Direct visualization of chirality in two dimensions

Surface science techniques have been used to investigate 2D chirality induced by molecular adsorption at the Cu(1 1 0) surface. Particular emphasis has been devoted to presenting molecular resolution scanning tunnelling microscope images which provide direct, real-space access to chiral behaviour at the nanoscale. The systems chosen demonstrate the gamut of chiral organization: conglomerates, racemates and solid solutions. They show the creation of chirality from achiral adsorbates, and the enantiospecific hosting of an intrinsic chiral guest. In short, chirality at surfaces manifests its full range of behaviours, and STM provides the means by which that behaviour can be captured.     

Understanding the role of ion interactions in soluble salt flotation with alkylammonium and alkylsulfate collectors

There is anecdotal evidence for the significant effects of salt ions on the flotation separation of minerals using process water of high salt content. Examples include flotation of soluble salt minerals such as potash, trona and borax in brine solutions using alkylammonium and alkylsulfate collectors such as dodecylamine hydrochloride and sodium dodecylsulfate. Although some of the effects are expected, some do not seem to be encompassed by classical theories of colloid science. Several experimental and modeling techniques for determining solution viscosity, surface tension, bubble-particle attachment time, contact angle, and molecular dynamics simulation have been used to provide further information on air–solution and solid–solution interfacial phenomena, especially with respect to the interfacial water structure due to the presence of dissolved ions. In addition atomic force microscopy, and sum frequency generation vibrational spectroscopy have been used to provide further information on surface states. These studies indicate that the ion specificity effect is the most significant factor influencing flotation in brine solutions.     

The evolution of model catalytic systems; studies of structure, bonding and dynamics from single crystal metal surfaces to nanoparticles, and from low pressure (<10(-3) Torr) to high pressure (>10(-3) Torr) to liquid interfaces

The material and pressure gap has been a long standing challenge in the field of heterogeneous catalysis and have transformed surface science and biointerfacial research. In heterogeneous catalysis, the material gap refers to the discontinuity between well-characterized model systems and industrially relevant catalysts. Single crystal metal surfaces have been useful model systems to elucidate the role of surface defects and the mobility of reaction intermediates in catalytic reactivity and selectivity. As nanoscience advances, we have developed nanoparticle catalysts with lithographic techniques and colloidal syntheses. Nanoparticle catalysts on oxide supports allow us to investigate several important ingredients of heterogeneous catalysis such as the metal-oxide interface and the influence of noble metal particle size and surface structure on catalytic selectivity. Monodispersed nanoparticle and nanowire arrays were fabricated for use as model catalysts by lithographic techniques. Platinum and rhodium nanoparticles in the 1-10 nm range were synthesized in colloidal solutions in the presence of polymer capping agents. The most catalytically active systems are employed at high pressure or at solid-liquid interfaces. In order to study the high pressure and liquid interfaces on the molecular level, experimental techniques with which we bridged the pressure gap in catalysis have been developed. These techniques include the ultrahigh vacuum system equipped with high pressure reaction cell, high pressure Sum Frequency Generation (SFG) vibration spectroscopy, High Pressure Scanning Tunneling Microscopy (HP-STM), and High Pressure X-ray Photoemission Spectroscopy (HP-XPS), and Quartz Crystal Microbalance (QCM). In this article, we overview the development of experimental techniques and evolution of the model systems for the research of heterogeneous catalysis and biointerfacial studies that can shed light on the long-standing issues of materials and pressure gaps.     

How Science Can Contribute to the Remedial Conservation of Cultural Heritage

Colloid science is contributing solutions to counteract the degradation of artifacts, favoring their transfer to future generations. Advanced materials such as nanoparticles, coatings, gels and microemulsions have been assessed in conservation, spanning from archeological sites to modern and contemporary art. We give an overview of the fundamental milestones and latest innovations in conservation science, targeting solutions and tools for remedial conservation based on green nanomaterials and hybrid systems. Future perspectives and outstanding challenges in this exciting field are then outlined.     

Solvent-controlled organization of self-assembled polymeric monolayers on gold: an easy approach for the construction of protein resistant surfaces

Protein resistant surfaces based on poly(ethylene glycol) (PEG) coatings are extensively applied in the fields of biosensors, tissue engineering, fundamental cell-surface interaction research, and drug delivery systems. The structural organization of the PEG film on the surface has a significant effect on the performance of the film to resist protein adsorption. In this paper, we report an approach using solvent to control the organization of the polymeric monolayer on gold. A water soluble copolymer with grafted PEG side chains and alkyl disulfide side chains was synthesized. A polymeric monolayer was fabricated on a gold surface from different solutions (water- and toluene-based) of the copolymer. The organization of the polymeric monolayers was characterized by means of ellipsometry, cyclic voltammetry, contact angle, X-ray photoelectron spectroscopy, and atomic force microscopy. It was proven that the structural organization of the polymeric monolayer on a gold surface could be controlled by the solvent. A polymeric monolayer with PEG enriched at the outer level is obtained when water is used as the solvent. Various types of proteins, including fibrinogen, albumin, and normal human serum, were used to test the protein resistance of the gold surfaces modified by the polymeric monolayers. The polymeric monolayer formed from a water solution of the copolymer showed excellent protein resistance. In addition, by using water as the solvent, patterning of the polymeric monolayer could easily be achieved through a combination of lift-off and self-assembly. We believe that the approach reported here provides an easy, fast, and efficient way to fabricate a robust protein resistant surface.     

The influence of ionic strength, nutrients and pH on bacterial adhesion to metals

Bacteria-metal interactions in aqueous solutions are important in biofilm formation, biofouling and biocorrosion problems in the natural environment and engineered systems. In this study, the adhesion forces of two anaerobes (Desulfovibrio desulfuricans and Desulfovibrio singaporenus) and an aerobe (Pseudomonas sp.) to stainless steel 316 in various aqueous systems were quantified using atomic force microscopy (AFM) with a cell probe. Results show that the nutrient and ionic strength of the solutions influence the bacteria-metal interactions. The bacteria-metal adhesion force was reduced in the presence of the nutrients in the solution, because a trace organic film was formed and thus decreased the metal surface wettability. Stronger ionic strength in the solution results in a larger bacteria-metal adhesion force, which is due to the stronger electrostatic attraction force between the positively charged metal surface and negatively charged bacterial surface. Solution pH also influences the interaction between the bacterial cells and the metal surface; the bacteria-metal adhesion force reached its highest value when the pH of the solution was near the isoelectric point of the bacteria, i.e. at the zero point charge. The adhesion forces at pH 9 were higher than at pH 7 due to the increase in the attraction between Fe ions and negative carboxylate groups.     

Proteins and polyelectrolytes: A charged relationship

We review the interaction of charged polymeric systems with proteins. In solutions of low ionic strength there are many examples of proteins attracted to polyelectrolytes even if both systems carry the same overall charge. This attractive interaction is widespread, having been observed for single polyelectrolyte chains as well as for polyelectrolytes grafted to surfaces (polyelectrolyte brushes) and charged polymeric networks. In all cases, adding salt weakens the interaction considerably. We discuss the suggestion that the attractive force at low salinity originates from the asymmetry of interaction between charged polymer segments and charged patches on the surface of the protein globule. This can be explained if the attractive force is mainly due to a counterion release force, i.e., the polyelectrolyte chains become the multivalent counterions for the patches of opposite charge localized on the surface of the proteins. We review a selection of simple models that lead to semi-quantitative estimates of this force as the function of salt concentration.     

Molecular dynamics simulations of aqueous ions at the liquid–vapor interface accelerated using graphics processors

Molecular dynamics (MD) simulations are a vital tool in chemical research, as they are able to provide an atomistic view of chemical systems and processes that is not obtainable through experiment. However, large‐scale MD simulations require access to multicore clusters or supercomputers that are not always available to all researchers. Recently, scientists have returned to exploring the power of graphics processing units (GPUs) for various applications, such as MD, enabled by the recent advances in hardware and integrated programming interfaces such as NVIDIA's CUDA platform. One area of particular interest within the context of chemical applications is that of aqueous interfaces, the salt solutions of which have found application as model systems for studying atmospheric process as well as physical behaviors such as the Hoffmeister effect. Here, we present results of GPU‐accelerated simulations of the liquid–vapor interface of aqueous sodium iodide solutions. Analysis of various properties, such as density and surface tension, demonstrates that our model is consistent with previous studies of similar systems. In particular, we find that the current combination of water and ion force fields coupled with the ability to simulate surfaces of differing area enabled by GPU hardware is able to reproduce the experimental trend of increasing salt solution surface tension relative to pure water. In terms of performance, our GPU implementation performs equivalent to CHARMM running on 21 CPUs. Finally, we address possible issues with the accuracy of MD simulaions caused by nonstandard single‐precision arithmetic implemented on current GPUs. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2011     

Novel two-dimensional "ring and chain" morphologies in Langmuir-Blodgett monolayers of PS-b-PEO block copolymers: effect of spreading solution concentration on self-assembly at the air-water interface

A polystyrene-b-poly(ethylene oxide) (PS-b-PEO) (MW = 141k, 11.4 wt% PEO) diblock copolymer in the hydrophobic regime was spread from chloroform solutions of various concentrations at the air-water interface, and the resultant monolayers were transferred to glass substrates and imaged using atomic force microscopy. Monolayers prepared under identical conditions were also characterized at the air-water interface via Langmuir compression isotherms. The effects of spreading solution concentration on surface features, compressibility, and limiting mean molecular area were determined, revealing several interesting trends that have not been reported for other systems of PS-b-PEO. Spreading solutions > or = 0.50 mg/mL resulted almost exclusively in dot and spaghetti morphologies, with no observed continent features, which have been commonly found in more hydrophobic systems. For lower spreading solutions, < or = 0.25 mg/mL, we observed a large predominance of two novel surface morphologies, nanoscale rings and chains. The surface pressure (pi)-area (A) isotherms also exhibited a unique dependence on the spreading solution concentration, with limiting mean molecular areas and isothermal compressibilities of PS-b-PEO monolayers increasing below a critical concentration of spreading solution, suggesting a greater contribution from the PEO blocks. These results suggest that PS chain entanglement prior to solvent evaporation plays an important kinetic role in the extent of PEO adsorption at the air-water interface and in the morphologies of the resulting self-assembled surface aggregates.     

Direct atomic force microscopy observation of DNA tile crystal growth at the single-molecule level

While the theoretical implications of models of DNA tile self-assembly have been extensively researched and such models have been used to design DNA tile systems for use in experiments, there has been little research testing the fundamental assumptions of those models. In this paper, we use direct observation of individual tile attachments and detachments of two DNA tile systems on a mica surface imaged with an atomic force microscope (AFM) to compile statistics of tile attachments and detachments. We show that these statistics fit the widely used kinetic Tile Assembly Model and demonstrate AFM movies as a viable technique for directly investigating DNA tile systems during growth rather than after assembly.     

Dilational surface visco-elasticity of polyelectrolyte/surfactant solutions: formation of heterogeneous adsorption layers

Recent application of the methods of surface dilational rheology to solutions of the complexes between synthetic polyelectrolytes and oppositely charged surfactants (PSC) gave a possibility to determine some steps of the adsorption layer formation and to discover an abrupt transition connected with the formation of microaggregates at the liquid surface. The kinetic dependencies of the dynamic surface elasticity are always monotonous at low surfactant concentrations but can have one or two local maxima in the range beyond the critical aggregation concentration. The first maximum is accompanied by the generation of higher harmonics of induced surface tension oscillations and caused by heterogeneities in the adsorption layer. The formation of a multilayered structure at the surface for some systems leads to the second maximum in the dynamic surface elasticity. The hydrophobicity and charge density of a polymer chain influence strongly the surface structure, resulting in a variety of dynamic surface properties of PSC solutions. Optical methods and atomic force microscopy give additional information for the systems under consideration. Experimental results and existing theoretical frameworks are reviewed with emphasis on the general features of all studied PSC systems.     

Molecular dynamics simulation studies of a complex fluid -solid interface - the benzene-alkane-graphite system

Interfaces between solid surfaces and solutions are of considerable scientific as well as technological interest, in particular in the context of the adsorption and the formation and organization of molecular films. The realistic modeling of such complex interfaces on the molecular scale is an important testing ground for simulation techniques. Here we focus on the benzene-alkane-graphite interface as an example of the above class of systems, including surface induced segregation, adsorption, and structural aspects of the graphite-solution interface.     

Microchemical Pen: An Open Microreactor for Region‐Selective Surface Modification

Various micro surface‐modification approaches including photolithography, dip‐pen lithography and ink‐jet systems have been developed and used to extend the functionalities of solid surfaces. While those approaches work in the “open space”, push–pull systems which work in solutions have recently drawn considerable attention. However, the confining flows performed by push–pull systems have realized only the dispense process, while microscale, region‐selective chemical reactions have remained unattainable. This study reports a microchemical pen that enables region‐selective chemical reactions for the micro surface modification/patterning. The chemical pen is based on the principle of microfluidic laminar flows and the resulting mixing of reagents by the mutual diffusion. The tiny diffusion layer performs as the working region. This report represents the first demonstration of an open microreactor in which two different reagents react on a real solid sample. The multifunctional characteristics of the microchemical pen are confirmed by different types of reactions in many research areas, including inorganic chemistry, polymer science, electrochemistry and biological sample treatment.     

Confinement-induced phase transition and hysteresis in colloidal forces for surfactant layers on hydrophobic surfaces

In this paper we consider surfactant solutions near a pair of interfaces. It is well-known that strong lateral interactions between surfactant molecules give rise to a step in the adsorption isotherm. In a self-consistent field theory, such a step in the adsorbed amount shows up as a van der Waals loop. The consequence of such a loop for surface force experiments is analyzed. From adsorption isotherms at fixed confinement we extract the relevant adsorbed amounts for a fixed chemical potential as a function of the confinement. A cusped structure is found for the relation between the interaction energy and the slit width: there is a confinement-induced first-order phase transition. The corresponding interaction curve has a kink at the binodal slit distance. Metastable branches as well as an unstable branch (bracketed by the two spinodal points) are presented. The metastability is expected to give rise to force hysteresis in, e.g., atomic force microscope or surface force apparatus experiments, distinctly different from those due to mechanical instabilities of the cantilever system.     

Influence of the aggregation state in solution on the supramolecular organization of adsorbed type I collagen layers

In the last years, adsorbed collagen was shown to form layers with a supramolecular organization depending on the substrate surface properties and on the preparation procedure. If the concentration of collagen and the duration of adsorption are sufficient, fibrillar collagen structures are formed, corresponding to assemblies of a few molecules. This occurs more readily on hydrophobic compared to hydrophilic surfaces. This study aims at understanding the origin of such fibrillar structures and in particular at determining whether they result from the deposition of fibrils formed in solution or from the building of assemblies at the interface. Therefore, type I collagen solutions with an increasing degree of aggregation were prepared, using the “neutral-start” approach, by ageing pH 5.8 solutions at 37 °C for 15 min, 2 or 7 days. The obtained solutions were used to investigate the influence of collagen aggregation in solution on the supramolecular organization of adsorbed collagen layers, which was characterized by X-ray photoelectron spectroscopy and atomic force microscopy. Polystyrene and plasma-oxidized polystyrene were chosen as substrates for the adsorption. The size and the density of collagen fibrils at the interface decreased upon increasing the degree of aggregation of collagen in solution. This is explained by a competitive adsorption process between monomers and aggregates of the solution, turning at the advantage of the monomers. More aggregated solutions, which are thus depleted in free monomers, behave like less concentrated solutions, i.e. lead to a lower adsorbed amount and less fibril formation at the interface. This study shows that the supramolecular fibrils observed in adsorbed collagen layers, especially on hydrophobic substrates, are not formed in the solution, prior to adsorption, but are built at the interface, through the assembly of free segments of adsorbed molecules.     

Analytical solution of Poisson–Boltzmann equation for interacting plates of arbitrary potentials and same sign

Efficient calculation of electrostatic interactions in colloidal systems is becoming more important with the advent of such probing techniques as atomic force microscopy. Such practice requires solving the nonlinear Poisson–Boltzmann equation (PBE). Unfortunately, explicit analytical solutions are available only for the weakly charged surfaces. Analysis of arbitrarily charged surfaces is possible only through cumbersome numerical computations. A compact analytical solution of the one-dimensional PBE is presented for two plates interacting in symmetrical electrolytes. The plates can have arbitrary surface potentials at infinite separation as long they have the same sign. Such a condition covers a majority of the colloidal systems encountered. The solution leads to a simple relationship which permits determination of surface potentials, surface charge densities, and electrostatic pressures as a function of plate separation H for different charging scenarios. An analytical expression is also presented for the potential profile between the plates for a given separation. Comparison of these potential profiles with those obtained by numerical analysis shows the validity of the proposed solution.     

Charge heterogeneity of surfaces: mapping and effects on surface forces

The DLVO theory treats the total interaction force between two surfaces in a liquid medium as an arithmetic sum of two components: Lifshitz–van der Waals and electric double layer forces. Despite the success of the DLVO model developed for homogeneous surfaces, a vast majority of surfaces of particles and materials in technological systems are of a heterogeneous nature with a mosaic structure composed of microscopic and sub-microscopic domains of different surface characteristics. In such systems, the heterogeneity of the surface can be more important than the average surface character. Attractions can be stronger, by orders of magnitude, than would be expected from the classical mean-field DLVO model when area-averaged surface charge or potential is employed. Heterogeneity also introduces anisotropy of interactions into colloidal systems, vastly ignored in the past. To detect surface heterogeneities, analytical tools which provide accurate and spatially resolved information about material surface chemistry and potential — particularly at microscopic and sub-microscopic resolutions — are needed.Atomic force microscopy (AFM) offers the opportunity to locally probe not only changes in material surface characteristic but also charges of heterogeneous surfaces through measurements of force–distance curves in electrolyte solutions. Both diffuse-layer charge densities and potentials can be calculated by fitting the experimental data with a DLVO theoretical model. The surface charge characteristics of the heterogeneous substrate as recorded by AFM allow the charge variation to be mapped. Based on the obtained information, computer modeling and simulation can be performed to study the interactions among an ensemble of heterogeneous particles and their collective motions. In this paper, the diffuse-layer charge mapping by the AFM technique is briefly reviewed, and a new Diffuse Interface Field Approach to colloid modeling and simulation is briefly discussed.     

Molecular Architecture and Function of Polymeric Oriented Systems: Models for the Study of Organization,Surface Recognition,and Dynamics of Biomembranes

The Part and the Whole. The principle of self-organization for the creation of functional units is not an invention of modern natural sciences. It was already a basic idea of the ancient philosophies in Asia and Europe: only the mutuality of the parts creates the whole and its ability to function. Translated into the language of chemistry this means: the self-organization of molecules leads to supramolecular systems and is responsible for their functions. Thermotropic and lyotropic liquid crystals are such functional units, formed by self-organization. As highly oriented systems, they exhibit new properties. The importance of lyotropic liquid crystals for the life sciences has been known for a long time. They are a prerequisite for the development of life and the ability of cells to function. In materials sciences this concept of function through organization led to the development of new liquid-crystalline materials. From the point of view of macromolecular chemistry, this review tries to combine these two different fields and especially hopes to stimulate their interaction and joint treatment. To exemplify this, the molecular architecture of polymeric organized systems will be discussed. Polymeric liquid crystals combine the ability to undergo spontaneous self-organization–typical of liquid-crystalline phases–with the polymer-specific property of stabilizing these ordered states. As new materials, polymeric liquid crystals have already been investigated intensively. As model systems for biomembranes as well as for the simulation of biomembrane processes, they so far have been little discussed. The intention of this review article is to show that polymer science is able to contribute to the simulation of cellular processes such as the stabilization of biomembranes, specific surface recognition, or even the “uncorking” of cells. Polymer science, having an old tradition as an inter-disciplinary field, can no longer restrict itself to common plastics. Attempts to reach new horizons have already begun. The borderland between liquid crystals and cells will certainly play an important role. Basic requirements to work in this frontier area between organic chemistry, membrane biology, life science, and materials science will be the delight in scientific adventures as well as the courage to go ahead. The most important prerequisite will be the willingness to cooperate with disciplines which so far have not really accepted each other. From this point of view, this review does not aim at giving defined answers. It wants instead to encourage the scientific venture: too often we cling to painfully acquired knowledge, fearing adventures.     

Bubble-solid interactions in water and electrolyte solutions

Surface forces between an air bubble and a flat mica surface immersed in aqueous electrolyte solutions have been investigated using a modified surface force apparatus. An analysis of the deformation of the air bubble with respect to the mutual position of the bubble and the mica surface, the capillary pressure, and the disjoining pressure allows the air-liquid surface electrical potential to be determined. The experiments show that a long-range, double-layer repulsion acts between the mica (which is negatively charged) and an air bubble in water and in various electrolyte solutions at low concentration, thereby indicating that the air bubble surface is negatively charged. However, there is clear evidence that charge regulation occurs at the air-water interface to maintain a constant surface potential, and as a result of this, the charge at this interface changes from negative to positive as the bubble approaches the mica surface. Because of the attraction that arises as a result of the charge reversal, a finite force is required to separate the bubble from the mica, though the mica remains wetted by the aqueous phase. At the low concentrations investigated, the potential on the gas-liquid interface is independent of the electrolyte type within experimental uncertainty.     

Spontaneous Formation of Microgroove Arrays on the Surface of p‐Type Porous Silicon Induced by a Turing Instability in Electrochemical Dissolution

Self‐organization plays an imperative role in recent materials science. Highly tunable, periodic structures based on dynamic self‐organization at micrometer scales have proven difficult to design, but are desired for the further development of micropatterning. In the present study, we report a microgroove array that spontaneously forms on a p‐type silicon surface during its electrodissolution. Our detailed experimental results suggest that the instability can be classified as Turing instability. The characteristic scale of the Turing‐type pattern is small compared to self‐organized patterns caused by the Turing instabilities reported so far. The mechanism for the miniaturization of self‐organized patterns is strongly related to the semiconducting property of silicon electrodes as well as the dynamics of their surface chemistry.