Alkylammonium-based protic ionic liquids. II. Ionic transport and heat-transfer properties: fragility and ionicity rule

The physicochemical characterization of six alkylammonium-based protic ionic liquids (PILs) is presented. These compounds were prepared through a simple and atom-economic neutralization reaction between a tertiary amine and a Br?nsted acid, HX, where X- is HCOO-, CH3COO-, HF2-. The temperature dependency and the effect of added water on properties such as density, viscosity, ionic conductivity, and the thermal comportment of these PILs were measured and investigated. The results allowed us to classify them according to a classical Walden diagram and to appreciate their great "fragility". PILs have applicable perspectives in replacements of conventional inorganic acids for fuel cell devices and thermal transfer fluids.     

Hydrogen bonds in protic ionic liquids and their correlation with physicochemical properties

The temperature dependence of the N-H proton chemical shift in protic ionic liquids (PILs) and FT-IR spectra of the N-H bonds indicated the presence of strong hydrogen bonds between the protonated cation and the anion, depending on the ΔpK(a) of the constituent acid and base, and their successive breaking with temperature, which may explain the characteristic properties of PILs such as relatively low ionicity and its decrease with temperature.     

Synthesis and characterization of new pyrrolidinium based protic ionic liquids. Good and superionic liquids

New pyrrolidinium-cation-based protic acid ionic liquids (PILs) were prepared through a simple and atom-economic neutralization reactions between pyrrolidine and Br?nsted acids, HX, where X is NO 3 (-), HSO 4 (-), HCOO (-), CH 3COO (-) or CF 3COO (-) and CH 3(CH 2) 6COO (-). The thermal properties, densities, electrochemical windows, temperature dependency of dynamic viscosity and ionic conductivity were measured for these PILs. All protonated pyrrolidinium salts studied here were liquid at room temperature and possess a high ionic conductivity (up to 56 mS cm (-1)) at room temperature. Pyrrolidinium based PILs have a relatively low cost, a low toxicity and exhibit a large electrochemical window as compared to other protic ionic liquids (up 3 V). Obtained results allow us to classify them according to a classical Walden diagram and to determinate their "Fragility". Pyrrolidinium based PILs are good or superionic liquids and shows extremely fragility. They have wide applicable perspectives for fuel cell devices, thermal transfer fluids, and acid-catalyzed reaction media as replacements of conventional inorganic acids.     

Diels-Alder reaction in protic ionic liquids

Protic imidazolium ionic liquids have been tested as reaction media in the Diels-Alder reaction between cyclopentadiene and two dienophiles (dimethyl maleate and methyl acrylate). Good conversions and endo/exo selectivities were achieved. The activation of the dienophile by hydrogen bonding with protic imidazolium ILs was demonstrated.     

Amphiphilicity determines nanostructure in protic ionic liquids

The bulk structure of the two oldest ionic liquids (ILs), ethylammonium nitrate (EAN) and ethanolammonium nitrate (EtAN), is elucidated using neutron diffraction. The spectra were modelled using empirical potential structure refinement (EPSR). The results demonstrate that EAN exhibits a long-range structure of solvophobic origin, similar to a bicontinuous microemulsion or disordered L(3)-sponge phase, but with a domain size of only 1 nm. The alcohol (-OH) moiety in EtAN interferes with solvophobic association between cation alkyl chains resulting in small clusters of ions, rather than an extended network.     

Electrochemistry of room temperature protic ionic liquids

Eighteen protic ionic liquids containing different combinations of cations and anions, hydrophobicity, viscosity, and conductivity have been synthesized and their physicochemical properties determined. In one series, the diethanolammonium cations were combined with acetate, formate, hydrogen sulfate, chloride, sulfamate, and mesylate anions. In the second series, acetate and formate anions were combined with amine bases, triethylamine, diethylamine, triethanolamine, di-n-propylamine, and di-n-butylamine. The electrochemical characteristics of the eight protic ionic liquids that are liquid at room temperature (RTPILs) have been determined using cyclic, microelectrode, and rotating disk electrode voltammetries. Potential windows of the RTPILs have been compared at glassy carbon, platinum, gold, and boron-doped diamond electrodes and generally found to be the largest in the case of glassy carbon. The voltammetry of IUPAC recommended potential scale reference systems, ferrocene/ferrocenium and cobaltocenium/cobaltocene, have been evaluated and found to be ideal in the case of the less viscous RTPILs but involve adsorption in the highly viscous ones. Other properties such as diffusion coefficients, ionic conductivity, and double layer capacitance also have been measured. The influence of water on the potential windows, viscosity, and diffusion has been studied systematically by deliberate addition of water to the dried ionic liquids. The survey highlights the problems with voltammetric studies in highly viscous room temperature protic ionic liquids and also suggests the way forward with respect to their possible industrial use.     

Synthesis and characterization of protic ionic liquids containing cyclic amine cations and tetrafluoroborate anion

Several ionic liquids containing pyrrolidinium-, oxopyrrolidinium-, piperidinium-, morpholinium- and trialkylammonium-based cation are synthesized and their thermal property, refractive index, polarity, electrochemical property, and temperature dependency of dynamic viscosity, density and ionic conductivity are characterized. All tetrafluoroborate-based room temperature ionic liquids studied here have a high ionic conductivity (up to 31.4 mS cm^?1). These ILs were successfully used as suitable electrolytes for the diffusion coefficient measurement of ferrocene. Absorbance solvatochromic probes Nile red is used to investigate the relative polarity of these ionic liquids and compared them with several organic solvents. The relation of fluidity to conductance is considered in terms of a Walden plot that is shown to provide a useful basis for organizing the applications of solvent media for ??green?? synthetic reactions.     

Superbase-derived protic ionic liquids with chelating fluorinated anions

Eighteen new protic ionic liquids were synthesized in one step from five organic superbases and five commercially available fluorinated β-diketones. Physical properties of the ionic liquids, including thermal decomposition temperature were determined. Nine of the ionic liquids were examined as extraction media for La³⁺, with some very large distribution coefficients obtained.     

Part I: Ni-Co alloy foils electrodeposited using ionic liquids

The Ni-Co alloy co-electrodeposit from a sulfate bath including two new ionic liquids 1-methyl-3-(2-oxo-2-((2,4,5 trifluorophenyl) amino) ethyl)-1H-imidazol-3-ium iodide [MOFIM]I and 1-(4-fluorobenzyl)-3-(4-phenoxybutyl) imidazol-3-ium bromide [FPIM]Br as additives was characterized using the SEM, EDS, EDS mapping, XRD, AFM and microhardness measurement techniques. The resultant surface morphologies in acidic sulfate baths on a copper substrate demonstrated that both the [MOFIM]I and [FPIM]Br additives served as effective leveling agents. The Ni-Co alloy co-deposit morphology in the [MOFIM]I bath was more enhanced (non-grained coating, R_a of 28 nm and R_t of 35.5 nm) than that in the [FPIM]Br bath (grain size 225 nm, R_a of 51. 1 nm and R_t of 65.7 nm) owing to the molecular structure. The co-deposition of Co and Ni from the acidic baths was of the anomalous type. Moreover, the anomalous behavior of the Ni-Co co-deposition was alleviated after [MOFIM]I and [FPIM]Br were introduced in the bath. To determine the optimal bath conditions, the cathodic current efficiency (CCE%) value was calculated during the Ni-Co alloy co-electrodeposition process under three different compositions and different operating conditions. Under the composition of Ni 70% and Co 30% (Ni70%-Co30% alloy deposit), the CCE% values increased considerably, with maximum values of 99.8% and 97.07% in the baths including [MOFIM]I and [FPIM]Br, respectively.     

Preparation and characterization of amino or carboxyl-functionalized ionic liquids

New functionalized ionic liquids,1-carboxylmethyl-3-methylimimidazolium hexafluorophosphate or fluoborate and 1-ami- noethyl-3-methylimimidazolium hexafluorophosphate or fluoborate have been synthesized and investigated.The obtained amino or carboxyl-functionalized ionic liquids were all characterized by FT-IR,~1H NMR and MS(ESI)and their properties such as freezing point,viscosity,solubility,specific gravity,surface tension,and interracial tension were also determined.     

Preparation and characterization of new room temperature ionic liquids

A new series [C(n)O(m )mim][X] of imidazolium cation-based room temperature ionic liquids (RTILs), with ether and alcohol functional groups on the alkyl side-chain has been prepared. Some physical properties of these RTILs were measured, namely solubility in common solvents, viscosity and density. The solubility of LiCl, HgCl(2) and LaCl(3) in room temperature ionic liquids was also determined. The features of the solid-liquid phase transition were analysed, namely the glass transition temperature and the heat capacity jump associated with the transition from the non-equilibrium glass to the metastable supercooled liquid. These properties were compared with those reported for the 1-n-alkyl-3-methylimidazolium [C(n )mim][X] series. While the density and solid-liquid phase transition properties are similar for both series, the new RTILs present a considerably lower viscosity and an increased ability to dissolve HgCl(2) and LaCl(3) (up to 16 times higher).     

Pseudo-capacitance of nanoporous carbons in pyrrolidinium-based protic ionic liquids

Protic ionic liquids (PILs) were used as novel electrolyte for carbon-based supercapacitors. The cyclic voltammograms in three-electrode cells show reversible redox humps, revealing pseudo-faradaïc charge transfer. Oxidative treatment of activated carbon enriches the surface functionality and leads to a higher capacitance owing to a stronger pseudo-faradaïc contribution. The capacitors using PILs demonstrate a higher voltage window than with aqueous H₂SO₄, while keeping the same values of capacitance, and being able to operate at lower temperature. A combination of activated carbons and PILs holds promise for improving the energy characteristics of supercapacitors.     

Formation of amphiphile self-assembly phases in protic ionic liquids

A range of protic ionic liquids (PILs) have been identified as being capable of supporting the self-assembly of the nonionic surfactants myverol 18-99 K (predominantly monoolein) and phytantriol. PIL-surfactant penetration scans have provided a high throughput technique to determine which lyotropic liquid crystalline phases were formed in the 40 PIL-surfactant systems investigated. Lamellar, inverse hexagonal, and bicontinuous cubic phases that are stable in excess PIL have been observed in surfactant-PIL systems. The studied PILs possess a wide range of solvent properties, including surface tension and viscosity. The nature of the formed amphiphile self-assembly phases is discussed in terms of the PIL structure and solvent properties.     

Enhanced membrane transport of pharmaceutically active protic ionic liquids

We show that pharmaceutically active protic ionic liquids can be designed to rapidly transport through model membranes as neutral hydrogen bonded clusters.     

Amphiphilic protic anionic oligomeric ionic liquids of hyperbranched structure

The method of synthesizing anionic amphiphilic protic hyperbranched ionic liquids with the controlled ratio between hydrophilic ionic-liquid groups and hydrophobic alkyl urethane fragments in the oligoester nucleus shell is developed. These compounds are synthesized by the interaction of excess hyperbranched polyesterpolyol containing 32 terminal hydroxyl groups with n-octadecyl isocynate followed by the acylation of hydroxyl groups by phthalic anhydride or 2-sulfobenzoic anhydride and the neutralization of the formed carboxyl or sulfonic groups by N-methylimidazole or 1,2,4-1H-triazole. With a rise in the content of alkyl urethane fragments, the synthesized compounds form the crystalline phase. Structuring of the system leads to different effects of the degree of ionicity of ionic-liquid groups on proton conductivity, which is within 10^–7–10^–4 S/cm at 100–120°C under anhydrous conditions. The thermal stability of the hyperbranched ionic liquids is determined by the nature of ionic-liquid groups and the amount of the introduced alkyl urethane fragments; it is in the range of 170–270°C.     

Alkyltrioctylphosphonium chloride ionic liquids: synthesis and physicochemical properties

A series of alkyltrioctylphosphonium chloride ionic liquids, prepared from trioctylphosphine, and the respective 1-chloroalkane (C(n)H(2n+1)Cl), where n = 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12 or 14, is presented. The cynosure of this work is the manner in which the variable chain length impacts the physical properties, such as melting points/glass transitions, thermal stability, density and viscosity. Experimental density and viscosity data were interpreted using QPSR correlations and group contribution methods. We present the first example of an empirical alternation effect for ionic liquids.     

Many protic ionic liquids mediate hydrocarbon-solvent interactions and promote amphiphile self-assembly

A large number of protic ionic liquids (PILs) have been found to mediate solvent-hydrocarbon interactions and promote amphiphile self-assembly. Hexagonal, cubic, and lamellar lyotropic liquid crystalline phases were observed in PIL-hexadecyltrimethylammonium bromide systems. The driving force for the formation of the self-assembled aggregate structures has been attributed to an entropic contribution to the free energy of association, analogous to the hydrophobic effect in water. The specific aggregate structures formed depend upon the cationic and anionic components of the PIL and their interactions with the amphiphiles.     

Density, viscosity and electrical conductivity of protic alkanolammonium ionic liquids

Ionic liquids are molten salts with melting temperatures below the boiling point of water, and their qualification for applications in potential industrial processes does depend on their fundamental physical properties such as density, viscosity and electrical conductivity. This study aims to investigate the structure-property relationship of 15 ILs that are primarily composed of alkanolammonium cations and organic acid anions. The influence of both the nature and number of alkanol substituents on the cation and the nature of the anion on the densities, viscosities and electrical conductivities at ambient and elevated temperatures are discussed. Walden rule plots are used to estimate the ionic nature of these ionic liquids, and comparison with other studies reveals that most of the investigated ionic liquids show Walden rule values similar to many non-protic ionic liquids containing imidazolium, pyrrolidinium, tetraalkylammonium, or tetraalkylphosphonium cations. Comparison of literature data reveals major disagreements in the reported properties for the investigated ionic liquids. A detailed analysis of the reported experimental procedures suggests that inappropriate drying methods can account for some of the discrepancies. Furthermore, an example for the improved presentation of experimental data in scientific literature is presented.