A europium(III) organic ternary complex applied in fabrication of?near UV-based white light-emitting diodes

A β-diketone, 2-acetylfluorene-4,4,4-trifluorobutane-1,3-dione (HAFTFBD), and its three europium(III) complexes, Eu(AFTFBD)₃⋅2H₂O, Eu(AFTFBD)₃(TPPO)₂ and Eu(AFTFBD)₃phen, were designed and synthesized, where TPPO was triphenylphosphine oxide and phen was 1,10-phenanthroline. The complexes were characterized by IR, UV-visible, photoluminescence (PL) spectroscopy and thermogravimetric analysis (TGA). The results show that the Eu(III) complexes exhibit a high thermal stability,and wide and strong excitation bands when monitored at 613 nm. Excited by ∼395 nm near UV light, the complexes emitted strong and characteristic red light due to f–f transitions of the central Eu³⁺ ion, and no emission from the ligands was found. The photoluminescence mechanism of the europium(III) complexes was investigated and proposed as a ligand-sensitized luminescence process. Among the three europium(III) complexes, Eu(AFTFBD)₃phen exhibits the highest thermal stability and the most excellent photoluminescence properties. A bright red light-emitting diode was fabricated by coating the Eu(AFTFBD)₃phen complex onto an ∼395 nm-emitting InGaN chip, and the LED showed appropriate CIE chromaticity coordinates (x=0.66, y=0.33). A white LED with CIE chromaticity coordinates (x=0.32, y=0.32) was prepared with Eu(AFTFBD)₃phen as red phosphor, indicating that Eu(AFTFBD)₃phen can be applied as a red component for fabrication of near ultraviolet-based white light-emitting diodes.     

Photoluminescence of fluoroacrylate polymers impregnated with Eu(bta)<Subscript>3</Subscript> using supercritical CO<Subscript>2</Subscript>

Optical properties (photoluminescence and absorption) of Eu(bta)₃(B) _n (B = H₂O or 1,10-phenanthroline) polycrystalline powders and fluoroacrylate polymers (FAPs) impregnated with these compounds using supercritical CO₂ (SC CO₂) were investigated. It was established that impregnation of Eu(bta)₃phen into the FAPs using an SC CO₂ solution was difficult to achieve. The type of B (ancillary ligand) and the polymer matrix were shown to influence the temperature quenching of photoluminescence of Eu³⁺ ions in the range 25–100°C. A comparative analysis of quantum yields (λ_ex = 300 and 380 nm) and photoluminescence decay times (λ_ex = 337.1 nm) for Eu(bta)₃B _n and for Eu(bta)₃B _n -doped FAPs was performed.     

Luminescent europium(III) and terbium(III) nicotinate complexes covalently linked to a 1,10-phenanthroline functionalised sol-gel glass

Sol-gel glasses with covalently linked lanthanide complexes are luminescent materials which can be processed at ambient temperatures, which have a good solubility and uniform distribution of the complexes in the host matrix. In this study, a luminescent terbium(III) complex was covalently coupled to an organic-inorganic hybrid material prepared by the sol-gel process. This was realised by use of nicotinate groups as the ligands for the terbium(III) ion. The [Tb(C₅H₄NCO₂)₃(phen)(H₂O)₂] complex was immobilised on the sol-gel glass matrix and showed a green photoluminescence upon irradiation with ultraviolet light. The nicotinate groups act as an antenna to absorb the incident light and channel the excitation energy to the terbium(III) ion. The sol-gel glass was also prepared for the corresponding europium(III) complex. In this case, excitation of the europium(III) ion was possible via both the nicotinate ligands and the 1,10-phenanthroline ligands. High-resolution luminescence and excitation spectra were recorded and the radiative lifetimes were measured.     

Electrical conductivity and luminescence of metal-organic nanocomposites

We presented the results of experimental study of electrical and luminescence properties of planar nanocomposites based on gold island films and layers of efficient organic luminophores — aluminum (III) 8-hydroxyquinolinate (Alq₃) and europium β-diketonates [Eu(DBM)₃ bath, Eu(DBM)₃ phen, and Eu(DBM)₃]. The mechanisms of electroluminescence of such hybrid systems are discussed and the processes of luminescence excitation in the organic component of nanocomposites are considered in detail. It is shown that the spectral characteristics of europium β-diketonates are controlled by the Eu³⁺ ion fluorescence. The proposed mechanisms of nanocomposite electroluminescence are confirmed by the results of measurements of cathodoluminescence spectra of organic luminophores.     

Structural Investigation and Photoluminescent Properties of Gadolinium(III), Europium(III) and Terbium(III) 3-Mercaptopropionate Complexes

This work reports on the synthesis, crystallographic determination and spectroscopic characterization of gadolinium(III), terbium(III) and europium(III) 3-mercaptopropionate complexes, aqua-tris(3-mercaptopropionate)lanthanide(III) - [Ln(mpa)₃(H₂O)]. The Judd-Ofelt intensity parameters were experimentally determined from emission spectrum of the [Eu(mpa)₃(H₂O)]complex and they were also calculated from crystallographic data. The complexes are coordination polymers, where the units of each complex are linked together by carboxylate groups leading to an unidimensional and parallel chains that by chemical interactions form a tridimensional framework. The emission spectrum profile of the [Eu(mpa)₃(H₂O)] complex is discussed based on point symmetry of the europium(III) ion, that explains the bands splitting observed in its emission spectrum. Photoluminescent analysis of the [Gd(mpa)₃(H₂O)] complex show no efficient ligand excitation but an intense charge transfer band. The excitation spectra of the [Eu(mpa)₃(H₂O)] and [Tb(mpa)₃(H₂O)] complexes do not show evidence of energy transfer from the ligand to the excited levels of these trivalent ions. Therefore the emission bands are originated only by direct f-f intraconfigurational excitation of the lantanide(III) ions.     

Europium-sensitized Chemiluminescence of System Tetracycline–H<Subscript>2</Subscript>O<Subscript>2</Subscript>–Fe(II)/(III) and Its Application to the Determination of Tetracycline

Chemiluminescence (CL) of the reaction system tetracycline–H₂O₂–Fe(II)/(III)–Eu(III) was used for the determination of tetracycline hydrochloride in water, pharmaceutical preparations, and honey. The CL spectrum registered for this system shows emission bands typical of Eu(III) ions, with a maximum at λ ∼ 600 nm, corresponding to the electronic transitions of ⁵D₀ → ⁷F₁ and ⁵D₀ → ⁷F₂. A strong chemiluminescence intensity characteristic of europium(III) ions in the system tetracycline–H₂O₂–Fe(II)/(III)–Eu(III), as contrasted to the emission of the system tetracycline–H₂O₂–Fe(II)/(III) without Eu(III), proves that the Eu(III) ion plays the role of a chemiluminescence sensitizer, accompanying tetracycline oxidation in the Fenton system (H₂O₂–Fe(II)/(III)). A linear dependence was observed for the integrated CL light intensity on the tetracycline concentration in the range of 2 × 10⁻⁷ to 3 × 10⁻⁵ mol l⁻¹ with the detection limit of 5 × 10⁻⁸ mol l⁻¹ in aqueous solution.     

Influences of compositions and ligands on photoluminescent properties of Eu(III) ions in composite europium complex/PMMA systems

Three kinds of europium complexes; Eu(phen)₂Cl₃(H₂O)₂, Eu(DN-bpy)phenCl₃(H₂O)₂ and Eu(DB-bpy)phenCl₃(H₂O)₂ (phen: 1,10-phenanthroline, DN-bpy: 4,4′-Dinonyl-2,2′-dipyridyl, DB-bpy: 4,4′-Di-tert-butyl-2,2′-dipyridyl) were prepared and then incorporated into polymethyl methacrylate (PMMA) matrix with different molar ratios of CO groups/Eu³⁺ ions. The final solid composites were formed by a self-assembly process among Eu³⁺ ion, the ligands and PMMA during the solvent evaporation process, and then the ligands re-coordinate to Eu(III). It was found that the ligands affect not only the emission properties of the pure complexes, but also the miscibility of the complexes and PMMA. More than one kind of symmetric sites of Eu³⁺ ions were formed in the composites due to the coordination of CO in PMMA to Eu³⁺ ions. The micro-environments of Eu(III) in the composites were changed with the compositions and the ligands, leading to the change in the crystalline structure, and consequently, the emission characteristics.     

Preparation, Crystal Structures and Luminescent Properties of Terbium and Europium Complexes with a New Amino-Alkenone Type Ligand

Solid complexes of terbium and europium nitrates with an amino-alkenone type ligand, 1-[2-(6-methylpyridin-2-ylamino)-5,6-dihydro-4H-pyran-3-yl]ethanone (L) have been prepared and characterized by elemental analysis, conductivity measurements, and IR spectra. The crystal and molecular structures of the complexes [TbL₂(NO₃)₃(H₂O)]·CHCl₃ (1) and [EuL₂(NO₃)₃(H₂O)]·CH₃CO₂C₂H₅ (2) have been determined by single crystal X-ray diffraction. And the coordination spheres of the complexes are similar. At the same time, the luminescent properties of the Tb³⁺ complex in solid state and in solvents were investigated at room temperature. Under the excitation of UV light, Tb(III) complex exhibited characteristic emissions but not for the Eu(III) complex. The lowest triplet state energy level of the ligand in the complex matches better to the resonance level of Tb(III) than Eu(III) ion.     

An efficient 2-linked carbazolyl β-diketonate europium(III) complex as red phosphor applied in LED

An efficient 2-linked carbazolyl β-diketonate europium(III) complex Eu(ETFMCTFBD)₃phen was designed and synthesized, where ETFMCTFBD was 1-(9-ethyl-7-(trifluoromethyl)-9H-carbazol-2-yl)-4,4,4-trifluorobutane-1,3-dione and phen was 1,10-phenanthroline. Eu(ETFMCTFBD)₃phen exhibits high thermal stability and excellent photoluminescence properties. The CIE chromaticity coordinates (x=0.668, y=0.331) are close to the National Television Standard Committee (NTSC) standard values for red. The lowest triplet energy was measured and suggests the photoluminescence process as a ligand-sensitized luminescence process (antenna effect). A bright red light-emitting diode was fabricated by coating the complex phosphor onto a ∼395 nm-emitting InGaN chip. All the results indicate that Eu(ETFMCTFBD)₃phen is a good candidate as a red component in the fabrication of white LEDs with a high color-rendering index.     

Synthesis and luminescence of Eu(III) complexes with macrocyclic azacrown ethers and 1,10-phenanthroline

Complexes of Eu(III) with mixed macrocyclic azacrown ethers and 1,10-phenanthroline (phen) were synthesized and their luminescence properties measured. The specific azacrown ethers used were 1,4,8,11-tetraazacyclotetradecane-1,4,8,11-tetraacetate (TETA) and 1,4,8,12-tetraazacyclopentadecane ([15]aneN₄). The phen-coordinated complexes excited by UV light produced a very bright red emission via an intra-molecular energy transfer from phen to Eu(III). For [Eu(TETA)·(phen)·(H₂O)]⁻ and [Eu([15]aneN₄)·(phen)₂]³⁺, the quantum yields of sensitized luminescence were 8.4% and 7.8%, respectively, and were much greater than those from non-sensitized luminescence of 1.2% and 4.4%, respectively. The decay times of the corresponding phen-coordinated complexes, as measured at room temperature, were 1.6 and 0.6 ms, respectively, and were much longer than those of the phen-uncoordinated complexes of 0.3 and 0.2 ms, respectively.     

Synthesis of Novel Eu(III) Luminescent Probe Based on 9- Acridinecarboxylic Acid Skelton for Sensing of ds-DNA

Eu(III)-9-acridinecarboxylate (9-ACA) complex was synthesized and characterized by elemental analysis, conductivity measurement, IR spectroscopy, thermal analysis, mass spectroscopy, ¹H-NMR, fluorescence and ultraviolet spectra. The results indicated that the composition of this complex is [Eu(III)-(9-ACA)₂(NCS)(C₂H₅OH)₂] 2.5 H₂O and the oxygen of the carbonyl group coordinated to Eu(III). The interaction between the complex with nucleotides guanosine 5′- monophosphate (5′-GMP), adenosine 5′-diphosphates (5′-ADP), inosine (5′-IMP) and CT-DNA was studied by fluorescence spectroscopy. The fluorescence intensity of Eu(III)-9-acridinecarboxylate complex was enhanced with the addition of CT-DNA. The effect of pH values on the fluorescence intensity of Eu(III) complex was investigated. Under experimental conditions, the linear range was 9–50 ng mL⁻¹ for calf thymus DNA (CT- DNA) and the corresponding detection limit was 5 ng mL⁻¹. The results showed that Eu(III)-(9-ACA)₂ complex binds to CT-DNA with stability constant of 2.41 × 10⁴ M .     

Study of Enhanced Chemiluminescence of Diperiodatocuprate (III) on 1,10-Phenanthroline/Hydrogen Peroxide/Cetyltrimethylammonium Bromide System

In the paper, a chemiluminescence (CL) system was developed based on the catalytical effect of diperiodatocuprate (III) (DPC) on the 1,10-phenanthroline (phen)/hydrogen peroxide (H₂O₂) in the presence of cetyltrimethylammonium bromide (CTAB). The effects of experimental conditions were investigated. Meanwhile the increase of CL intensity of the DPC/phen/H₂O₂/CTAB system is proportional to the concentration of phen in the range of low concentration. The linear range of the calibration curve is 5.0 × 10⁻⁹–1.0 × 10⁻⁶ mol L⁻¹, and the corresponding detection limit is 1.9 × 10⁻⁹ mol L⁻¹. The effects of phenolic compounds (PCs) on the system were investigated. Hydroquinone was used as an example to investigate the application of the CL system to the determination of PCs. The quenched CL intensity is linearly related to the logarithm of concentration of hydroquinone. The linear range of the calibration curve is 2.5 × 10⁻⁹–1.0 × 10⁻⁵ g mL⁻¹, and the corresponding detection limit is 1.8 × 10⁻⁹ g mL⁻¹. This phen and hydroquinone can be synchronously determined. The method was applied to the determination of hydroquinone in water samples and the recoveries were from 92% to 106%.     

Highly improved electroluminescence from double-layer devices based on a carbazole-functionalized europium<Superscript>3+</Superscript> complex

A novel europium complex Eu(TTA)₃(CPPO)₂ (1) (TTA=thenoyltrifluoroacetone, CPPO=9-[4-(diphenyl-phosphinoyl)-phenyl]-9H-carbazole) based on the phosphine oxide ligand with bipolar structure was used to fabricate double-layer devices. The strong hole injection and transport ability of 1 was proved. The luminance of 414 cd m⁻² was achieved with the device configuration ITO/Eu(TTA)₃(CPPO)₂(40 nm)/BCP (30 nm)/Mg:Ag (BCP = 2, 9-dimethyl-4, 7-diphenyl-1, 10-phenanthroline), which is favorable among double-layer organic light emitting devices based on small molecular Eu³⁺ complexes. The maximum current efficiency of 2.44 cd A⁻¹ and external quantum efficiency of 1.55% demonstrate the potential application of 1 as a promising candidate for high-efficiency, simple-structure and pure red-emitting devices.     

Relative Study of Luminescent Properties with Judd-Ofelt Characterization in Trivalent Europium Complexes Comprising ethyl-(4-fluorobenzoyl) Acetate

Five new europium(III) complexes Eu(p-EFBA)₃.(H₂O)₂ (C1), Eu(p-EFBA)₃.neo (C2), Eu(p-EFBA)₃.batho (C3), Eu(p-EFBA)₃.phen (C4), Eu(p-EFBA)₃.bipy (C5) have been synthesized by using ethyl-(4-fluorobenzoyl) acetate (p-EFBA) as β-ketoester ligand and neocuproine (neo), bathophenanthroline (batho), 1,10-phenanthroline (phen) and 2,2-bipyridyl (bipy) as ancillary ligands. The synthesized complexes C1-C5 were characterized by elemental analysis, nuclear magnetic resonance spectroscopy (¹H-NMR), infrared (IR) spectroscopy, thermogravimetric analysis (TG/DTG), UV-visible and photoluminescence (PL) spectroscopy. The relative study of luminescence spectra of complexes with the previously reported complexes of isomeric ligand (ortho and meta substituted ligand) indicate the higher luminescence properties of complexes as an effect of fluorine position on β-ketoester ligand. The para substituted ligand shows a remarkable effect on quantum efficiencies and Judd-Ofelt intensity parameters (Ω_2, Ω₄) of the complexes. The higher value of intensity parameter Ω₂ associated with hypersensitive ⁵D₀ → ⁷F₂ transition of europium(III) ion revealing highly polarizable ligand field. The purposed energy transfer mechanism of complexes indicates the efficient energy transfer in complexes.     

The Co-luminescence Effect of Eu–Gd–Ofloxacin–SDBS System and its Analytical Application

A fluorescence enhancement phenomenon in the europium (Eu)–Ofloxacin (OF)–Sodium Dodecyl Benzene Sulfonate (SDBS) fluorescence system was observed when Gd³⁺ was added. The fluorescence intensity of the systems was measured (λ _ex/λ _em = 280/612 nm) at pH 7.8. Under optimum conditions, a linear relationship between the enhanced fluorescence intensity and the Eu³⁺ concentration in the range of 5.0 × 10⁻¹⁰ ∼ 2.0 × 10⁻⁷ mol·L⁻¹ was observed. The detection limit of Eu³⁺ was 1.46 × 10⁻¹⁰ mol·L⁻¹ (S/N = 3). This method was used for the determination of trace amounts of europium in synthetic rare earth samples with satisfactory results. In addition, the interaction mechanism is also studied.     

Spectroscopic studies of the lanthanide(III) ions with pyridine carboxylic acid N-oxide ligands and in mixed ligand complexes

A series of Ln(III) complexes with pyridine carboxylic acid-N-oxides (L) Ln-L, and mixed ligand complexes of Ln-L plus bipyridine (bipy) or 1,10-phenanthroline (O-phen) (X) Ln-L-X have been studied. These complexes were characterized in solution using Nd(III) absorption in the spectral range of the ⁴I_9/2 → ⁴G_5/2 transition corresponding to the hypersensitive band, and in the solid state with the use of IR and Eu(III) luminescence spectroscopy. In solutions a series of Nd(III) complexes and mixed ligand complexes has been examined and the formation of binary LnL and LnL₂ complexes and mixed ligand LnL₂X complexes evidenced. Solid complexes of Eu(III) with nicotinic acid N-oxide and ternary with nicotinic acid N-oxide plus phen were studied with the use of Eu(III) luminescence lifetime measurements and IR spectroscopy, proving the formation of binary [Eu(nicN-oxide)₃(H₂O)₂].2H₂O and ternary [Eu(nicN-oxide)₃phen].H₂O complexes.     

Synthesis and luminescence properties of mesophase silica thin films doped with in-situ formed europium complex

Mesophase silica thin film doped with in-situ formed ternary Eu complex was synthesized by adding ligands (DBM=dibenzoylmethane, phen=1,10-phenanthroline), Eu ions (EuCl₃·6H₂O), and Pluronic P123 triblock copolymer into hydrolyzed tetramethoxy-silane (TMOS). The structure of this inorganic/organic film was characterized as a 2d-hexagonal structure by X-ray diffraction (XRD) and TEM analysis. The excitation spectra (λ_em=612 nm) and emission spectra (λ_ex=325 nm) indicated that the ternary complex, Eu-DBM-phen, was formed in-situ during the formation of the film. The mesophase silica thin film doped with the in-situ formed Eu complex showed a higher quantum efficiency compared to a pure Eu(DBM)₃phen complex and a mesophase silica thin film doped with in-situ formed binary Eu-phen complex.     

Luminescent molecular hybrid system derived from 2-furancarboxylic acid and silylated monomer coordinated to rare earth ions

In this study, silica-based organic-inorganic hybrids were prepared by the sol-gel method. Tetraethoxysilane (abbreviated as TEOS) and a kind of monomer (abbreviated as FA-APES) derived from modified 2-furancarboxylic acid (abbreviated as FA) with (3-aminopropyl)triethoxysilane (abbreviated as APES) were used as the inorganic and organic fragments, respectively. Coordination reaction between lanthanides (europium and terbium ions) and CO group of the monomer happened simultaneously. And after days of aging process the resultant materials showed characteristic luminescence of lanthanides. The enhancement of luminescence can be seen by the comparison with simply doped lanthanide hybrid systems. And it can be explained by the coordination ability of the organic counterpart. IR, NMR, UV-vis absorption, low-temperature phosphorescence spectroscopy and fluorescence spectroscopy were applied to characterize and the above spectroscopic data revealed that the triplet state energy of organic ligand matches with the emissive energy level of lanthanides (especially of Tb³⁺).     

纳米硅上的弯曲表面效应及其特征发光

纳米硅结构使能带的带隙展宽,并形成准直接能带带隙结构.弯曲表面上的某些键合可以在带隙中产生局域电子态,计算表明:纳米硅弯曲表面上的Si-N,Si=O和Si-O-Si键合能够分别在带隙中2.02 eV,1.78 eV和2.03 eV附近形成局域态子带,对应了实验光致荧光谱(PL)中605 nm处的LN线、693 nm处的LO1线和604 nm处的LO2线特征发光.特别是,Si-Yb键合在纳米硅弯曲表面上可以将发光波长调控到光通信窗口,在1310 nm到1600 nm范围形成LYb线特征发光.