the exit channel between the separating CCl(2+) and O atom probably forms C(+) ions via the dissociation of CCl(+). Additionally, collisions between HCl(2+) and CO have been studied at collision energies from 2.2 to 7.0 eV in the centre-of-mass frame. In this collision system, proton transfer to form HCO(+) is observed to compete efficiently with dissociative and non-dissociative electron transfer.     

H+ versus D+ transfer from HOD+ to CO2: bond-selective chemistry and the anomalous effect of bending excitation

Reactions of HOD(+) with CO(2) have been studied for HOD(+) in its ground state, and with one quantum of excitation in each of its vibrational modes: (001)--predominantly OH stretch, 0.396 eV; (010)--bend, 0.153 eV; and (100)--predominantly OD stretch, 0.293 eV. Integral cross sections and product recoil velocities were recorded for collision energies from threshold to 3 eV. The cross sections for both H(+) and D(+) transfer rise with increasing collision energy from threshold to ～1 eV, then become weakly dependent of the collision energy. All three vibrational modes enhance the total reactivity, but quite mode specifically. The H(+) transfer reaction is enhanced by OH stretch excitation, whereas OD stretch excitation has little effect. Conversely, the D(+) transfer reaction is enhanced by OD stretch excitation, while the OH stretch has little effect. Excitation of the bend strongly enhances both channels. The effects of the stretch excitations are consistent with previous studies of neutral HOD mode-selective chemistry, and can be at least qualitatively understood in terms of a late barrier to product formation. The fact that bend excitation produces the largest overall enhancement is surprising, because this is the lowest energy excitation, and is not obviously connected with the reaction coordinates for either H(+) or D(+) transfer. A rationalization in terms of the effects of water distortion on the potential surface is proposed.