Electrochemical synthesis and characterization of poly(3,4-ethylenedioxythiophene) in ionic liquids with bulky organic anions

The electrochemistry of poly(3,4-ethylenedioxythiophene) (PEDOT) was studied in two ionic liquids with bulky organic anions, i.e., 1-butyl-3-methylimidazolium (BMIM) diethylene glycol monomethyl ether sulfate (MDEGSO₄) and BMIM octyl sulfate (OctSO₄). BMIM-MDEGSO₄ is a liquid, while BMIM-OctSO₄ is in solid form at room temperature. Electrosynthesis of PEDOT in BMIM-MDEGSO₄ with an EDOT concentration of 0.1 M and in BMIM-MDEGSO₄/EDOT 1/1 (w/w) solution resulted in no polymer at all or a very limited amount of polymer on the electrode surface, as determined by cyclic voltammetry in 0.1 M KCl(aq) solution. In contrast, electrosynthesis of PEDOT in BMIM-OctSO₄/EDOT 1/1 (w/w) resulted in a high yield of electroactive material on the electrode surface. Furthermore, electrosynthesis of PEDOT in ionic liquid–water solution (C_{ionic liquid}=1.5 M) containing 0.1 M EDOT was also found to give a relatively high yield of electroactive material on the electrode surface, both for 1.5 M BMIM-MDEGSO₄(aq) and 1.5 M BMIM-OctSO₄(aq). The PEDOT electrodes showed an anionic potentiometric response in 10^–5–10^–1 M KCl(aq) solution, indicating a predominant anion transfer at the polymer–solution interface despite the relatively bulky anions (MDEGSO₄^– or OctSO₄^–) incorporated as counterions in PEDOT during electropolymerization. On the basis of electrochemical impedance spectroscopy, the charge (ion) transport properties of the polymer film were strongly influenced by the water content of the ionic liquid (C_{ionic liquid}=0.05–2.0 M).Dedicated to Zbigniew Galus on the occasion of his 70th birthday     

Chromium(III)-Selective Electrodes Based on Titanium Dichalcogenides Intercalated with Chromium

Solid-contact chromium-selective film electrodes were prepared on the basis of titanium diselenide and titanium ditelluride intercalated with chromium. It was found that the titanium diselenide–based electrode with the lowest concentration of the intercalant (Cr_0.1TiSe₂) exhibits the best properties and provides the determination of 5 × 10^–5–1 × 10⁰M chromium(III) in the pH range 2.75–4.7. The slope of the electrode function for all chromium-selective electrodes depends on the pH of the solution and is close to the theoretical slope for the singly charged Cr(OH)⁺ ₂ ion. It was demonstrated that chromium-selective electrodes can be used as indicator electrodes in determining chromium(III) by direct titration with the potentiometric detection of the titration end-point using EDTA and KMnO₄as titrants.     

Voltamperometric determination of uranium and plutonium in alkaline solutions

The simultaneous determination of U(VI), Pu(VI), Pu(V) in 0.5–4.0 M NaOH has been elaborated by means of classical and differential pulse voltamperometry. U(VI) is determined with a dropping mercury electrode (DME) at the half-wave potential of E_1/2=–0.89 V vs. Ag/AgCl reference electrode due to reduction to U(V). The limiting current or peak heights are proportional to uranium(VI) concentration in the range of 1.3.10^–7–3·10^–4 M U(VI). Deviation from proportionality is observed for higher concentrations due to polymerization of uranates. Pu(VI) and Pu(V) are determined with a platinum rotating electrode at E_1/2=–0.02 V due to the reaction Pu(VI)+e^–»Pu(V) and with DME at E_1/2=–1.1 V due to the reduction to Pu(III). The limiting currents of both Pu(VI) and Pu(V) are proportional to their concentrations in the range of 4·10^–6–1.2·10^–3 M Pu. The determination of U(VI), Pu(VI), Pu(V) is not interfered by the presence of the following salts: 2M NaNO₃, 2M NaNO₂, 1.5M NaAlO₂, 0.5M NaF and ions of Mo(VI), W(VI), V(V), Cu(II). The presence of CrO ₄ ^2– and FeO ₂ ^– ions disturbs the determination of U(VI) in 1–4M NaOH, however, contribution of the reaction Fe(III)+e^–»Fe(II) to uranium reduction peak can be calculated from the height of the second peak Fe(II)+2 e^–»Fe(0).     

Estimation of Cr(VI) in water,tannery and plating wastes

Summary Estimation of Cr(VI) in Water, Tannery and Plating Wastes A zirconium tellurite membrane exhibits good selectivity for CrO₄ ^2– or CrO₇ ^2– ions at pH 3–6 and 8–11. Membrane electrode can be used to determine the activity of Cr(VI) ions in the concentration range 10^–1 to 7×10^–5 M at specified pH. The response time is 30 s and a large number of anions and cations do not interfere with the functioning of this assembly. It has been tried for the estimation of Cr(VI) in plating and tannery waste.     

Synthesis and applications of poly(acryl<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonamideamidine-<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonylamide) chelating fiber for pre-concentrating and separating trace Bi(III), Hg(III), Au(III) and Pd(IV) from solution samples

Poly(acrylp-aminobenzenesulfonamideamidine-p-aminobenzenesulfonylamide) chelating fiber containing "S", "N", and "O" elements was synthesized from polyacrylonitrile fiber and p-aminobenzene sulfonamide and used to enrich and separate trace Bi(III), Hg(III), Au(III), and Pd(IV) ions from wastewater and ore sample solution. The enrichment acidity, flow rate, elution conditions, reuse, interference ions, saturated adsorption capacity, constant of adsorption rate, analytical accuracy, and actual samples on chelating fiber were investigated by means of inductively coupled plasma optical emission spectrometry (ICP-OES) with satisfactory results. Solutions of 100 ng mL^–1 of Bi(III), Hg(III), Au(III), and Pd(IV) ions can be enriched quantitatively by this chelating fiber at a rate of 1.0 mL min^–1 at pH 4 and desorbed quantitatively with 20 mL of 0.25 M HCl and 2% CS(NH₂)₂ solution at 50 °C (with recovery 97%). When the chelating fiber was reused for 20 times, the recoveries of the analyzed ions enriched by the fiber were still over 95% (except for Hg(III)). One thousand-fold excesses of Mn²⁺, Ca²⁺, Zn²⁺, Mg²⁺, Fe³⁺, Cu²⁺, Ni²⁺, Al³⁺, and Ba²⁺ ions and thousands-fold excesses of Na⁺ and K⁺ cause little interference in the pre-concentration and determination of the analyzed ions. The saturated adsorption capacity of Bi(III), Hg(III), Au(III), and Pd(IV) was 4.850×10^–4, 3.235×10^–4, 2.807×10^–4, and 3.386×10^–4 mol g^–1, respectively. The constants of adsorption rate were 0.409 min^–1 for Bi, 0.122 min^–1 for Hg, 0.039 min^–1 for Au, and 0.080 min^–1 for Pd. The relative standard deviations (RSDs) for the enrichment and determination of 10 ng mL^–1 Bi(III), Hg(III), Au(III), and Pd(IV) were lower than 2.3%. The results obtained for these ions in actual samples by this method were basically in agreement with the given values with average errors of less than 1.0%. FT-IR spectra shows that the existence of –SO₂–Ar, –H₂N–Ar, O=C–NH–, HN=C–NH–, and –HN–SO₂ functional groups are verified in the chelating fiber. From the FT-IR spectroscopy, we can see that Hg(III), Au(III), and Pd(IV) are mainly combined with nitrogen and sulfur (or oxygen), and Bi(III) is mainly combined with nitrogen (or oxygen) of the groups to form a chelating complex.     

Speciation of Cr(VI)/Cr(III) by electrothermal atomisation AAS after electrodeposition on a L'vov platform

Summary The pyrolysed graphite L'vov platform of a tube furnace is considered as an electrode for the electrodeposition and speciation of chromium by electrothermal atomisation atomic absorption spectrometry (ETA-AAS). Firstly, a preliminary study of the Cr(VI)/Cr(III) voltammetric behavior at pH 4.70 on a glassy-carbon electrode is carried out. Secondly, the L'vov platform is used as a cathodic macro-electrode for the selective preconcentration of Cr(VI)/Cr(III) on a mercury film. Speciation of Cr(VI)/Cr(III) is carried out on the basis of the electrolysis potential (E_e): at pH 4.70 and E_e=–0.30 V, only Cr(VI) is reduced to Cr(III) and accumulated as Cr(OH)₃ by adsorption on a mercury film; at E_e=–1.80 V both Cr(VI) and Cr(III) are accumulated forming an amalgam with added mercury(II) ions. Once the film has been formed, the platform is transferred to a graphite tube to atomise the element. The reliability of the method was tested for the speciation of chromium in natural waters and it proves to be highly sensitive thanks to the electroanalytical step. In all samples, the Cr(VI) concentration was less than the detection limit (0.15 ng ml^–1), and the concentration of Cr(III) agrees with those of total chromium. The analytical recovery of Cr(VI) added to water samples [3.50 ng ml^–1 of Cr(VI)] was 105±6.2%.     

Speciation of Pu ions by differential pulse polarography

By means of differential pulse polarography, Pu ions of different oxidation states have been investigated in 1M Na₂CO₃ solution. Redox reactions of Pu/III/, Pu/IV/, Pu/V/ and Pu/VI/, which are mostly of irreversible nature, have been observed within the potential range of the dropping mercury electrode /DME/, from 0 to –1.5 V, against a Ag/AgCl/NaCl (3M) reference electrode. Based on the peak potential observed for each reaction, the stability of a given oxidation state in the solution could be ascertained. The redox potential of the Pu/IV/–Pu/III/ pair, which was found to be –1.0 V, indicated that the Pu/IV/ carbonate complex was of high stability. The detection sensitivity of the Pu/IV/ ion was found to be 1×10^–6M.     

Solubility and Phase Behavior of Cr(III) Oxides in Alkaline Media at Elevated Temperatures

A platinum-lined, flowing autoclave facility is used to investigate the solubility behavior of Cr₂O₃ and FeCr₂O₄ in alkaline sodium phosphate, sodium hydroxide, and ammonium hydroxide solutions between 21 and 288°C. Baseline Cr(III) ion solubilities were found to be on the order of 0.1 nmolal, which were enhanced by the formation of anionic hydroxo and phosphato complexes. At temperatures below 51°C, the activity of Cr(III) ions in aqueous solution is controlled by a Cr(OH)₃·3H₂O solid phase rather than Cr₂O₃; above 51°C the saturating solid phase is -CrOOH. Measured chromium solubilities were interpreted via a Cr(III) ion hydrolysis/complexing model and thermodynamic functions for the hydrolysis/complexing reaction equilibria were obtained from least-squares analyses of the data. The existence of four new Cr(III) ion complexes is reported: Cr(OH)₃(H₂PO₄)^–, Cr(OH)₃(HPO₄)^2–, Cr(OH)₃(PO₄)^3–, and Cr(OH)₄(HPO₄)-(H₂PO₄)^4–. The last species is the dominant Cr(III) ion complex in concentrated, alkaline phosphate solutions at elevated temperatures.     

Potentiometric Study of Reactions of Titanium Complexes in Phosphate–Perchlorate Acid Solutions

The potentiometric method is used to measure the equilibrium potential in the Ti(IV)/Ti(III) system and determine that monophosphate Ti(IV) complexes and Ti³⁺hydrated complexes dominate in phosphate–perchlorate acid solutions, 4M(H, Na)ClO₄, at of 5 × 10^–2to 4 × 10^–1M. Equations that describe the total electrode reaction are proposed. Decreasing the concentration of free hydrogen ions from 3 to 0.12 M results in the deprotonation of TiO(H₂PO₄)⁺complexes and the formation of TiO(HPO₄) complexes. Equilibrium constants for reactions of the formation of Ti(IV) monophosphate complexes and the protonation of TiO(HPO₄) complex are calculated.     

Liquid — Liquid extraction of silver(I) by diphenyl-2-pyridylmethane in benzene from aqueous mineral acid — Thiocyanate solutions

Liquid — liquid extraction of Ag(I) by diphenyl-2-pyridylmethane (DPPM) in benzene from aqueous nitric and sulfuric acid solutions containing thiocyanate ions has been studied at ambient temperature (24±2 °C). The metal is extracted quantitatively from 0.01M HNO₃+0.02M KSCN; or 0.25M H₂SO₄+0.02M KSCN by 0.1M DPPM (optimum extraction conditions). Slope analysis indicates that two types of ion-pair complexes i.e. [(DPPMH)⁺·Ag(SCN) ₂ ^– ] and [(DPPMH) ₂ ⁺ ·Ag(SCN) ₃ ^2– ] are involved in the extraction process. Separation factors determined at optimum conditions reveal the separation of Ag(I) from Cs(I), Br(I), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Fe(III), Au(III) (from HNO₃ solution only), Cr(III), Hf(IV), Ta(V), Sn(IV) and Cr(VI). With the exception of thiosulfate, other complexing anions like ascorbate, acetate, citrate, oxalate do not hinder the extraction of Ag(I) under optimum conditions.     

Linear scan stripping voltammetry of copper(II) at the chemically modified carbon paste electrode

A new chemically modified electrode (CME), -benzoinoxime (CUPRON) modified carbon paste electrode, for determining copper(II) is reported because of its excellent selectivity and sensitivity. The electrode is made by mixing a quantity of CUPRON (25%, w/w) with graphite powder (50%, w/w) and paraffin oil (25%, w/w). The CME preferentially deposits copper from the pH 8.5 NH₃-NH₄Cl buffer solution containing copper(II) under an open circuit and most of metal ions do not interfere with the measurements. The detection limit (S/N of three) for determining Cu(II) is 3 × 10^–10 g/ml after 10 min accumulation in fast linear scan stripping voltammetric measurement. Linear calibration curves are obtained for Cu(II) concentration ranged from 1 × 10^–8 M to 1 × 10^–6 M. The response can be maintained with relative standard deviation of 6.0% in a 5 × 10^–6 M Cu(II) solution after eight accumulation/measurement/ regeneration cycles at the same electrode surface. The effect resulted from carbon paste preparation, reduction potential, electrode renewal, electrolyte and solution pH, preconcentration time, concentration dependence, possible interference and other variables has been evaluated. As for application, the CME demonstrates its high sensitivity and copper-selectivity in complex composition samples, such as anodic mud and polluted water.     

Potentiometrische Cyanidbestimmung in Gegenwart von Hexacyanochromat(III)

Zusammenfassung Im Konzentrationsbereich 2 · 10^–4–3 · 10^–3 Mol/l lassen sich Cyanidionen in Gegenwart von 0,01 Mol/l [Cr(CN)₆]^3– potentiometrisch bestimmen. Als Indicatorelektrode diente eine Silberjodidmembranelektrode oder eine jodierte Silberelektrode. Zusatz von festem AgJ erhöht die Reproduzierbarkeit.

---

Potentiometric determination of cyanide in presence of hexacyanochromate(III)

2×10^–4–3×10^–3 Mol/l of cyanide can be determined in presence of 0.01 Mol/l of [Cr(CN)₆]^3–. Indicator electrode is a silver iodide membrane or an iodized silver electrode. Solid AgI is added for improved reproducibility.

---

---

Herrn Prof. H. L. Schläfer danke ich sehr für sein Interesse an dieser Arbeit.Der Deutschen Forschungsgemeinschaft danke ich für finanzielle Unterstützung.     

Amperometric nitrite sensor based on hemoglobin/colloidal gold nanoparticles immobilized on a glassy carbon electrode by a titania sol-gel film

A novel amperometric nitrite sensor was developed based on the immobilization of hemoglobin/colloidal gold nanoparticles on a glassy carbon electrode by a titania sol-gel film. The sensor shows a pair of well-defined and nearly reversible cyclic voltammogram peaks for Hb Fe(III)/Fe(II) with a formal potential (E°) of –0.370 V, and the peak-to-peak separation at 100 mV s^–1 was 66 mV vs. Ag/AgCl (3.0 M KCl) in a pH 6.9 phosphate buffer solution. The formal potential of the Hb Fe(III)/Fe(II) couple shifted linearly with pH with a slope of –50.0 mV/pH, indicating that electron transfer accompanies single-proton transportation. The sensor exhibited an excellent electrocatalytic response to the reduction of nitrite. The reduction overpotential was 0.45 V below that obtained at a colloidal gold nanoparticles/TiO₂ sol-gel film-modified GCE. The linear range for nitrite determination for the sensor was 4.0×10^–6 to 3.5×10^–4 M, with a detection limit of 1.2×10^–6 M. The stability, repeatability and selectivity of the sensor were also evaluated.     

Organically modified silica gel and flame atomic absorption spectrometry: employment for separation and preconcentration of nine trace heavy metals for their determination in natural aqueous systems

A 5-formyl-3-(1′-carboxyphenylazo) salicylic acid-bonded silica gel (FCPASASG) chelating adsorbent was synthesized according to a very simple and rapid one step reaction between aminopropyl silica gel (APSG) and 5-formyl-3-(1′-carboxyphenylazo) salicylic acid (FCPASA) and its adsorption characteristics were studied in details. Nine trace metals viz.: Cd(II), Zn(II), Fe(III), Cu(II), Pb(II), Mn(II), Cr(III), Co(II) and Ni(II) can be quantitatively adsorbed by the adsorbent from natural aqueous systems at pH 7.0–8.0. The adsorbed metal ions can be readily desorbed with 1 M HNO₃ or 0.05 M Na₂EDTA. The distribution coefficient, K_d and the percentage concentration of the investigated metal ions on the adsorbent at equilibrium, C_M,_eqm % (Recovery, R%) were studied as a function of experimental parameters. The logarithmic values of the distribution coefficient, logK_d, are 3.7–6.4. Some foreign ions caused little interference in the preconcentration and determination of the investigated nine metals by flame atomic absorption spectrometry (AAS).The adsorption capacity of FCPASASG was 0.32–0.43 meq g⁻¹. C and N elemental analyses of the adsorbent (FCPASASG) allowed us to calculate a surface converge of 0.82 mmol g⁻¹. This value compares well with the best values reported for the azo compounds. The adsorbent and its formed metal chelates were characterized by IR (absorbance and/or reflectance) and UV spectrometry, potentiometric titrations and thermogravimetric analysis (TGA and DTG). The mode of chelation between the FCPASASG adsorbent and the investigated metal ions is proposed to be due to reaction of those metal ions with the salicylic and/or the carboxyphenylazo chelation centers of the FCPASASG adsorbent. Nanogram concentrations (0.07–0.14 ng ml⁻¹) of Cd(II), Zn(II), Fe(III), Pb(II), Cr(III), Mn(II), Cu(II), Co(II) and Ni(II) can be determined reliably with a preconcentration factor of 100.     

Studies on the voltammetric behaviour of salicyl fluorone and gallium-salicyl fluorone complex

In the NH₄Cl supporting electrolyte, within the pH range from 1 to 5, an irreversible adsorptive reducing wave of salicyl fluorone(SAF) was obtained. The electrode process was verified as follow: On the surface of mercury electrode, the adsorption of SAF obeys Frumkin isotherm.In 0.2 mol/l potassium hydrogen phthalate/HCl buffer solution, at pH 3.0, the sensitive adsorptive complex wave of Ga-SAF was obtained by linear sweep voltammetry. The composition of the electroactive complex was determined as Ga:SAF = 11. The peak height of the complex is proportional to the concentration of Ga(III) in the range of 1.5 × 10^–9 to 6.0 × 10^–7 mol/l, the detection limit is 1.0× 10^–9 mol/l. The proposed method has been applied to the determination of gallium content in aluminium alloys.     

Determination of Selenium(IV) by Stripping Voltammetry at a Mercury-Film Electrode

A procedure was proposed for the determination of selenium(IV) by stripping voltammetry on a mercury-film electrode at an electrolysis potential of +0.4 V versus the saturated silver–silver chloride reference electrode in a 1 M H₂SO₄ solution. The current of the cathodic peak is a linear function of the selenium(IV) concentration in the range from 5 × 10^–3 to 3 × 10^–1 mg/L (6.3 × 10^–8 to 3.8 × 10^–6 M) at a time of electrolysis of 30 s (t _el). The detection limit for selenium is 1 × 10^–4 mg/L (1.3 × 10^–9 M) at t _el = 300 s. It was shown that selenium(IV) can be determined in the presence of 10 mg/L Zn(II), 1 mg/L Cd(II), 0.5 mg/L Pb(II), and 0.2 mg/L Cu(II). A procedure for the determination of selenium in natural, mineral, and potable water was proposed.     

Coulometric Determination of Chromium(VI) and Copper(II) Present Simultaneously

It was shown that chromium(VI) can be determined by coulometry at a Pt electrode in HNO₃and H₂SO₄solutions. A procedure for the determination of 1–4 mg of chromium in 0.5–1 M HNO₃solutions by controlled-potential coulometry with RSD = 0.2% was developed. It was demonstrated that the degree of the reduction of Cr(VI) to Cr(III) reached 99% (RSD = 0.5%) in the determination of chromium by coulometry at a slow potential sweep (v= 1–2 mV/s) in HNO₃solutions. A procedure was proposed for the determination of Cr(VI) and Cu(II) simultaneously present in 0.25–0.5 M H₂SO₄solutions by controlled-potential coulometry with RSD = 0.3%.     

Study of a bis-furaldehyde Schiff base copper(II) complex as carrier for preparation of highly selective thiocyanate electrodes

A new highly selective thiocyanate electrode based on N,N-bis-(furaldehyde)-1,2-phenylenediamine-dipicolyl copper(II) complex [Cu(II)-BFPD] as neutral carrier is described. The electrode has an anti-Hofmeister selectivity sequence: SCN^–>I^–>Sal^–>ClO₄ ^–>Br^–>NO₂ ^–>Cl^–>NO₃ ^–>SO₄ ^2–>SO₃ ^2–>H₂PO₄ ^– and a near-Nernstian potential linear range for thiocyanate from 1.0×10^–1 to 5.0×10^–6 mol L^–1 with a detection limit 2.0×10^–6 mol L^–1 and a slope of 57.5 mV decade^–1 in pH 5.0 of phosphate buffer solution at 20 °C. The response mechanism is discussed on the basis of results from A.C. impedance measurement and UV spectroscopy. The anti-Hofmeister behavior of the electrode results from a direct interaction between the central metal and the analyte ion and a steric effect associated with the structure of the carrier. The electrode has the advantages of simplicity, fast response, fair stability and reproducibility, and low detection limit. The selectivity of electrodes based on [Cu(II)-BFPD] exceeds that of classical anion-sensitive membrane electrodes based on ion exchangers such as lipophilic quaternary ammonium or phosphonium salts. Application of the electrode for determination of thiocyanate in waste water samples from a laboratory and a gas factory, and in human urine samples, is reported. The results obtained were fair agreement with the results obtained by HPLC.     

Extraction-spectrophotometric determination of chromium with Nitrotetrazolium Blue

The interaction of Cr(VI) and Nitrotetrazolium Blue has been examined. A 12 NTB (CrO₃Cl)₂ ion-associate is formed and is extractable into 1,2-dichloroethane. The optimum conditions have been established. The molar absorptivity at 260 nm was (8.2 ± 0.06) × 10⁴L mol^–1cm^–1. Beer's law was obeyed in the range 0.01–0.4 g ml^–1 Cr(VI). A sensitive and selective method for determination of micro-quantities of Cr(VI) in soils and steels is suggested.     

Membrane electrodes selective for hydrogen phosphate ions

The possibility of using plasticized polyvinyl chloride film membranes with dispersed electroactive substances (MgNH₄PO₄, BiPO₄, and CrPO₄) for developing electrodes selective for hydrogen phosphate ions has been investigated. It is shown that a chromium(III) phosphate-based electrode is characterized by the linearity range KT^-1-KT^-6 M of the hydrogen phosphate function with a slope of 26.5 mV/pc and a satisfactory selectivity in the presence of chloride, nitrate, sulfate, and hydrogen carbonate ions. Presented at the V All-Russian Conference with the Participation of CIS Countries on Electrochemical Methods of Analysis (EMA-99), Moscow, December 6–8, 1999.