Iron-catalyzed enyne cross-coupling reaction

In the presence of 0.5-1 mol % of FeCl(3) with lithium bromide as a crucial additive, alkynyl Grignard reagents, prepared from the corresponding alkynes and methylmagnesium bromide, react with alkenyl bromides or triflates to give the corresponding conjugated enynes in high to excellent yields. The reaction shows wide applicability to various terminal alkynes and alkenyl electrophiles.     

Copper-catalyzed enantioselective conjugate addition of grignard reagents to acyclic enones

A highly enantioselective Cu-catalyzed addition of Grignard reagents to acyclic aliphatic enones is described. In the presence of 5 mol % of CuBr.SMe2 and 6 mol % of JosiPhos diphosphine aliphatic enones react with Grignard reagents to provide beta-substituted linear ketones with high yields, regio-, and enantioselectivities.     

Studies on Cu(I)-catalyzed synthesis of simple 3-substituted 1,2-allenes and optically active 2-substituted secondary 2,3-allenols

The sequential treatment of terminal alkynes or propargylic alcohols with n-BuLi and MOMCl afforded the corresponding propargylic methyl ethers, which would react with primary alkyl Grignard reagents under the catalysis of CuBr to afford 3-substituted 1,2-allenes or 2-substituted secondary 2,3-allenols, respectively. The reaction may be applied to the synthesis of optically active 2-substituted secondary 2,3-allenols with up to >99% ee without any protection to the free hydroxyl group in the starting 4-hydroxy-2-alkynyl methyl ethers.     

Synthesis of 5S-(1-Oxoalkyl and Aryl)-2-pyrrolidinone Derivatives1

N-Benzyl pyroglutamate esters react with aryllithium reagents and methyllithium to give moderate to good yields of 5-(1-oxoaryl) or 5-(1-oxoalkyl)-2-pyrrolidinone derivatives. The reaction proceeds without racemization, but is accompanied by formation of 5-(1-hydroxy-1-alkyl)-2-pyrrolidinone derivatives. This reaction gives very poor yields of ketone products with most other alkyl organolithium reagents such as n-butyllithium. Grignard reagents react to give primarily the alcohol.     

Synthesis of trans-Disubstituted Alkenes by Cobalt-Catalyzed Reductive Coupling of Terminal Alkynes with Activated Alkenes

A cobalt-catalyzed reductive coupling of terminal alkynes, RC?CH, with activated alkenes, R'CH?CH(2) , in the presence of zinc and water to give functionalized trans-disubstituted alkenes, RCH?CHCH(2) CH(2) R', is described. A variety of aromatic terminal alkynes underwent reductive coupling with activated alkenes including enones, acrylates, acrylonitrile, and vinyl sulfones in the presence of a CoCl(2) /P(OMe)(3) /Zn catalyst system to afford 1,2-trans-disubstituted alkenes with high regio- and stereoselectivity. Similarly, aliphatic terminal alkynes also efficiently participated in the coupling reaction with acrylates, enones, and vinyl sulfone, in the presence of the CoCl(2) /P(OPh)(3) /Zn system providing a mixture of 1,2-trans- and 1,1-disubstituted functionalized terminal alkene products in high yields. The scope of the reaction was also extended by the coupling of 1,3-enynes and acetylene gas with alkenes. Furthermore, a phosphine-free cobalt-catalyzed reductive coupling of terminal alkynes with enones, affording 1,2-trans-disubstituted alkenes as the major products in a high regioisomeric ratio, is demonstrated. In the reactions, less expensive and air-stable cobalt complexes, a mild reducing agent (Zn) and a simple hydrogen source (water) were used. A possible reaction mechanism involving a cobaltacyclopentene as the key intermediate is proposed.     

Preparation and reactions of 2-chloro-3,4-epoxy-1-butene: a convenient route to (Z)-3-chloroallylic alcohols

Epoxide 2 was prepared from 3,4-dichloro-1-butene (1) by epoxidation with m-CPBA and subsequent dehydrohalogenation of the intermediate dichloroepoxide with molten KOH, affording 2 in 64% overall yield (2 steps). Catalytic CuBr/SMe(2)-mediated S(N)2' addition of sp(2)- or sp(3)-hybridized Grignard reagents to 2-chloro-3,4-epoxy-1-butene (2) afforded (Z)-3-chloroallylic alcohols such as 3 in good yields and with high regio- and stereoselectivity.     

Ruthenium-catalyzed aromatization of enediynes via highly regioselective nucleophilic additions on a pi-alkyne functionality. A useful method for the synthesis of functionalized benzene derivatives

TpRu(PPh3)(CH3CN)2 PF6 (10 mol %) catalyst effected the nucleophilic addition of water, alcohols, aniline, acetylacetone, pyrroles, and dimethyl malonate to unfunctionalized enediynes under suitable conditions (100 degrees C, 12-24 h) and gave functionalized benzene products in good yields. In this novel cyclization, nucleophiles very regioselectively attack the internal C1' alkyne carbon of enediynes to give benzene derivatives as a single regioisomer. Experiments with methoxy substituents exclude the possible involvement of naphthyl cations as reaction intermediates in the cyclization of (o-ethynylphenyl) alkynes. Deuterium-labeling experiments indicate that the catalytically active species is ruthenium-pi-alkyne rather than ruthenium-vinylidene species. This hypothesis is further confirmed by the aromatization of o-(2'-iodoethynyl)phenyl alkynes with alcohols. We propose a nucleophilic addition/insertion mechanism for this nucleophilic aromatization on the basis of a series of experiments.     

Phenanthrene synthesis by iron-catalyzed [4+2] benzannulation between alkyne and biaryl or 2-alkenylphenyl Grignard reagent

The [4+2] benzannulation reaction of internal or terminal alkynes with 2-biaryl, 2-heteroarylphenyl, or 2-alkenylphenyl Grignard reagents in the presence of Fe(acac)(3), 4,4'-di-tert-butyl-2,2'-bipyridyl, and 1,2-dichloro-2-methylpropane takes place at room temperature in 1 h to give 9-substituted or 9,10-disubstituted phenanthrenes and congeners in moderate to excellent yields. The reaction tolerates sensitive functional groups such as bromide and olefin. When applied to a 1,3-diyne, the annulation reaction takes place on both acetylenic moieties to give a bisphenanthrene derivative.     

2-Deuterio-1,3-benzodithiolium perchlorate: A useful synthon for the preparation of aldehydes-1-d

2-Deuterio-1,3-benzodithiolium perchlorate reacted with Grignard reagents to give 2-alkyl or 2-aryl-2-deuterio-1,3-benzodithioles, which in turn could be hydrolysed to corresponding aldehydes-1-d.     

Addition of Pt(PBu(t)(3)) groups to Ru(5)(CO)(12)(eta(6)-C(6)H(6))(mu(5)-C). Synthesis, structures, and dynamical activity

The reaction of Ru(5)(CO)(12)(eta(6)-C(6)H(6))(mu(5)-C), 7, with Pt(PBu(t)(3))(2) yielded two products Ru(5)(CO)(12)(eta(6)-C(6)H(6))(mu(6)-C)[Pt(PBu(t)(3))], 8, and Ru(5)(CO)(12)(eta(6)-C(6)H(6))(mu(6)-C)[Pt(PBu(t)(3))](2), 9. Compound 8 contains a Ru(5)Pt metal core in an open octahedral structure. In solution, 8 exists as a mixture of two isomers that interconvert rapidly on the NMR time scale at 20 degrees C, DeltaH() = 7.1(1) kcal mol(-1), DeltaS() = -5.1(6) cal mol(-)(1) K(-)(1), and DeltaG(298)(#) = 8.6(3) kcal mol(-1). Compound 9 is structurally similar to 8, but has an additional Pt(PBu(t)(3)) group bridging an Ru-Ru edge of the cluster. The two Pt(PBu(t)(3)) groups in 9 rapidly exchange on the NMR time scale at 70 degrees C, DeltaH(#) = 9.2(3) kcal mol(-)(1), DeltaS(#) = -5(1) cal mol(-)(1) K(-)(1), and DeltaG(298)(#) = 10.7(7) kcal mol(-1). Compound 8 reacts with hydrogen to give the dihydrido complex Ru(5)(CO)(11)(eta(6)-C(6)H(6))(mu(6)-C)[Pt(PBu(t)(3))](mu-H)(2), 10, in 59% yield. This compound consists of a closed Ru(5)Pt octahedron with two hydride ligands bridging two of the four Pt-Ru bonds.     

Synthesis of N,N‐Dimethylamines via Barbier–Grignard‐Type Electrophilic Amination

Aryl Grignard reagents react with N,N‐dimethyl O‐(mesitylenesulfonyl)hydroxylamine in THF under Barbier conditions at room temperature and give N,N‐dimethylanilines with high yields in a 2‐h reaction. The amination yield of in situ Grignard reagents were not lower than those of preformed aryl Grignard reagents. In situ cycloalkyl‐, allyl‐, and benzylmagnesium bromides did not react with N,N‐dimethyl O‐(mesitylenesulfonyl)hydroxylamine, except that amination of in situ n‐hexylmagnesium bromide resulted in a medium yield. Grignard–Barbier‐type amination of aryl bromides with N,N‐dimethyl O‐(mesitylenesulfonyl)hydroxylamine provides a new alternative route for the synthesis of N,N‐dimethylanilines.     

Study of the addition of Grignard reagents to 2-aryl-3H-indol-3-ones

Grignard reagents are added to the carbonyl group of 2-aryl-3H-indol-3-ones to generate 3-alkyl(or phenyl)-2-aryl-3H-indol-3-ols, which are in turn rearranged to yield 2-alkyl(or phenyl)-2-aryl-1,2-dihydro-3H-indol-3-ones.     

Ligand exchange reactions of aryl pyridyl sulfoxides with grignard reagents: Convenient preparation of 3- and 4-pyridyl grignard reagents and examination of the leaving abilities of pyridyl anions

Aryl 3- and 4-pyridyl sulfoxides undergo ligand exchange in reactions with aryl Grignard reagents to generate 3- and 4-pyridyl Grignard reagents, which, upon treatment with aldehydes or ketones, give the corresponding addition products in moderate-to-good yields. The mechanism for the exchange reaction was investigated by treating optically active 3- and 4-pyridyl p-tolyl sulfoxides with a phenyl Grignard reagent. Inversion of the configuration of the sulfur atom was the stereochemical result of the reactions. In the reactions of phenyl 2-pyridyl sulfoxide with Grignard reagents, the leaving ability of the 2-pyridyl group competes with that of the phenyl group. Both the experimental and MO calculated enthalpy values for deprotonation of α-, β-, and γ-protons of pyridine in the gas phase [1] are in accordance with the following order of the leaving abilities of aryl and pyridyl Grignard reagents: 4-PyMgBr > 3-PyMgBr » PhMgBr > p-TolMgBr > 2-PyMgBr.     

Action d'organolithiens sur la méthyl-2 quinoxaline. Etude de la réactivité des adduits

The action of organolithium reagents such as phenyllithium or n-bulyllithium on 2-methylquinoxaline gave lithiation of the methyl group which upon reaction with electtropholesphiles produce side chain alkenyl derivatives. On the other hand organolithium reagents react with the quinoxaline azomethine bond to give I-lithio-2-alkyl)or ary-1)-3 methylquinoxalines which can be further loithiated on the methyl group to give 2-alkyl(or aryl)-3-alkenylquinoxaline derivatives. The adducts can be condensed with clectrophiles such as benzonitrile or methlyl benzoate but only methyl benzoate leads to N condensed derivatives. Furthermore substituted 1,2,3,4-terahydroqinoxalines are available via the above lithio intermediates.     

Mild iodine-magnesium exchange of iodoaromatics bearing a pyrimidine ring with isopropylmagnesium chloride

[reaction: see text] Iodoaromatics bearing a reactive pyrimidine ring underwent a clean iodine-magnesium exchange with isopropylmagnesium chloride in the presence of bis[2-(N,N-dimethylamino)ethyl] ether to provide the corresponding Grignard reagents. The presence of bis[2-(N,N-dimethylamino)ethyl] ether prevented reduction of the pyrimidine ring and addition by isopropylmagnesium chloride. As a result, the newly formed reactive Grignard reagents were allowed to react with electrophiles in a highly selective manner to afford adducts in excellent yields.     

Noncryogenic I/Br-Mg exchange of aromatic halides bearing sensitive functional groups using i-PrMgCl-bis[2-(N,N-dimethylamino)ethyl] ether complexes

[reaction: see text] Iodo- and bromoaromatics bearing sensitive carboxylic ester and cyano groups underwent a selective halide-magnesium exchange with isopropylmagnesium chloride at ambient temperature in the presence of bis[2-(N,N-dimethylamino)ethyl] ether to afford the corresponding Grignard reagents. The newly formed reactive Grignard reagents were allowed to react with electrophiles such as trimethylborate to afford arylboronic acids in good to excellent yields.     

Hydrodebromination of bromoarenes using Grignard reagents catalyzed by metal ions

The metal salts, FeCl^·₂4H₂O, FeCl₃, NiCl₂, CoCl₂, CuBr and some iron complexes were found to be efficient catalysts for hydrodebromination of bromoarenes under mild reaction conditions with two equivalents of Grignard reagents. Among them, the iron systems showed the best behavior regarding economic and environmental considerations. All the alkyl Grignard reagents (except CH₃MgCl) and p‐tolylMgBr were promising reductive reagents with the formation of their homo‐coupling products. Copyright © 2008 John Wiley & Sons, Ltd.     

Hydrosilylation of dienes by yttrium hydrido complexes containing a linked amido-cyclopentadienyl ligand

The dimeric hydrido complex [Y(L)(THF)(mu-H)](2)() containing the CH(2)SiMe(2)-linked amido-cyclopentadienyl ligand L = C(5)Me(4)CH(2)SiMe(2)NCMe(3)(2-) catalyzed the hydrosilylation of 1,5-hexadiene, 1,7-octadiene and vinylcyclohexene by PhSiH(3). As demonstrated for 1,7-octadiene, the product distribution of the hydrosilylation strongly depends on the molar ratio of the reagents. In the absence of PhSiH(3), the stoichiometric reaction of with 1,5-hexadiene gave the isolable crystalline cyclopentylmethyl complex [Y(L)[CH(2)CH(CH(2))(4)](THF)]. Internal olefins such as trans-stilbene and alkynes such as tert-butylacetylene were not hydrosilylated by. trans-Stilbene was inserted into the yttrium-hydride bond of to give the 1,2-diphenylethyl complex [Y(L)[CH(CH(2)Ph)Ph](THF)]. tert-Butylacetylene reacted with to give the dimeric acetylide [Y(L)(C[triple bond]CCMe(3))](2). In an attempt to detect the monomeric hydrido species as a DME adduct [Y(L)H(DME)], complex was reacted with DME to form the sparingly soluble, dimeric 2-methoxyethoxy complex [Y(L)(mu-OCH(2)CH(2)OMe-kappaO)](2) under C-O splitting.     

硅杂四元环化合物的合成和反应

硅杂四元环化合物在有机硅化学中是一类非常重要的小分子环系化合物, 广泛应用于有机化学、金属有机化学以及材料化学. 环上只含有一个硅原子的硅杂环丁烷可以通过γ-卤代丙基硅烷的Grignard反应、Si＝C键与烯烃的 [2＋2]环加成反应以及硅杂环丙烷的扩环反应合成, 环上只含有一个硅原子的硅杂环丁烯可以通过格氏试剂或锂试剂参与的Si—C键的关环反应、硅杂环丁烷的转化反应、硅卡宾对C—H键的插入反应、Si＝C键与炔烃的[2＋2]环加成反应以及二炔基硅烷的分子内成环反应等途径合成. 硅杂环丁烷和硅杂环丁烯由于存在环张力和具有一定的Lewis酸性, 能够通过扩环反应生成五元和六元含硅杂环化合物, 也能够通过开环反应生成不同结构的有机硅分子和聚合物, 抑或实现有机反应在温和条件下的转化.     

Regioselective arylation of 3-bromopyridine

The addition of aryl Grignard reagents to the 1-phenoxycarbonyl salt of 3-bromopyridine affords 2-aryl-5-bromo-1-phenoxycarbonyl-1,2-dihydropyridines and 4-aryl-3-bromo-1-phenoxycarbonyl-1,4-dihydropyridines. The crude dihydropyridines were aromatized with o-chloranil in refluxing toluene to give 4- and 6-aryl-3-bromopyridines. The regioselectivity of this two-step process, 6- vs. 4-substitution, was examined and found to be dependent upon the structure of the Grignard reagent. Unhindered aryl Grignard reagents, e.g., phenyl and 2-naphthyl, gave mainly 6-aryl-3-bromopyridines (49-52%) along with 9% of the 4-substituted isomer and less than 4% of the 2-aryl-3-bromopyridine. Hindered aryl Grignard reagents, e.g., o-tolyl and 1-naphthyl, are less regioselective. When a catalytic amount of cuprous iodide is present during the Grignard reaction, nearly exclusive 1,4-addition results. The crude 4-aryl-3-bromo-1,4-dihydropyridines were aromatized with p-chloranil to provide 4-aryl-3-bromopyridines in good yield and high isomeric purity. The sequential use of the cuprous iodide-catalyzed Grignard reaction and the “normal” Grignard reaction provided a regiospeci-fic synthesis of 3-bromo-6-(p-methoxyphenyl)-4-phenylpyridine from 3-bromopyridine.