The mandelamide keto-enol system in aqueous solution. Generation of the enol by hydration of phenylcarbamoylcarbene

Flash photolysis of diazophenylacetamide in aqueous solution produced phenylcarbamoylcarbene, whose hydration generated a transient species that was identified as the enol isomer of mandelamide. This assignment is based on product identification and the shape of the rate profile for decay of the enol transient, through ketonization to its carbonyl isomer, as well as by the form of acid-base catalysis of and solvent isotope effects on the decay reaction. Rates of enolization of mandelamide were also determined, by monitoring hydrogen exchange at its benzylic position, and these, in combination with the ketonization rate measurements, gave the keto-enol equilibrium constant pK(E) = 15.88, the acidity constant of the enol ionizing as an oxygen acid, pQ(E)(a)= 8.40, and the acidity constant of the amide ionizing as a carbon acid pQ(K)(a)= 24.29. (These acidity constants are concentration quotients applicable at ionic strength = 0.10 M.) These results show the enol content and carbon acid strength of mandelamide, like those of mandelic acid and methyl mandelate, to be orders of magnitude less than those of simple aldehydes and ketones; this difference can be attributed to resonance stabilization of the keto isomers of mandelic acid and its ester and amide derivatives, through electron delocalization into their carbonyl groups from the oxygen and nitrogen substituents adjacent to these groups. The enol of mandelamide, on the other hand, again like the enols of mandelic acid and methyl mandelate, is a substantially stronger acid than the enols of simple aldehydes and ketones. This difference can be attributed to the electronegative nature of the oxygen and nitrogen substituents geminal to the enol hydroxyl group in the enols of mandelic acid and its derivatives; in support of this, the acidity constants of these enols correlate well with field substituent constants of these geminal groups.     

Gas-phase acidities of disubstituted methanes and of enols of carboxamides substituted by electron-withdrawing groups

The gas-phase acidities DeltaG degrees (acid) of some 20 amides/enols of amides RNHCOCHYY'/RNHC(OH)=CYY' [R = Ph, i-Pr; Y, Y' = CO(2)R', CO(2)R' ', or CN, CO(2)R', R', R' ' = Me, CH(2)CF(3), CH(CF(3))(2)], the N-Ph and N-Pr-i amides of Meldrum's acid, 1,3-cyclopentanedione, dimedone, and 1,3-indanedione, and some N-p-BrC(6)H(4) derivatives and of nine CH(2)YY' (Y, Y' = CN, CO(2)R', CO(2)R' '), including the cyclic carbon acids listed above, were determined by ICR. The acidities were calculated at the B3LYP/6-31+G//B3LYP/6-31+G level for both the enol and the amide species or for the carbon acid and the enol on the CO in the CH(2)YY' series. For 12 of the compounds, calculations were also conducted with the larger base sets 6-311+G and G-311+G. The DeltaG degrees (acid) values changed from 341.3 kcal/mol for CH(2)(CO(2)Me)(2) to 301.0 kcal/mol for PhNHC(OH)=C(CN)CH(CF(3))(2). The acidities increased for combinations of Y and Y' based on the order CO(2)Me < CO(2)CH(2)CF(3) < CN, CO(2)CH(CF(3))(2) for a single group and reflect the increased electron-withdrawal ability of Y,Y' coupled with the ability to achieve planarity of the crowded anion. The acidities of corresponding YY'-substituted systems follow the order N-Ph enols > N-Pr-i enols > CH(2)YY'. Better linear relationships between DeltaG degrees (acid) values calculated for the enols and the observed values than those for the values calculated for the amides suggest that the ionization site is the enolic O-H of most of the noncyclic trisubstituted methanes. The experimental DeltaG degrees (acid) value for Meldrum's acid matches the recently reported calculated value. The calculated structures and natural charges of all species are given, and the changes occurring in them on ionization are discussed. Correlations between the DeltaG degrees (acid) values and the pK(enol) values, which are linear for the trisubstituted methanes, excluding YY' = (CN)(2) and nonlinear for the CH(2)YY' systems, are discussed.     

UV/vis, 1H, and 13C NMR spectroscopic studies to determine mangiferin pKa values

The acid constants of mangiferin (a natural xanthonoid) in aqueous solution were determined through an UV/vis spectroscopic study employing the SQUAD program as a computational tool. A NMR study complements the pK(a) values assignment and evidences a H-bridge presence on 1-C. The chemical model used was consistent with the experimental data obtained. The pK(a) values determined with this procedure were as follows: H(4)(MGF)=H(3)(MGF)(-)+H(+), pKa1 (6-H)=6.52+/-0.06; H(3)(MGF)(-)=H(2)(MGF)(2-)+H(+), pKa2 (3-H)=7.97+/-0.06; H(2)(MGF)(2-)=H(MGF)(3-)+H(+), pKa3 (7-H)=9.44+/-0.04; H(MGF)(3-)=(MGF)(4-)+H(+), pKa4 (1-H)=12.10+/-0.01; where it has been considered mangiferin C(19)H(18)O(11) as H(4)(MGF). Mangiferin UV/vis spectral behavior, stability study in aqueous solution as well as NMR spectroscopy studies: one-dimensional (1)H,(13)C, 2D correlated (1)H/(13)C performed by (g)-HSQC and (g)-HMBC methods; are also presented. pK(a) values determination of H(4)(MGF) in aqueous solution is a necessary contribution to subsequent pharmacokinetic study, and a step towards the understanding of its biological effects.     

Increasing stability of the fullerenes with the number of carbon atoms: the experimental evidence

The values of the molar standard enthalpies of formation, Delta(f)H(o)(m)(C(76), cr) = (2705.6 +/- 37.7) kJ x mol(-1), Delta(f)H(o)(m)(C(78), cr) = (2766.5 +/- 36.7) kJ x mol(-1), and Delta(f)H(o)(m)(C(84), cr) = (2826.6 +/- 42.6) kJ x mol(-1), were determined from the energies of combustion, measured by microcombustion calorimetry on a high-purity sample of the D(2) isomer of fullerene C(76), as well as on a mixture of the two most abundant constitutional isomers of C(78) (C(2nu)-C(78) and D(3)-C(78)) and C(84) (D(2)-C(84), and D(2d)-C(84). These values, combined with the published data on the enthalpies of sublimation of each cluster, lead to the gas-phase enthalpies of formation, Delta(f)H(o)(m)(C(76), g) = (2911.6 +/- 37.9) kJ x mol(-1); Delta(f)H(o)(m)(C(78), g) = (2979.3 +/- 37.2) kJ x mol(-1), and Delta(f)H(o)(m)(C(84), (g)) = (3051.6 +/- 43.0) kJ x mol(-1), results that were found to compare well with those reported from density functional theory calculations. Values of enthalpies of atomization, strain energies, and the average C-C bond energy were also derived for each fullerene. A decreasing trend in the gas-phase enthalpy of formation and strain energy per carbon atom as the size of the cluster increases is found. This is the first experimental evidence that these fullerenes become more stable as they become larger. The derived experimental average C-C bond energy E(C-C) = 461.04 kJ x mol(-1) for fullerenes is close to the average bond energy E(C-C) = 462.8 kJ x mol(-1) for polycyclic aromatic hydrocarbons (PAHs).     

Stable enols of carboxylic esters. The poly(methoxycarbonyl)cyclopentadiene systems

The structures of the poly(methoxycarbonyl)cyclopentadienes C(5)H(6)(-)(n)()(CO(2)Me)(n)(), n = 5 (Cp-5), n = 4 (Cp-4), n = 3 (1, 2,4-; Cp-3) and n = 2 (1,2-; 1,2-Cp-2-I) were investigated. The X-ray diffractions of Cp-5 (known), Cp-4, and Cp-3 showed an enol of ester structure in the solid state. The enolic hydrogen forms a symmetrical hydrogen bond to a neighboring ester carbonyl, so that the vicinal "enolic" CO(2)Me groups in the 1, 2-C(=CO(2)Me)-C(CO(2)Me)(4) moiety are identical. The relevant X-ray parameters for the three enols are similar. The CP-MAS spectra of Cp-3-Cp-5 generally resemble their (13)C NMR spectra in CDCl(3) except for some differences of mostly <1 ppm. The (1)H, (13)C, and (17)O NMR spectra of Cp-3-Cp-5 in CDCl(3) are consistent with those of the hydrogen bonded enols. Most characteristic are the (1)H and (17)O signals of the OH groups at 19.7-20.1 and 221-225 ppm, respectively. Proton addition to sodium 1, 2-bis(methoxycarbonyl)cyclopentadienide gave a mixture of four 1, 2-bis(methoxycarbonyl)cyclopentadienes. The isomer (1,2-Cp-2-I) formed in 10-20% displays delta(O(1)H) at 19.3 ppm and is the enol analogue of Cp-5 whereas its main isomer (30-55%) (1,2-Cp-2-IV) has the ester structure. In CD(3)CN and DMSO-d(6) only one signal was observed at room temperature for each type of H, C, or O of Cp-5, suggesting a complete ionization to the symmetrical anion of Cp-5. In contrast, Cp-4 and Cp-3 in CD(3)CN at room temperature display OH signals in both (1)H and (17)O NMR spectra, and Cp-5 shows a broad OH signal in the (1)H spectrum at 240 K. The enol of ester structure is the main species, although exchange with the corresponding anion is possible. On standing in DMF-d(7) at room temperature, new signals are observed for Cp-3 and Cp-4. On raising the temperature in Cl(2)CDCDCl(2), Cp-3-Cp-5 show line broadening and appearance of new signals. These were ascribed to rearrangment and decomposition processes.     

Comparison of oxygen and sulfur effects on keto-enol chemistry in benzolactone systems: benzo[b]-2,3-dihydrofuran-2-one and -2-thione and benzo[b]-2,3-dihydrothiophene-2-one and -2-thione

Carbon-acid ionization constants, Q(K)(a)(concentration quotient at ionic strength = 0.10 M), were determined by spectrophotometric titration in aqueous solution for benzo[b]-2,3-dihydrofuran-2-one (3, pQ(K)(a) = 11.87), benzo[b]-2,3-dihydrothiophene-2-one (2, pQ(K)(a) = 8.85), and benzo[b]-2,3-dihydrofuran-2-thione (1, pQ(K)(a) = 2.81). Rates of approach to keto-enol equilibrium were also measured for the latter two substrates in perchloric acid, sodium hydroxide, and buffer solutions, and the rate profiles constructed from these data gave the ionization constants of the enols ionizing as oxygen or sulfur acids pQ(E)(a) = 5.23 for 2 and pQ(E)(a) = 2.69 for 1. Combination of these acidity constants with the carbon-acid ionization constants according to the relationship Q(K)(a)/Q(E)(a) = K(E) then gave the keto-enol equilibrium constants pK(E) = 3.62 for 2 and pK(E) = 0.12 for 1. The fourth, all-sulfur, member of this series, benzo[b]-2,3-dihydrothiophene-2-thione (4), proved to exist solely as the enol in aqueous solution, and only the enol ionization constant pQ(E)(a) = 3.44 could be determined for this substance; the limits pK(E) < 1.3 and pQ(K)(a) < 2.1, however, could be set. The unusually high acidities and enol contents of these substances are discussed, as are also the relative values of the ketonization and enolization rate constants measured; in the latter cases, Marcus rate theory is used to determine intrinsic kinetic reactivities, free of thermodynamic effects.     

Enols of amides activated by the 2,2,2-trichloroethoxycarbonyl group

Reaction of isocyanates XNCO (X = Ar, i-Pr, t-Bu) with CH(2)(Y)CO(2)CH(2)CCl(3) (Y = CO(2)Me, CO(2)CH(2)CCl(3), CN) gave 15 amides XNHCOCH(Y)CO(2)CH(2)CCl(3) (6) or enols of amides XNHC(OH)=C(Y)CO(2)CH(2)CCl(3) (5) systems. The amide/enol ratios in solution depend strongly on the substituent Y and the solvent and mildly on the substituent X. The percentage of enol for group Y increases according to Y = CN > CO(2)CH(2)CCl(3) > CO(2)Me and decreases with the solvent according to CCl(4) > C(6)D(6) > CDCl(3) > THF-d(8) > CD(3)CN > DMSO-d(6). With the most acidic systems (Y = CN) amide/enol exchange is observed in moderately polar solvents and ionization to the conjugate base is observed in DMSO-d(6). The solid-state structure of the compound with Y = CN, X = i-Pr was found to be that of the enol. The reasons for the stability of the enols were discussed in terms of polar and resonance effects. Intramolecular hydrogen bonds result in a very low delta(OH) and contribute to the stability of the enols and are responsible for the higher percentage of the E-isomers when Y = CO(2)Me and the Z-isomers when Y = CN. The differences in delta(OH), delta(NH), K(enol), and E/Z enol ratios from the analogues with CF(3) instead of CCl(3) are discussed.     

Fluoroaryl-substituted aminoalane dimers: syntheses and structures

Six dimeric aminoalanes of formula [Me(2)Al-mu-N(H)Ar(F)](2)(Ar(F)= 4-C(6)H(4)F (1), 2-C(6)H(4)F (2), 3,5-C(6)H(3)F(2)(3), 2,3,4,5-C(6)HF(4)(4), 2,3,5,6-C(6)HF(4)(5) and C(6)F(5)(6)) have been prepared by treatment of the appropriate fluoroaniline with AlMe(3) in toluene solution at 25 degrees C. The structures of 1-6 were determined by X-ray crystallography.     

Cationic diiron and diruthenium μ-allenyl complexes: synthesis, X-ray structures and cyclization reactions with ethyldiazoacetate/amine affording unprecedented butenolide- and furaniminium-substituted bridging carbene ligands

The novel cationic diiron μ-allenyl complexes [Fe(2)Cp(2)(CO)(2)(μ-CO){μ-η(1):η(2)(α,β)-C(α)(H)=C(β)=C(γ)(R)(2)}](+) (R = Me, 4a; R = Ph, 4b) have been obtained in good yields by a two-step reaction starting from [Fe(2)Cp(2)(CO)(4)]. The solid state structures of [4a][CF(3)SO(3)] and of the diruthenium analogues [Ru(2)Cp(2)(CO)(2)(μ-CO){μ-η(1):η(2)(α,β)-C(α)(H)=C(β)=C(γ)(R)(2)}][BPh(4)] (R = Me, [2a][BPh(4)]; R = Ph, [2c][BPh(4)]) have been ascertained by X-ray diffraction studies. The reactions of 2c and 4a with Br?nsted bases result in formation of the μ-allenylidene compound [Ru(2)Cp(2)(CO)(2)(μ-CO){μ-η(1):η(1)-C(α)=C(β)=C(γ)(Ph)(2)}] (5) and of the dimetallacyclopentenone [Fe(2)Cp(2)(CO)(μ-CO){μ-η(1):η(3)-C(α)(H)=C(β)(C(γ)(Me)CH(2))C(=O)}] (6), respectively. The nitrile adducts [Ru(2)Cp(2)(CO)(NCMe)(μ-CO){μ-η(1):η(2)-C(α)(H)=C(β)=C(γ)(R)(2)}](+) (R = Me, 7a; R = Ph, 7b), prepared by treatment of 2a,c with MeCN/Me(3)NO, react with N(2)CHCO(2)Et/NEt(3) at room temperature, affording the butenolide-substituted carbene complexes [Ru(2)Cp(2)(CO)(μ-CO){μ-η(1):η(3)-C(α)(H)[upper bond 1 start]C(β)C(γ)(R)(2)OC(=O)C[upper bond 1 end](H)] (R = Me, 10a; R = Ph, 10b). The intermediate cationic compound [Ru(2)Cp(2)(CO)(μ-CO){μ-η(1):η(3)-C(α)(H)[upper bond 1 start]C(β)C(γ)(Me)(2)OC(OEt)C[upper bond 1 end](H)](+) (9) has been detected in the course of the reaction leading to 10a. The addition of N(2)CHCO(2)Et/NHEt(2) to 7a gives the 2-furaniminium-carbene [Ru(2)Cp(2)(CO)(μ-CO){μ-η(1):η(3)-C(α)(H)[upper bond 1 start]C(β)C(γ)(Me)(2)OC(OEt)C[upper bond 1 end](H)](+) (11). The X-ray structures of 10a, 10b and [11][BF(4)] have been determined. The reactions of 4a,b with MeCN/Me(3)NO result in prevalent decomposition to mononuclear iron species.     

Enols of amides. The effect of fluorine substituents in the ester groups of dicarboalkoxyanilidomethanes on the enol/amide and E-enol/Z-enol ratios. A multinuclei NMR study.

Condensation of phenyl isocyanate substituted by 4-MeO, 4-Me, 4-H, 4-Br, and 2,4-(MeO)(2) with esters CH(2)(CO(2)R)CO(2)R', R = CH(2)CF(3), R' = CH(3), CH(2)CF(3), CH(CF(3))(2), or R = CH(3), R' = CH(CF(3))(2) gave 17 "amides" ArNHCOCH(CO(2)R)CO(2)R' containing three, six, or nine fluorines in the ester groups. X-ray crystallography of six of them revealed that compounds with > or =6 fluorine atoms exist in the solid state as the enols of amides ArNHC(OH)=C(CO(2)R)CO(2)R' whereas the ester with R = R' = CH(3) was shown previously to have the amide structure. In the solid enols, the OH is cis and hydrogen bonded to the better electron-donating (i.e., with fewer fluorine atoms) ester group. X-ray diffraction could not be obtained for compounds with only three fluorine atoms, i.e., R = CH(2)CF(3), R' = CH(3) but the (13)C CP-MAS spectra indicate that they have the amide structure in the solid state, whereas esters with six and nine fluorine atoms display spectra assigned to the enols. The solid enols show unsymmetrical hydrogen bonds and the expected features of push-pull alkenes, e.g., long C(alpha)=C(beta) bonds. The structure in solution depends on the number of fluorine atoms and the solvent, but only slightly on the substituents. The symmetrical systems (R = R' = CH(2)CF(3)) show signals for the amide and the enol, but all systems with R not equal R' displayed signals for the amide and for two enols, presumably the E- and Z-isomers. The [Enol I]/[Enol II] ratio is 1.6-2.9 when R = CH(2)CF(3), R' = CH(3), CH(CF(3))(2) and 4.5-5.3 when R = CH(3), R' = CH(CF(3))(2). The most abundant enol display a lower field delta(OH) and a higher field delta(NH) and assigned the E-structure with a stronger O-H.O=C(OR) hydrogen bond than in the Z-isomer. delta(OH) and delta(NH) values are nearly the same for all systems with the same cis CO(2)R group. The [Enols]/[Amide] ratio in various solvents follows the order CCl(4) > CDCl(3) > CD(3)CN > DMSO-d(6). The enols always predominate in CCl(4) and the amide is the exclusive isomer in DMSO-d(6) and the major one in CD(3)CN. In CDCl(3) the major tautomer depends on the number of fluorines. For example, in CDCl(3,) for Ar = Ph, the % enol (K(Enol)) is 35% (0.54) for R = CH(2)CF(3,) R' = CH(3), 87% (6.7) for R = R' = CH(2)CF(3), 79% (3.8) for R = CH(3), R' = CH(CF(3))(2) and 100% (> or =50) for R = CH(2)CF(3), R' = CH(CF(3))(2). (17)O and (15)N NMR spectra measured for nine of the enols are consistent with the suggested assignments. The data indicate the importance of electron withdrawal at C(beta), of intramolecular hydrogen bonding, and of low polarity solvents in stabilizing the enols. The enols of amides should no longer be regarded as esoteric species.     

Stereochemical nonrigidity of a chiral rhodium boryl hydride complex: a sigma-borane complex as transition state for isomerization

Experimental and computational studies are reported on half-sandwich rhodium complexes that undergo B-H bond activation with pinacolborane (HBpin = HB(OCMe2CMe2O)). The photochemical reaction of [Rh(eta5-C5H5)(R,R-phospholane)(C2H4)] 3 (phospholane = PhP(CHMeCH2CH2CHMe)) with HBpin generates the boryl hydride in two distinguishable isomers [(SRh)-Rh(eta5-C5H5)(Bpin)(H)(R,R-phospholane)] 5a and [(RRh)-Rh(eta5-C5H5)(Bpin)(H)(R,R-phospholane)] 5b that undergo intramolecular exchange. The presence of a chiral phosphine allowed the determination of the interconversion rates (epimerization) by 1D 1H EXSY spectroscopy in C6D6 solution yielding DeltaH = 83.4 +/- 1.8 kJ mol-1 for conversion of 5a to 5b and 79.1 +/- 1.4 kJ mol-1 for 5b to 5a. Computational analysis yielded gas-phase energy barriers of 96.4 kJ mol-1 determined at the density functional theory (DFT, B3PW91) level for a model with PMe3 and B(OCH2CH2O) ligands; higher level calculations (MPW2PLYP) on an optimized QM/MM(ONIOM) geometry for the full system place the transition state 76.8 kJ mol-1 above the average energy of the two isomers. The calculations indicate that the exchange proceeds via a transition state with a sigma-B-H-bonded borane. The B-H bond lies in a mirror plane containing rhodium and phosphorus. No intermediate with an eta2-B-H ligand is detected either by experiment or calculation. Complex 3 has also been converted to the [Rh(eta5-C5H5)Br2(R,R-phospholane)] (characterized crystallographically) and [Rh(eta5-C5H5)(H)2(R,R-phospholane)]. The latter exhibits two inequivalent hydride resonances that undergo exchange with DeltaH = 101 +/- 2 kJ mol-1. DFT calculations indicate that the boryl hydride complex has a lower exchange barrier than the dihydride complex because of steric hindrance between the phospholane and Bpin ligands in the boryl hydride.     

Enols and thioenols of substituted cyanomonothiocarbonylmalonamides: structures, enolization vs. thioenolization, equilibria and conformations

Condensation of organic isothiocyanates with cyanoacetamides gave 24 N- and N'-substituted cyanomonothiocarbonylmalonamides in different tautomeric ratios i.e., amide-thioamides (TMA)R3NHCSCH(CN)CONR1R2 (12), thioamide-enols of amides (E) R3NHCSC(CN)=C(OH)NR1R2 (11)or amide-thioenols (TE) R3NHC(SH)=C(CN)CONR1R2 (13). The equilibrium constants (K(thioenol) =[TE]/[TMA] and K(enol) = [E]/[TMA]) in solution depend on R1, R2, R3 and the solvent. The %(E + TE)for NR1R2 increases in the order NMe2 < NHMe < NH2. The (K(thioenol) + K(enol)) in various solvents follows the order CCl4 > CDCl3 > C6D6 > THF-d8 > (CD3)2CO > CD3CN > DMF-d7 > DMSO-d6. The delta(OH) values are 16.46-17.43 and the delta(SH) values are 3.87-5.26 ppm in non polar solvents, e.g.,CDCl3 and 6.34-6.97 ppm in THF-d8 and CD3CN. An intramolecular O-H...O hydrogen bond leads to the preferred Z-configuration of the enols, and an N-H...O bond stabilizes the thioenols' preferred E-configuration with a non-bonded SH in solution. X-Ray crystallography revealed that systems with high %(E + TE) in solution mostly display the enols 11 in the solid state and systems with lower %(E +TE) in solution display structure 12. The differences in delta(OH), delta(NH), K(enol) and crystallographic data for analogous enol and thioenol systems are compared.     

Synthesis, coupling, and condensation reactions of 1,2-diborylated benzenes: an experimental and quantum-chemical study

1,2-Bis(pinacolboryl)benzene (1,2-C(6) H(4) (Bpin)(2) , 2) was synthesized in preparatively useful yields from 1,2-C(6) H(4) Br(2) , iPrO?Bpin, and Mg turnings in the presence of 1,2-C(2) H(4) Br(2) as an entrainer. Compound 2 is a versatile starting material for the synthesis of (un)symmetrically substituted benzenes (i.e., 1,2-C(6) H(4) (Ar(1) )(Ar(2) )) through sequential Suzuki-Miyaura coupling reactions. Alternatively, it can be transformed into bis-borate Li(2) [1,2-C(6) H(4) (BH(3) )(2) ] (3) through reduction with Li[AlH(4) ]. In the crystal lattice, the diethyl ether solvate 3?OEt(2) establishes a columnar structure that is reinforced by an intricate network of B?(μ-H)?Li interactions. Hydride-abstraction from compound 3 with Me(3) SiCl leads to the transient ditopic borane 1,2-C(6) H(4) (BH(2) )(2) , which can either be used in situ for subsequent hydroboration reactions or trapped as its stable NMe(2) Et diadduct (6). In SMe(2) solution, the putative diadduct 1,2-C(6) H(4) (BH(2) ?SMe(2) )(2) is not long-term stable but rather undergoes a condensation reaction to give 9,10-dihydro-9,10-diboraanthracene, HB(μ-C(6) H(4) )(2) BH, and BH(3) . 9,10-Dihydro-9,10-diboraanthracene was isolated from the reaction mixture as its SMe(2) monoadduct (7), which dimerizes in the solid state through two B?H?B bridges ((7)(2) , elucidated by X-ray crystallography). In contrast, hydride-abstraction from compound 3 in THF or CH(2) Cl(2) provides the unique exo-adduct H(2) B(μ-H)(2) B(μ-C(6) H(4) )(2) B(μ-H)(2) BH(2) (8, elucidated by X-ray crystallography). Quantum-chemical calculations on various conceivable isomers of [1,2-C(6) H(4) (BH(2) )(2) ](2) revealed that compound 8 was the most stable of these species. Moreover, the calculations confirmed the experimental findings that the NMe(2) Et diadduct of 1,2-C(6) H(4) (BH(2) )(2) is significantly more stable than the corresponding SMe(2) complex and that the latter complex is not able to compete successfully with borane-dimerization and -condensation. The reaction cascade in SMe(2) , which proceeds from 1,2-C(6) H(4) (BH(2) )(2) to the observed adducts of HB(μ-C(6) H(4) )(2) BH, has been elucidated in detail and the important role of B?C?B-bridged intermediates has been firmly established.     

Regioselective cyclization of alpha,omega-alkynoic acids catalysed by TpRu complexes: synthesis of endocyclic enol lactones [Tp = hydrotris(pyrazolyl)borate

The sigma-enynyl complex [TpRu(C(Ph)=C(Ph)C identical to CPh)(P-MeiPr2)] efficiently catalyses the regioselective cyclization of alpha,omega-alkynoic acids to yield endocyclic enol lactones having ring size up to 12 atoms.     

Formation and stability of enolates of acetamide and acetate anion: an Eigen plot for proton transfer at alpha-carbonyl carbon

Second-order rate constants were determined in D(2)O for deprotonation of acetamide, N,N-dimethylacetamide, and acetate anion by deuterioxide ion and for deprotonation of acetamide by quinuclidine. The values of k(B) = 4.8 x 10(-8) M(-1) s(-1) for deprotonation of acetamide by quinuclidine (pK(BH) = 11.5) and k(BH) = 2-5 x 10(9) M(-1) s(-1) for the encounter-limited reverse protonation of the enolate by protonated quinuclidine give pK(a)(C) = 28.4 for ionization of acetamide as a carbon acid. The limiting value of k(HOH) = 1 x 10(11) s(-1) for protonation of the enolate of acetate anion by solvent water and k(HO) = 3.5 x 10(-9) M(-1) s(-1) for deprotonation of acetate anion by HO(-) give pK(a)(C) approximately 33.5 for acetate anion. The change in the rate-limiting step from chemical proton transfer to solvent reorganization results in a downward break in the slope of the plot of log k(HO) against carbon acid pK(a) for deprotonation of a wide range of neutral alpha-carbonyl carbon acids by hydroxide ion, from -0.40 to -1.0. Good estimates are reported for the stabilization of the carbonyl group relative to the enol tautomer by electron donation from alpha-SEt, alpha-OMe, alpha-NH(2), and alpha-O(-) substituents. The alpha-NH(2) and alpha-OMe groups show similar stabilizing interactions with the carbonyl group, while the interaction of alpha-O(-) is only 3.4 kcal/mol more stabilizing than for alpha-OH. We propose that destabilization of the enolate intermediates of enzymatic reactions results in an increasing recruitment of metal ions by the enzyme to provide electrophilic catalysis of enolate formation.     

Photochemistry of the three carboxypyridines in water: a pH dependent reaction

The photochemistry of ortho, meta and para-carboxypyridines (pK(a)(1)= 1.0-2.1 and pK(a)(2)= 4.7-5.3) in aqueous medium was studied by laser-flash photolysis and product studies. At pH < pK(a)(1), hydroxylated compounds are produced with low quantum yields. Within the pH range 4-7, ortho and meta isomers undergo dimerization together with decarboxylation with a quantum yield showing a very sharp maximum around pK(a)(2)([small phi](max)= 0.09 and 0.01, respectively) while the para isomer is photostable. End-of-pulse transients assigned to triplet states were detected by laser-flash photolysis at pH < pK(a)(1) and pH > 4. Additionally, the carboxypyridinyl radicals were detected as secondary intermediates at pH < pK(a)(1) and 4 < pH < 7 and the OH-adduct radicals at pH < pK(a)(1). This is in favour of an electron transfer reaction between triplet and starting compound producing a charge transfer species. The radical anion would escape as carboxypyridinyl radical while the radical cation may add water at pH < pK(a)(1) yielding the OH-adduct radical or may undergo decarboxylation at pH > 4. The high quantum yield of phototransformation of the ortho isomer at pH > 4 is due to an easy decarboxylation process. A reaction scheme is proposed accounting for the dependences of [small phi] on both the pH and the carboxypyridines concentration. This study points out the distinct pattern of reactivity of carboxypyridines depending on the ionisation state of starting compounds and isomeric substitution.     

Structural Effects on the Intrinsic Basicities of alpha,beta-Unsaturated Lactones and Ketones

The proton affinities of 2(5H)-furanone, 1 (836 kJ/mol), 5,6-dihydro-2H-pyran-2-one, 2 (862 kJ/mol), cyclopentenone, 3 (857 kJ/mol), and cyclohexenone, 4 (863 kJ/mol), have been measured by Fourier transform ion cyclotron resonance techniques. A comparison is made with (reexamined) data concerning saturated cyclic and unsaturated aliphatic analogs. Three general observations are made. First, the basicity is found to increase with the size of the ring. Second, unsaturated lactones are more basic than their corresponding aliphatic unsaturated esters. Third, unsaturated and saturated lactones have almost identical gas-phase basicities, while unsaturated and saturated lactones have almost identical gas-phase basicities, while unsaturated cyclic ketones are more basic than their saturated analogs. All these experimental findings have been rationalized by means of ab initio calculations up to the G2(MP2,SVP) level. The basicity trends along the series are the result of two main factors: the different hybridization pattern of the carbonyl carbon as the size of the ring changes and, in the case of lactones, the nonbonding interaction between the proton attached to the carbonyl group and the ether-like oxygen which contributes to the enhanced stability of the protonated form. For unsaturated ketones the C=C double bond participates fully in the change in charge distribution induced by the protonation, while for unsaturated lactones the existence of an oxygen atom within the ring impedes this shift of the electron density.     

C-X bond formation and cleavage in the reactions of the ditungsten hydride complex [W2(η5-C5H5)2(H)(μ-PCy2)(CO)2] with small molecules having multiple C-X bonds (X = C, N, O)

Two molecules of C(2)(CO(2)Me)(2) or isocyanides could be added to the title hydride complex under mild conditions to give dienyl-[W(2)Cp(2){μ-η(1),κ:η(2)-C(CO(2)Me)=C(CO(2)Me)C(CO(2)Me)=CH(CO(2)Me)}(μ-PCy(2))(CO)(2)] (Cp = η(5)-C(5)H(5)), diazadienyl-[W(2)Cp(2){μ-κ,η:κ,η-C{CHN(4-MeO-C(6)H(4))}N(4-MeO-C(6)H(4))}(μ-PCy(2))(CO)(2)] or aminocarbyne-bridged derivatives [W(2)Cp(2){μ-CNH(2,6-Me(2)C(6)H(3))}(μ-PCy(2)){CN(2,6-Me(2)C(6)H(3))}(CO)]. In contrast, its reaction with excess (4-Me-C(6)H(4))C(O)H gave the C-O bond cleavage products [W(2)Cp(2){CH(2)(4-Me-C(6)H(4))}(O)(μ-PCy(2))(CO)(2)] and [W(2)Cp(2){μ-η:η,κ-C(O)CH(2)(4-Me-C(6)H(4))}(O)(μ-PCy(2))(CO)].     

The nature of unsupported uranium-ruthenium bonds: a combined experimental and theoretical study

Four new uranium-ruthenium complexes, [(Tren(TMS))URu(η(5)-C(5)H(5))(CO)(2)] (9), [(Tren(DMSB))URu(η(5)-C(5)H(5))(CO)(2)] (10), [(Ts(Tolyl))(THF)URu(η(5)-C(5)H(5))(CO)(2)] (11), and [(Ts(Xylyl))(THF)URu(η(5)-C(5)H(5))(CO)(2)] (12) [Tren(TMS)=N(CH(2)CH(2)NSiMe(3))(3); Tren(DMSB)=N(CH(2)CH(2)NSiMe(2)tBu)(3)]; Ts(Tolyl)=HC(SiMe(2)NC(6)H(4)-4-Me)(3); Ts(Xylyl)=HC(SiMe(2)NC(6)H(3)-3,5-Me(2))(3)], were prepared by a salt-elimination strategy. Structural, spectroscopic, and computational analyses of 9-12 shows: i) the formation of unsupported uranium-ruthenium bonds with no isocarbonyl linkages in the solid state; ii) ruthenium-carbonyl backbonding in the [Ru(η(5)-C(5)H(5))(CO)(2)](-) ions that is tempered by polarization of charge within the ruthenium fragments towards uranium; iii) closed-shell uranium-ruthenium interactions that can be classified as predominantly ionic with little covalent character. Comparison of the calculated U-Ru bond interaction energies (BIEs) of 9-12 with the BIE of [(η(5)-C(5)H(5))(3)URu(η(5)-C(5)H(5))(CO)(2)], for which an experimentally determined U-Ru bond disruption enthalpy (BDE) has been reported, suggests BDEs of approximately 150 kJ mol(-1) for 9-12.     

Ab Initio Quantum Mechanical Study on the Origin of the pK(a) Differences of the Proton Sponges 1,8-Bis(dimethylamino)naphthalene, 1,8-Bis(dimethylamino)-2,7-dimethoxynaphthalene, 1,6-Dimethyl-1,6-diazacyclodecane, and 1,6-Diazabicyclo[4.4.4]tetradecane

Ab initio quantum mechanical calculations were used in studying the origin of the exceptionally high basicities of four diamines (13-16) with pK(a1) values ranging from 12.1 to 25. The computational approach involved the calculation of the gas-phase proton affinities of the molecules studied at the MP2/6-31G//HF/6-31G level and the solvation energies with the polarizable continuum model at the HF/6-31G level. The calculated gas-phase and aqueous-phase proton affinities of a structurally diverse series of amines were compared with the corresponding experimental gas-phase proton affinities and pK(a1) values. The calculated values were found to be in reasonable agreement with the experimental ones. The high basicities of the studied diamines were found to originate from the nitrogen lone-pair repulsion, solvation effects, and strong intramolecular hydrogen bonds. Each of these factors were found to be able to increase the pK(a1) values of the high-basicity diamines by 2-6 pK(a) units. The relative contributions of the factors varied between the compounds. The nitrogen lone-pair repulsion was estimated to be the most important factor in increasing the pK(a1) values. In addition, barriers for proton transfers between the nitrogens of selected diamines were calculated, and comparison was made between the barrier heights and the geometries of the diamines.