PU大分子单体水溶液性质

双亲聚合物一般由亲水和亲油 2种链段构成 ,有嵌段型[1,2 ] 和接枝型[3 ] 2种 ,其中通过大分子单体法合成双亲接枝聚合物备受关注[4] 。如以亲水性大分子单体和亲油性小分子单体共聚 ,大分子单体构成共聚物主链上支链 ,具有较大活动性 ,亲水效能高。采用对氯甲基苯乙烯[5] 或甲基丙烯酰氯[6] 与聚氧化乙烯大分子的一端相反应 ,可得到亲水性大分子单体 ,但其分子量及结构变化有限。本文采用常规条件 ,合成了嵌段式水溶性聚氨酯大分子单体 ,其分子量较大 ,共聚接枝的支链较长。利用该大分子单体具有非离子高分子表面活性剂的性质 ,采用无皂乳…     

高分子囊泡和空心球的制备和几个研究亮点

聚合物囊泡和空心球是具有重要理论研究价值和在很多领域特别是在生物医药方面具有潜在应用的大分子组装体本文综述了高分子囊泡及空心球的制备方法及某些新发展其传统的制备方法主要包括嵌段共聚物自组装法和聚合物胶束去核法以及模板上合成着重讨论了近年来新发展起来的非共价键合自组装法(NCCM)以及通过化学反应一步从单体获得聚合物空心...     

氨基氮杂环荧光分子改性苯乙烯马来酸酐共聚物的研究

荧光高分子材料 ,由于其独特光学性质 ,成为功能高分子研究热点[1～ 3 ] .一般而言 ,荧光聚合物的合成有两种方法 ,一是首先合成荧光单体 ,然后与其他适宜单体聚合 ,得到荧光聚合物 ,然而荧光单体结构复杂 ,提纯困难 ,难以获得高分子量、成膜性能好的聚合物[4] ;另一种方法是通过官能团的反应 ,用荧光物质对聚合物进行化学改性来制备[5,6] .苯乙烯 马来酸酐共聚物 (ＳＭＡ)是一类成本低廉 ,性能良好的商品化聚合物材料 ,主链中含有具有反应性能的酸酐基团 ,这就使通过化学改性制备荧光聚合物成为可能 .本文通过 2 氨基苯并咪唑 ( 1 ) ,4 …     

特殊形态接枝高分子颗粒的合成

表面接枝高分子微球具有分子结构的可设计性 ,分散稳定性好 ,被用于高效催化剂的载体、药物释放控制和疾病治疗等生物医学领域 ,因而引起了许多高分子材料和生物医学工作者的极大兴趣[1～ 3] .我们用链转移自由基聚合法合成了一端为苯乙烯基封端的聚乙二醇 ( PEG)和聚 ( N -异丙基丙烯酰胺 )等亲水性大分子单体 .在与疏水性单体如苯乙烯等的二元分散共聚反应中 ,利用接枝共聚物在溶液中的自组装 ,制备了粒径分布均一 ,颗粒表面形态光滑 ,同时表面具有功能性高分子链的微球 [4～ 8] .传统的合成高分子微球的研究主要是以苯乙烯或甲基丙烯酸…     

RAFT法合成两亲性嵌段共聚物PSt-b-PAA-b-PSt及其在离子液体[BMIM][PF_6]中的自组装

用三硫代碳酸二(α,α′-二甲基-α-乙酸)酯(BDATC)作为链转移剂,苯乙烯St作为第一单体,通过可逆加成-断裂链转移聚合(RAFT)方法合成出大分子链转移剂PSt-CTA,以丙烯酸AA作为第二共聚单体合成出3个不同嵌段比的两亲性嵌段共聚物聚苯乙烯-b-聚丙烯酸-b-聚苯乙烯(PSt-b-PAA-b-PSt).通过傅里叶变换红外光谱(FTIR)和核磁共振氢谱(1H-NMR)确定了PSt-b-PAA-b-PSt结构,使用凝胶渗透色谱(GPC)测定了大分子引发剂PSt-CTA和嵌段共聚物PSt-b-PAA-b-PSt的分子量及分子量分布.将这3个不同嵌段比的两亲性嵌段共聚物在离子液体1-丁基-3-甲基咪唑六氟磷酸盐[BMIM][PF6]中进行自组装,用透射电子显微镜(TEM)观察聚合物在离子液体中自组装结构.研究发现,当PSt的链段长度固定时,胶束的自组装形态主要依赖于PAA链的长度.当PAA链段较长时,胶束呈球形;PAA链段变得较短时,胶束的形态则由球形转变为核壳结构,并且胶束形态在25℃至100℃之间不受温度影响.     

液晶聚酯与环氧嵌段共聚物的合成及表征

近年来 ,人们利用高分子液晶作为热固性环氧树脂的改性剂 ,不仅可以提高环氧树脂的韧性和强度 ,而且可以改善其热性能 ,为制备高性能的环氧树脂提供了一条新的途径[1,2 ] .目前报道所使用的液晶聚合物大多为液晶聚酯[3 ] 或液晶性聚氨酯[4] ,这些液晶聚合物与环氧树脂由于存在相容性不好的问题 ,给其实际应用带来了困难 .为了改善二者的相容性 ,本文采用溶液法合成了末端带有反应活性基团的聚酯型液晶聚合物 ,将它再与双酚Ａ环氧预聚物反应 ,制得了高分子液晶环氧嵌段共聚物 ,其合成路线如下 :2ＨＯＣＯＯＣＨ3+ ＨＯ(ＣＨ2 ) 6 ＯＨ　　Ｈ…     

在四官能团引发剂存在下的自缩合乙烯基聚合反应制备丙烯酸酯类超支化共聚物

超支化聚合物具有特殊的结构和性能 ,可通过一步法聚合直接制得 ,具有大规模工业应用前景 .近年来 ,超支化聚合物的研究已成为高分子科学的热门课题之一[1～ 3 ] .超支化聚合物的一个主要缺点是它的分子量分布比较宽 .Ｍ櫣ｌｌｅｒ[4] 等通过理论计算指出 ,在聚合体系中加入ｆ个功能基团的分子Ｂｆ[对自缩合乙烯基聚合反应 (ＳＣＶＰ) ,Ｂｆ为ｆ个引发基的引发剂 ;对ＡＢｘ 型单体的缩聚反应 ,为有ｆ个Ｂ官能团的分子 ],可以降低超支化聚合物的分子量分布 ,这一结果已被实验证实[5～ 7] .我们用ＭｏｎｔｅＣａｒｌｏ方法模拟了在多官能团引…     

端丙烯酸酯基超支化聚(酯-胺)的结构分析及光固化

近年来 ,具有树枝状结构的超支化聚合物因其独特的物理化学性质而得到广泛关注[1,2 ] .超支化聚合物主要采用 3种途径合成 ,( 1 )ABn(n >2 )型及潜ABn 型单体的聚合 ;( 2 )由A2 与Bn 型单体直接聚合 ;( 3)先由特定的单体对原位形成ABn型中间体后再聚合 .其中后两种方法可直接采用商业化原料 ,因此更具有实用价值 .目前 ,基于途径 ( 2 )已合成出超支化聚酰胺[3 ] 、聚醚[4] 、聚酰亚胺[5] 和共轭聚合物[6] 等 ,但该途径容易生成凝胶化产物 ,通过控制反应物浓度、在凝胶点之前停止反应等 ,可得到溶解型超支化产物 .由于超支化聚合物具有低…     

聚氯乙烯-g-聚甲基丙烯酸-2-羟乙酯共聚物的合成和表征

聚氯乙烯 (ＰＶＣ)是常用医用高分子材料之一 ,可以制作储血袋、导液管、人工尿道等 .ＰＶＣ亲水性差 ,影响其生物相容性 .采用亲水性单体与ＰＶＣ接枝共聚是提高ＰＶＣ亲水性的重要方法[1] .Ｋｒｉｓｈｎａｎ等[2 ] 对Ｃｏ60 辐照下ＰＶＣ接枝Ｎ 乙烯基吡咯烷酮进行了研究 .Ｓｉｎｇｈ等[3～ 5] 采用辐照引发甲基丙烯酸在ＰＶＣ薄膜的接枝反应 ,对接枝动力学、接枝后薄膜表面形态、溶胀和抗凝血性等进行了研究 .Ｇｏｌｄｂｅｒｇ等[6] 采用辐照引发甲基丙烯酸2 羟乙酯 (ＨＥＭＡ)在ＰＶＣ薄膜上的接枝 .Ｌｅｅ等[7]采用溶液接枝共聚制备了…     

星形胶束自由能和聚集数的理论分析

ＡＢ型嵌段聚合物在选择性溶剂中将发生微相分离,形成一种球形胶束[1].所谓选择性溶剂是指此溶剂仅能溶解共聚物中某一链段,而对另一链段则为不良溶剂.对这一体系的实验研究是从80年代兴起的,主要采用现代测试技术来表征形成胶束的回转半径[2],动力学半径[3]、聚集数[4]和临界胶束浓度[5].从分子图景上看来,这种球形胶束包括两部分,内核(Ｃｏｒｅ)为密堆砌的链段Ａ;壳层(Ｃｏｒｏｎａ)为溶涨的链段.Ｈｅｌｆａｎｄ等[6]最早利用数值计算法来研究嵌段聚合物在本体中的微相分离的问题;Ｌｅｉｂｌｅｒ等[7]将此方法引入嵌段聚合物/均聚物体系.…     

活性自由基聚合反应合成苯乙烯与丙烯酸酯嵌段共聚物及相关共聚物

用Cu(phen) 2 Br/1 PEBr催化引发体系合成了分子量为 50 0 0左右的溴端基聚苯乙烯 (PS Br) .以后者为大分子引发剂 ,在Cu( phen) 2 Br存在下引发甲基丙烯酸甲酯 (MMA)或丙烯酸丁酯 (BA)聚合 ,合成了二嵌段共聚物PS b PMMA和PS b PBA ,并通过GPC、IR、1H NMR及DSC等进行了表征 .实验发现 ,丙烯酸甲酯(MA)在Phen/CuCl/CCl4 催化引发下发生爆聚反应 ,仅当和异丁基乙烯基醚 (IBVE)才发生可控的自由基共聚合反应 .当MA和IBVE的投料摩尔比为 1∶1时 ,所得共聚物中两种单体链节的组成比为 1∶1 7左右 .     

Synthesis of poly(4-vinylpyridine) and block copoly (4-vinylpyridine-b-styrene) by atom transfer radical polymerization using 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazamacrocyclotetradecane as ligand

Poly(4-vinylpyridine) (P4VP) and block copolymer, poly(4-vinylpyridine-b-styrene) (P4VP-b-PSt) were prepared by atom transfer radical polymerization (ATRP) using 1-phenylethyl chloride as initiator, CuCl and 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazamacrocyclotetradecane (Me₆[14]aneN₄) as catalyst and ligand. The polymerization of 4VP was carried out in 2-propanol at 40 °C. GPC and NMR studies show that the plot of ln([4VP]₀/[4VP]) against the reaction time is linear, and the molecular weight of the resulting P4VP increased linearly with the conversion. Within 3 h, the conversion can reach almost 90%. P4VP-b-PSt amphiphilic block copolymer with low polydispersity index (M_w/M_n ≈ 1.2) is also obtained by ATRP of St in DMF at 110 °C using P4VP-Cl as macroinitiator, CuCl/ Me₆[14]aneN₄ as catalyst.     

用双官能团引发剂进行的原子转移自由基嵌段和无规共聚

原子转移自由基聚合［１］,可同时适用于非极性单体和极性单体,如苯乙烯、二烯烃类和（甲基）丙烯酸酯、丙烯腈类单体［１～３］,这是传统的活性聚合如阴离子聚合和基团转移聚合所不及的;可以用于制备包括无规、嵌段、星形与高支化物在内的诸多结构清晰的高分子化合物...     

Synthesis of poly(methyl methacrylate)‐b‐polystyrene containing a crown ether unit at the junction point via combination of atom transfer radical polymerization and nitroxide mediated radical polymerization routes

Poly(methyl methacrylate)‐b‐polystyrene (PMMA‐b‐PS) containing a benzo‐15‐crown‐5 unit at the junction point was prepared by combining atom transfer radical polymerization and nitroxide‐mediated radical polymerization. For this purpose, 6,7,9,10,12,13,15,16‐octahydro‐5,8,11,14,17‐pentaoxa‐benzocyclopentadecene‐2‐carboxylic acid 3‐(2‐bromo‐2‐methyl‐propionyloxy)‐2‐methyl‐2‐[2‐phenyl‐2‐(2,2,6,6‐tetramethyl‐piperidin‐1‐yloxy)‐ethoxycarbonyl]‐propyl ester ( 3 ) was synthesized and used as an initiator in atom transfer radical polymerization of methyl methacrylate in the presence of CuCl and pentamethyldiethylenetriamine at 60°C. A linear behavior was observed in both plots of ln([M]₀/[M]) versus time and M_n,_GPC versus conversion indicating that the polymerization proceeded in a controlled/living manner. Thus obtained PMMA precursor was used as a macroinitiator in nitroxide‐mediated radical polymerization of styrene (St) at 125°C to give well‐defined PMMA‐b‐PS with crown ether per chain. Kinetic data were also obtained for copolymerization. Moreover, potassium picrate (K⁺ picrate) complexation of 3 and PMMA‐b‐PS copolymer was studied. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3242–3249, 2006     

Synthesis of poly(vinyl acetate) block copolymers by successive RAFT and ATRP with a bromoxanthate iniferter

Poly(vinyl acetate)-b-polystyrene, poly(vinyl acetate)-b-poly(methyl acrylate) and poly(vinyl acetate)-b-poly(methyl methacrylate) block copolymers with low polydispersity (M(w)/M(n) < 1.25) were prepared by successive reversible addition-fragmentation chain transfer (RAFT) polymerization and atom transfer radical polymerization (ATRP) employing a bromoxanthate iniferter (initiator-transfer agent-terminator).     

乙烯基单体与含氮氧稳定自由基单体的原子转移自由基共聚合研究

通过苯乙烯或甲基丙烯酸甲酯与含氮氧稳定自由基的单体进行原子转移自由基共聚合 ,研究了共聚合反应的条件及动力学 ,成功地合成出侧链含TEMPO基团的氮氧稳定自由基聚合大分子引发剂 .大分子引发剂的结构通过核磁共振谱图进行确证 ,并对共聚合反应的历程进行了探讨     

Reversible addition–fragmentation transfer polymerization of p‐nitrophenyl acrylate and synthesis of diblock copolymers poly(p‐nitrophenyl acrylate)‐b‐polystyrene

Poly(p‐nitrophenyl acrylate)s (PNPAs) with different molecular mass and narrow polydispersity were successfully synthesized for the first time by reversible addition–fragmentation transfer (RAFT) polymerization with azobisisobutyronitrile (AIBN) as an initiator and [1‐(ethoxy carbonyl) prop‐1‐yl dithiobenzoate] as the chain‐transfer agent. Although the molecular mass of PNPAs can be controlled by the molar ratio of NPA to RAFT agent and the conversion, a trace of homo‐PNPA was found, especially at the early stage of polymerization. The dithiobenzoyl‐terminated PNPA obtained was used as a macro chain‐transfer agent in the successive RAFT block copolymerization of styrene (St) with AIBN as the initiator. After purification by two washings with cyclohexane and nitromethane to remove homo‐PSt and homo‐PNPA, the pure diblock copolymers, PNPA‐b‐PSt's, with narrow molecular weight distribution were obtained. The structural analysis of polymerization products by ¹H NMR and GPC verified the formation of diblock copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4862–4872, 2004     

Emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate and methyl methacrylate

The emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate (EHMA) and methyl methacrylate (MMA) was carried out with the bifunctional initiator 1,4‐butylene glycol di(2‐bromoisobutyrate). The system was mediated by copper bromide/4,4′‐dinonyl‐2,2′‐bipyridyl and stabilized by polyoxyethylene sorbitan monooleate. The effects of the initiator concentration and temperature profile on the polymerization kinetics and latex stability were systematically examined. Both EHMA homopolymerization and successive copolymerization with MMA proceeded in a living manner and gave good control over the polymer molecular weights. The polymer molecular weights increased linearly with the monomer conversion with polydispersities lower than 1.2. A low‐temperature prepolymerization step was found to be helpful in stabilizing the latex systems, whereas further polymerization at an elevated temperature ensured high conversion rates. The EHMA polymers were effective as macroinitiators for initiating the block polymerization of MMA. Triblock poly(methyl methacrylate–2‐ethylhexyl methacrylate–methyl methacrylate) samples with various block lengths were synthesized. The MMA and EHMA reactivity ratios determined by a nonlinear least‐square method were ～0.903 and ～0.930, respectively, at 70 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1914–1925, 2006     

衰减链转移(DT)聚合醋酸乙烯酯的动力学

在醋酸乙烯酯的普通自由基聚合体系中加入少量碘（质量分数为0.57%～0.86%）,用偶氮二异丁腈作引发剂合成聚醋酸乙烯酯,对其聚合反应的动力学及反应机理进行了研究。 考察了碘质量分数对聚合反应速率、聚合物分子量及分子量分布的影响,发现随着碘浓度的增加,聚合物分子量及分子量分布得到更好的控制;对聚合过程进行了核磁跟踪,考察了聚合过程中几种化合物的变化情况,特别是初级自由基与碘生成的加合物A-I（A来自引发剂分裂后产生的自由基）及单体加合物A-Mn-I（M代表单体单元）的变化情况;对聚合物结构作了详细的1H NMR分析,结果表明,聚合过程中分子量随时间延长而逐渐增大,分子量分布随单体转化率增加而变窄,聚合终期,单体转化率达到80%左右时,所得聚合物分子量分布窄（Mw/Mn≤1.41）,且含有碘端基。该方法的自由基聚合具有活性/可控的性质。     

Formation of hyperbranched polymers in atom transfer radical copolymerization of MMA and DVB

Hyperbranched poly(methyl methacrylate)s (HPMMAs) have been successfully prepared by atom transfer radical copolymerization of MMA and divinylbenzene (DVB). Kinetic study shows complete consumption of the initiator in 0.5 h, and relatively low polymerization rate when DVB content in the feed was high. By analyzing MALDI-TOF spectra of the resulting copolymers, the linear A _n B* (n = 0, 1, 2, 3) oligomers were formed in 0.5 h of polymerization, and then the oligomers reacted each other to form dimers, further reactions produced HPMMA. The SEC and NMR spectroscopies were used to trace the polymerization, and the results demonstrate that small amount of the branching reactions occur in the initial polymerization, and the branched polymers are significantly generated past a certain conversion depending upon the feed ratios. Raising the content of DVB in the monomer mixture can increase the pendent vinyl groups of the linear oligo-inimers, leading to gelation at low MMA conversion.