Synthesis,characterization and potential applications of new materials in the mesoporous range

M41S is the designation of a new type of mesoporous structures. The characteristics of these materials are large surface areas and very narrow pore size distributions, with pore diameters tunable from 15 to 100 Å. The M41S family consists of MCM-48, which has a cubic ordered pore structure, MCM-41, which has a hexagonally ordered pore structure and MCM-50, which has an unstable lamellar structure. In this review we cover the synthesis, modification, characterization and potential applications of these materials.     

Gas diffusion and microstructural properties of ordered mesoporous silica fibers

Pore and surface diffusion of carbon dioxide (CO(2)) and ethylene (C(2)H(4)) in the nanopores of ordered mesoporous silica fibers about 200 microm in length was measured by the transient gravimetric method. The experimentally determined pore diffusivity data, coupled with the porosity, pore size, and fiber length, are used to obtain the actual length of the nanopores in silica fibers. These measurements reveal a structure of the ordered nanopores whirling helically around the fiber axis with a spiral diameter of about 15 microm and a pitch value of 1.6 microm. At room temperature the surface diffusion contributes about 10% to the total diffusional flux for these two gases in the nanopores of the ordered mesoporous silica fibers. The surface diffusion coefficients for the ordered mesoporous silica fibers are about 1 order of magnitude larger than the non-ordered mesoporous alumina or silica with similar pore size.     

Triconstituent co-assembly to ordered mesostructured polymer-silica and carbon-silica nanocomposites and large-pore mesoporous carbons with high surface areas

Highly ordered mesoporous polymer-silica and carbon-silica nanocomposites with interpenetrating networks have been successfully synthesized by the evaporation-induced triconstituent co-assembly method, wherein soluble resol polymer is used as an organic precursor, prehydrolyzed TEOS is used as an inorganic precursor, and triblock copolymer F127 is used as a template. It is proposed for the first time that ordered mesoporous nanocomposites have "reinforced concrete"-structured frameworks. By adjusting the initial mass ratios of TEOS to resol, we determined the obtained nanocomposites possess continuous composition with the ratios ranging from zero to infinity for the two constituents that are "homogeneously" dispersed inside the pore walls. The presence of silicates in nanocomposites dramatically inhibits framework shrinkage during the calcination, resulting in highly ordered large-pore mesoporous carbon-silica nanocomposites. Combustion in air or etching in HF solution can remove carbon or silica from the carbon-silica nanocomposites and yield ordered mesoporous pure silica or carbon frameworks. The process generates plenty of small pores in carbon or/and silica pore walls. Ordered mesoporous carbons can then be obtained with large pore sizes of approximately 6.7 nm, pore volumes of approximately 2.0 cm(3)/g, and high surface areas of approximately 2470 m(2)/g. The pore structures and textures can be controlled by varying the sizes and polymerization degrees of two constituent precursors. Accordingly, by simply tuning the aging time of TEOS, ordered mesoporous carbons with evident bimodal pores at 2.6 and 5.8 nm can be synthesized.     

Fabrication of large-scale zinc oxide ordered pore arrays with controllable morphology

The fabrication of large-scale ZnO ordered pore arrays by the potentiostatic electrochemical deposition method based on a two-dimensional ordered colloidal monolayer template is reported. The pore morphology evolves from hemispherical to a well-like structure by controlling the deposition potential.     

Evaluation of pore size distribution in boundary region of micropore and mesopore using gas adsorption method

This paper discusses an accurate method of pore size distribution evaluation in boundary regions of micropores and mesopores using the gas adsorption process on the basis of the capillary condensation theory, which is liable to be underestimated with the existing BJH and DH methods. A typical nitrogen adsorption isotherm for highly ordered mesoporous silica, which has cylindrical pores with diameter smaller than 4 nm, is considered to be type IV and it is well known for the steep increase of the amount adsorbed through capillary condensation in the region of the relative pressure P/P0 smaller than 0.4. In calculating the distribution of the pore size from the change of the amount adsorbed due to capillary condensation, it is important to accurately predict both the multilayer thickness t of the adsorbed nitrogen molecules and the critical radius rc where capillary condensation occurs. It is necessary to consider the curvature of the adsorption layer-gas phase interface when predicting the multilayer thickness t of nitrogen adsorbed within the pore of highly ordered mesoporous silica. Revision of the Kelvin equation is also required when rc is to be predicted. While the predicted value of t based on the Broekhoff and de Boer theory is matched well with the value of t which is actually measured using highly ordered mesoporous silica, and the predicted value of rc based on the GTKB-Kelvin-cylindrical equation that has been revised considering the effect of the interfacial curvature on the interfacial tension of the adsorption layer-gas phase interface is matched with the value of rc which is actually measured using highly ordered mesoporous silica. A combination method of the Broekhoff and de Boer equation and the GTKB-Kelvin-cylindrical equation is proposed as a means of accurately evaluating, from the nitrogen adsorption isotherm, the pore size distribution in the highly ordered mesoporous silica in boundary region of micropore and mesopore. The proposed new method of pore size evaluation features high accuracy and offers the convenience of obtaining the pore size distribution without repeated calculations by employing the same algorithm as DH method. The pore size predicted by the Halsey equation and the Kelvin equation of the conventional DH method is about 20% smaller than the pore size predicted by the newly proposed evaluation method.     

Ordered porous carbon with tailored pore size for electrochemical hydrogen storage application

Ordered porous carbon with tailored pore size represents an innovative concept in electrochemical hydrogen storage. This work deals with physical characteristics and electrochemical hydrogen storage behavior of the ordered porous carbons with well-tailored pore size, synthesized by a replica technique using hexagonal mesoporous silica as templates. By using a mixture of two surfactants (HTAB and C16EO8) at different ratios, it is possible to control the wall thickness of silica and, consequently, the pore diameter of carbons within a narrow range of 2.1-2.8 nm. In addition, highly developed ultramicroporosity (pore size smaller than 0.7 nm), which plays a predominant role in hydrogen storage, can be produced in the ordered porous carbons. A discharge capacity of up to 527 mAh/g (corresponding to 1.95 wt % hydrogen storage) has been achieved in 6 M KOH for the ordered porous carbon. Furthermore, the ordered porous carbons also possess excellent capacity retainability after charge-discharge cycles and rate capability.     

Synthesis of an ordered porous carbon with the dual nitrogen-doped interfaces and its ORR catalysis performance

Both nitrogen-doping feature and pore structure are critical factors for developing nitrogen-doped carbons based catalysts with a high performance toward oxygen reduction reaction(ORR).Herein,a simple one-step CVD of acetylene and acetonitrile vapor method using silanized SBA-15 as a template has been developed to synthesize an ordered porous carbon(OPC) with dual nitrogen-doped interfaces.The optimized sample as prepared with the CVD of 4 h at 750℃ contains two types of ordered mesopores that one type is the ordered cylindrical pores inheriting from the pores of SBA-15 and has a pore width of4.0~5.0 nm,the other type is the ordered quasi-hexagonal pores with a width of 3.0~4.0 nm produced by etching the pore walls of SBA-15.These two types of pores whose pore walls are built by the nitrogen doped carbon layers resulted by the CVD and thus it actually makes the dual nitrogen-doped interfaced OPC(DN-OPC).Meanwhile,DN-OPC contains a few of micropores and a large SSA of 1430 m~2/g.This dualordered pores and dual nitrogen-doped interfaces cannot only facilitate mass transport but also utilize the active sites of DN-OPC for ORR.Therefore,as metal-free ORR catalyst,DN-OPC exhibits a good activity close to commercial Pt/C catalyst,and an excellent durability and methanol tolerance.     

Gold nanoparticles deposited on mesoporous carbon as a solid-phase sorbent with enhanced extraction capacity and selectivity for anilines

Microchimica Acta - Gold nanoparticles (AuNPs) were in-situ deposited onto the ordered mesoporous carbon (OMC) to function as a novel SPME coating. The specific area, pore volumes and average pore...     

Ordered microporous membranes templated by breath figures for size-selective separation

Membranes with highly uniform pore size are important in various fields. Here we report the preparation and performance of ordered membranes, the pore diameter of which is on the micrometer scale. The ordered membranes fabricated at two-phase interfaces enable a high-resolution and energy-saving separation process. Moreover, a possible mechanism for the formation of through-pores has been proposed and experimentally verified.     

Preparation and evaluation of a well-ordered mesoporous nickel-molybdenum/silica opal hydrodesulfurization model catalyst

A silica-supported hydrodesulfurization (HDS) model catalyst with well-ordered pore structure was prepared by depositing Ni and Mo on the surface of silica opal. Using the voids of ordered packing of monodisperse silica microspheres, the pores of the model catalyst are wholly open-through and uniformly distributed. The ordered pore structure and regular smooth surface of the model catalyst make the surface states of metal oxides readily observable. As a result, the metal oxides were well dispersed on the silica, and the model catalyst exhibited a high activity in HDS of dibenzothiophene.     

COO-NiO/SBA-15的合成与表征

用组装的方法得到了高负载量、均匀分布的CoO-NiO负载型SBA-15介孔材料,并采用XRD,BET,HRTEM等测试手段对样品进行了分析.结果表明,CoO,NiO双组分氧化物已成功地组装进入了SBA-15的有序孔道,在CoO,NiO组装过程中,CoO,NiO含量(w)分别为0.0691和0.0837时,介孔材料的有序结构没有遭到破坏.     

Effect of synthesis conditions on the mesoscopical order of mesoporous silica SBA-15 functionalized by amino groups

Mesoporous amine-functionalized SBA-15 silica has been synthesized directly by the co-condensation of tetraethyl orthosilicate (TEOS) and aminopropyl-trimethoxysilane (APTMS) under acidic conditions with an APTMS/(APTMS + TEOS) molar ratio of 10%. The effect of synthesis conditions, including TEOS pre-hydrolysis, as well as the heating temperature and time, on the mesoscopical order and pore structure of the functionalized SBA-15 have been studied in detail by means of powder X-ray diffraction, nitrogen sorption, transmission electron microscopy, infrared spectra and solid state ²⁹Si nuclear magnetic resonance. A functionalized SBA-15 silica with a highly ordered two-dimensional P6 mm hexagonal symmetry and a narrow pore size distribution centered at 6 nm can be obtained if TEOS is allowed to pre-hydrolyze for 2 h. For the sample with TEOS pre-hydrolysis time of 4 h, aging at 50°C or 150°C leads to a more ordered pore arrangement compared to 100°C and also a narrower pore size distribution with larger pore volume. Increasing aging time is in favor of the formation of mesoscopically ordered structure, but fails to obtain a superior pore structure.     

A "teardown" method to create large mesotunnels on the pore walls of ordered mesoporous silica

A "teardown" method to create large mesotunnels (approximately 9 nm) on the pore walls of ordered mesoporous silicas is demonstrated by digesting the organic constituents from polymer-silicate nanocomposites. The ordered mesostructured polymer-silicate composites were first obtained via the evaporation-induced triconstituent co-assembly method by using a low-molecular-weight phenolic resin (resols) as an organic precursor; prehydrolyzed TEOS as an inorganic precursor, and triblock copolymer F127 as a template. All of organic components including F127 and phenolic resins are removed by the microwave digestion (MWD) method from mesostructured polymer-silica composites. While the removal of triblock copolymer F127 generates main pore channels, the phenolic resins can also be torn down from the pore walls, yielding mesotunnels between the channels. The resulting silica products exhibit ordered 2-D hexagonal mesostructure, large pore volume (up to 1.92 cm(3)/g), and very large pore size (up to 22.9 nm), which is even larger than their mesostructural cell parameter (14.2 nm). TEM images confirm the existence of mesotunnels on the silica pore walls. FT-IR and (29)Si solid-state NMR results reveal that these silica products have a large number of silanol groups.     

Studies on the steam CO2 reforming of methane over ordered mesoporous nickel–magnesium–alumina catalysts

Research on Chemical Intermediates - Ordered mesoporous materials have received much attention because of their high surface area and ordered pore structure. The Mg-promoted ordered mesoporous...     

DSC estimation of structural and textural parameters of SBA-15 silica using water probe

The aim of this study was to use DSC and X-ray diffraction measurements to determine the pore size and pore wall thickness of highly ordered SBA-15 materials. The DSC curves showed two endothermic events during the heating cycle. These events were due to the presence of water inside and outside of mesopores. The results of pore radius, wall thickness and pore volume measurements were in good agreement with the results obtained by nitrogen adsorption measurement, XRD and transmission electron microscopy.     

Determination and tailoring the pore entrance size in ordered silicas with cage-like mesoporous structures

A practical approach to the determination of the pore entrance size in ordered silicas with cage-like mesoporous structures (OSCMSs) is proposed. A fundamental insight into the OSCMS pore connectivity is gained, including the control of the pore entrance size by post-synthesis surface modification, and by selection of appropriate synthesis temperature. These findings show a new promise for the synthesis of mesoporous solids with molecular size- and shape-selective properties.     

Synthesis of ordered mesoporous NiO with crystalline walls and a bimodal pore size distribution

A mesoporous solid with crystalline walls and an ordered pore structure exhibiting a bimodal pore size distribution (3.3 and 11 nm diameter pores) has been synthesized. Previous attempts to synthesize solids with large ordered mesopores by hard templating focused on the preparation of templates with thick walls (the thick walls become the pores in the target materials), something that has proved difficult to achieve. Here the large pores (11 nm) do not depend on the synthesis of a template with thick walls but instead on controlling the microporous bridging between the two sets of mesopores in the KIT-6 template. Such control determines the relative proportion of the two pore sizes. The wall thickness of the 3D cubic NiO mesopore has also been varied. Preliminary magnetic characterization indicates the freezing of uncompensated moments or blocking of superparamagnetism.     

Cage-like ordered silica with large mesopore volume synthesized by doubling amount of polymer, adding sodium chloride and lowering acid concentration

Cage-like ordered mesoporous silica, FDU-1, with about twice the pore volume and a narrower pore size distribution compared with those for previously reported samples was synthesized in a much shorter time by doubling the amount of block copolymer, adding sodium chloride and lowering the acid concentration.     

Fabrication of ideally ordered anodic porous TiO2 by anodization of pretextured two-layered metals

Ideally ordered anodic porous TiO₂ was fabricated by anodizing an Al/Ti layered specimen. A two-layered specimen composed of an Al top layer and a Ti underlying layer was prepared and then processed by nanoimprinting. The Al top layer was easily pretextured by nanoimprinting owing to its softness and it was straightforward to introduce an ideally ordered pore arrangement by anodization. This pore arrangement was transferred to the underlying Ti layer, resulting in ideally ordered porous structures in TiO₂. This process can be applied to the high-throughput fabrication of ideally ordered anodic porous oxides other than TiO₂ and also to other metals with high hardness.     

Cylinder-forming triblock terpolymer in nanopores: a Monte Carlo simulation study

This paper systematically investigated the self-assembly of a cylinder-forming A13B3C2 triblock terpolymer confined in cylindrical nanopores using an annealing Monte Carlo simulation. When the pore wall is absolutely neutral, we observed the helix structures alternating with partial cylinder structures at the outside layer. When the pore wall attracts the shorter blocks, we observed various surface structures depending on the pore wall preference conditions; also, a general inner-layer structural transition sequence was confirmed. In addition, it was found that catenoid structures form in a broad pore diameter region when the pore wall attracts the longest block. This may be used to experimentally fabricate the long-range ordered nanostructure. The differences between this triblock terpolymer system and the cylinder-forming diblock copolymer system were compared, and it was found that the triblock system is more capable of retaining ordered structures under unfavorable confinement conditions.