Influence of solvents and gas chromatographic injector conditions on the detectability of nitroaromatic compounds

We investigated the influence of four common solvents and of several liner packings of a split/splitless injector on the gas chromatographic behavior of trinitrotoluenes and related nitroaromatic compounds. The highest peaks are observed using toluene in combination with an empty liner or with a prepacked CarboFrit liner. In particular, the peaks of trinitrotoluene isomers and 1,3,5-trinitrobenzene significantly decreased or even totally disappeared when using quartz wool or glass wool, even when treated with dimethylchlorosilane. Similiar peak reductions are obtained with methanol or acetonitrile. Effects of decreasing peak are accompanied by the formation of two additional products when using methanol.     

ESR study of the effects of water,methanol, and ethanol on gamma-irradiation of starch

This investigation deals with the nature and relative abundance of stable radicals formed by gamma-irradiation of wheat starch at room temperature. Additions of equal weights of water, methanol, and ethanol were equally effective in reducing the content of stable radicals in starch which contained about 12% water before the additions. When, however, the starting material was dried starch with 2.9% initial water content additional water and methanol were better radical scavengers than ethanol. This difference is attributed to the superior ability of water and methanol to permeate the starch structure. Superficially different ESR spectra were obtained in products made by irradiating starch and starch that contained added water or methanol. Computer simulation of these spectra showed that they could be matched by superposition of the spectra of the same four component radicals, with some adjustments of relative intensities and peak widths. The structures of these radicals have been dedueed from the spectral assignments and relative effects of the three solvents used on the intensities of the respective ESR spectra.     

Determination of three major triterpenoids in epicuticular wax of cabbage (Brassica oleracea L.) by high-performance liquid chromatography with UV and mass spectrometric detection

Lupeol, together with alpha- and beta-amyrins in smaller quantities, has been found for the first time in the epicuticular wax of white cabbage (Brassica oleracea L. convar. capitata (L.) Alef. var. alba DC) leaf surface extract. The three triterpenoids were identified by a new high-performance liquid chromatographic (HPLC) method with UV and mass spectrometric (MS) detection using atmospheric pressure chemical ionization (APCI). All three isomeric compounds gave a parent ion peak at m/z 409 [M+H-18](+) and the relative intensities of some characteristic fragment ion peaks in tandem mass spectrometric (MS-MS) spectra of this parent ion enabled differentiation between the isomers. An additional peak at m/z 439 [M+H](+), which could be oleanonic or ursonic aldehyde, was detected by HPLC-APCI-MS. Saponification of cabbage leaf surface extract with 20% NaOH in methanol at 65 degrees C for 2h had no influence on lupeol, or alpha- or beta-amyrins, but lead to the formation of three additional compounds, which were not identified.     

Influence of solvent properties on separation and detection performance in non-aqueous capillary electrophoresis-mass spectrometry of basic analytes

The versatility of non-aqueous capillary electrophoresis (NACE) results mainly from the variety of physico-chemical properties of the different solvents. They provide solubility for a wide range of analytes, enable to control electrophoretic selectivity, but affect in some cases UV absorbance detection. The coupling of NACE to electrospray mass spectrometry (ESI-MS) allows to cope with the high UV cut-off of some CE relevant solvents (e.g., formamides). In this paper the pure organic solvents methanol, acetonitrile, dimethylsulfoxide, formamide, N-methylformamide and N,N-dimethylformamide are evaluated against water for the preparation of ammonium acetate electrolytes to separate the basic model substances 2-aminobenzimidazole, procaine, propranolol and quinine with NACE-MS. MS coupling is assisted with the sheath liquid water-isopropanol (1:4, v/v) with 0.1% formic acid. The goal of the paper is to assess the influence of the solvent on selectivity, separation speed, and peak efficiency for a given set of model compounds on a simple empirical basis. It should give the user an idea how the separation quality is changed when nothing but the running solvent is altered. The obtained efficiency results were discussed with respect to physico-chemical models described in literature (assuming longitudinal diffusion as the only source of band broadening), but no satisfying correlations with solvent properties could be traced. The feasibility of all six organic solvents for MS coupling was demonstrated and the influence of the separation solvent on the MS detection performance was compared. In the seven different solvents, the shortest run time was obtained with acetonitrile, the best peak resolution with the amphiprotic solvents (especially methanol) best peak efficiency with methanol and formamide, and the most sensitive ESI-MS detection with acetonitrile and methanol, but with only slight advantage to water.     

Role of solvents in stability of collagen

The influence of hydroxymethyl chain length of the solvents on collagen was established with conformational stability and thermal stability. Thermal stability of monomeric collagen and RTT fibres (rat tail tendon) treated with methanol, ethylene glycol (EG) and glycerol were reported using the melting temperature for helix-coil transition and the peak temperature for collagen-gelatin transition. Both melting temperature and peak temperature increases as the hydroxymethyl chain length increases. Conformational stability of collagen solution treated with lower and higher concentrations of methanol, ethylene glycol and glycerol indicates that aggregation of collagen molecule is more at higher concentrations of these solvents. The concentration dependence is greater for the increased number of OH groups. Since protein aggregation is associated with neuro degenerative diseases, aggregation of collagen molecule in the presence of solvents is of great importance for biomedical application.     

Non-aqueous capillary electrophoresis with red light emitting diode absorbance detection for the analysis of basic dyes

Non-aqueous capillary electrophoresis was evaluated for the separation of five hydrophobic basic blue dyes for application in forensic dye analysis. The use of a red light emitting diode as a high intensity, low-noise light source provided sensitive detection of the blue dyes while also allowing the evaluation of solvents that absorb strongly in the UV region. Excellent peak shapes and separation selectivity were obtained in methanol, ethanol, acetonitrile and dimethylsulfoxide, however water, tetrahydrofuran, dimethylformamide and acetone were unsuitable as solvents due to poor peak shapes and a lack of sensitivity, most likely due to adsorption onto the capillary wall. Due to the known compatibility of methanol with capillary electrophoresis–mass spectrometry, this solvent was examined further with the relative acidity/basicity of the electrolyte being optimised with an artificial neural network. The optimised method was examined for the separation of ink samples from 6 fibre tip and 2 ball point blue or black pens and showed that a unique migration time for the main dye component in seven of the eight pens could be obtained.     

Ultrafast excited state dynamics of fucoxanthin: excitation energy dependent intramolecular charge transfer dynamics

Carotenoids containing a carbonyl group in conjugation with their polyene backbone are naturally-occurring pigments in marine organisms and are essential to the photosynthetic light-harvesting function in aquatic algae. These carotenoids exhibit spectral characteristics attributed to an intramolecular charge transfer (ICT) state that arise in polar solvents due to the presence of the carbonyl group. Here, we report the spectroscopic properties of the carbonyl carotenoid fucoxanthin in polar (methanol) and nonpolar (cyclohexane) solvents studied by steady-state absorption and femtosecond pump-probe measurements. Transient absorption associated with the optically forbidden S(1) (2(1)A) state and/or the ICT state were observed following one-photon excitation to the optically allowed S(2) (1(1)B) state in methanol. The transient absorption measurements carried out in methanol showed that the ratio of the ICT-to-S(1) state formation increased with decreasing excitation energy. We also showed that the ICT character was clearly visible in the steady-state absorption in methanol based on a Franck-Condon analysis. The results suggest that two spectroscopic forms of fucoxanthin, blue and red, exist in the polar environment.     

Peak half-width plots to study the effect of organic solvents on the peak performance of basic drugs in micellar liquid chromatography

The addition of the anionic surfactant sodium dodecyl sulphate (SDS) to hydro-organic mixtures of methanol, ethanol, propanol or acetonitrile with water yielded enhanced peak shape (i.e. increased efficiencies and symmetrical peaks) for a group of basic drugs (β-blockers) chromatographed with a Kromasil C18 column. The effect can be explained by the thin layer of surfactant associated to the hydrocarbon chain on the stationary phase in the presence of the organic solvents, which covers the free silanols on the siliceous support avoiding their interaction with the cationic basic drugs. These instead interact with the anionic head of the surfactant increasing their retention and allowing a more facile mass transfer. The peak shape behaviour with the four organic solvents (methanol, ethanol, propanol and acetonitrile) was checked in the presence and absence of SDS. The changes in peak broadening rate and symmetry inside the chromatographic column were assessed through the construction of peak half-width plots (linear relationships between the left and right half-widths at 10% peak height versus the retention time). The examination of the behaviour for a wide range of compositions indicated that the effect of acetonitrile in the presence of SDS is different from ethanol and propanol, which behave similarly. Acetonitrile seems to be superior to the alcohols in terms of peak shape, which can be interpreted by the larger reduction in the adsorbed surfactant layer on the C18 column. However, the decreased efficiencies observed at increasing surfactant concentration in the mobile phase should be explained by the reduction in retention times, more than by a change in the stationary phase nature.     

Solute–Solvent Interactions of Methyl Violet in Different Solvents on Spectral Data

Spectroscopic studies of Methyl violet in protic (water, methanol, ethanol, isopropanol and n-butanol) and aprotic solvents (acetone, DMF) were carried out. UV-Visible absorption spectra of Methyl violet in protic solvents showed a hypsochromic shift, as the solvent polarity was changed from less polar to more polar, while a bathochromic shift was observed for aprotic solvents. Transition energy of Methyl violet in different solvents was correlated with solvatochromic parameters to study solute–solvents interactions. The Kamlet–Taft, Catalan and unified scale models were applied to investigate interactions between Methyl violet and solvents. The best agreement is found for the Catalan model.     

不同极性的临界介质对孔道中甲醇的脱附和萃取作用

针对临界溶剂对多孔介质中甲醇的脱附和萃取作用，利用Monte Carlo (MC)方法考察了溶剂的分子结构与外在因素（孔道尺寸）对甲醇合成过程的影响。研究表明，极性溶剂丙酮能够促进甲醇脱附，而非极性溶剂正庚烷对孔道中甲醇有更强的萃取能力。在一定范围内，随孔道尺寸的增加，溶剂对甲醇的脱附能力增加，但对孔道中甲醇的萃取能力却减弱。     

Thermo-oxidative degradation of ultrahigh molecular weight poly(ethylene oxide) in volatile organic solvents

The degradation of ultrahigh molecular weight poly(ethylene oxide) (UHMWPEO) was investigated in three volatile organic solvents, methanol, chloroform, and tetrahydrofuran. Particularly, degradation rate was determined by means of Ubbelohde viscometry and degradation products were characterized by using electron spin resonance spectroscopy (ESR) and Fourier transform infrared spectroscopy (FTIR). The highest degradation rate was observed for UHMWPEO in tetrahydrofuran, with the lowest one in methanol. The ESR results showed that PEO-C• and •OH radicals were produced during the degradation process. Among these selected solvents, tetrahydrofuran was found to generate free radicals through an autoxidation mechanism. This would accelerate the degradation of UHMWPEO, resulting in the observed highest degradation rate in the UHMWPEO/tetrahydrofuran solution. Esters were also detected in the degradation products of these UHMWPEO solutions, while formates and formate ions were generated in the solutions of UHMWPEO/tetrahydrofuran and UHMWPEO/cloroform except for PEO/methanol. Furthermore, the degradation mechanism of UHMWPEO was deduced. This work enabled an in-depth understanding on the thermo-oxidative degradation mechanism of UHMWPEO in representative organic solvents, which would be instructive for developing optimal solution-based processing technique of UHMWPEO.     

AN EXAMPLE OF HOW PHOTOPHYSICAL PROPERTIES CAN INFLUENCE THE MAGNITUDE OF SOLVENT ISOTOPE EFFECTS UPON PHOTO-OXIDATION REACTIONS

Abstract Substantial isotope effects have been observed for the dye sensitised photo-oxidation of 1,3-diphenyl-2-pyrazoline in both polar and non polar solvents, implicating singlet oxygen as a reactive intermediate. By way of contrast, a solvent isotope effect upon the direct photo-oxidation of the pyrazoline was only observed when a protic solvent (methanol) was used. It was found that the photophysical properties (e.g. quantum yields and fluorescence lifetimes) of pyrazolines are sensitive to the isotopic composition of protic solvents but not aprotic solvents. The solvent isotope effect observed for the direct photo-oxidation reaction in methanol may not therefore be a true indication of the participation of singlet oxygen. Since this reaction may not be singlet oxygen mediated, an alternative mechanism is proposed.     

果菠萝蛋白酶在有机溶剂微扰时的分子折叠与活力变化的研究

本文用荧光、紫外差示及CD光谱研究果菠萝蛋白酶经甲醇、乙醇、乙二醇微扰后的构象与活力变化情况.酶的荧光强度随有机溶剂浓度增大而增强,表明Tyr、Trp微环境发生明显变化。232nm和285nm处出现紫外差吸收正峰。前峰与酶分于折叠的变化有关,而后峰与Tyr、Trp微环境的变化相关.甲醇、乙醇微扰后,天然酶的208nm和225nmCD双负峰逐渐加强,而乙二醇微扰后,225nm负峰加强。208nm负峰减弱并红移直至完全消失,说明酶分子完全伸展.     

The effect of solvents and polyethylene glycol on the synthesis of linear and cyclic poly(methylene sulfide)

The condensation polymerization of sodium sulfide with methylene chloride in various solvents was studied in order to assess the influence of polarity on the yield and composition of condensation products. The effect of addition of polyethylene glycol was also studied. It has been found that the overall yield of polythiomethylenes rises from 13.9% in methanol to 85.2% (methanol, PEG15000). The use of solvents of higher polarity promotes the linear oligomers, whereas in methanol the cyclic products predominate. In presence of PEG the this equilibrium is shifted towards tetrathiane. The observed phenomena are discussed in terms of solvents polarity and reaction media viscosity. © 1996 John Wiley & Sons, Inc.     

顶空气相色谱法同时测定托比司他中的6种残留溶剂

采用顶空气相色谱技术,建立了同时测定托比司他中6种残留溶剂的方法。考察了不同固定相对分离效果的影响,优化了平衡加热时间影响以及制样溶剂。在优化的实验条件下,采用Rtx-200型聚三氟丙基甲基硅氧烷为固定相的色谱柱(30 m ×0.25 mm ×1μm)分离、氢火焰离子化检测器检测、外标法定量的分析方案,实现了甲醇、乙醇、二氯甲烷、乙酸乙酯、1,4-二氧六环和吡啶6种残留溶剂的同时分离与测定。6种溶剂在各自的线性范围内线性关系良好,线性相关系数( R2)均大于0.998,定量限分别为甲醇0.006%、乙醇0.005%、二氯甲烷0.012%、乙酸乙酯0.0025%、1,4-二氧六环0.0076%、吡啶0.004%。在3个添加水平下,6种残留溶剂的加标回收率在92.3%~100.3%之间,相对标准偏差为0.3%~3.6%。实际样品分析结果表明,本方法简单、快速、分离效果好,可用于托比司他中6种残留溶剂的检测。     

Fluorescence studies of selected 2-alkylaminopyrimidines

The reactions of 2-chloropyrimidine with methylamine, ethylamine and piperidine gave the corresponding 2-N-methylamino-, 2-N-ethylamino- and 2N- piperidinopyrimidines, respectively. The fluorescence properties of these alkylamino derivatives in chloroform, ethyl acetate, carbon tetrachloride, acetone, ether, ethanol and methanol were studied. All the alkylamino derivatives showed the highest fluorescence intensity in polar protic solvents; thus 2-N-methylaminopyrimidine (highest fluorescence intensity at 377 nm when excited at 282 nm) and 2-N-ethylaminopyrimidine (highest fluorescence intensity at 375 nm, when excited at 286 nm) showed the highest fluorescence in methanol. In ethanol, 2-N-piperidinopyrimidine showed a fluorescence peak at 403 nm when excited at 360 nm and in chloroform it fluoresced at 392 nm when excited at 356 nm.     

Coloring-decoloring behavior of amphiphilic fluoroalkyl end-capped N-(1,1-dimethyl-3-oxobutyl)acrylamide--acryloylmorpholine cooligomer/fluorescein nanocomposites in protic and aprotic solvents

Amphiphilic fluoroalkyl end-capped N-(1,1-dimethyl-3-oxobutyl)acrylamide-acryloylmorpholine cooligomer/fluorescein nanocomposites afforded brilliant yellow-colored solutions in not only protic solvents such as methanol and ethanol but also protic-like solvents such as dichloromethane and 1,2-dichloroethane, respectively. However, the corresponding non-fluorinated cooligomer/fluorescein composites and parent fluorescein gave the colorless solutions under similar conditions. On the other hand, unexpectedly, such brilliant yellow-colored solutions provided by these fluorinated nanocomposites completely disappeared in aprotic solvents such as N,N-dimethylformamide, dimethyl sulfoxide, and tetrahydrofuran. Thus, these fluorinated fluorescein nanocomposites can exhibit a coloring-decoloring behavior through solvatochromic response.     

Parameterising matrix-assisted laser desorption/ionization (MALDI): effect of solvents and co-additives on analyte peak intensities

The peak intensities obtained when 2,5-dihydroxybenzoic acid (DHB) was used as a 'classic' matrix were measured using substance P (SP) and betacyclodextrin (BCD) as analytes. Enhancements in peak intensities were observed going from 1:1 MeOH/H2O to dimethylforamide (DMF) as matrix solvents. Also non-covalent interactions between SP and solvent and DHB were observed suggesting close interactions between matrix, solvent and analyte in the gas-phase. Peak enhancements were previously reported with 'superDHB' (DHB and 2-hydroxy-5-methoxybenzoic acid at 10% v/v). Co-addition of structural analogues and their respective absorption coefficients were determined. It was found that other analogues used as co-matrices could give analyte peak enhancement similar to reported for sDHB with the additional benefit that some analogues could act as matrices with DHB addition. No direct correlation was observed between absorption coefficient and the ability of the molecule to act as a 'good' UV MALDI matrix.     

Conformation of adsorbed layers of polyNIPAM on silica in a binary solvent

The conformation of poly( N-isopropylacrylamide) chains adsorbed at a silica interface was studied as a function of concentration in the methanol-water binary solvent mixture. Both water and methanol are good solvents for PNIPAM; however, in certain mixtures cononsolvency is induced by a lowering of the LCST. This led to a decrease in the extent of the PNIPAM layer away from the interface as measured using the colloidal probe technique in the poor solvent region. At low methanol concentrations but still in the good solvent region capillary bridging between the silica surfaces with adsorbed PNIPAM layers was observed due to the increased methanol concentration in this interfacial region over that of the bulk. Furthermore, adsorption measurements showed that PNIPAM adsorbed only weakly to the silica interface with a low surface excess on the order of 0.23 mg/m (2), which allowed study of the behavior of the immobilized PNIPAM chains under highly dilute conditions using the quartz crystal microbalance. As the concentration of methanol increased toward the phase transition boundary, a slight contraction followed by an expansion of the PNIPAM was observed, which is in agreement with previous predictions from theory for polymers in solution.     

Sample Solvent as Analyte in High Performance Liquid Chromatography

Abstract

Solvents vary in their behavior in high performance liquid chromatography (HPLC). Water and methanol, among others, are widely used in the mobile phase as well as solvents for the solute. Few reports indicate that the solvent used for the solute can behave as an analyte. Normally, it is generally accepted that the solute solvent, a non-constituent of the mobile phase will be the first eluent. However, a solvent which is a component of the sample can show up as an unexpected peak with its own identity. This solvent may show a similar retention time as some of the unknown components of the sample. This indicates that in some cases the quantitative results may be the sum of the absorptivity of the solute and solvent used for the sample. It is assumed that some solvents show no absorption in the ultraviolet region at which the analysis is being conducted. Depending on the mobile phase composition some solvents can be detected at the wavelengts or wavelengths used for analysis. Water, ethylacetate, and methanol showed absorption at 210 nm when present in the sample being analyzed with a mobile phase of acetonitrile-methanol using a C₁₈ column. These solvents overlapped or showed retention times the same as estriol and testosterone.