Tribo-corrosion behavior of Zn-Ni-Cu and Zn-Ni-Cu-TiB2 coated mild steel

In this investigation , Zn-Ni-Cu and Zn-Ni-Cu-TiB₂ were coated on a mild steel specimen using a high velocity oxy fuel thermal spray (HVOF) process. The surface morphology and coated powder distribution of coated specimens were characterized using scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), and X-ray-Elemental mapping. The pin-on-disc (ASTM G99-17) method was used to examine the wear resistance of the coated and uncoated mild steel specimens. Both coated Zn-Ni-Cu and Zn-Ni-Cu-TiB2 on mild steel saw reduced wear volume loss than uncoated mild steel. The coated samples of Zn-Ni-Cu and Zn-Ni-Cu-TiB2 on Mild Steel were put through a scratch test to determine the adhesion strength of the coating with the substrate. The adhesion strength of coated Zn-Ni-Cu and Zn-Ni-Cu TiB2 mild steel was higher than that of untreated mild steel, indicating a solid link between the coating and substrate and minimal delamination. Using the Vickers hardness test to measure the hardness caused by the coating, it was shown that coated samples of Zn-Ni-Cu and Zn-Ni-Cu-TiB2 coated mild steel had significantly higher hardness than uncoated mild steel. Using ASTM G1-03 and ASTM G-31 standards, a 0.2 M HCl immersion cycle test was conducted for 28 days to test the corrosion resistance of coatings in an acidic media (672Hrs). When compared to Zn-Ni-Cu and Zn-Ni-Cu-TiB2 coated mild steel, the weight loss for the uncoated mild steel was significantly larger. Additionally, XRD examination showed that coated samples had less rust on their surface than uncoated samples. Both Zn-Ni-Cu and Zn-Ni-Cu-TiB2 on Mild Steel were anti-corrosive, as evidenced by increased corrosion potential and reduced corrosion current density when compared to uncoated mild steel, according to electrochemical impedance spectroscopy (EIS)/Tafel study in 0.2 MHCl. The outcomes of each test were very encouraging and demonstrated the durability of these coatings against wear and corrosion.     

低碳钢基体中离子注入镍和钼的电催化活性

离子注入不受相律和化学平衡的限制,也不受离子源和基体种类的约束,注入离子的能量和剂量精确可控,因而它是实现材料表面改性最有效的方法之一.自Grenness等发现注铂的钨电极,对H~+还原的电催化性能与纯铂接近之后,Wolf等将注入的Pt/RuO_2、Pt/C、Pt/WC电极用于H~+、O_2的电化学还原及甲酸的电化学氧化,其催化活性和稳定性均优于光滑的纯铂电极、Thompson等在钛基上注铂,用于催化析氢也得到类似的效果。近期文献报导,用热处理或电沉积方法制备的Ni-Mo、Ni-Mo-V 合金电极有很低的析氢超     

A facile synthesis of aryl iodides via potassium aryltrifluoroborates

Aryl- and heteroaryltrifluoroborates are rapidly converted to aryl and heteroaryl iodides under mild conditions using sodium iodide in the presence of mild oxidizing agents.     

Anilinium 5-sulfosalicylate electropolymerization on mild steel from an aqueous solution of sodium 5-sulfosalicylate/disodium 5-sulfosalicylate

Aniline is electropolymerized on bare and chemically pretreated mild steel from an aqueous solution of 0.10 M anilinium 5-sulfosalicylate in 0.20 M sodium 5-sulfosalicylate/0.20 M disodium 5-sulfosalicylate buffer as the supporting electrolyte, at room temperature. At constant anodic potential black poly(anilinium 5-sulfosalicylate) (PANISSA) films are obtained on bare mild steel and characterized by IR spectroscopy, electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM). IR spectroscopic analysis confirms typical polyaniline structure with 1,4-disubstituted aromatic nuclei and incorporation of sulfosalicylate anions as dopants. Adhesion of PANISSA films is significantly improved when the mild steel electrode surface is chemically pretreated by 0.10 M ammonium peroxydisulfate aqueous solution. The IR spectra of the films obtained on chemically pretreated mild steel surface indicate an interaction between PANISSA and products of the mild steel oxidation by peroxydisulfate. The SEM images show differences in morphology between PANISSA films synthesized on bare and chemically pretreated mild steel surface. The efficient anticorrosion behavior of adherent PANISSA film on chemically pretreated mild steel is proved by EIS. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 12, pp. 1497–1504. Based on the report delivered at the 8th International Frumkin Symposium “Kinetics of the Electrode Processes.” October 18–22, 2005, Moscow. The text was submitted by the authors in English.     

煤温和气化特性的热重研究

用程序升温热重法对煤温和气化特性及反应动力学进行了研究。结果表明：ＣａＯ对煤的裂解具有明显的催化作用。在煤温和气化过程中，减小粒径、提高升温速率有利于煤的裂解反应。煤温和气化反应可分为两段，ＣａＯ的加入明显降低了低温区反应的活化能。低温区与高温区的表观活化能与指前因子呈现良好的线性关系     

ZrCl4 mediated cyclization between epoxides and homopropargylic alcohols: synthesis of 4-chloro-5,6-dihydro-2H-pyran derivatives

Epoxides undergo cyclization with homopropargylic alcohols in the presence of zirconium tetrachloride under mild conditions to afford the corresponding dihydropyran derivatives in excellent yields under mild conditions.     

Synthesis of acetylenes via dehydrobromination using solid anhydrous potassium phosphate as the base under phase-transfer conditions

Phase-transfer catalyzed preparation of acetylenes from the corresponding vicinal dibromo compounds via double dehydrobromination using the mild solid base, anhydrous potassium phosphate, under very mild conditions is reported.     

The effect of some triazole derivatives as inhibitors for the corrosion of mild steel in 5 % hydrochloric acid

Corrosion inhibition by triazole derivatives (n-MMT) on mild steel in 5 % hydrochloric acid (HCl) solutions has been investigated by weight loss and electrochemical methods. The results obtained revealed that these compounds performed excellently as corrosion inhibitors for mild steel in HCl solution. Potentiodynamic polarization studies showed that they suppressed both the anodic and cathodic processes and inhibited the corrosion of mild steel by blocking the active site of the metal. The effect of temperature on the corrosion behavior of mild steel in 5 % HCl with the addition of different concentrations of the inhibitors was studied in the temperature range from 303 to 333 K. The associated activation corrosion and free adsorption energies were determined. The adsorption of these compounds on the mild steel surface obeys the Langmuir adsorption isotherm. The effect of molecular structure on the inhibition efficiency has been investigated by quantum chemical calculations. The electronic properties of inhibitors were calculated and are discussed.     

温和条件下丁二酰亚胺-N-磺酸催化合成双吲哚甲烷和香豆素衍生物(英文)

A mild and simple procedure is described for the synthesis of bis(indolyl)methane and coumarin derivatives using succinimide-N-sulfonic acid as an efficient,cheap,and reusable catalyst under mild conditions.     

Trichloroisocyanuric acid: an efficient reagent for the synthesis of dialkyl chlorophosphates from dialkyl phosphites

A mild and operationally simple method for the synthesis of dialkyl chlorophosphates is described. Trichloroisocyanuric acid is used as an effective reagent for the rapid conversion of dialkyl phosphites to their corresponding dialkyl chlorophosphates under mild conditions.     

Radical phosphination of organic halides and alkyl imidazole-1-carbothioates

Taking advantage of a radical-based methodology, mild and chemoselective phosphination reactions of organic halide and alkyl imidazole-1-carbothioates have been developed. The mild reaction conditions allow labile functional groups to survive during the reaction.     

某些含氮杂环化合物对20^#钢的缓蚀作用研究

用失重法、交流阻抗和极化曲线法研究了1mol/L HCl溶液中吡啶、喹啉及其衍生物对20~#钢的缓蚀作用。根据吡啶和喹啉在20~#钢表面上的复盖度与浓度及温度的关系,探讨了它们在20~#钢上的吸附行为,并提出了吸附模式。结果表明,吡啶和喹啉的吸附遵循Flory-Huggins吸附等温式。文中还估算了吡啶和喹啉吸附的热力学参数。     

(Tosylimino)phenyl-λ3-iodane as a reagent for the synthesis of methyl carbamates via Hofmann rearrangement of aromatic and aliphatic carboxamides

A new, mild procedure for the Hofmann rearrangement of aromatic and aliphatic carboxamides using (tosylimino)phenyl-λ(3)-iodane, PhINTs, as a reagent is reported. Because of the mild reaction conditions, this method is particularly useful for the Hofmann rearrangement of substituted benzamides, which usually afford complex reaction mixtures with other hypervalent iodine oxidants. The mild reaction conditions and high selectivity in the reaction of carboxamides with PhINTs allow the isolation of the initially formed labile isocyanates or their subsequent conversion to stable carbamates by treatment with alcohols.     

Study on the Inhibition of Mild Steel Corrosion by Cationic Gemini Surfactant in 1 M HCl

The cationic gemini surfactant 1,2-bis(N-tetradecyl-N,N-dimethylammonium)ethane dibromide (14-2-14) was synthesized using a previously described method. The surfactant was characterized using ¹H NMR. The corrosion inhibition effect of 14-2-14 on mild steel in 1 M HCl at temperatures 30–60°C was studied using weight loss measurements, potentiodynamic polarization measurements and electrochemical impedance spectroscopy. Morphology of the corroded mild steel specimens was examined using scanning electron microscopy (SEM). The results of the studies show that gemini surfactant is an efficient inhibitor for mild steel corrosion in 1 M HCl; the maximum inhibition efficiency (IE) of 98.06% is observed at surfactant concentration of 100 ppm at 60°C. The %IE increases with the increasing inhibitor concentration and temperature. The adsorption of inhibitor on the mild steel surface obeys Langmuir adsorption isotherm. SEM studies confirmed smoother surface for inhibited mild steel specimen.     

Deacetylation of Thioacetate using Acetyl Chloride in Methanol

A highly efficient method for the deacetylation of thioacetate is reported under mild acidic conditions employing acetyl chloride in methanol. Some of the major advantages are mild conditions, high efficiency, high yields, and easy operations.     

Highly stereoselective synthesis of novel alpha-haloenamides via a mild and efficient hydrohalogenation of ynamides

A highly stereoselective preparation of novel chiral (E)-alpha-haloenamides under mild conditions utilizing magnesium halide salts is described. This unexpected mild and efficient hydrohalogenation reaction highlights another synthetic utility of ynamides. [reaction: see text]     

Acetylation and Formylation of Alcohols in the Presence of Silica Sulfuric Acid

Alcohols are converted to esters in a mild, clean, and efficient reaction with acetic and formic acids in the presence of silica sulfuric acid. All reactions were performed under mild and completely heterogeneous conditions in refluxing n-hexane.     

Application of BU4N+HSO4 − as an Ionic Liquid and Acid Catalyst for Thioacetalization of Aldehydes and Ketones

A variety of carbonyl containing compounds have been successfully reacted with 1,2-ethanedithiol in a thioacetylization reaction using tetrabutylammonium hydrogensulfate as a mild and efficient catalyst. Aldehydes and ketones react with good to excellent yields under mild conditions.     

An efficient method for the synthesis of dialkyl chlorophosphates from trialkyl phosphites using bis（trichloromethyl） carbonate

A mild and simple method for the synthesis of dialkyl chlorophosphates is described, bis（trichloromethyl） carbonate （BTC） is used as the effective reagent for the conversion of dialkyl phosphites to their corresponding dialkyl chlorophosphates under mild conditions.     

An Approach to Disulfide Synthesis Promoted by Sulfonyl Chloride in Sodium Bicarbonate Aqueous Media

A mild and efficient protocol for the synthesis of disulfides in aqueous media using mercaptans promoted by sulfonyl chloride is reported. This reaction offers the advantages of mild reaction conditions, short reaction time, high yields, and simple operation.