Crown ether styryl dyes

A novel styryl dye containing benzodithia-18-crown-6 andN-(4-sulfobutyl)benzothiazolium fragments was synthesized. The complex formation of thecis-isomers of several photochromic styryl dyes containing dithia-15(18)-crown-5(6) fragments with Hg²⁺ and Mg²⁺ ions was studied. The stability constants of the complexes with Mg²⁺ and the relative stability constants of the complexes with Hg²⁺ (with respect to benzo-1,10-dithia-18-crown-6 ether) were measured. The fact that the stability constant increases 11-fold on going from thetrans- to the correspondingcis-isomer was attributed to the formation of an anion-“capped” complex. For Part 22, see Ref. 1. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2213–2220, December, 1997.     

A Thermodynamic Study Between 18-Crown-6 with Mg2+, Ca2+, Sr2+and Ba2+ Cations in Water–Methanol and Water–Ethanol Binary Mixtures Using The Conductometric Method

The complexation reactions between Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ cations with the macrocyclic ligand, 18-Crown-6 (l8C6) in water–methanol (MeOH) binary systems as well as the complexation reactions between Ca²⁺ and Sr²⁺ cations with 18C6 in water–ethanol (EtOH) binary mixtures have been studied at different temperatures using conductometric method. The conductance data show that the stoichiometry of all the complexes is 1:1. It was found that the stability of 18C6 complexes with Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ cations is sensitive to solvent composition and in all cases, a non-linear behaviour was observed for the variation of log K _f of the complexes versus the composition of the mixed solvents. In some cases, the stability order is changed with changing the composition of the mixed solvents. The selectivity order of 18C6 for the metal cations in pure methanol is: Ba²⁺ > Sr²⁺ > Ca²⁺ > Mg²⁺. The values of thermodynamic parameters (Δ H _c ° and Δ S _c °) for formation of 18C6–Mg²⁺, 18C6–Ca²⁺, 18C6–Sr²⁺ and 18C6–Ba²⁺complexes were obtained from temperature dependence of the stability constants. The obtained results show that the values of (Δ H _c ° and Δ S _c °) for formation of these complexes are quite sensitive to the nature and composition of the mixed solvent, but they do not vary monotonically with the solvent composition.This revised version was published online in July 2005 with a corrected issue number.     

Crown-containing styryl dyes

Styryl dyes containing a crown ether group and a heteroaromatic moiety with a sulfoalkylN-substituent (1a,b) undergo photocyclodimerization in acetonitrile in the presence of Mg(ClO₄)₂ to give only the typeA isomer of cyclobutane derivative (2a,b). The photochemical regio- and stereoselectivity of the cycloaddition is explained by self-organization of thetrans-isomers of the styryl dyes upon complexation with the Mg²⁺ cations into dimers with a fixed mutual arrangement of multiple bonds.For part 7, see ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1449–1452, August, 1993.     

Study of Complex Formation between N-Phenylaza-15-Crown-5 with Mg2+, Ca2+, Ag+ and Cd2+ Metal Cations in Some Binary Mixed Aqueous and Non-aqueous Solvents using the Conductometric Method

The complexation reactions between Mg²⁺, Ca²⁺, Ag⁺ and Cd²⁺ metal cations with N-phenylaza-15-crown-5 (Ph-N15C5) were studied in acetonitrile (AN)–methanol (MeOH), methanol (MeOH)–water (H₂O) and propanol (PrOH)–water (H₂O) binary mixtures at different temperatures using the conductometric method. The conductance data show that the stochiometry of all of the complexes with Mg²⁺, Ca²⁺, Ag⁺ and Cd²⁺ cations is 1:1 (L:M). The stability of the complexes is sensitive to the solvent composition and a non-linear behaviour was observed for variation of log K _f of the complexes versus the composition of the binary mixed solvents. The selectivity order of Ph-N15C5 for the metal cations in neat MeOH is Ag⁺>Cd²⁺>Ca²⁺>Mg²⁺, but in the case of neat AN is Ca²⁺>Cd²⁺>Mg²⁺>Ag⁺. The values of thermodynamic parameters (ΔH _c ^o , ΔS _c ^o ) for formation of Ph-N15C5–Mg²⁺, Ph-N15C5–Ca²⁺, Ph-N15C5–Ag⁺ and Ph-N15C5–Cd²⁺ complexes were obtained from temperature dependence of stability constants and the results show that the thermodynamics of complexation reactions is affected by the nature and composition of the mixed solvents.     

Study of Complex Formation Between Dicyclohexano-18-Crown-6 (DCH18C6) with Mg 2+, Ca2+, Sr 2+, and Ba2+ Cations in Methanol–Water Binary Mixtures Using Conductometric Method

The complexation reactions between Mg²⁺,Ca²⁺,Sr²⁺ and Ba²⁺ metal cations with macrocyclic ligand, dicyclohexano-18-crown-6 (DCH18C6) were studied in methanol (MeOH)–water (H₂O) binary mixtures at different temperatures using conductometric method . In all cases, DCH18C6 forms 1:1 complexes with these metal cations. The values of stability constants of complexes which were obtained from conductometric data show that the stability of complexes is affected by the nature and composition of the mixed solvents. While the variation of stability constants of DCH18C6-Sr ²⁺ and DCH18C6-Ba²⁺versus the composition of MeOH–H₂O mixed solvents is monotonic, an anomalous behavior was observed for variations of stability constants of DCH18C6-Mg²⁺ and DCH18C6-Ca²⁺ versus the composition of the mixed solvents. The values of thermodynamic parameters (ΔH_c°, ΔS_c°) for complexation reactions were obtained from temperature dependence of formation constants of complexes using the van’t Hoff plots. The results show that in most cases, the complexation reactions are enthalpy stabilized but entropy destabilized and the values of thermodynamic parameters are influenced by the nature and composition of the mixed solvents. The obtained results show that the order of selectivity of DCH18C6 ligand for metal cations in different concentrations of methanol in MeOH–H₂O binary system is: Ba²⁺>Sr²⁺>Ca²⁺> Mg²⁺.     

Crown-ether styryl dyes

The surface enhanced Raman scattering (SERS) spectra of styryl dyes containing a crown-ether group and a heteroaromatic residue with sulfoalkyl (1a) or alkyl (1b)N-substituent and of their complexes with Mg²⁺ cations were recorded in the 10^–4–10^–8 mol L^–1 concentration range. A model for the interaction of compoundsla,b with a silver surface during their adsorption on an electrochemically treated electrode was suggested. Fastcis-trans relaxation of the adsorbed molecules1a,b and complexes (1a,b)Mg²⁺ was found. It was shown that at [1a] = 10^–5 mol L^–1 and moderate molar ratios (C _Mg/[1a] = 3/1 to 9/1) in acetonitrile solutions, (trans-1a)Mg²⁺ complexes are joined into head-to-tail type dimers. An excess of Mg²⁺ cations (C_Mg/[1a] > 100) leads to dissociation of the dimers yielding (trans-1a)(Mg²⁺)₂ complexes. The formation of dimers from complexes (trans-1a)Mg²⁺ is accompanied by a substantial distortion of the planar structure oftrans-1a. This may be an important factor influencing the efficiency of photocycloaddition involving dimers of (trans-1a)Mg²⁺.For part 15, see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2429–2436, December, 1995.The work was carried out with financial support of the Russian Foundation for Basic Research (Project No. 94-03-08760) and, to some extent, of INTAS (Grant No. 93-1829) and of the International Science Foundation (Grant No. MHAOOO).     

Study on the synthesis of novel fluorescent macrocyclic sensors and their sensitive properties for Cu2+ and Fe3+ in aqueous solution

In this work, we synthesised and characterised three novel fluorescence macrocyclic sensors containing optically active dansyl groups. The studies for the interaction of the synthesised compounds with various mental ions (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ca²⁺, Ba²⁺, Pb²⁺, Zn²⁺, Co²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Cu²⁺, Mn²⁺, Cr³⁺, Al³⁺, Fe³⁺) were performed by fluorescence titration, Job’s plot, ESI-MS and DFT calculations. The results showed that the sensors 1a–1c displayed selective recognition for Cu²⁺ and Fe³⁺ ions and formed stoichiometry 1:1 complex through PET mechanism in DMSO/H₂O solution (1:1, v/v, pH 7.4 of HEPES). The binding constant (K) and detection limit were calculated.     

Gas phase and solution state stability of complexes L…M, where M = Cu, Ni, or Zn and L = R−C(O)NHOH (R = H, NH2, CH3, CF3, or Phenyl)

The structure and gas-phase metal affinities (M = Cu²⁺, Ni²⁺, and Zn²⁺) of formohydroxamic acid derivatives R–C(O)NHOH (R = H, NH₂, CH₃, CF₃ and Phenyl) were studied using the B3LYP/6-311+G(d,p) method of DFT theory. In order to evaluate the conformational behavior of these systems in water, we carried out CPCM-SCRF optimization calculations at the B3LYP/6-311+G(d,p) levels of theory. The obtained optimized geometries and interaction affinities of the gas and solution phase were compared. The following order of stability was found for ionic complexes of the transition metals: Cu²⁺ > Ni(t)²⁺ > Zn²⁺. The same stability order would be expected according to the Irving–Williams order of stability constants. The high-spin complexes of the Ni²⁺ were more stable than the low-spin complexes. The solvent effect reduced the observed relative stability of individual metallic complexes of substituted hydroxamic acids.     

Amino-substituted gem-diphosphonic acids: structures of complexes with divalent metal cations in aqueous solutions

A comparative study of complexation of acids R₂N(CH₂)_nCR"(PO₃H₂)₂ (R = H or Me; R" = OH or H; n = 1 or 2) with the Ca²⁺, Mg²⁺, Zn²⁺, and Cu²⁺ cations in aqueous solutions was carried out by vibrational (IR and Raman) and electronic spectroscopy using the data of ESR spectroscopy and conformational analysis (molecular mechanics). The MOPCPO chelate ring is formed in all ML and MHL complexes. The involvement of the N atom in coordination was found only in the Cu²⁺ complexes and is determined by the structure of the ligand. The relationship between the stability constants and the structures of the complexes in aqueous solutions is analyzed.     

A Conductometric Study of Complexation Reactions Between Dibenzo-18-Crown-6 (DB18C6) with Cu2+, Zn2+, Tl+ and Cd2+ Metal Cations in Dimethylsulfoxide–Ethylacetate Binary Mixtures

The complex formation between Cu²⁺, Zn²⁺, Tl⁺ and Cd²⁺ metal cations with macrocyclic ligand, dibenzo- 18-crown-6 (DB18C6) was studied in dimethylsulfoxide (DMSO)–ethylacetate (EtOAc) binary systems at different temperatures using conductometric method. In all cases, DB18C6 forms 1:1 complexes with these metal cations. The stability constants of the complexes were obtained from fitting of molar conductivity curves using a computer program, Genplot. The non-linear behaviour which was observed for variations of log K _f of the complexes versus the composition of the mixed solvent was discussed in terms of changing the chemical and physical properties of the constituent solvents when they mix with one another and, therefore, changing the solvation capacities of the metal cations, crown ether molecules and even the resulting complexes with changing the mixed solvent composition. The results show that the selectivity order of DB18C6 for the metal cations in pure ethylacetate and pure dimethylsulfoxide is: Tl⁺ > Cu²⁺ > Zn²⁺ > Cd²⁺ but the selectivity order is changed with the composition of the mixed solvents. The values of enthalpy changes (ΔH°_C) for complexation reactions were obtained from the slope of the van’t Hoff plots and the changes in standard enthalpy (ΔS°_C) were calculated from the relationship: ΔG°_C,298.15=ΔH°_C − 298.15 ΔS°_C. The obtained results show that in most cases, the complexes are enthalpy stabilized, but entropy destabilized and the values of ΔH°_C and ΔS°_C depend strongly on the nature of the medium.     

Conductance Studies on Complex Formation Between Aza-18-Crown-6 with Ag+, Hg2+ and Pb2+ Cations in DMSO–H2O Binary Solutions

The complexation reactions between Ag⁺, Hg²⁺ and Pb²⁺ metal cations with aza-18-crown-6 (A18C6) were studied in dimethylsulfoxide (DMSO)–water (H₂O) binary mixtures at different temperatures using the conductometric method. The conductance data show that the stoichiometry of the complexes in most cases is 1:1(ML), but in some cases 1:2 (ML₂) complexes are formed in solutions. A non-linear behaviour was observed for the variation of log K _f of the complexes vs. the composition of the binary mixed solvents. Selectivity of A18C6 for Ag⁺, Hg²⁺ and Pb²⁺ cations is sensitive to the solvent composition and in some cases and in certain compositions of the mixed solvent systems, the selectivity order is changed. The values of thermodynamic parameters (ΔH _c^o, ΔS _c^o) for formation of A18C6–Ag⁺, A18C6–Hg²⁺ and A18C6–Pb²⁺ complexes in DMSO–H₂O binary systems were obtained from temperature dependence of stability constants and the results show that the thermodynamics of complexation reactions is affected by the nature and composition of the mixed solvents.     

苯乙烯三嗪衍生物的合成及在重金属离子识别中的应用

合成了2,4-二(2-噻吩乙烯基)-6-(4'-N,N-二甲氨基苯乙烯基)-1,3,5-均三嗪(2)并鉴定了其结构。在乙腈-水混合介质中,化合物2在355和416nm处呈现双吸收峰,加入Cu²⁺,Hg²⁺ 和Fe³⁺ 后,均在520nm附近形成新的吸收峰。化合物2与Cu²⁺、Hg²⁺ 和Fe³⁺ 均形成1:1型配合物,其结合常数分别为1.9×10⁵L·mol^-1,6.6×10³L·mol^-1,2.7×10³L·mol^-1。对照化合物4与金属离子的光谱响应与化合物2相似,仅吸收峰的位置不同。因此,可认为化合物2和4中三嗪环中的N和噻吩环中的S与Cu²⁺、Hg²⁺ 和Fe³⁺ 共同配位形成了稳定的金属配合物。     

COMPETITIVE NMR STUDY OF THE COMPLEXATION OF SOME ALKALINE EARTH AND TRANSITION METAL IONS WITH 12-CROWN-4, 15-CROWN-5 AND BENZO-15-CROWN-5 IN ACETONITRILE SOLUTION USING THE LITHIUM-7 NUCLEUS AS A PROBE

Abstract

⁷Lithium NMR measurements were used to determine the stoichiometry and stability of Li⁺ complexes with 12-crown-4, 15-crown-5 and benzo-15-crown-5 in acetonitrile solution. A competitive ⁷Li NMR technique was also employed to probe the complexation of Mg²⁺, Ca²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Cd²⁺ ions with the same crown ethers. In all cases, the stability of the resulting 1:1 complexes was found to decrease in the order 15-crown-5 > benzo-15-crown-5 > 12-crown-4. Ca²⁺ and Cd²⁺ ions formed the most stable complexes in the series.     

Synthesis and Characterization of a Mg2+-Selective Probe Based on Benzoyl Hydrazine Derivative and Its Application in Cell Imaging

A simple benzoyl hydrazine derivative P was successfully synthesized and characterized as Mg²⁺-selective fluorescent probe. The binding of P with Mg²⁺ caused an obvious fluorescence enhancement at 482 nm. The fluorescent, UV-vis spectra, ¹H-NMR, and IR spectra confirmed the formation of P-Mg²⁺ complex, and the formation of a 1:1 stoichiometry complex was proved by Job’s plot and mass spectrometry. The recognition mechanism of P to Mg²⁺ was owing to the photoinduced electron transfer effect (PET). The fluorescent response was linear in the range of 0.9–4.0 µM with the detection limit of 0.3 µM Mg²⁺ in water–ethanol solution (1:9, v:v, pH10.0, 20 mM HEPES). In addition, the results of cell imaging of Mg²⁺ in Hl-7701 cells was satisfying.     

Comparison of Ca2+ and Mg2+ binding to calmodulin. An enthalpy,entropy, and gibbs free energy analysis

A consistent set of G _B , H _B , and S _B parameters have been determined from ion specific electrode, calorimetric, and spectrophotometric studies for the binding of Ca²⁺ and Mg²⁺ to bovine calmodulin at pH=7.0 and an ionic strength I of 0.113M. A non-linear least squares analysis of calcium specific ion electrode data yields, on a molar basis, four calcium dissociation constants: 10^–7 for the first site, 10^–5 for the fourth site, and two constants between these values. Both calorimetric experiments and an indicator method provide evidence that Mg²⁺ binds to calmodulin, probably at the same sites as Ca²⁺, but with affinities about 100 times smaller: 4×10^–5 for the first site and 2×10^–3 for the fourth. Calorimetric titrations on Ca²⁺ binding to calmodulin in three buffers are consistent with 0.46 protons released upon binding at all four sites and yield an average H _B per site of 5.6 and 7.9 kJ-mol^–1 for Ca²⁺ and Mg²⁺, respectively. The entropy of the system increases by 524 and 361 J-K^–1-mol^–1 when Ca²⁺ and Mg²⁺, respectively, bind to four sites on calmodulin, i.e., the selectivity of calmodulin for Ca²⁺ is primarily derived from entropy effects. Further analysis based on elimination of the entropy term for the metal ions demonstrates that calmodulin bound to Ca²⁺ has a larger entropy than the unbound calmodulin; the opposite is true for calmodulin bound to Mg²⁺. These analyses are consistent with the hypothesis that Ca²⁺ forms tight complexes at all sites on calmodulin and that release of waters of hydration upon binding is the source of the increase of entropy in the system.     

A Polarographic Study of Tl+, Pb2+ and Cd2+ Complexes with Aza-18-crown-6 and Dibenzopyridino-18-crown-6 in some Binary Mixed Non-aqueous Solvents

The complexation of Tl⁺, Pb²⁺and Cd²⁺ cations by macrocyclic ligands, aza-18-crown-6 (L1) and dibenzopyridino-18-crown-6 (L2) was studied in some binary mixtures of methanol (MeOH), n-propanol (n-PrOH), nitromethane (NM) and acetonitrile (AN) with dimethylformamide (DMF) at 22 °C using DC (direct current) and differential pulse polarographic techniques (DPP). The stoichiometry and stability constants of the complexes were determined by monitoring the shifts in half-waves or peak potentials of the polarographic waves of metal ions against the ligand concentration. In all of the solvent systems, the stability of the resulting 1:1 complexes was found to be L1 > L2. The selectivity order of the L2 ligand for the cations was found to be Pb²⁺ > Tl⁺ > Cd²⁺ and the selectivity of the L1 ligand for Pb²⁺ ion was greater than that of Tl⁺ ion. The results show that the stability of the complexes depends on the nature and composition of the mixed solvents. There is an inverse relationship between the stability constants of the complexes and the amount of dimethylformamide in the mixed solvent systems.     

A highly selective pyrene based fluorescent sensor toward Hg detection

A new pyrene-containing fluorescent sensor has been synthesized from 2,3,3-trimethylindolenine. Spectroscopic and photophysical properties of sensor are presented. The large change in fluorescence intensity (I/I₀ = 0.13) at 381 nm and affinity to Hg²⁺ over other cations such as K⁺, Na⁺, Ca²⁺, Mg²⁺, Pb²⁺, and Cu²⁺ make this compound a useful chemosensor for Hg²⁺ detection in hydrophilic media. The sensor (6.0 × 10⁻⁶ M) displays significant fluorescence quenching upon addition of Hg²⁺ in pH 7.4 HEPES buffer without excimer formation. Job’s plot analysis shows the binding stoichiometry to be 2:1 (host/guest).     

Phenylethylidene-3,4-dihydro-1H-quinoxalin-2-ones: promising building blocks for Cu recognition

A series of sulfonamido-substituted phenylethylidene-3,4-dihydro-1H-quinoxalin-2-one derivatives in which both of the fluorophore and ionophore are integrated into one structural unit, have been investigated. They all exhibit high selectivity toward Cu²⁺ in ethanol in the presence of other metallic ions (Zn²⁺, Mg²⁺, Co²⁺, Ni²⁺, Mn²⁺, Ca²⁺, and Ag⁺), as well as fast, stable, and reversible binding, as is evidenced by the observation of a red shift in the UV-vis spectrum, ‘ON-OFF’ fluorescence response. In addition, titration and MALDI-TOF measurements indicated that a 1:1 (and possibly also 2:1 (organic ligand: Cu²⁺) complexes were formed, depending on the relative amount of Cu²⁺ added to the solution of the organic ligand. It was also found that the binding constant could be tuned by modifying the nature and position of the substituents attached to the central benzene ring in the quinoxalone derivative. In acetonitrile, unlike in ethanol, these ligands undergo oxidation-decomposition by Cu²⁺ and therefore, no UV-vVis absorption bands could be observed. However, due to color change (from yellow to transparent) they could be useful as dosimeters in this solvent.     

Complex Formation of 1,10-Dibenzyl-1,10-diaza-18-crown-6 with Ni2+, Cu2+, Ag+ and Cd2+ Metal Cations in Acetonitrile–dimethylformamide Binary Solutions

Conductance measurements are reported for nickel(II), cupper(II), silver(I) and cadmium(II), salts in acetonitrile (AN)–dimethylformamide (DMF) binary solvents containing macrocyclic ligand, 1,10-dibenzyl-1,10-diaza-18-crown-6 (DBDA18C6) at different temperatures. The changes in molar conductance caused by addition of DBDA18C6 to solutions were analyzed by non-linear least squares to give stability constants of 1:1 metal cation–DBDA18C6 complexes. The results show that the stabilities of the complexes are sensitive to solvent composition and in some cases the sequence of stabilities is changed with changing the composition of the mixed solvents. The values of thermodynamic quantities (ΔH°c and ΔS°c) for formation of DBDA18C6-Ni²⁺, DBDA18C6-Cu²⁺, DBDA18C6-Ag⁺ and DBDA18C6-Cd²⁺ complexes were obtained from temperature dependence of the stability constants and the results show that the values of ΔH°c and ΔS°c for these complexes are sensitive to the nature and composition of AN–DMF binary solutions, but they do not vary monotonically with the solvent composition.     

Conformationally regulated fluorescent sensors. Study of the selectivity in Zn versus Cd sensing

The Zn²⁺ and Cd²⁺ complexing properties of four ligands containing a 4,4′-substituted biphenyl moiety are described. Ligands 1 and 3, containing only one 1-aza-18-crown-6 cavity, lead to selective complexation of Cd²⁺ versus Zn²⁺. Ligand 4, with two crown cavities linked to a tetramethylbenzidine unit, is able to form 1:1 complexes with Zn²⁺ and Cd²⁺, showing a higher complexing constant with Zn²⁺ than with Cd²⁺, probably due to enthalpic factors. Several complementary experiments suggest that the 1:1 complexes formed by ligand 4 involve both crown cavities acting together to give rise to clamp structures. The formation of this type of zinc complex gives rise to red shifted emission bands and distinct quenching of the fluorescence. A similar situation is observed with cadmium but the change is then less pronounced. When mixtures of both salts are used, ligand 4 selectively responds to zinc. Finally, ligand 2, which also has two crown cavities but contains nitro rather than amino groups in the biphenyl moiety, shows no propensity to form clamp complexes and, for this reason, it complexes cadmium much more strongly than zinc and binds the former selectively when mixtures of both salts are used in complexing experiments.