饮用水新型含氮消毒副产物卤乙酰胺稳定性研究

饮用水氯化消毒工艺向氯胺消毒工艺的转变, 降低了三卤甲烷(THM)和卤乙酸(HAA)等消毒副产物(DBP)的浓度, 但增加了毒性更强的含氮消毒副产物(N-DBP)含量, 卤乙酰胺(HAcAm)便是其中的代表. 本研究结合线性自由能关系(LFER)理论, 考察了HAcAm在不同pH条件下的水解特性, 以及不同氯投加量条件下的氯化特性, 并探讨了HAcAm的水解和氯化反应路径. 结果表明, 在较强的酸性条件下(pH＝4)二氯乙酰胺(DCAcAm)将发生水解反应, pH＝5时DCAcAm较为稳定, 三氯乙酰胺(TCAcAm)在酸性条件下未产生明显的水解现象; 碱性环境中TCAcAm和DCAcAm皆发生明显水解反应, 反应符合一级动力学, 保存DCAcAm和TCAcAm水样时需调pH至5左右. 氯化消毒会产生较高浓度的THM和HAA, 但可能会缩减毒性更强的HAcAm等N-DBP在饮用水中的含量. pH＝10时TCAcAm水解后快速生成三氯乙酸(TCAA); 而对于氯化反应, TCAcAm与HOCl反应生成较为稳定的中间产物Cl-N-TCAcAm, 当HOCl浓度较高时, Cl-N-TCAcAm进一步与HOCl反应生成TCAA.     

臭氧化对水厂水中消毒副产物生成势的影响

以某饮用水厂沿程工艺出水为研究对象,研究了臭氧化预处理对水体中消毒副产物(DBPs)氯化生成势的影响。结果表明,水厂生物处理单元产生的胞外聚合物(EPS)和溶解性微生物产物(SMP)等生物源有机物是非常有效的DBPs前体物,但其更易于氯化生成三卤甲烷(THMs)而非卤乙酸(HAAs)。水厂水中存在的THMs前体物主要是各类大分子量有机物,并且臭氧工艺对其有较好的氧化去除效果。水厂水中经臭氧氧化产生的小分子量有机物可能是更为有效的一氯乙酸(MCAA)和一溴乙酸(MBAA)前体物。此外,当水体中三氯乙酸(TCAA)前体物浓度较高时,臭氧工艺对TCAA生成势具有很好的去除效果。     

白色念珠菌N-肉豆蔻酰基转移酶中药物结合位点的MCSS分析

采用多拷贝同时搜寻方法(MCSS)分析得到了CaNMT活性位点的疏水区域、氢键结合位点和负电性区域. MCSS计算结果显示, CaNMT活性位点有两个疏水性比较强的区域: 一个由Tyr107, Tyr109, Val108, Phe117, Phe123, Ala127, Phe176和Leu337等残基组成; 另一个由Phe115, Phe240和Phe339组成. CaNMT活性位点发现有两个氢键作用区域, 其中Tyr119, His227, Asn392和Leu451是与已有抑制剂的氢键结合位点, Tyr107, Asn175, Thr211和Asp412是新发现的氢键结合位点, 而且在NMT家族中高度稳定, 它们对设计新结构类型的CaNMT抑制剂具有重要作用. Leu451是负电性兼氢键作用位点, 是抑制剂设计时所必需考虑的位点.     

促δ-波睡眠肽的结构与功能的研究

用固相法合成了促δ-波睡眠肽Trp-Ala-Gly-Gly-Asp-Ala-Ser-Glu(DSIP)及其十四种类似物和三个短肽,研究了结构与功能的关系,类似物的设计,主要考虑在分子中引入D-氨基酸以抑制酶的作用和增强稳定性,以及引入疏水侧链氨基酸如Phe和Trp等。位置的修饰主要在1,3,4,5,8和9位,即:D-Trp[1],Tyr[1],Tyr[1]Phe[5],D-Trp[1]Phe[8],Trp[3,4],D-Trp[3,4],D-Trp[1,3,4]Phe[8],D-Glu[9],D-pF-Phe[3,4]Phe[8]D-Glu[9],Phe[5],Glu[5]Asp[9],Tyr[5]Asp[9],Ala[7]和Asp[9]-DSIP以及Trp-Ala-Gly-Gly-Asp,Trp-Ala-Gly-Gly-Glu和Trp-Gly-Glu.合成肽的纯度经氨基酸组成分析、元素分析、薄层层析以及纸电泳鉴定。生物试验表明D-Trp[1],Tyr[1],Tyr[1]Phe[5],Ala[7]-DSIP无促眠活性;而Phe[5]-DSIP的促眠活性与DSIP相接近,其他类似物的生物试验结果将另文发表。     

分子动力学模拟残基突变对芳香烃受体配体结合区的影响

芳香烃受体(Aryl hydrocarbon receptor,AhR)属于配体依赖性的转录因子蛋白。本文通过对AhR配体结合区域(Ligand binding domain,LBD)的结构功能及物种特异性分析,发现在其结合腔口有一些关键残基可能起到"门控"作用,进一步将野生型(WT)和3个突变模型(Phe289Ala、Tyr316Ala、Ile319Ala)进行分子动力学模拟,从蛋白稳定性、蛋白结构变化、蛋白结合腔变化及蛋白和配体结合能力4个方面分析3个残基的门控作用。研究发现,Phe289、Tyr316、Ile319氨基酸残基通过形成疏水作用为AhR LBD起到"门控"作用;而将这些氨基酸分别突变后,其蛋白稳定性降低,整体运动性增加,配体亲和力减弱,其中Tyr316、Ile319对腔内体积影响较大,Phe289使腔内环境稳定性降低。本研究可为基于芳香烃受体的药物设计提供相关理论指导。     

臭氧化对水厂水中卤代消毒副产物生成势的影响

以某饮用水厂沿程工艺出水为研究对象,研究了臭氧化预处理对水体中卤代消毒副产物(DBPs)生成势的影响。结果表明,臭氧氧化对不同卤代DBPs生成势的影响不尽相同。此外,水厂生物处理单元产生的胞外聚合物(EPS)和溶解性微生物产物(SMP)等生物源有机物是非常有效的DBPs前体物,但其更易于氯化生成三卤甲烷(THMs)而非卤乙酸(HAAs)。其中,水厂水中存在的THMs前体物主要是各类大分子量有机物,并且臭氧工艺对其有较好的氧化去除效果。水厂水中经臭氧氧化产生的小分子量有机物可能是更为有效的一氯乙酸(MCAA)和一溴乙酸(MBAA)前体物。此外,当水体中三氯乙酸(TCAA)前体物浓度较高时,臭氧工艺对TCAA生成势具有很好的去除效果。     

邻甲苯胺修饰的超高交联吸附树脂对氯酚的吸附研究

通过后交联反应和化学修饰制备了邻甲苯胺修饰的超高交联吸附树脂(OTMR),对其结构性质进行了表征。通过吸附动力学实验和等温吸附实验,探讨了OTMR对溶液中4-氯酚(4-CP)、2,4-二氯酚(2,4-DCP)和2,4,6-三氯酚(2,4,6-TCP)的吸附性能。实验结果表明,OTMR树脂具有较高的的比表面积和较丰富的微孔,对3种氯酚均具有良好的吸附性能。OTMR树脂对3种氯酚的吸附动力学过程符合准一级动力学方程,颗粒内扩散和液膜作用均是吸附速率的控制步骤。OTMR对4-CP和2,4-DCP以氢键、π-π作用形成的物理吸附为主;而对2,4,6-TCP的吸附过程还存在化学键形成的化学吸附作用。Langmuir等温方程能较好地拟合OTMR对3种氯酚的吸附等温线。OTMR对4-CP和2,4-DCP的吸附是自发、放热、熵减小的过程;而对2,4,6-TCP的吸附为自发、吸热、熵增加的过程。     

顶空固相微萃取气相色谱法测定浓海水中的氯酚

建立浓海水中氯酚的顶空固相微萃取气相色谱法检测方法。采用顶空固相微萃取对海水淡化排放的浓海水样品中2,4,6-三氯酚(2,4,6-TCP)和五氯酚(PCP)进行分离富集,气相色谱-电子捕获检测器(μECD)测定浓海水样品中2,4,6-TCP和PCP的含量。讨论了萃取时间、萃取温度、水样盐度等实验条件对富集效率的影响,确定了萃取时间为40 min,萃取温度为60℃。2,4,6-TCP,PCP的质量浓度在0.500~20.0μg/L范围内与其色谱峰面积呈良好的线性关系,线性相关系数均大于0.999,2,4,6-TCP和PCP的检出限(2S/N)分别为0.055,0.128μg/L,测定结果的相对标准偏差为3.65%~11.4%(n=6),加标回收率为73.5%~119.0%。该方法快速,灵敏度高,适合于浓海水中氯酚的分析。     

GC-MS方法诊断新生儿苯丙酮尿症

用甲醇提取血样中的苯丙氨酸(Phe)、酪氨酸(Tyr),提取液离心去蛋白质,用正丁醇将其中的苯丙氨酸和酪氨酸丁酯比,再用三氟醋酸酐酰化后进行GC-MS分析,测定Phe,Tyr特征离子峰面积,用外标法计算出Phe和Tyr的摩尔浓度,根据Phe和Tyr摩尔浓度比值来诊断新生儿苯丙酮尿症(PKU)。     

芳香氨基酸光敏化瞬态产物的光谱学及动力学表征

运用KrF激光闪光光解瞬态吸收光谱 ,以丙酮为光敏剂 ,研究了水溶液中芳香氨基酸的光化学反应 .通过动力学分析和猝灭实验 ,鉴别了光化学反应过程中的瞬态产物 ,获取了激发三重态的瞬态吸收光谱及动力学参数 .在丙酮存在下 ,色氨酸(Trp)和酪氨酸 (Tyr)的水溶液光解 ,分别观察到Trp激发三重态、N中心色氨酸自由基 (Trp/N·)和酪氨酸的酚氧自由基 (Tyr/O·) ,阐述了二者是丙酮三重态与Trp ,Tyr分别通过三重态 三重态 (T T)激发能转移和电子转移生成 ;苯丙氨酸 (Phe)不能与丙酮三重态进行激发能转移和电子转移 .进一步 ,在色氨酰酪氨酸 (Trp Tyr)敏化光解过程中 ,观察到分子内的电子转移 ,即Trp/N· Tyr→Trp Tyr/O·自由基的生成过程 .     

Adsorption of phenols from contaminated water through titania-silica mixed imidazolium based ionic liquid: Equilibrium,kinetic and thermodynamic modeling studies

The present study describes the synthesis and characterization of titania-silica mixed imidazolium based ionic liquid (Ti-Si-IL) as well as evaluation of its adsorption behavior towards the 2,4-dinitrophenol (2,4-DNP) and 2,4,6-trichlorophenol (2,4,6-TCP). Synthesized Ti-Si-IL adsorbent was characterized by Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), BET surface area Brunauer-Emmett-Teller (BET), thermogravimetric analysis (TGA) and elemental analysis (CHN). The adsorption of 2,4-DNP and 2,4,6-TCP on Ti-Si-IL was investigated systematically by evaluating the effects of adsorbent dosage, initial pH, contact time and temperature. Satisfactory adsorption 95% and 65% for 2,4-DNP and 2,4,6-TCP was observed at pH 4 and 6, respectively. The kinetic results for 2,4-DNP and 2,4,6-TCP on Ti-Si-IL indicated that the kinetic data follows pseudo-second-order model (R² = 0.9985 and 0.9750, respectively). Adsorption isotherms were fitted well by the Langmuir model for 2,4-DNP (q_m = 44.64 mg g^?1 at 318 K) and Freundlich model for 2,4,6-TCP (K_F = 0.63 mg g^?1 at 318 K). The +ΔH° and -ΔG° values demonstrated that the adsorption of 2,4-DNP was endothermic and spontaneous in nature. While the -ΔH° and +ΔG° values for 2,4,6-TCP adsorption demonstrated exothermic and comparatively nonspontaneous. During the removal process, the role of different functional groups, cyclic structure was monitored and found that the ionic property as well as π-π interactions of host molecules played important role in the extent of adsorption.     

Structure of chlorinated poly(vinyl chloride). XII. Configuration and reactivity of low-molecular-weight models of poly(vinyl chloride) in the course of chlorination

The chlorination of poly(vinyl chloride) (PVC) was investigated by means of low-molecular-weight models of PVC—a dimer and trimer of PVC, viz., 2,4-dichloropentane (2,4-DCP) and 2,4,6-trichloroheptane (2,4,67-TCH). Chlorinations of stereoisomeric mixtures of 2,4-DCP and 2,4,6-TCH have revealed that the d,1 form of 2,4-DCP (syndio-2,4-DCP) is more reactive in the chlorination than the meso form of 2,4-DCP (iso-2,4-DCP), while in the case of the chlorination of 2,4,6-TCH the reactivity of stereoisomers decreases in the order iso-> hetero->syndio-2,4,6-TCH; consequently, analogous structures of stereoisomers of 2,4-DCP and 2,4,6-TCH react in a reverse order and not in the same one. The qualitative order of reactivities of stereoisomers may be correlated formally with the magnitude of their dipole moments. The reactivity of stereoisomers of 2,4-DCP and 2,4,6-TCH decreases with increasing dipole moment.     

Effective synthesis of cyclic peptide yunnanin C and analogues via Ser/Thr ligation (STL)-mediated peptide cyclization

Cyclic peptide yunnanin C isolated from the root of Stellaria yunnanensis was efficiently synthesized in which the linear peptide was prepared by Boc-SPPS and the cyclization was realized by serine/threonine ligation (STL)-mediated cyclization. In addition, nine yunnanin C analogues, including mutations of Tyr7Gly, Tyr7Val, Tyr7Pro, Tyr7Phe, Ser1Thr, Pro2Val, Gly5Pro, Phe6Ala and Ile4Ala, were prepared in the same fashion. Here, we demonstrated that STL-mediated peptide cyclization could be an effective approach to construct cyclic peptides. Except that proline at the C-terminus could retard the cyclization process, cyclization of yunnanin C analogues with various C-terminal amino acids proceeded with fast cyclization rate (<4 h) and only trace amount of dimers (<5%) at a working concentration of 5 mM.     

Comparative studies on the oxidative dechlorination of chlorophenols by a superoxide complex

Transition Metal Chemistry - The chlorophenols (CPs), 4-chlorophenol (4-CP), 2,4-dichlorophenol (2,4-DCP) and 2,4,6-trichlorophenol (2,4,6-TCP), are potent environmental hazards. They can be...     

Determination of phenol in landfill leachate by using microchip capillary electrophoresis with end-channel amperometric detection

Phenol, 2,4-dichlorophenol (2,4-DCP), and 2,4,6-trichlorophenol (2,4,6-TCP) were baseline separated by using a homemade microchip CE with an end-channel amperometric detector where a 50 microm Pt microdisk working electrode (WE) and a Pt cathode were integrated onto the microchip itself. Separation parameters such as injection time and voltage, pH of the buffer, online pretreatment condition for WE, reproducibility, and detection potential were investigated. Under the selected separation conditions, the linear ranges for phenol, 2,4-DCP, and 2,4,6-TCP were 2-200, 4-400, and 4-400 microM, respectively. The LODs were 0.4, 0.5, and 0.7 microM for phenol, 2,4-DCP, and 2,4,6-TCP, respectively (S/N = 3). The standard addition method was successfully applied to the analysis of landfill leachate samples and the concentration of phenol in the landfill leachate samples was measured to be 0.32 and 0.21 mM, respectively. The recoveries were in the range of 85-103% and corresponding RSDs were less than 5.5%.     

Evaluation of liquid-phase microextraction conditions for determination of chlorophenols in environmental samples using gas chromatography-mass spectrometry without derivatization

Determination of trace chlorophenols (CPs) in environmental samples has been evaluated using liquid-phase microextraction (LPME) coupled with gas chromatography-mass spectrometry (GC-MS) without derivatization. The LPME procedure used to extract CPs from water involved 15 microL 1-octanol as acceptor solution in a 5.0 cm polypropylene hollow fiber with an inner diameter of 600 microm and a pore size of 0.2 microm. Under the optimal extraction conditions, enrichment factors from 117 to 220 are obtained. The obtained linear range is 1-100 ng mL(-1) with r(2)=0.9967 for 2,4-dichlorophenol (2,4-DCP); 1-100 ng mL(-1) with r(2)=0.9905 for 2,4,6-trichlorophenol (2,4,6-TCP); 5-500 ng mL(-1) with r(2)=0.9983 for 2,3,4,6-tetrachlorophenol (2,3,4,6-TeCP), and 10-1000 ng mL(-1) with r(2)=0.9929 for pentachlorophenol (PCP). The limits of detection range from 0.08 to 2 ng mL(-1), which is comparable with the reported values (12-120 ng mL(-1)). Recoveries of CPs in various matrices exceed 85% with relative standard deviations of less than 10%, except for PCP in landfill leachate. The applicability of this method was examined to determine CPs in environmental samples by analyzing landfill leachate, ground water and soil. The 2,4-DCP and 2,4,6-TCP detected in the landfill leachate are 6.68 and 2.47 ng mL(-1). The 2,4,6-TCP detected in ground water is 2.08 ng mL(-1). All the studied CPs are detected in contaminated soil. The proposed method is simple, low-cost, less organic solvent used and can potentially be applied to analyze CPs in complex environmental matrices.     

饮用水消毒溴代副产物及其健康风险

受海水入侵影响严重的沿海地区,其饮用水源中常含有较高浓度的溴离子.研究表明,当原水中含有溴离子时,经氯化消毒、氯胺消毒或臭氧消毒后会增加溴代消毒副产物的形成,并且溴代副产物具有更高的遗传毒性.因此,对于溴代副产物的研究更具实际意义.现阶段国内对于消毒所产生的溴代副产物的研究很少.本文针对溴代副产物更高的健康风险,从其产生的原因、机理、影响因素及遗传毒性等方面进行了综述.     

Amino acids of ricin and its polypeptides

Ricin and its corresponding polypeptides (A & B chain) were purified from castor seed. The molecular weight of ricin subunits were 29,000 and 28,000 daltons. The amino acids in ricin determined were Asp45 The22 Ser40 Glu53 Cys4 Gly96 His5 Ile21 Leu33 Lys20 Met4 Phe13 Pro37 Tyr11 Ala45 Val23 Arg20 indicating that ricin contains approximately 516 amino acid residues. The amino acids of the two subunits of ricin A and B chains were Asp23 The12 Ser21 Glu29 Cys2 Gly48 His3 Ile12, Leu17 Lys10 Met2 Phe6 Pro17 Tyr7 Ala35 Val13 Arg13 while in B chain the amino acids were Asp22 The10 Ser19 Glu25 Cys2 Gly47 His1 Ile10, Leu15 Lys11 Met1 Phe7 Pro6 Tyr5 Ala32Val11 Arg10. The total helical content of ricin came around 53.6% which is a new observation.     

A flow injection biosensor system for highly sensitive detection of 2,4,6-trichlorophenol based on preoxidation by ceric sulfate.

A flow injection biosensor system was proposed for the highly sensitive detection of 2,4,6-trichlorophenol (2,4,6-TCP). The system is based on the preoxidation by ceric sulfate to the corresponding benzoquinone (2,6-dichloro-1,4-benzoquinone: 2,6-DC-1,4-BQ), which was characterized using cyclic voltammetry, hydrodynamic voltammetry, and UV-vis spectrophotometry. The laccase-based biosensor used in this analytical system responded sensitively to 2,4,6-TCP after the preoxidation by ceric sulfate. The response could be based on the bioelectrocatalytic recycling of oxidation product (2,6-DC-1,4-BQ) between laccase membrane and the electrode, because the oxidation product (2,6-DC-1,4-BQ) of 2,4,6-TCP was an electrochemically reversible redox species. The signal current was linearly related to the 2,4,6-TCP concentrations in a dynamic range of 2 nM - 2 microM; the slope and the y-intercept of the straight line were 1150 nA microM(-1) and 0.88 nA, respectively. The detection limit was 1.2 nM (S/N = 3) for a 20 microl injection. Among a variety of chlorophenols and some phenolic compounds, the only interferent was 2,4-dichlorophenol.     

Sorption and desorption of organic matter on solid‐phase extraction media to isolate and identify N‐nitrosodimethylamine precursors

#x02010;Nitrosodimethylamine is mutagenic in rodents, a drinking water contaminant, and a byproduct of drinking water disinfection by chloramination. Nitrosodimethylamine precursor identification leads to their control and improved understanding of nitrosodimethylamine formation during chloramination. Mass balances on nitrosodimethylamine precursors were evaluated across solid‐phase extraction cartridges and in eluates to select the best combination of solid‐phase media and eluent that maximized recovery of nitrosodimethylamine precursors into a solvent amenable to time‐of‐flight mass spectrometry analysis. After reviewing literature and comparing various solid‐phase cartridges and eluent combinations, a method was obtained to efficiently recover nitrosodimethylamine precursors. The approach with the greatest recoveries of nitrosodimethylamine precursors involved cation exchange resin loaded with water samples at pH 3 and eluted with 5% NH₄OH in methanol. This indicated that nitrosodimethylamine precursors are amines that protonate at low pH and deprotonate at high pH. Quaternary amines were irreversibly sorbed to the cation exchange cartridge and did not account for a large fraction of precursors. Overall, a median recovery of 82% for nitrosodimethylamine precursors was achieved from 11 surface waters and one wastewater. Applying this method allowed discovery of methadone as a new nitrosodimethylamine precursor in wastewater effluent and drinking water treatment plant intakes.