Synthesis, characteristics and photoluminescent properties of novel Ir-Eu heteronuclear complexes containing 2-carboxyl-pyrimidine as a bridging ligand

Two novel iridium(III) complexes, [Ir(dfppy)(2)(pmc)] and [Ir(ppy)(2)(pmc)] (dfppy = 2-(4',6'-difluoro-phenyl)pyridine, ppy = 1-phenyl-pyridine), were designed and synthesized using 2-carboxyl-pyrimidine (Hpmc) as an ancillary ligand. Single crystals were obtained and characterized by single crystal X-ray diffraction. The tetrametallic complexes {[(C^N)(2)Ir(μ-pmc)](3)EuCl(3)} (C^N = dfppy, ppy) were synthesized using the iridium(III) complexes as "ligands". Photophysical and theoretical studies indicate that [Ir(dfppy)(2)(pmc)] is more suitable for sensitizing the emission of Eu(III) ions than [Ir(ppy)(2)(pmc)].     

Decreased Turn‐On Times of Single‐Component Light‐Emitting Electrochemical Cells by Tethering an Ionic Iridium Complex with Imidazolium Moieties

We report a significant decrease in turn‐on times of light‐emitting electrochemical cells (LECs) by tethering imidazolium moieties onto a cationic Ir complex. The introduction of two imidazolium groups at the ends of the two alkyl side chains of [Ir(ppy)₂(dC6‐daf)]⁺(PF₆)^? (ppy=2‐phenylpyridine, dC6‐daf=9,9′‐dihexyl‐4,5‐diazafluorene) gave the complex [Ir(ppy)₂(dC6MIM‐daf)]³⁺[(PF₆)^?]₃ (dC6MIM‐daf=9,9‐bis[6‐(3‐methylimidazolium)hexyl]‐1‐yl‐4,5‐diazafluorene). Both complexes exhibited similar photoluminescent/electrochemical properties and comparable electroluminescent efficiencies. The turn‐on times of the LECs based on the latter complex, however, were much lower than those of devices based on the former. The improvement is ascribed to increased concentrations of mobile counterions ((PF₆)^?) in the neat films and a consequent increase in neat‐film ionic conductivity. These results demonstrate that the technique is useful for molecular modifications of ionic transition‐metal complexes (ITMCs) to improve the turn‐on times of LECs and to realize single‐component ITMC LECs compatible with simple driving schemes.     

Polymerizable cationic iridium(III) complexes exhibiting color tunable light emission and their corresponding conducting metallopolymers

Cyclometalated iridium(III) complexes have been synthesized for use in a variety of photophysical applications, including polymer light emitting diodes (PLEDs). A series of new complexes with one electrochemically polymerizable ligand and two phenylpyridine(ppy)-based ligands have been prepared: [Ir(ppy)₂L][PF₆](1), [Ir(F-mppy)₂L][PF₆](2), and [Ir(Br-mppy)₂L][PF₆](3), where L = 3,8-bis(2,2′-bithien-5-yl)-1,10-phenanthroline. The ancillary ppy ligands can be easily varied synthetically to tune emission color of the monomer from blue–green to red. The solid state structure of complex 1 has been obtained by single crystal X-ray crystallography. Conducting polymer materials have been prepared by electropolymerization of monomers and were characterized through XPS analysis and spectroscopic studies.     

Acid-induced degradation of phosphorescent dopants for OLEDs and its application to the synthesis of tris-heteroleptic iridium(III) bis-cyclometalated complexes

Investigations of blue phosphorescent organic light emitting diodes (OLEDs) based on [Ir(2-(2,4-difluorophenyl)pyridine)(2)(picolinate)] (FIrPic) have pointed to the cleavage of the picolinate as a possible reason for device instability. We reproduced the loss of picolinate and acetylacetonate ancillary ligands in solution by the addition of Br?nsted or Lewis acids. When hydrochloric acid is added to a solution of a [Ir(C^N)(2)(X^O)] complex (C^N = 2-phenylpyridine (ppy) or 2-(2,4-difluorophenyl)pyridine (diFppy) and X^O = picolinate (pic) or acetylacetonate (acac)), the cleavage of the ancillary ligand results in the direct formation of the chloro-bridged iridium(III) dimer [{Ir(C^N)(2)(μ-Cl)}(2)]. When triflic acid or boron trifluoride are used, a source of chloride (here tetrabutylammonium chloride) is added to obtain the same chloro-bridged iridium(III) dimer. Then, we advantageously used this degradation reaction for the efficient synthesis of tris-heteroleptic cyclometalated iridium(III) complexes [Ir(C^N(1))(C^N(2))(L)], a family of cyclometalated complexes otherwise challenging to prepare. We used an iridium(I) complex, [{Ir(COD)(μ-Cl)}(2)], and a stoichiometric amount of two different C^N ligands (C^N(1) = ppy; C^N(2) = diFppy) as starting materials for the swift preparation of the chloro-bridged iridium(III) dimers. After reacting the mixture with acetylacetonate and subsequent purification, the tris-heteroleptic complex [Ir(ppy)(diFppy)(acac)] could be isolated with good yield from the crude containing as well the bis-heteroleptic complexes [Ir(ppy)(2)(acac)] and [Ir(diFppy)(2)(acac)]. Reaction of the tris-heteroleptic acac complex with hydrochloric acid gives pure heteroleptic chloro-bridged iridium dimer [{Ir(ppy)(diFppy)(μ-Cl)}(2)], which can be used as starting material for the preparation of a new tris-heteroleptic iridium(III) complex based on these two C^N ligands. Finally, we use DFT/LR-TDDFT to rationalize the impact of the two different C^N ligands on the observed photophysical and electrochemical properties.     

Understanding Electrogenerated Chemiluminescence Efficiency in Blue‐Shifted Iridium(III)‐Complexes: An Experimental and Theoretical Study

Compared to tris(2‐phenylpyridine)iridium(III) ([Ir(ppy)₃]), iridium(III) complexes containing difluorophenylpyridine (df‐ppy) and/or an ancillary triazolylpyridine ligand [3‐phenyl‐1,2,4‐triazol‐5‐ylpyridinato (ptp) or 1‐benzyl‐1,2,3‐triazol‐4‐ylpyridine (ptb)] exhibit considerable hypsochromic shifts (ca. 25–60 nm), due to the significant stabilising effect of these ligands on the HOMO energy, whilst having relatively little effect on the LUMO. Despite their lower photoluminescence quantum yields compared with [Ir(ppy)₃] and [Ir(df‐ppy)₃], the iridium(III) complexes containing triazolylpyridine ligands gave greater electrogenerated chemiluminescence (ECL) intensities (using tri‐n‐propylamine (TPA) as a co‐reactant), which can in part be ascribed to the more energetically favourable reactions of the oxidised complex (M⁺) with both TPA and its neutral radical oxidation product. The calculated iridium(III) complex LUMO energies were shown to be a good predictor of the corresponding M⁺ LUMO energies, and both HOMO and LUMO levels are related to ECL efficiency. The theoretical and experimental data together show that the best strategy for the design of efficient new blue‐shifted electrochemiluminophores is to aim to stabilise the HOMO, while only moderately stabilising the LUMO, thereby increasing the energy gap but ensuring favourable thermodynamics and kinetics for the ECL reaction. Of the iridium(III) complexes examined, [Ir(df‐ppy)₂(ptb)]⁺ was most attractive as a blue‐emitter for ECL detection, featuring a large hypsochromic shift (λ_max=454 and 484 nm), superior co‐reactant ECL intensity than the archetypal homoleptic green and blue emitters: [Ir(ppy)₃] and [Ir(df‐ppy)₃] (by over 16‐fold and threefold, respectively), and greater solubility in polar solvents.     

以3-乙酰基樟脑作为辅助配体的环金属铱配合物的合成及光电性能研究

以立体位阻3-乙酰基樟脑为辅助配体合成了系列新型的环金属铱配合物3-乙酰基樟脑-2-(2,4-二氟)苯基吡啶环金属铱配合物[(46dfppy)₂Ir(acam)], 3-乙酰基樟脑-2-苯基吡啶环金属铱配合物[(ppy)₂Ir(acam)], 3-乙酰基樟脑-2-苯并噻吩吡啶环金属铱配合物[(btp)₂Ir(acam)]. 将配合物的吸收光谱、光致发光光谱以及光致发光效率与辅助配体为乙酰丙酮(acac)的对应配合物进行了比较, 发现在配合物中引入具有大空间位阻的3-乙酰基樟脑使配合物的光致发光效率均有所提高. 并将(ppy)₂Ir(acam)用于有机电致发光器件, 电致发光光谱在516 nm 处有一最大强度峰, 驱动电压为12 V 时最大亮度为10930 cd/m², 最大亮度效率达到14.6 cd/A, 电压为10.7 V 时最大功率为4.23 lm/W, 亮度为698 cd/m².     

IrIII and RuII Complexes Containing Triazole‐Pyridine Ligands: Luminescence Enhancement upon Substitution with β‐Cyclodextrin

Novel 2‐(1‐substituted‐1H‐1,2,3‐triazol‐4‐yl)pyridine (pytl) ligands have been prepared by “click chemistry” and used in the preparation of heteroleptic complexes of Ru and Ir with bipyridine (bpy) and phenylpyridine (ppy) ligands, respectively, resulting in [Ru(bpy)₂(pytl‐R)]Cl₂ and [Ir(ppy)₂(pytl‐R)]Cl (R=methyl, adamantane (ada), β‐cyclodextrin (βCD)). The two diastereoisomers of the Ir complex with the appended β‐cyclodextrin, [Ir(ppy)₂(pytl‐βCD)]Cl, were separated. The [Ru(bpy)₂(pytl‐R)]Cl₂ (R=Me, ada or βCD) complexes have lower lifetimes and quantum yields than other polypyridine complexes. In contrast, the cyclometalated Ir complexes display rather long lifetimes and very high emission quantum yields. The emission quantum yield and lifetime (Φ=0.23, τ=1000 ns) of [Ir(ppy)₂(pytl‐ada)]Cl are surprisingly enhanced in [Ir(ppy)₂(pytl‐βCD)]Cl (Φ=0.54, τ=2800 ns). This behavior is unprecedented for a metal complex and is most likely due to its increased rigidity and protection from water molecules as well as from dioxygen quenching, because of the hydrophobic cavity of the βCD covalently attached to pytl. The emissive excited state is localized on these cyclometalating ligands, as underlined by the shift to the blue (450 nm) upon substitution with two electron‐withdrawing fluorine substituents on the phenyl unit. The significant differences between the quantum yields of the two separate diastereoisomers of [Ir(ppy)₂(pytl‐βCD)]Cl (0.49 vs. 0.70) are attributed to different interactions of the chiral cyclodextrin substituent with the Δ and Λ isomers of the metal complex.     

Effects of fluorine substituent on properties of cyclometalated iridium(III) complexes with a 2,2′-bipyridine ancillary ligand

Cationic cyclometalated Ir(III) complexes (Ir1-Ir5) with fluorine-substituted 2-phenylpyridine (ppy) derivatives as C^N cyclometalating ligands and 2,2′-bipyridine (bpy) as the ancillary ligand, have been synthesized and fully characterized. The influences of the number and the position of fluorine atoms at the cyclometalating ligands on the photophysical, electrochemical and oxygen sensing properties of the Ir(III) complexes have been investigated systematically. The introduction of fluorine on the C^N cyclometalating ligands of the complexes results in blue-shifts of the maximum emission wavelengths, and increases in the photoluminescence quantum yields (Φ_PL), phosphorescence lifetimes and energy gaps, compared to the non-fluorinated [Ir(ppy)₂(bpy)]⁺PF₆^? (Ir0). Among them, 2-(2,4-difluorophenyl)pyridine-derived Ir4 shows the maximum blue-shift (514 nm vs. 575 nm for Ir0) and the highest Φ_PL (50.8% vs. 6.5% for Ir0). The complex Ir3 with 2-(4-fluorophenyl)-5-fluoropyridine as C^N ligand exhibits the highest oxygen sensitivity and excellent operational stability in 10 cycles within 4000 s.     

Neutral and cationic cyclometallated Ir(III) complexes of anthra[1,2-d]imidazole-6,11-dione-derived ligands: Syntheses, structures and spectroscopic characterisation

The syntheses of two new ligands and five new heteroleptic cyclometallated Ir(III) complexes are reported. The ligands are based upon a functionalised anthra[1,2-d]imidazole-6,11-dione core giving LH¹⁻³ incorporating a pendant pyridine, quinoline or thiophene unit respectively. Neutrally charged, octahedral complexes [Ir(ppy)₂(L¹⁻³)] are chelated by two cyclometallated phenylpyridine (ppy) ligands and a third, ancillary deprotonated ligand L¹⁻³, whilst cationic analogues could only be isolated for [Ir(ppy)₂(LH¹⁻²)][PF₆]. X-ray crystal structures for [Ir(ppy)₂(L¹)], [Ir(ppy)₂(LH¹)][PF₆] and [Ir(ppy)₂(L²)] showed the complexes adopt a distorted octahedral coordination geometry, with the anthra[1,2-d]imidazole-6,11-dione ligands coordinating in a bidentate fashion. Preliminary DFT calculations revealed that for the complexes of LH¹ and LH² the LUMO is exclusively localized on the ancillary ligand, whereas the nature of the HOMO depends on the protonation state of the ancillary ligand, often being composed of both Ir(III) and phenylpyridine character. UV-vis. and luminescence data showed that the ligands absorb into the visible region ca. 400 nm and emit ca. 560 nm, both of which are attributed to an intra-ligand CT transition within the anthra[1,2-d]imidazole-6,11-dione core. The complexes display absorption bands attributed to overlapping ligand-centred and ¹MLCT-type electronic transitions, whilst only [Ir(ppy)₂(L²)] appeared to possess typical ³MLCT behaviour (λ_em = 616 nm; τ = 96 ns in aerated MeCN). The remaining complexes were generally visibly emissive (λ_em ≈ 560-570 nm; τ < 10 ns in aerated MeCN) with very oxygen-sensitive lifetimes more indicative of ligand-centred processes.     

Control of intramolecular π-π stacking interaction in cationic iridium complexes via fluorination of pendant phenyl rings

Intramolecular π-π stacking interaction in one kind of phosphorescent cationic iridium complexes has been controlled through fluorination of the pendant phenyl rings on the ancillary ligands. Two blue-green-emitting cationic iridium complexes, [Ir(ppy)(2)(F2phpzpy)]PF(6) (2) and [Ir(ppy)(2)(F5phpzpy)]PF(6) (3), with the pendant phenyl rings on the ancillary ligands substituted with two and five fluorine atoms, respectively, have been synthesized and compared to the parent complex, [Ir(ppy)(2)(phpzpy)]PF(6) (1). Here Hppy is 2-phenylpyridine, F2phpzpy is 2-(1-(3,5-difluorophenyl)-1H-pyrazol-3-yl)pyridine, F5phpzpy is 2-(1-pentafluorophenyl-1H-pyrazol-3-yl)-pyridine, and phpzpy is 2-(1-phenyl-1H-pyrazol-3-yl)pyridine. Single crystal structures reveal that the pendant phenyl rings on the ancillary ligands stack to the phenyl rings of the ppy ligands, with dihedral angles of 21°, 18°, and 5.0° between least-squares planes for complexes 1, 2, and 3, respectively, and centroid-centroid distances of 3.75, 3.65, and 3.52 ? for complexes 1, 2, and 3, respectively, indicating progressively reinforced intramolecular π-π stacking interactions from complexes 1 to 2 and 3. Compared to complex 1, complex 3 with a significantly reinforced intramolecular face-to-face π-π stacking interaction exhibits a significantly enhanced (by 1 order of magnitude) photoluminescent efficiency in solution. Theoretical calculations reveal that in complex 3 it is unfavorable in energy for the pentafluorophenyl ring to swing by a large degree and the intramolecular π-π stacking interaction remains on the lowest triplet state.     

Theoretical studies of blue-emitting iridium complexes with different ancillary ligands

The structural and electronic properties of two heteroleptic iridium complexes Ir(dfppy)2(pic) (FIrpic) and Ir(dfppy)2(acac) (FIracac) have been investigated theoretically, where dfppy = 2-(2,4-difluorophenyl) pyridine, pic = picolinic acid, and acac = acetoylacetonate. The geometries of ground and excited states are optimized at PBE0/LANL2DZ and CIS/LANL2DZ levels, respectively. Time-dependent density functional theory (TDDFT) method is employed to explore the absorption and emission properties. In the ground state, the highest-occupied molecular orbital has a significant mixture of metal Ir(d) and dfppy(pi), the lowest-unoccupied orbital locates primarily on pi* of pic for FIrpic and pi* of dfppy for FIracac. The luminescence of each complex originates from the lowest triplet excited state, which is assigned to the mixing of metal-to-ligand charge transfer and intraligand charge transfer characters. The effects of ancillary ligands pic and acac on absorption and emission spectra are observed by analysis of TDDFT results. The connection between the nature of excited states and the behavior of the complexes with different ancillary ligands is elucidated.     

Study on a set of bis-cyclometalated Ir(III) complexes with a common ancillary ligand

Bis-cyclometalated iridium(iii) complexes [Ir(F(2)ppy)(2)] (), [Ir(F(2)CNppy)(2)] (), [Ir(DMAF(2)ppy)(2)] () and [Ir(MeOF(2)ppy)(2)] () (F(2)ppy = 4',6'-difluoro-2-phenylpyridinate, F(2)CNppy = 5'-cyano-4',6'-difluoro-2-phenylpyridinate, DMAF(2)ppy = 4',6'-difluoro-4-dimethylamino-2-phenylpyridinate, MeOF(2)ppy = 4',6'-difluoro-4-methyl-2-phenylpyridinate and = 3,5-dimethylpyrazole-N-carboxamide) emitting in the sky blue region were synthesized. We studied the effect of the ancillary ligand and the substituents on the cyclometalating ligands on the crystal structures, photophysical and electrochemical properties and the frontier orbitals. Density functional theory (DFT) calculation results indicate that in and the cyclometalating ligands show negligible participation in the HOMO, the ancillary ligand being the main participant along with the Ir(iii) d-orbitals. exhibits the maximum photoluminescence quantum efficiency and radiative emission rates along with the dominant low frequency metal-ligand vibrations and maximum reorganization energy in the excited state. All the substituted complexes show more polar characteristics than , possessing the highest dipole moment among the complexes. The performances of the solution-synthesised organic light emitting devices (OLEDs) of , and doped in a blend of mCP (m-bis(N-carbazolylbenzene)) and polystyrene are studied.     

1,12-Diazaperylene and 2,11-dialkylated-1,12-diazaperylene iridium(iii) complexes [Ir(C^N)(2)(N^N)]PF(6): new supramolecular assemblies

A series of new monocationic iridium(iii) complexes [Ir(C^N)(2)(N^N)]PF(6) with "large-surface"α,α'-diimin ligands N^N (dap = 1,12-diazaperylene, dmedap = 2,11-dimethyl-1,12-diazaperylene, dipdap = 2,11-diisopropyl-1,12-diazaperylene) and different cyclometalating ligands C^N (piq = 1-phenylisoquinoline, bzq = benzo[h]quinoline, ppz = 1-phenylpyrazole, thpy = 2-(2-thienyl)pyridine, ppy = 2-phenylpyridine, meppy = 2-(4-methylphenyl)pyridine, dfppy = 2-(2,4-difluorophenyl)pyridine) were synthesized. The solid structures of the complexes [Ir(piq)(2)(dap)]PF(6), [Ir(bzq)(2)(dap)]PF(6), [Ir(ppy)(2)(dipdap)]PF(6), [Ir(piq)(2)(dmedap)]PF(6), [Ir(ppy)(2)(dap)]PF(6) and [Ir(ppz)(2)(dap)]PF(6) are reported. In [Ir(piq)(2)(dap)]PF(6), the dap ligand and one of the piq ligands of each cationic complex are involved in π-π stacking interactions forming supramolecular channels running along the crystallographic c axis. In the crystalline [Ir(bzq)(2)(dap)]PF(6)π-π stacking interactions between the metal complexes lead to the formation of a 2D layer structure. In addition, CH-π interactions were found in all compounds, which are what stabilizes the solid structure. In particular, a significant number of them were found in [Ir(piq)(2)(dap)]PF(6) and [Ir(bzq)(2)(dap)]PF(6). The crystal structures of [Ir(ppy)(2)(dipdap)]PF(6) and [Ir(ppy)(2)(dmedap)]PF(6) are also presented, being the first examples of bis-cyclometalated iridium(iii) complexes with phenanthroline-type α,α'-diimin ligands bearing bulky alkyl groups in the neighbourhood of the N-donor atoms. These ligands implicate a distorted octahedral coordination geometry that in turn destabilized the Ir-N(N^N) bonds. The new iridium(iii) complexes are not luminescent. All compounds show an electrochemically irreversible anodic peak between 1.15 and 1.58 V, which is influenced by the different cyclometalated ligands. All of the new complexes show two reversible successive one-electron "large-surface" ligand-centred reductions around -0.70 V and -1.30 V. Electrospray ionisation mass spectrometry (ESI-MS) and collision induced decomposition (CID) measurements were used to investigate the stability of the new complexes. Thereby, the stability agreed well with the order of the Ir-N(N^N) bond lengths.     

Insight into luminescent iridium complexes: Their potential in light-emitting electrochemical cells

Cyclometallated iridium complexes possess fascinating electrochemical and photophysical properties that make them excellent candidates for a variety of photonic and optoelectronic applications. In particular, light-emitting electrochemical cells (LEECs) based on iridium-containing ionic transition-metal complexes (Ir-iTMCs) are a promising alternative to conventional organic light-emitting diodes with several advantages, including a simpler device structure, solution processability, and reduced manufacturing costs. This review aims to provide a comprehensive and systematic overview of the current status of Ir-iTMC-based LEECs using the archetypal complex [Ir(ppy)₂(bpy)]PF₆ as a reference emitter. After a discussion of the device fundamentals and important photophysical and device parameters, key strategies for tuning the emission characteristics and device stability through LUMO and HOMO stabilization/destabilization are presented using numerous examples from the literature, with a particular focus on ligand modification with hydrophobic, electron-withdrawing, and electron-donating substituents, π-stacking interactions, and alternative ancillary and cyclometalated ligand skeletons. Comprehensive data tables summarizing the photophysical and LEEC properties of the various classes of iridium complexes reported to date are also provided. Finally, in an effort to highlight promising directions for future research, the current champion iridium complexes for fabricating state-of-the-art LEECs are identified, and the merits and limitations of existing approaches are discussed.     

Introduction of new ancillary ligands to the iridium complexes having 2,3-diphenylquinolinato ligands for OLED

We investigated the effect of an ancillary ligand (AL) on the emission color and luminous efficiencies of its complex, Ir(4-Me-2,3-dpq)₂(AL), where 4-Me-2,3-dpq represents 4-methyl-2,3-diphenylquinolinato ligand. We expected that ancillary ligand modification by introduction of the bulky substituent to the complexes might allow luminous efficiency increase by reduction of T–T annihilation. Furthermore, some ancillary ligands may contribute to fine-tuning of their complex emission colors by influencing the energy level of Ir d-orbitals upon the orbital mixing. As new ancillary ligands substituting for acac which is a typical AL in the iridium complexes, pyrazolone-based ligands, 4-R-5-methyl-2-phenyl-2,4-dihydro-pyrazol-3-one series (przl-R), were prepared, where R represents C₆H₅, C₆H₄CH₃ and C₆H₄Cl. These ligands were chelated to the iridium center to yield a new series of the iridium complexes, Ir(4-Me-2,3-dpq)₂(przl-R). The X-ray crystal structure of Ir(4-Me-2,3-dpq)₂(przl-C₆H₄Cl) was determined. The electrochemical and luminescence properties of the iridium complexes were investigated. The effect of the przl-substituents on the emission colors of the complexes was not significant. On the other hand, the luminous efficiencies of Ir(4-Me-2,3-dpq)₂(przl-C₆H₅) and Ir(4-Me-2,3-dpq)₂(przl-C₆H₄CH₃) were higher than that of Ir(4-Me-2,3-dpq)₂(acac).     

Synthesis,Structures and Photophysical Properties of Cationic Cyclometalated Iridium(III) Complexes Bearing N-Phenylcarbazole Group

Four cationic cyclometalated Ir^III complexes [(MeOPCz)₂Ir(bpy)]PF₆ ( 3 ), [(MeOPCz)₂Ir(dtb-bpy)]PF₆ ( 4 ), [(TFPCz)₂Ir(bpy)]PF₆ ( 5 ), and [(TFPCz)₂Ir(dtb-bpy)]PF₆ ( 6 ) were successfully synthesized using two new cyclometalated ligands 9-phenyl-3-(4-methoxypyridin-2-yl)-9H-carbazole (MeOPCz) 1 and 9-phenyl-3-(4-trifluoromethylpyridin-2-yl)-9H-carbazole (TFPCz) 2 in combination with 2,2'-bipyridine (bpy) and 4,4'-di-tert-butyl-2,2'-bipyridine (dtb-bpy) as ancillary ligands. These complexes adopt the distorted octahedral configuration, and the complexes 5 and 6 crystallize in the centrosymmetric space group C2/c. Emission wavelength of these complexes can be tuned from 583 nm to 628 nm by the substituents (methoxy, trifluoromethyl and tert-butyl groups) in ligands. All of these complexes show relatively high emission efficiencies (0.28–0.41) and short lifetimes (0.242–0.461 μs).     

Phosphorescent iridium(III) complex with an N^O ligand as a Hg(2+)-selective chemodosimeter and logic gate

Phosphorescent iridium(III) complexes have been attracting increasing attention in applications as luminescent chemosensors. However, no instance of an iridium(III) complex being used as a molecular logic gate has hitherto been reported. In the present study, two iridium(III) complexes, [Ir(ppy)(2)(PBT)] and [Ir(ppy)(2)(PBO)], have been synthesized (PBT, 2-(2-Hydroxyphenyl)-benzothiazole; PBO, 2-(2-hydroxyphenyl)-benzoxazole), and their chemical structures have been characterized by single-crystal X-ray analysis. Theoretical calculations and detailed studies of the photophysical and electrochemical properties of these two complexes have shown that the N^O ligands dominate their luminescence emission properties. Moreover, [Ir(ppy)(2)(PBT)], containing a sulfur atom in the N^O ligand, can serve as a highly selective chemodosimeter for Hg(2+) with ratiometric and naked-eye detection, which is associated with the dissociation of the N^O ligand PBT from the complex. Furthermore, complex [Ir(ppy)(2)(PBT)] has been further developed as an AND and INHIBIT logic gate with Hg(2+) and histidine as inputs.     

A cyclometalated iridium(III) complex with enhanced phosphorescence emission in the solid state (EPESS): synthesis, characterization and its application in bioimaging

Iridium(III) complexes with intense phosphorescence in solution have been widely applied in organic light-emitting diodes, chemosensors and bioimaging. However, little attention has been paid to iridium(III) complexes showing weak phosphorescence in solution and enhanced phosphorescence emission in the solid state (EPESS). In the present study, two β-diketonate ligands with different degrees of conjugation, 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (HL1) and 1-phenyl-3-methyl-4-phenylacetyl-5-pyrazolone (HL2), have been synthesized to be used as ancillary ligands for two iridium(III) complexes, Ir(ppy)(2)(L1) and Ir(ppy)(2)(L2) (Hppy = 2-phenylpyridine). The two complexes have been characterized by single-crystal X-ray crystallography, (1)H NMR and elemental analysis. Interestingly, Ir(ppy)(2)(L1) is EPESS-active whereas Ir(ppy)(2)(L2) exhibits moderately intense emission both in solution and as a neat film, indicating that the degree of conjugation of the β-diketone ligands determines the EPESS-activity. The single-crystal X-ray analysis has indicated that there are π-π interactions between the adjacent ppy ligands in Ir(ppy)(2)(L1) but not in Ir(ppy)(2)(L2). Finally, EPESS-active Ir(ppy)(2)(L1) has been successfully embedded in polymer nanoparticles and used as a luminescent label in bioimaging.     

Syntheses and characterizations of 5-nitro-2-(3′,5′-di(trifluoromethyl)phenyl)pyridyl-containing iridium(III) complexes and the two-band white photoluminescence properties in solution

A derivative of 2-phenylpyridine (Hppy), 5-nitro-2-(3′,5′-di(trifluoromethyl)phenyl)pyridine (HL), is prepared. The L-containing cyclometalated iridium(III) complexes with mono- and bidentate ancillary ligands, [Ir(L)₂(PPh₃)Cl] (1) and [Ir(L)₂(pic)] (2, pic = picolinic acid), are synthesized and characterized. The photoluminescence (PL) spectra of 1 and 2 in CH₂Cl₂ solutions show emission maxima at 558 and 560 nm, corresponding to yellow light emission with the Commission Internationale de L’éclairage (CIE) coordinates of (0.45, 0.54) and (0.46, 0.52), respectively. However, the luminescence intensity of 2 with PL quantum yield of 0.71 is obviously stronger that of 1 with PLQY of 0.19. The two-band white PL properties of 2 and [Ir(dfppy)₂(PPh₃)(NCS)] (3, dfppy = 2-(4,6-difluorophenyl)pyridine) with efficient blue light emission are investigated. The CH₂Cl₂ solutions of 2 and 3 in the molar ratio of 1?:?5 show white light emission with the CIE coordinates of (0.33, 0.41).     

Rational Design of Mono- and Bi-Nuclear Cyclometalated Ir(III) Complexes Containing Di-Pyridylamine Motifs: Synthesis,Structure, and Luminescent Properties

Heteroleptic cyclometalated iridium (III) complexes (1–3) containing di-pyridylamine motifs were prepared in a stepwise fashion. The presence of the di-pyridylamine ligands tunes their electronic and optical properties, generating blue phosphorescent emitters at room temperature. Herein we describe the synthesis of the mononuclear iridium complexes [Ir(ppy)₂(DPA)][OTf] (1), (ppy = phenylpyridine; DPA = Dipyridylamine) and [Ir(ppy)₂(DPA-PhI)][OTf] (2), (DPA-PhI = Dipyridylamino-phenyliodide). Moreover, the dinuclear iridium complex [Ir(ppy)₂(L)Ir(ppy)₂][OTf]₂ (3) containing a rigid angular ligand “L = 3,5-bis[4-(2,2′-dipyridylamino)phenylacetylenyl]toluene” and displaying two di-pyridylamino groups was also prepared. For comparison purposes, the related dinuclear rhodium complex [Rh (ppy)₂(L)Rh(ppy)₂][OTf]₂ (4) was also synthesized. The x-ray molecular structure of complex 2 was reported and confirmed the formation of the target molecule. The rhodium complex 4 was found to be emissive only at low temperature; in contrast, all iridium complexes 1–3 were found to be phosphorescent in solution at 77 K and room temperature, displaying blue emissions in the range of 478–481 nm.