Sol–gel synthesis and characterization of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–TiO<Subscript>2</Subscript> nanocrystalline powder

Al₂O₃–TiO₂ nanocrystalline powders were synthesized by sol–gel process. Aluminum sec-butoxide and titanium isopropoxide chemicals were used as precursors and ethyl acetoacetate was used as chelating agent. Thermal and crystallization behaviors of the precursor powders were investigated by thermal gravimetric-differential thermal analysis, Fourier-transform infrared spectrum and X-ray diffraction. The average crystalline size of heat treated Al₂O₃–TiO₂ powders at 1,100 °C is ~100 nm.     

Sol–gel synthesis and characterization of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> · CeO<Subscript>2</Subscript> doped with Pr ceramic pigments

Undoped x · α-Fe₂O₃ y · CeO₂ and doped with praseodymium ceramic pigments were obtained by the sol–gel method after heat treatment at 800 °C for 2 h. These pigments were characterized by XRD, nitrogen adsorption, scanning electron microscopy, ultraviolet-visible absorption spectroscopy and colorimetrical measurements. Red and brown colors with several tonalities were observed after changes with Ce and Pr concentration.     

Sol–gel synthesis of Na<Subscript>2</Subscript>CaSiO<Subscript>4</Subscript> and its in vitro biological behaviors

In this work we prepared the hybrid material (SG) by the sol–gel method through the reaction between tetraethylortosilicate (TEOS) and acetylacetonatepropyltrimethoxysilane (ACACSIL). We also immobilized the acetylacetonate on silica surface (GR) by the grafting method through the reaction between a commercial silica and ACACSIL. Infrared thermal analysis showed that these materials were thermally stable until 200 °C. SG is a microporous material and has surface area of 500 m² g⁻¹, average porous volume of 0.09 cm³ g⁻¹ and organic content of 1 mmol g⁻¹. GR is a mesoporous material and has surface area of 300 m² g⁻¹, average porous volume of 0.7 cm³ g⁻¹ and organic content of 0.4 mmol g⁻¹. Iron(III) was coordinated to SG and GR resulting in the SG–Fe and GR–Fe silicas which were tested as catalysts on the aerobic epoxidation of cis-cyclooctene. SG–Fe yielded 100% of conversion and 94% of selectivity in epoxide whereas GR–Fe silica led to a maximum conversion of 50% and 100% of selectivity.     

Sol–gel synthesis and characterization of polycrystalline GdFeO<Subscript>3</Subscript> and Gd<Subscript>3</Subscript>Fe<Subscript>5</Subscript>O<Subscript>12</Subscript> thin films

Thin films of the perovskite and garnet structured gadolinium ferrites GdFeO₃ and Gd₃Fe₅O₁₂ have been synthesized by a sol–gel method, based on stoichiometric mixtures of acetyl acetone chelated Gd³⁺ and Fe³⁺ dissolved in 2-methoxy ethanol. After spin coating onto Si wafers, and heating in air at 700 °C for 20 h, neatly grown essentially single phase films were obtained. From X-ray photoelectron spectroscopy an iron deficiency is observed in the uppermost layer of both films, implying that the crystallites preferably end in planes rich in Gd and O but not in Fe. The films were also characterized by X-ray powder diffraction, scanning electron microscopy, infrared spectroscopy, and magnetic measurements.     

Sol–gel nanocoating on commercial TiO<Subscript>2</Subscript> nanopowder using ultrasound

The surface of commercial titania particles was coated by a layer of silica by a two-step process which involved a power ultrasound initiated sol–gel reaction. In the first step of this solution process, aminosilane, i.e. organosilane with amino functional group, was used to modify the surface of pristine nanoparticles. Subsequent silica nanocoating was initiated and sustained under power ultrasound agitation in a mixture of surface modified particles and epoxysilane. As a result, a homogenous coverage of silica on the nanoparticles’ surface, with thickness controllable from one to several nanometers, was obtained. Fourier transform infrared spectroscopy (FTIR), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and particle surface zeta potential measurements were employed to follow steps in the process and to confirm the reaction mechanism.     

Sol–gel synthesis and transport property of nanocrystalline La<Subscript>2</Subscript>Mo<Subscript>2</Subscript>O<Subscript>9</Subscript> thin films

La₂Mo₂O₉ films were successfully synthesized on silicon (100) and poly-alumina substrates via modified sol–gel method with inorganic salts of La(NO₃)₃ and (NH₄)₆Mo₇O₂₄ as precursors. Pure La₂Mo₂O₉ phase was confirmed by XRD if the annealing temperature was higher than 500 °C. Energy dispersive spectrometry (EDS) of TEM revealed that the molar ratio of La to Mo was nearly 1:1. Field-emission SEM characterization showed that the films were dense, crack-free and uniform. The grain size of the films ranged from 30 to 400 nm depending upon the calcination temperature and duration time. The roughness calculated from AFM topography varied in the range between 10 and 35 nm. The thickness of the films was more than 200 nm for single-layered films. The electrical conductivity of the films reaches 0.06 S/cm at 600 °C that was almost more than one order of magnitude higher than that of the corresponding bulk material.     

Particulate sol–gel synthesis and optical and electrical properties of CeO<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> nanocomposite

CeO₂/TiO₂ nanocomposite was synthesized by particulate sol–gel method. The X-ray diffractogram shows the presence of cubic CeO₂ and anatase TiO₂ in the composite. The high resolution scanning electron micrographs reveal the nanoparticulate nature of the prepared composite. The composite absorbs UV light and exhibits near-band gap emission corresponding to TiO₂ and deep level emission due to crystal defects. The Nyquist plot displays two semicircular arcs indicating the material heterogeneity. The physicochemical characteristics of the synthesized nanocomposite are in favour of its application as an ingredient of sunscreen formulations; under UV light the photocatalytic activity of CeO₂/TiO₂ composite, tested through the degradation of rhodamine B, is very much less than that by pristine anatase TiO₂. Reduced adsorption of moisture by the nanocomposite is a possible reason for the observed very low photocatalytic activity.     

Sol–gel derived TiO<Subscript>2</Subscript> wood composites

The sol–gel process was applied to enhance properties of pine sapwood. For this purpose wood prisms were soaked in nanoscaled precursor solutions prepared from titanium(IV) n-butoxide and titanium(IV) iso-propoxide, respectively, using vacuum impregnation technique. The wet composites were cured by special program with final heat treatment at 103 °C. Weight percent gains (WPG) of the wood specimen in the range of 19–25% were obtained due to these procedures. SEM investigations show that precursor solutions penetrate into the whole wood body and the titania formed after heat treatment in the composites is deposited in the pores (lumen) and partly in the cell walls of the wooden matrix. The moisture sorption was investigated in long term tests for a period of some months by storage at 20–23 °C in humid air (relative humidity of 99%) and ambient atmosphere (relative humidity 40–60%), respectively. For untreated reference samples the moisture sorption results in increasing of mass and volume according to saturation values of 24 and 13%, respectively, after about 15 days. The incorporation of titania reduces the saturation values of the moisture sorption by up to 12% in mass and by up to 5% in volume at a relative humidity of 99%. Thus, an enhancement of the dimensional stability of about 60% is obtained at best. The results demonstrate that modification of wood with sol–gel derived precursors can enhance its dimensional stability, which prevents the formation of cracks. Because of that reduced moisture sorption biological attacks should be delimited. Additionally, thermal analyses show a retarded combustion of the wood matrix due to titania infiltration.     

Preparation and characterization of TiO<Subscript>2</Subscript> sol–gel modified nanocomposite films

In this study, the role of TiO₂ MT-150A loading in the polymeric sol was investigated for the synthesis of immobilized TiO₂ nanocomposite films on glass substrate using the MT-150A nanoparticles-modified sol–gel method. The nanocomposite film properties were examined using different material characterization techniques including X-ray diffraction, X-ray photoelectron spectroscopy, field emission scanning electron microscopy, UV–Vis spectrophotometer, Scotch tape test and pencil hardness test. The hydrophilicity of films during UV/Vis irradiation and storage in a dark place were evaluated by a contact angle analyzer. The MT-150A loading had a significant effect on the amount of crystallite phases in the films. However, increasing the MT-150A loading in the sol resulted in an increase in rutile phase content. In addition, increasing MT-150A loading in the sol yielded films with higher hydrophilicity but a concentration of 10–30 g/L MT-150A in the sol was found as the maximum for obtaining films with good adherence on the glass substrate.     

Sol–gel preparation of ZrC–ZrO<Subscript>2</Subscript> composite microspheres using fructose as a carbon source

ZrC–ZrO₂ composite ceramic microspheres were prepared by internal gelation combined with carbothermic reduction using fructose as a chelating agent and carbon source. Fructose in the precursor solution formed complex with zirconium ions, which was conducive to the refining of the microstructure of the sintered composite. ZrC–ZrO₂ composite with ZrC content as high as 60?wt% could be prepared.

Open image in new window

In this paper, fructose was used as a chelating agent and an organic carbon source to prepare ZrCO microspheres by internal gelation and carbothermic reduction. The fructose in the precursor solution could form complex with zirconium ions, which was conducive to the refining of the microstructure of the sintered composite. ZrC–ZrO₂ composite with crystal size of ZrO₂ and ZrC in nanometer range and ZrC content as high as 60?wt% could be successfully prepared.

     

Electrophoretic sol–gel synthesis of SrBi<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>9</Subscript> nanowires

We report the independent invention of perovskite ferroelectric nanowires strontium bismuth tantalate (SrBi₂Ta₂O₉, SBT). Electrophoretic sol–gel techniques have been used successfully. The morphology and structures are analyzed via SEM, TEM and XRD. SBT nanowires and nanoparticles filled template revealed 30 and 40 μm long, respectively. SBT are proved to be a single phase of orthorhombic perovskite structure. As it indicated, SBT nanowires has been crystallized at 700 °C. To minimize surface polarity, SBT nanowires oriented preferentially along the growing axis (c axis) by translation and rotation of atomic clusters of SBT.     

Sol–gel immobilization of SiO<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> on hydrophobic clay and its removal of methyl orange from water

In this study, SiO₂/TiO₂–organoclay hybrids with high adsorption capability and high photocatalytic activity were synthesized by immobilizing mixed silica and titanium dioxide nanoparticles on organically modified clay via a hydrothermal sol–gel method. Addition of negatively charged silica particles enhanced the uniform dispersion of titanium dioxide nanoparticles on organoclay layers by decreasing the system tension, which resulted in high photocatalytic activity of SiO₂/TiO₂–organoclay hybrids. The high adsorption capability endowed by organically modified clay enriched the organic compounds around the photoactive sites, and thus greatly improved the photodegradation efficiency. Combining the high adsorption capability of organoclay with the high photocatalytic activity of TiO₂ nanoparticles, SiO₂/TiO₂–organoclay hybrids were promising and cost-effective photocatalysts in removal of pollutants from wastewater.     

Synthesis and characterization of sol–gel derived bioactive CaO–SiO<Subscript>2</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses containing magnetic nanoparticles

Magnetic bioglasses in the system CaO–SiO₂–P₂O₅ were prepared by interaction of acetic acid vapors with iron nitrate dispersed on the surface of sol–gel derived porous silicate network. Upon pyrolysis, the created iron acetate species transform into magnetic iron oxide nanoparticles. X-ray diffraction (XRD), FT-infrared (FT-IR) spectroscopy and surface area measurements (BET) were employed to monitor the evolution of glass structural features during the synthetic pathway as well as the structure and the texture of the resultant glasses. XRD, Raman spectroscopy and vibration magnetic measurements (VSM) revealed the features of magnetic phases, developed in the form of γ-Fe₂O₃ and magnetite. The obtained glasses exhibit in vitro bioactivity, expressed by spontaneous formation of hydroxyapatite on their surface after immersion in SBF at 37 °C, confirmed with μ-Raman and FT-IR spectroscopies.     

Sol–gel synthesis of iron yttrium garnet Y<Subscript>3</Subscript>Fe<Subscript>5</Subscript>O<Subscript>12</Subscript> using metal acetylacetonates

The synthesis of hydrolytically active heteroligand complexes of the composition [M(O₂C₅H₇)x(ⁱOC₅H₁₁)_y] (M = Fe³⁺ and Y³⁺) using iron and yttrium acetylacetonates was studied. Their reactivity was shown to be dependent on the degree of shielding of iron and yttrium cations in hydrolysis and polycondensation during the formation of a connected dispersion system. The crystallization temperature of iron yttrium garnet Y₃Fe₅O₁₂ upon heating xerogel was determined. It was found that the dispersity, microstructure, and magnetic characteristics of the products depend on the synthesis conditions.     

Preparation and characterization of SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–Na<Subscript>2</Subscript>O glass coated cBN abrasive particles via sol–gel route

SiO₂–Al₂O₃–Na₂O glass coated cubic boron nitride (cBN) abrasive particles were prepared by sol–gel technique. The results indicated that SiO₂–Al₂O₃–Na₂O glass was excellent material for oxidation protection of cBN abrasive grains because coefficient of thermal expansion of this glass closely matched that of cBN materials. The single particle compressive strength and impact toughness of this glass coated cBN abrasive particles were significantly increased. For the application of glass coated cBN abrasives to vitrified grinding wheels, it was evident that the glass coating provided high bonding strength between cBN abrasive grains and vitrified bond system.     

Preparation and characterization of Ba<Subscript>2</Subscript>Co<Subscript>2</Subscript>Fe<Subscript>12</Subscript>O<Subscript>22</Subscript> ferrite via glucose sol–gel method

Ba₂Co₂Fe₁₂O₂₂ (Co₂Y) was synthesized by sol–gel method using glucose as chelating agent. X-Ray diffraction studies indicate that sintering temperature as low as 950 °C is sufficient to produce Co₂Y ferrites. Co₂Y ferrites calcined at 1,000 °C exhibit good magnetic prosperities in high frequency, with the resonance frequency up to 11 GHz and intrinsic permeability about 5 even at 6 GHz. The heat-treated temperature dependence of coercivity, initial permeability and resonance frequency is close related to the particle shape and size.     

Sol–gel synthesis and characterization of titania monolith with bimodal porosity

Monolithic titania materials with macro-mesoporosity bimodal texture have been prepared through a template-free sol–gel approach, based on the reaction of hydrolysis and polycondensation of titanium isopropoxide promoted by the slow released water from esterification between acetic acid and methanol under a strong acidic condition. With the coarsening of the titania oligomers, phase separation and sol–gel transition processes take place so as to form a homogeneous gel system that will change into a monolith after aging, drying and heat treatment. The synthesized titania monolith possesses a specific surface area of 77 m² g⁻¹ (calcined at 350 °C), an anatase with partly rutile crystallite structure and great mechanical strength. The synthesis method applied here is simple and easy to implement as no extra chemical modifier such as poly(ethylene oxide) (PEO) and formamide is needed to control the process. The properties of biomodal porous structure, satisfactory surface area and high mechanical strength will enable the monolith to be served as a chromatography column to separate phosphorus organo-compounds.     

Sol–gel preparation and characterization of Ag and Mg co-doped nano TiO<Subscript>2</Subscript>: efficient photocatalytic degradation of C.I. Acid Red 27

In this study, we successfully prepared pure, mono-doped, and Ag, Mg co-doped TiO₂ nanoparticles using the sol–gel method, with titanium tetraisopropoxide as the Ti source. The prepared samples were characterized by X-ray powder diffraction (XRD), specific surface area and porosity (BET and BJH) measurement, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, photoluminescence, and energy dispersive X-ray spectroscopy techniques. The XRD data showed that the prepared nanoparticles had the same crystals structures as the pure TiO₂. Also, DRS results indicated that the band gap of co-doped photocatalyst was smaller than that of the monometallic and undoped TiO₂ and that there was a shift in the absorption band towards the visible light region. Furthermore, the photocatalytic activity of the prepared catalysts was evaluated by the degradation of C.I. Acid Red 27 in aqueous solution under visible light irradiation. The results showed that Ag (0.08 mol%), Mg (0.2 mol%) co-doped TiO₂ had the highest photoactivity among all samples under visible light. It was concluded that co-doping of the Ag and Mg can significantly improve the photocatalytic activity of the prepared photocatalysts, due to the efficient inhibition of the recombination of photogenerated electron–hole pairs. The optimum calcination temperature and time were 450 °C and 3 h, respectively.