ELECTRORHEOLOGICAL PROPERTIES OF DIATOMITE/SILICONE OIL SUSPENSIONS UNDER DC FIELDS

In this study, electrorheological （ER） behavior of suspensions prepared from 3.0 and 9.0 μm diatomite particulate, dispersed in insulating silicone oil （SO） medium was investigated. Sedimentation stabilities of suspensions （c = 5 wt%） prepared using these diatomite powders were determined to be 32 days （d = 3 μm） and 24 days （d = 9 μm）, respectively. ER activity of all the suspensions was observed to increase with increasing electric field strength, concentration and decreasing shear rate. Shear stress of diatomite suspensions increased linearly with increasing concentrations of the particles and with the applied electric field strength. Electric field viscosity of all the suspensions decreased sharply with increasing shear rate and particle size, showing a typical shear thinning non-Newtonian visco-elastic behavior. Effects of high temperature and polar promoter onto ER activity ofdiatomite/SO system were also investigated.     

ELECTRORHEOLOGICAL PROPERTIES OF TALC POWDER/SILICONE OIL SUSPENSIONS UNDER DC FIELDS

In this study, the electrorheological （ER） behavior of suspensions prepared from d50 = 2.4 lam talc powder, dispersed in insulating silicone oil （SO） medium was investigated. Sedimentation stabilities of suspensions （c = 5 wt%） prepared using these talc powder powders were determined to be 78 days. The ER activity of all the suspensions was observed to increase with increasing electric field strength, concentration and decreasing shear rate. The shear stress of talc powder suspensions increased linearly with increasing concentrations of the particles and with the applied electric field strength. Electric field viscosity of all the suspensions decreased sharply with increasing shear rate and showed a typical shear thinning non-Newtonian visco-elastic behavior. Effects of frequency on the ER activity of talc powder/SO system were also investigated.     

Synthesis and electrorheological characterization of emulsion-polymerized dodecylbenzenesulfonic acid doped polyaniline-based suspensions

The electrorheological (ER) properties of dodecylbenzenesulfonic acid (DBSA) doped polyaniline suspensions in silicone oil were investigated. In contrast to chemically polymerized polyaniline in an acidic aqueous medium by oxidation polymerization, we adopted an emulsion polymerization technique in which aniline is polymerized in an emulsion of water and a nonpolar (or weakly polar) organic solvent. The effects of electric field strength and particle concentration on the ER properties of DBSA-doped polyaniline suspensions in silicone oil were then examined. Rheological measurements were also carried out using a rotational rheometer with a high-voltage generator in both controlled shear rate and shear stress modes, and the results showed that the ER properties were enhanced by increasing the particle concentration and electric field. Received: 23 August 1999 Accepted: 6 April 2000     

An investigation of electrorheological properties of calcium carbonate suspensions in silicone oil

In this study, electrorheological behavior of suspensions prepared from 0.9 and 5.0 µm calcium carbonate particulates, dispersed in insulating silicone oil medium was investigated. Sedimentation stabilities of suspensions (c = 5 wt %) prepared using these calcium carbonate powders were determined to be 6 and 4 days, respectively. Electrorheological activity of all the suspensions was observed to increase with increasing electric field strength, concentration and decreasing shear rate. Shear stress of calcium carbonate suspensions increased linearly with increasing concentrations of the particles and with the applied electric field strength. Electric field viscosity of all the suspensions was decreased sharply with increasing shear rate and particle size, showing a typical shear thinning non-Newtonian visco-elastic behavior. Effects of elevated temperature and polar promoter onto electrorheological activity of calcium carbonate/silicone oil system were also investigated.__________From Kolloidnyi Zhurnal, Vol. 67, No. 2, 2005, pp. 268–273.Original English Text Copyright © 2005 by Yilmaz, Ünal, Yavuz.This article was submitted by the authors in English.     

壳聚糖电流变体的导电特性

电流变体是由高介电颗粒分散在低介电油相中组成的悬浮液,在电场作用下,其表观粘度急剧增大甚至发生固化,这种转变过程速度快（达毫秒级）而且是可逆的［１］．由于这种独特的电场响应性,电流变体有广阔的工程应用前景．但电流变体在显示电流变效应的同时也表现出复杂...     

Electrorheology of aniline oligomers

Aniline oligomers were prepared by the oxidation of aniline with p-benzoquinone in aqueous solutions of methanesulfonic acid (MSA) of various concentrations. Their molecular structures were assessed by Fourier transform infrared spectroscopy. The electrorheological (ER) behavior of their silicone oil suspensions under applied electric field has been investigated. Shear stress at a low shear rate, τ _0.9, was used as a criterion of the rigidity of internal structures created by the application of an electric field. It was established from the fitting of the dielectric spectra of the suspensions with the Havriliak–Negami model that dielectric relaxation strength, as a degree of polarization induced by an external field contributing to the enhanced ER effect, increases and relaxation time, i.e., the response of the particle to the application of the field, decreases when a higher molar concentration of MSA is used. The best values were observed for suspensions of the sample prepared in the presence of 0.5 M of MSA. This suspension creates stiff internal structures under an applied electric field strength of 2 kV mm^?1 with τ _0.9 of nearly 50 Pa, which is even slightly of higher value than that obtained for standard polyaniline base ER suspension measured at the same conditions. The concentration of the MSA used in the preparation of oligomers seems to be a crucial factor influencing the conductivity, dielectric properties and, consequently, rheological behavior, and finally ER activity of their suspensions.     

Electrorheological properties of PMMA-b-PSt copolymer suspensions

In this study, a block copolymer of methyl methacrylate (MMA) and styrene (St) synthesized by combined ultrasonic irradiation and reverse atom transfer radical polymerization (RATRP) processes was used. PMMA-b-PSt was partially hydrolyzed and converted to a lithium salt, PMMA-b-PSt-Li, before the electrorheological (ER) measurements carried out. Average particle diameter of PMMA-b-PSt-Li polymeric salt was determined by dynamic light scattering (DLS) as 22 mum. Suspensions of PMMA-b-PSt-Li polymeric salts were prepared in silicone oil. ER properties of PMMA-b-PSt-Li/silicone oil suspensions were studied as a function of electric field strength, dispersed phase concentration, shear rate, shear stress, temperature, frequency, and polar promoter. Further dielectric properties of PMMA-b-PSt-Li ionomer were also investigated.     

Electrorheological behavior of suspensions of a substituted polyaniline with long alkyl pendants

The electrorheological (ER) properties of poly(2-dodecyloxyaniline) (PDOA) suspensions in silicone oil were investigated. The ER behavior of such suspensions of polyaniline particles depends on the type of stabilizer and doping or dedoping level. Here we report on the ER behavior of particles of a substituted polyaniline with long alkyl pendants. Rheological measurements were carried out using a rotational rheometer with high-voltage generator in both constant shear stress and rate modes. Suspensions of the as-synthesized polyaniline particles in silicone oil showed a substantial ER response.     

Effects of medium oil on electroresponsive characteristics of chitosan suspensions

Biocompatible chitosan particle suspensions in host oils of corn, soybean, and silicone were prepared and their electrorheological (ER) characteristics were examined under the imposition of electric fields. The effects of the weight concentration of particulate chitosan and the strength of the applied electric field on ER response in the various chitosan particle suspensions were investigated via measurements of rheological properties including flow curve, shear viscosity, and yield stress. The yield stresses of the three different chitosan–oil systems showed different values of slope in the electric field, but all data were found to fit well with our previously proposed universal scaling function.     

稀土掺杂PMMA包裹硅铝氧烷凝胶的ER效应

以二氧化硅微粒制备电流变液是研究者使用较多的一种方法[1] ,但由于二氧化硅的密度相对于分散相硅油来说太大 ,所以制成的电流变液稳定性较差。而用导电高分子微粒制成的电流变液则有在高电场时漏电流密度较大的问题[2 ] 。有研究者用直接聚合法在二氧化硅纳米微粒外包裹一层有机共聚物 ,生成一种微囊复合颗粒 ,可以使其相对密度减小 ,提高了电流变液的稳定性[3] 。我们以廉价水玻璃为原料制取硅铝氧烷溶胶 ,在其表面包裹聚甲基丙烯酸甲酯 (ＰＭＭＡ)后 ,得到ＰＭＭＡ包裹的硅铝氧烷凝胶具有相当的稳定性和易极化性 ,易形成较稳定的悬浮液 …     

Electrorheological properties of polyaniline suspensions: field-induced liquid to solid transition and residual gel structure

Polyaniline (PANI) was synthesized via oxidative coupling polymerization in acid conditions and de-doped in solution of ammonia. The electrorheological (ER) properties of the PANI/silicone oil suspensions were investigated in oscillatory shear as functions of electric field strength, particle concentration, and host fluid viscosity. Consistent with literature, the PANI ER fluid exhibits viscoelastic behavior under the applied electric field and the ER response is strongly enhanced with increasing electric field strength and particle concentration. The dynamic moduli, G' and G' increase dramatically, by 5 orders of magnitude, as the electric field strength is increased to 2 kV/mm. A viscoelastic liquid to solid transition occurs at a critical electric field strength, in the range Ec = 50-200 V/mm, whose value depends on particle concentration and host fluid viscosity. The fibrillar structure formed in the presence of the applied field has a static yield strength tau(y), whose value scales with electric field strength as tau(y) approximately E(1.88). When the field is switched off a residual structure remains, whose yield stress increases with the strength of the applied field and particle concentration. When the applied stress exceeds the yield stress of the residual structure, fast, fully reversible switching of the ER response is obtained.     

Electrorheological fluid characterization via a vertical oscillation rheometer

A custom designed vertical oscillation rheometer (VOR) is used for the rheological measurements of electrorheological (ER) fluids consisting of 15 and 20 vol.% semiconducting polyaniline particles suspended in silicone oil. The viscoelastic material functions, including complex viscosity and complex shear modulus, are measured via geometric parameters, measured force, and applied strain of the VOR. Viscoelastic properties of the ER fluids are also measured as a function of applied electric field strength and particle concentration. The VOR, equipped with a high voltage generator, can easily be constructed and used to measure ER properties. It is further found that polyaniline suspensions behave as viscoelastic materials in an electric field. In linear viscoelastic conditions, elasticity was promoted with the increment of electric field due to particle chain structure in the presence of the applied electric field. It is also found that the applied electric field rather than particle concentration enhanced the elasticity of ER fluids.     

Synthesis and electrorheology of camphorsulfonic acid doped polyaniline suspensions

 Semiconducting camphorsulfonic acid doped polyaniline (PANI–CSA) particles were synthesized by chemical oxidation polymerization, and their chemical structure and particle size were examined via Fourier transform IR spectroscopy and scanning electron microscopy, respectively. Electrorheological (ER) fluids were prepared by dispersing the PANI–CSA particles in silicone oil, and their steady-shear rheological properties under electric fields were investigated using a rotational rheometer with a high-voltage generator. The PANI–CSA synthesized in this study possesses typical ER behavior:shear stress increases with increasing electric field strengths. Received: 31 August 2000 Accepted: 6 April 2001     

Electrorheological properties of perchloric acid-doped polythiophene suspensions

Poly(3-thiopheneacetic acid), PTAA, was synthesized via an oxidative polymerization and doped with perchloric acid to control its conductivity. The rheological properties of the HClO₄-doped PTAA/silicone oil suspensions were measured in oscillatory shear to investigate the effects of electric field strength, particle concentration, and particle conductivity on electrorheological (ER) characteristics. The PTAA-based ER fluids exhibit viscoelastic behavior under an applied electric field and the ER response is amplified with increase of electric field strength. The dynamic moduli, G and G, increase dramatically by ten orders of magnitude when the field strength is increased to 2 kV/mm. The suspensions exhibit a transition from fluid-like to solid-like behavior as the field strength increases, and reach a saturated ER response at a field strength of 1 kV/mm. Increase of particle concentration and particle conductivity result in a lower transition field strength. Scaling arguments are presented which successfully superpose the scaled moduli at various electric field strengths onto a single master function of the dimensionless frequency.     

Development and micro-gap flow evaluation of electro-rheological nano-suspensions

Electro-rheological (ER) nano-suspensions based on titanium dioxide nano-particles with particle diameter on the order of 100 nm were prepared. Micro-gap flow behavior and microstructure were evaluated for the suspensions with a particle volume fraction of 8.8 vol%. For the nano-suspension based on a silicone oil, the ER effect and flow behavior were found to be stable during the sharing time on the order of 10²?s. The ER response measured at a given strength of the electric field for the nano-suspension based on a chemically modified silicone oil was effectively induced by the electric field, especially with low strengths, and it was larger than that of the nano-suspension based on the silicone oil but slightly lower than that based on a hydrocarbon oil. Furthermore, the relaxation of the ER response after removal of the electric field was somewhat slow for the nano-suspension based on the hydrocarbon oil, whereas it was fairly well for the nano-suspension based on the modified silicone oil.     

Some Novel Conducting Polythiophene Derivatives: Theoretical Analysis,Synthesis, Characterization and Electroreological Properties

A series of alternating phylene and symmetrically bithiophene containing repeat units and the respective homopolymers have been synthesized and characterized by combining FTIR, UV-Vis spectroscopy, four probe conductivity measurement, TGA and SEM analysis. Quantum mechanical calculations of the structures and infrared spectra of the monomers and respective dimers were compared with experimental results. The polymers are soluble in N-methyl-pyrrolidone (NMP). The samples have conductivities of 10^?5 S/cm levels. Thermal degradation analysis results indicated that poly-bithiophene derivatives have higher thermal stabilities than poly-monothiophene derivatives. All samples exhibited different surface morphologies. The electrorheological (ER) properties of polymer suspensions in silicone oil were prepared and ER behavior was investigated as a function of shear rate, electric field strength and frequency.     

Synthesis,Characterization and Electrorheological Properties of Polyindene/Kaolinite Composites

In this study, synthesis, characterization and electrorheological (ER) properties of polyindene (PIN) and polyindene/kaolinite composites were carried out by cationic radical polymerization using FeCl₃ as the oxidizing agent. The homopolymer and composites, containing different amounts of PIN were characterized by FTIR spectroscopy, thermo‐gravimetric (TGA) analyses, scanning electron microscopy (SEM) and dynamic light scattering (DLS) methods. The conductivity and dielectric properties of PIN and PIN/kaolinite composites were determined. Suspensions of PIN and PIN/kaolinite composites were prepared in silicone oil (SO), at a series of concentrations (c=5–25 m/m %). The effects of concentration, shear rate, electric field strength, frequency, temperature and promoter on ER activities of suspensions were investigated.     

稀土掺杂聚苯撑ER流体的研究

选用CeCl4和FeCl3等对自制的对苯撑进行掺杂,将制得的高介电聚苯撑粉末加入到硅油中得到电流变体流体,测量了在电场作用下粘度和漏电流密度,以及相关的物理常数。讨论了电场强度、粒子浓度与粘度和漏电流密度的关系,粘度变化的响应速度和恢复时间,并探讨了其相关机制。     

Electrorheology and creep-recovery behavior of conducting polythiophene/poly(oxymethylene)-blend suspensions

Electrorheological properties and creep-recovery behavior of polythiophene/polyoxymethylene-blend having PT（50%）/POM（50%） composition were investigated.Particle size,conductivity and dielectric values were measured to be 24.77μm,3.85×10^-5 S·m^-1 and 26.75,respectively.Sedimentation ratio was measured to be 64%at the end of 16 days.The effects of dispersed particle volume fraction,external electric field strength,shear rate,frequency and temperature on ER properties and storage modulus of PT/POM-blend/silicone oil（SO） suspensions were examined.Enhancement were observed in the electric field viscosities of the suspensions and thus they were classified as a smart material.Shear thinning non-Newtonian viscoelastic behavior was determined for PT/POM-blend/SO system.Further,time-dependent deformation was examined by creep-recovery tests and recoverable viscoelastic deformation established.     

Electrorheological properties of suspensions of hollow globular titanium oxide/polypyrrole particles

Hollow globular clusters of titanium oxide (TiO₂) nanoparticles were synthesized by a simple hydrothermal method. The prepared particles were consequently coated by in situ polymerization of conductive polymer polypyrrole (PPy) to obtain novel core–shell structured particles as a dispersed phase in electrorheological (ER) suspensions. The X-ray diffraction analysis and scanning electron microscopy provided information on particle composition and morphology. It appeared that PPy coating improved the compatibility of dispersed particles with silicone oil which results in higher sedimentation stability compared to that of mere TiO₂ particles-based ER suspension. The ER properties were investigated under both steady and oscillatory shears. It was found that TiO₂/PPy particles-based suspension showed higher ER activity than that of mere TiO₂ hollow globular clusters. These observations were elucidated well in view of their dielectric spectra analysis; a larger dielectric loss enhancement and faster interfacial polarization were responsible for a higher ER activity of core–shell structured TiO₂/PPy-based suspensions. Investigation of changes in ER properties of prepared suspensions as a function of particles concentration, viscosity of silicone oil used as a suspension medium, and electric field strength applied was also performed.