Hydrogen diffusion in the elastic fields of dislocations in iron

The effect of dislocation stress fields on the sink efficiency thereof is studied for hydrogen interstitial atoms at temperatures of 293 and 600 K and at a dislocation density of 3 × 10¹⁴ m^–2 in bcc iron crystal. Rectilinear full screw and edge dislocations in basic slip systems 〈111〉{110}, 〈111〉{112}, 〈100〉{100}, and 〈100〉{110} are considered. Diffusion of defects is simulated by means of the object kinetic Monte Carlo method. The energy of interaction between defects and dislocations is calculated using the anisotropic theory of elasticity. The elastic fields of dislocations result in a less than 25% change of the sink efficiency as compared to the noninteracting linear sink efficiency at a room temperature. The elastic fields of edge dislocations increase the dislocation sink efficiency, whereas the elastic fields of screw dislocations either decrease this parameter (in the case of dislocations with the Burgers vector being 1/2〈111〉) or do not affect it (in the case of dislocations with the Burgers vector being 〈100〉). At temperatures above 600 K, the dislocations affect the behavior of hydrogen in bcc iron mainly owing to a high binding energy between the hydrogen atom and dislocation cores.     

The gauge theory of dislocations: A nonuniformly moving screw dislocation

We investigate the nonuniform motion of a straight screw dislocation in infinite media in the framework of the translational gauge theory of dislocations. The equations of motion are derived for an arbitrarily moving screw dislocation. The fields of the elastic velocity, elastic distortion, dislocation density and dislocation current surrounding the arbitrarily moving screw dislocation are derived explicitly in the form of integral representations. We calculate the radiation fields and the fields depending on the dislocation velocities.     

On the non-uniform motion of dislocations: the retarded elastic fields,the retarded dislocation tensor potentials and the Liénard–Wiechert tensor potentials

The topic of this paper is the fundamental theory of the non-uniform motion of dislocations in two and three space dimensions. We investigate the non-uniform motion of an arbitrary distribution of dislocations, a dislocation loop and straight dislocations in infinite media using the theory of incompatible elastodynamics. The equations of motion are derived for non-uniformly moving dislocations. The retarded elastic fields produced by a distribution of dislocations and the retarded dislocation tensor potentials are determined. New fundamental key formulae for the dynamics of dislocations are derived (Jefimenko type and Heaviside–Feynman type equations of dislocations). In addition, exact closed-form solutions of the elastic fields produced by a dislocation loop are calculated as retarded line integral expressions for subsonic motion. The fields of the elastic velocity and elastic distortion surrounding the arbitrarily moving dislocation loop are given explicitly in terms of the so-called three-dimensional elastodynamic Liénard–Wiechert tensor potentials. The two-dimensional elastodynamic Liénard–Wiechert tensor potentials and the near-field approximation of the elastic fields for straight dislocations are calculated. The singularities of the near-fields of accelerating screw and edge dislocations are determined.     

On the elastic fields produced by non-uniformly moving dislocations: a revisit

We investigate the non-uniform motion of straight dislocations in infinite media using the theory of incompatible elastodynamics. The equations of motion are derived for non-uniformly moving screw dislocations, gliding edge and climbing edge dislocations. The exact closed-form solutions of the elastic fields are calculated. The fields of the elastic velocity and elastic distortion surrounding the arbitrarily moving dislocations are given explicitly in the form of integral representations free of non-integrable singularities. The elastic fields describe the response in the form of non-uniformly moving elastic waves caused by the motion of the dislocation.     

Dislocation and stacking fault core fields in fcc metals

Atomistic models were used to determine the properties of dislocation core fields and stacking fault fields in Al and Cu using embedded atom method (EAM) potentials. Long-range, linear elastic displacement fields due to nonlinear behaviour within dislocation cores, the core field, for relevant combinations of Shockley partial dislocations for edge, screw, and mixed (60° and 30°) geometries were obtained. Displacement fields of stacking faults were obtained separately and used to partition the core field of dissociated dislocations into core fields of partial dislocations and a stacking fault expansion field. Core field stresses were derived from which the total force, including the Volterra field plus core field, between dislocations for several dislocation configurations was determined. The Volterra field dominates when the distance between dislocations exceeds about 50b but forces due to core fields are important for smaller separation distances and were found to affect the equilibrium angle of edge dislocation dipoles and to contribute to the force between otherwise non-interacting edge and screw dislocations. Interactions among the components of a dissociated dislocation modify the equilibrium separation for Shockley partials suggesting that methods that determine stacking fault energies using measurements of separation distances should include core fields.     

Collective excitations in an array of compensated dislocations

Collective vibrational excitations that arise in an array of compensated dislocations because of long-range elastic fields related to nonuniform dislocation polarization are considered. Dispersion relations are derived analytically. It is shown that there are two, for screw dislocations, and three, for edge dislocations, branches of collective excitation. In both cases, one of the branches is characterized by a threshold frequency depending on the dislocation density.     

GENERALIZATION OF ESHELBY''S METHOD TO THE ANISOTROPIC ELASTICITY THEORY OF DISLOCATIONS IN QUASICRYSTALS

The general expressions of the elastic fields induced by straight dislocations in quasicrystals have been given according to Eshelby's method which was used to treat the anisotropic elasticity of dislocations in crystals. As an example, the elastic displacement vector, the stress tensor and the elastic energy density of a screw dislocation line lying on the quasiperiodic plane of decagonal quasicrystals are calculated.     

GENERALIZATION OF ESHELBY'S METHOD TO THE ANISOTROPIC ELASTICITY THEORY OF DISLOCATIONS IN QUASICRYSTALS

The general expressions of the elastic fields induced by straight dislocations in quasicrystals have been given according to Eshelby's method which was used to treat the anisotropic elasticity of dislocations in crystals. As an example, the elastic displacement vector, the stress tensor and the elastic energy density of a screw dislocation line lying on the quasiperiodic plane of decagonal quasicrystals are calculated.     

Interbranch scattering of an X-ray wave field in a strongly distorted region of the elastic field around a dislocation

The case of a diffraction image of screw dislocations arranged parallel to the surface of a specimen has been studied experimentally and by methods of computer simulation. Special features of scattering of an X-ray wave field in a strongly distorted region near the dislocation core have been considered. It has been shown that the diffraction image in the vicinity of the defect is formed due to a superposition of new wave fields generated at each point of the elastic field around a dislocation with the existing fields.     

Equilibrium and passing properties of dislocation dipoles

Static and dynamic properties of dislocation dipoles are investigated under isotropic and anisotropic elasticity. In elastically isotropic systems for a dislocation character between 35 and 40°, a dipole assumes the same stress-free equilibrium angle of 90° as the screw dipole. This can be affected by elastic anisotropy, as in Cu where the equilibrium angle assumed by a screw dipole (≈59°) is unchanged up to a dislocation character of 22°. In contrast, the static properties of near-edge dislocation dipoles are little influenced by elastic anisotropy. Certain dipole passing properties, not the passing stress however, are also modified by elastic anisotropy. For large heights and/or in the case of undissociated dislocations, the minimum passing stress corresponds to a dipole character of ～60° and it exhibits a sharp maximum in screw orientation. Reasonably moderate dislocation reorientations should facilitate the passing of near-screw dislocations in fatigue channels. Within a certain range of applied stresses, the passing of dipoles, comprised of unlike attractive dislocations, is accompanied by the sweeping of one dislocation by the other over a limited distance. Dissociation plays a prominent role in determining both static and dynamic properties for dipole heights less than a few times the dissociation distance of an isolated dislocation.     

Screening of the elastic field in a dislocation ensemble

The phenomenon of screening of the elastic field of screw dislocations is investigated on the basis of a system of self-consistent field equations for a dislocation ensemble. Expressions are derived for the effective dislocation interaction potential, the screening length, and the average elastic field energy associated with the correlation interaction of dislocations. An expression for the correlation dislocation flux is formulated in the slightly inhomogeneous case. Fiz. Tverd. Tela (St. Petersburg) 39, 1575–1579 (September 1997)     

Screw dislocations in the field theory of elastoplasticity

A (microscopic) static elastoplastic field theory of dislocations with moment and force stresses is considered. The relationship between the moment stress and the Nye tensor is used for the dislocation Lagrangian. We discuss the stress field of an infinitely long screw dislocation in a cylinder, a dipole of screw dislocations and a coaxial screw dislocation in a finite cylinder. The stress fields have no singularities in the dislocation core and they are modified in the core due to the presence of localized moment stress. Additionally, we calculated the elastoplastic energies for the screw dislocation in a cylinder and the coaxial screw dislocation. For the coaxial screw dislocation we find a modified formula for the so‐called Eshelby twist which depends on a specific intrinsic material length.     

Shielding effect and emission criterion of a screw dislocation near an interfacial blunt crack

Shielding effect and emission criterion of a screw dislocation near an interfacial blunt crack are dealt with in this paper. Utilizing the conformal mapping technique, the closed-form solutions are derived for complex potentials and stress fields due to a screw dislocation located near the interfacial blunt crack. The stress intensity factor on the crack tips and the critical stress intensity factor for dislocation emission are also calculated. The influence of the orientation of the dislocation and the morphology of the blunt crack as well as the material elastic dissimilarity on the shielding effect and the emission criterion is discussed in detail. The results show that positive screw dislocations can reduce the stress intensity factor of the interfacial blunt crack tip (shielding effect). The shielding effect increases with the increase of the shear modulus of the lower half-plane, but it decreases with the increase of the dislocation azimuth angle. The critical loads at infinity for dislocation emission increases with the increase of emission angle and curvature radius of blunt crack tip, and the most probable angle for screw dislocation emission is zero. The present solutions contain previous results as special cases.     

Non-singular dislocation continuum theories: strain gradient elasticity vs. Peierls–Nabarro model

Abstract

Non-singular dislocation continuum theories are studied. A comparison between Peierls–Nabarro dislocations and straight dislocations in strain gradient elasticity is given. The non-singular displacement fields, non-singular stresses, plastic distortions and dislocation core shapes are analysed and compared for the two models. The main conclusion of this study is that due to their characteristic properties, the non-singular displacement fields, non-singular stresses and dislocation core shape of screw and edge dislocations obtained in the framework of strain gradient elasticity are more realistic and physical than the corresponding fields of the Peierls–Nabarro model. Strain gradient elasticity of dislocations is a continuum dislocation theory including a weak non-locality within the dislocation core and predicting the size and shape of the dislocation core. The dislocation core is narrower in the strain gradient elasticity dislocation model than in the Peierls–Nabarro model and more evenly distributed in two dimensions. The present analysis shows that for the modelling of the dislocation core structure the non-singular dislocation fields of strain gradient elasticity are the suitable ones.     

Self-consistent dynamics of an ensemble of screw dislocations during plastic deformation of crystals

A system of self-consistent field equations is formulated for an ensemble of continuously distributed screw dislocations. Rapid relaxation of dislocation charges owing to the elastic interaction of the dislocations leads to a diffusive ensemble dynamics. The conditions for development of an instability in the homogeneous state are determined. Self-organization of the dislocations and their spatial ordering are described in the two-dimensional case. Fiz. Tverd. Tela (St. Petersburg) 39, 1066–1071 (June 1997)     

磁电弹性体中多条位错与Griffith裂纹

根据本征方程，研究磁电弹性体中若干平行螺型位错与Griffith裂纹的相互作用.结合Muskhelishvili方法和算子理论，得到磁电弹性体中由位错和裂纹所诱导的应力场、电场和磁场的解析解.数值算例表明：在裂纹的端点及位错点上仍然存在应力的奇异性，离位错点越远处广义力越小，结论与已有的结果相符，证明了结论的正确性.当位错点与裂纹端点距离越近时，裂纹与位错间的应力场越小，并逐渐趋近于零.     

Interactions of glide dislocations in a channel of a persistent slip band

Two unlike dislocations gliding in parallel slip planes in a channel of a persistent slip band are considered. Initially they are kept apart in straight screw positions. As the dislocations are pushed by the applied stress between two walls in the opposite directions, they bow out and attract one another forming a dipole. With the increasing stress the dislocations become more and more curved, until they separate. The walls of the channel are represented by elastic fields of rigid edge dipoles. The dislocations are modelled as planar curves approximated by moving polygons. The objective of the simulations is to determine the stress in the channel needed for the dislocations to escape one another. The stress and strain controlled regimes considered provide upper and lower estimates of the escape stress. The results are compared with the studies by Mughrabi and Pschenitzka, and Brown and the recent dislocation dynamics estimates. Problems encountered in the dislocation dynamics evaluation of the escape stress are analyzed.     

求晶体位错自能的离散弹性方案

考虑到晶体的离散点阵结构,滑移只能在原子之间进行,因此位错中心永远没有原子,位错中心附近分摊到每个原子的离散弹性能量处处有限。在刚性位错假定下,直接应用位错弹性理论解析结果,求出了晶体直奇异位错等效内切半径及其随位错中心位置的周期变化。对于简单四方晶体中奇异螺型位错,一级近似与Peierls模型结果巧合。计算了fcc和bcc两种晶系中各种位错的自能和等效位错内切半径,并初步考虑了各向异性弹性效应。结果表明:位错滑移面不是几何平面,bcc螺型位错滑移面类似于蜂巢结构。指出了用这种离散弹性方法进一步估算各种次级效应的可能。 关键词：     

Dislocation and disclination loops in the virtual-defect method

A method of virtual circular defect loops is developed for determining the elastic fields produced by defects in a bounded medium in the case of an axially symmetric geometry. In this method, continuously distributed virtual circular Volterra and Somigliana dislocation loops are adjusted in such a way as to satisfy the boundary conditions imposed at free surfaces and interfaces. Original calculations of the elastic fields of circular defect loops of different types are carried out. The elastic fields are found for the case of straight dislocations and disclinations in a plate that are perpendicular to the plate plane and for the case of circular disclination loops parallel to the plate plane or to an interface.     

Section images of dislocations normal to the surface of a 6H-SiC single crystal

Section topographs of edge and screw dislocations with an axis along [0001] in 6H-SiC are taken and interpreted, and the image formation is explained for this case. The contrast induced by various arrangements of dislocations within the Borrmann triangle is experimentally studied. The sign of the Burgers vector of an edge or screw dislocation normal to the crystal surface is shown to be unambiguously determined from the section-topograph image of this dislocation. The sign of the Burgers vector of a screw dislocation can also be determined from its image taken with Lang projection topography. The contribution of a long-range strain field to the section images of edge and screw dislocations normal to the crystal surface is revealed. The experimental contrasts recorded using section topography and Borrmann-effect-based topography are compared.