Enhanced efficiency of polyfluorene derivatives: Organic–inorganic hybrid polymer light‐emitting diodes

Two novel organic–inorganic hybrid polyfluorene derivatives, poly{(9,9′‐dioctyl‐2,7‐fluorene)‐co‐(9,9′‐di‐POSS‐2,7‐fluorene)‐co‐[2,5‐bis(octyloxy)‐1,4‐phenylene]} (PFDOPPOSS) and poly{(9,9′‐dioctyl‐2,7‐fluorene)‐co‐(9,9′‐di‐POSS‐2,7‐fluorene)‐co‐bithiophene} (PFT2POSS), were synthesized by the Pd‐catalyzed Suzuki reaction of polyhedral oligomeric silsesquioxane (POSS) appended fluorene, dioctyl phenylene, and bithiophene moieties. The synthesized polymers were characterized with ¹H NMR spectroscopy and elemental analysis. Photoluminescence (PL) studies showed that the incorporation of the POSS pendant into the polyfluorene derivatives significantly enhanced the fluorescence quantum yields of the polymer films, likely via a reduction in the degree of interchain interaction as well as keto formation. Additionally, the blue‐light‐emitting polyfluorene derivative PFDOPPOSS showed high thermal color stability in PL. Moreover, single‐layer light‐emitting diode devices of an indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate)/polymer/Ca/Al configuration fabricated with PFDOPPOSS and PFT2POSS showed much improved brightness, maximum luminescence intensity, and quantum efficiency in comparison with devices fabricated with the corresponding pristine polymers PFDOP and PFT2. In particular, the maximum external quantum efficiency of PFT2POSS was 0.13%, which was twice that of PFT2 (0.06%), and the maximum current efficiency of PFT2POSS was 0.38 cd/A, which again was twice that of PFT2 (0.19 cd/A). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2943–2954, 2006     

New host homopolymers containing pendant triphenylamine derivatives: Synthesis,optical, electrochemical properties and its blend with Ir(ppy)3 for green phosphorescent organic light‐emitting devices

Two vinyl homopolymers poly(N‐(4‐(4‐(4‐vinylbenzyloxy)styryl)phenyl)‐N‐phenylbenzenamine) (PVST ) and poly(4‐vinyltriphenylamine) (PTPA ) containing pendant hole‐transporting triphenylamine and 4‐oxystyryltriphenylamine groups, respectively, were synthesized by radical polymerization and employed as hosts for tris(2‐phenylpyridine) iridium [Ir(ppy)₃] phosphor. Structural influences of the hole‐transporting groups upon optoelectronic properties were investigated by photophysical, electrochemical, and electroluminescent methods. The polymers were readily soluble in common organic solvents and their weight‐average molecular weights (M_w) were 5.68 × 10⁴ and 1.90 × 10⁴, respectively. The emission spectra (both photoluminescence, PL and electroluminescent, EL) of the blends [PTPA with 4 wt % Ir(ppy)₃] showed dominant green emission (517 nm) attributed to Ir(ppy)₃ due to efficient energy transfer from PTPA to Ir(ppy)₃. The HOMO levels of PVST and PTPA, estimated from onset oxidation potentials in their cyclic voltammograms, were ?5.14 and ?5.36 eV, which are much higher than ?5.8 eV of the conventional poly(9‐vinylcarbazole) (PVK) host owing to high hole‐affinity of the triphenylamine groups. The optoelectronic performances of phosphorescent EL devices, using PVST and PTPA as hosts and Ir(ppy)₃ as dopant (indium tin oxide, ITO/poly(3,4‐ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS)/PVST or PTPA:Ir(ppy)₃(4 wt %):PBD(40 wt %)/BCP/Ca/Al), were investigated. The maximum luminance and luminance efficiency of the PTPA device were 9220 cd/m² and 6.1 cd/A, respectively, which were significantly improved relative to those of PVK and PVST. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7960–7971, 2008     

Organic-inorganic nanohybrids through the direct tailoring of semiconductor nanocrystals with conjugated polymers

Two main synthetic strategies are used to prepare conjugated oligomer- or polymer-nanocrystal nanohybrids. In the first strategy ligand exchange is invoked to either replace with a bifunctional ligand, which contains a second functional group for coupling with conjugated oligomers or polymers (COs or CPs), or exchange for the functionalized COs or CPs in a "grafting-onto" process. Alternatively, in the second strategy the nanocrystal (NC) is passivated with functional ligands from which COs or CPs are directly grown in the absence of ligand exchange. The well-defined interface between the COs or CPs and NCs facilitates an efficient charge-transfer between them.     

Light-emitting diodes with semiconductor nanocrystals

Colloidal semiconductor nanocrystals are promising luminophores for creating a new generation of electroluminescence devices. Research on semiconductor nanocrystal based light-emitting diodes (LEDs) has made remarkable advances in just one decade: the external quantum efficiency has improved by over two orders of magnitude and highly saturated color emission is now the norm. Although the device efficiencies are still more than an order of magnitude lower than those of the purely organic LEDs there are potential advantages associated with nanocrystal-based devices, such as a spectrally pure emission color, which will certainly merit future research. Further developments of nanocrystal-based LEDs will be improving material stability, understanding and controlling chemical and physical phenomena at the interfaces, and optimizing charge injection and charge transport.     

White‐Light Emission from a Single Polymer with Singlet and Triplet Chromophores on the Backbone

Summary: A strategy to generate an efficient white‐light emission has been developed by mixing fluorescence and phosphorescence emission from a single polymer. Fluorene is used as the blue‐emissive component, benzothiadiazole (BT) and the iridium complex [(btp)₂Ir(tmd)] are incorporated into a polyfluorene backbone, respectively, as green‐ and red‐emissive chromophores by Suzuki polycondensation. By changing the contents of BT and [(btp)₂Ir(tmd)] in the polymer, the electroluminescence spectrum from a single polymer can be adjusted to achieve white‐light emission. A white polymeric light‐emitting diode (WPLED) with a structure of ITO/PEDOT:PSS/PVK/PFIrR1G03/CsF/Al shows a maximum external quantum efficiency of 3.7% and the maximum luminous efficiency of 3.9 cd · A⁻¹ at the current density of 1.6 mA · cm⁻² with the CIE coordinates of (0.33, 0.34). The maximum luminance of 4 180 cd · m⁻² is achieved at the current density of 268 mA · cm⁻² with the CIE coordinates of (0.31, 0.32). The white‐light emissions from such polymers are stable in the white‐light region at all applied voltages, and the electroluminescence efficiencies decline slightly with the increasing current density, thus indicating that the approach of incorporating singlet and triplet species into the polymer backbone is promising for WPLEDs.

Structure of PFIrR1G04 and the EL spectra of its devices under various voltages. Device structure: ITO/PEDOT:PSS/PVK/polymer/CsF/Al.     

Nanosized vanadium, tungsten and molybdenum oxide clusters grown in porous chitosan microspheres as promising hybrid materials for selective alcohol oxidation

The ability of chitosan biopolymer to coordinate vanadium, tungsten and molybdenum metallic species and to control their mineralisation growth provides a new family of surface-reactive organic-inorganic hybrid microspheres. Drying the resulting materials under supercritical conditions allowed the gel network dispersion to be retained, thereby leading to a macroporous catalyst with surface areas ranging from 253 to 278 m(2) g(-1). On account of the open framework structure of these microspheres, the redox species entangled within the fibrillar network of the polysaccharide aerogels were found to be active, selective and reusable catalysts for cinamylalcohol oxidations.     

Microwave synthesis of hybrid inorganic-organic porous materials: phase-selective and rapid crystallization

Microwave synthesis of two porous nickel glutarates was compared with conventional hydrothermal synthesis. The cubic nickel glutarate, [Ni20(C5H6O4)20(H2O)8] x 40 H2O (1), was synthesized by conventional electrical heating in several hours or days, depending on synthesis temperature. Crystallization was greatly accelerated by microwave irradiation, in which more stable, tetragonal nickel glutarate, [Ni22(C5H6O4)20(OH)4(H2O)10] x 38 H2O (2), was formed within a few minutes, suggesting the efficiency of the microwave technique in the synthesis of porous hybrid materials. The cubic phase 1 is formed preferentially at low pH, low temperature, and especially under conventional electrical heating. In contrast, the tetragonal phase 2 is obtained favorably at high pH, high temperature, and especially with microwave irradiation. This work demonstrates that the microwave method provides not only the very fast synthesis of a hybrid material, but also the possibility to discover a new porous hybrid material not yet identified by conventional hydrothermal synthesis. The hydrothermal formation of metal-organic hybrid materials in a matter of minutes is an important step towards developing commercially viable routes for producing this valuable class of materials.     

Exceptional affinity of nanostructured organic-inorganic hybrid materials towards dioxygen: confinement effect of copper complexes

We report the exceptional reactivity towards dioxygen of a nanostructured organic-inorganic hybrid material due to the confinement of copper cyclam within a silica matrix. The key step is the metalation reaction of the ligand, which can occur before or after xerogel formation through the sol-gel process. The incorporation of a Cu(II) center into the material after xerogel formation leads to a bridged Cu(I)/Cu(II) mixed-valence dinuclear species. This complex exhibits a very high affinity towards dioxygen, attributable to auto-organization of the active species in the solid. The remarkable properties of these copper complexes in the silica matrix demonstrate a high cooperative effect for O(2) adsorption; this is induced by close confinement of the two copper ions leading to end-on mu-eta(1):eta(1)-peroxodicopper(II) complexes. The anisotropic packing of the tetraazamacrocycle in a lamellar structure induces an exceptional reactivity of these copper complexes. We show for the first time that the organic-inorganic environment of copper complexes in a silica matrix fully model the protecting role of protein in metalloenzymes. For the first time an oxygenated dicopper(II) complex can be isolated in a stable form at room temperature, and the reduced Cu(2) (I,I) species can be regenerated after several adsorption-desorption cycles. These data also demonstrate that the coordination scheme and reactivity of the copper cyclams within the solid are quite different from that observed in solution.     

Selective chemisorption of carbon monoxide by organic-inorganic hybrid materials incorporating cobalt(III) corroles as sensing components

Twenty-one hybrid materials incorporating cobalt(III) corrole complexes were synthesized by a sol-gel process or by grafting the metallocorrole onto a mesostructured silica of the SBA-15 type. All the materials show an almost infinite selectivity for carbon monoxide with respect to dinitrogen and dioxygen in the low-pressure domain where the chemisorption phenomenon is predominant. This peculiar property is of prime importance for an application as a CO sensor. The selectivity slightly decreases at high pressures where nonselective physisorption phenomena mainly occur. The percentage of active sites for CO chemisorption ranges from 22 to 64 %. This low percentage may be attributable to interactions between the cobalt(III) corroles with silanol or siloxane groups remaining at the surface of the materials which prevent further coordination of the CO molecule. Notably, the most efficient materials are those prepared in the presence of a protecting ligand (pyridine) during the gelation or the grafting process. The removal of this ligand after the gelation process releases a cavity around the cobalt ion that favors the coordination of a carbon monoxide molecule. The CO adsorption properties of the SBA-15 hybrid were not affected over a period of several months thus indicating a high stability of the material. Conversely, the xerogel capacities slowly decrease owing to the evolution of the material structure.     

Synthesis of new polyfluorene copolymers with a comonomer containing triphenylamine units and their applications in white‐light‐emitting diodes

Novel conjugated polyfluorene copolymers, poly[9,9‐dihexylfluorene‐2,7‐diyl‐co‐(2,5‐bis(4′‐diphenylaminostyryl)‐phenylene‐1,4‐diyl)]s (PGs), have been synthesized by nickel(0)‐mediated polymerization from 2,7‐dibromo‐9,9‐dihexylfluorene and 1,4′‐dibromo‐2,5‐bis(4‐diphenylaminostyryl)benzene with various molar ratios of the monomers. Because of the incorporation of triphenylamine (TPA) moieties, PGs exhibit much higher HOMO levels than the corresponding polyfluorene homopolymers and are able to facilitate hole injection into the polymer layer from the anode electrode in light‐emitting diodes. Conventional polymeric light‐emitting devices with the configuration ITO/PEDOT:PSS/polymer/Ca/Al have been fabricated. A light‐emitting device produced with one of the PG copolymers (PG10) as the emitting layer exhibited a voltage‐independent and stable bluish‐green emission with color coordinates of (0.22, 0.42) at 5 V. The maximum brightness and current efficiency of the PG10 device were 3370 cd/m² (at 9.6 V) and 0.6 cd/A, respectively. To realize a white polymeric light‐emitting diode, PG10 as the host material was blended with 1.0 wt % of a red‐light‐emitting polymer, poly[9,9‐dioctylfluorene‐2,7‐diyl‐alt‐2,5‐bis(2‐thienyl‐2‐cyanovinyl)‐1‐(2′‐ethylhexyloxy)‐4‐methoxybenzene‐5′,5′‐diyl] (PFR4‐S), and poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylenevinylene] (MEH‐PPV). The device based on PG10:PFR4‐S showed an almost perfect pure white electroluminescence emission, with Commission Internationale de l'Eclairage (CIE) coordinates of (0.33, 0.36) at 8 V; for the PG10:MEH‐PPV device, the CIE coordinates at this voltage were (0.30, 0.40) with a maximum brightness of 1930 cd/m². Moreover, the white‐light emission from the PG10:PFR4‐S device was stable even at different driving voltages and had CIE coordinates of (0.34, 0.36) at 6 V and (0.31, 0.35) at 10 V. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1199–1209, 2007